Merge branch 'next' into for-linus

Prepare input updates for 5.4 merge window.

65 files changed, 5910 insertions, 814 deletions

diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
index 0b3a906b3bf5..971426bb4302 100644
--- a/drivers/platform/Kconfig
+++ b/drivers/platform/Kconfig
@@ -11,3 +11,5 @@ source "drivers/platform/goldfish/Kconfig"
 source "drivers/platform/chrome/Kconfig"
 
 source "drivers/platform/mellanox/Kconfig"
+
+source "drivers/platform/olpc/Kconfig"
diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile
index 4b2ce58bcd9c..6fda58c021ca 100644
--- a/drivers/platform/Makefile
+++ b/drivers/platform/Makefile
@@ -6,6 +6,6 @@
 obj-$(CONFIG_X86)		+= x86/
 obj-$(CONFIG_MELLANOX_PLATFORM)	+= mellanox/
 obj-$(CONFIG_MIPS)		+= mips/
-obj-$(CONFIG_OLPC)		+= olpc/
+obj-$(CONFIG_OLPC_EC)		+= olpc/
 obj-$(CONFIG_GOLDFISH)		+= goldfish/
 obj-$(CONFIG_CHROME_PLATFORMS)	+= chrome/
diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
index 2826f7136f65..970679d0b6f6 100644
--- a/drivers/platform/chrome/Kconfig
+++ b/drivers/platform/chrome/Kconfig
@@ -72,6 +72,19 @@ config CROS_EC_RPMSG
 	  To compile this driver as a module, choose M here: the
 	  module will be called cros_ec_rpmsg.
 
+config CROS_EC_ISHTP
+	tristate "ChromeOS Embedded Controller (ISHTP)"
+	depends on MFD_CROS_EC
+	depends on INTEL_ISH_HID
+	help
+	  If you say Y here, you get support for talking to the ChromeOS EC
+	  firmware running on Intel Integrated Sensor Hub (ISH), using the
+	  ISH Transport protocol (ISH-TP). This uses a simple byte-level
+	  protocol with a checksum.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cros_ec_ishtp.
+
 config CROS_EC_SPI
 	tristate "ChromeOS Embedded Controller (SPI)"
 	depends on MFD_CROS_EC && SPI
@@ -83,28 +96,17 @@ config CROS_EC_SPI
 	  'pre-amble' bytes before the response actually starts.
 
 config CROS_EC_LPC
-        tristate "ChromeOS Embedded Controller (LPC)"
-        depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST)
-        help
-          If you say Y here, you get support for talking to the ChromeOS EC
-          over an LPC bus. This uses a simple byte-level protocol with a
-          checksum. This is used for userspace access only. The kernel
-          typically has its own communication methods.
-
-          To compile this driver as a module, choose M here: the
-          module will be called cros_ec_lpc.
-
-config CROS_EC_LPC_MEC
-	bool "ChromeOS Embedded Controller LPC Microchip EC (MEC) variant"
-	depends on CROS_EC_LPC
-	default n
+	tristate "ChromeOS Embedded Controller (LPC)"
+	depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST)
 	help
-	  If you say Y here, a variant LPC protocol for the Microchip EC
-	  will be used. Note that this variant is not backward compatible
-	  with non-Microchip ECs.
+	  If you say Y here, you get support for talking to the ChromeOS EC
+	  over an LPC bus, including the LPC Microchip EC (MEC) variant.
+	  This uses a simple byte-level protocol with a checksum. This is
+	  used for userspace access only. The kernel typically has its own
+	  communication methods.
 
-	  If you have a ChromeOS Embedded Controller Microchip EC variant
-	  choose Y here.
+	  To compile this driver as a module, choose M here: the
+	  module will be called cros_ec_lpcs.
 
 config CROS_EC_PROTO
         bool
diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
index 1b2f1dcfcd5c..fd0af05cc14c 100644
--- a/drivers/platform/chrome/Makefile
+++ b/drivers/platform/chrome/Makefile
@@ -7,10 +7,10 @@ obj-$(CONFIG_CHROMEOS_LAPTOP)		+= chromeos_laptop.o
 obj-$(CONFIG_CHROMEOS_PSTORE)		+= chromeos_pstore.o
 obj-$(CONFIG_CHROMEOS_TBMC)		+= chromeos_tbmc.o
 obj-$(CONFIG_CROS_EC_I2C)		+= cros_ec_i2c.o
+obj-$(CONFIG_CROS_EC_ISHTP)		+= cros_ec_ishtp.o
 obj-$(CONFIG_CROS_EC_RPMSG)		+= cros_ec_rpmsg.o
 obj-$(CONFIG_CROS_EC_SPI)		+= cros_ec_spi.o
-cros_ec_lpcs-objs			:= cros_ec_lpc.o cros_ec_lpc_reg.o
-cros_ec_lpcs-$(CONFIG_CROS_EC_LPC_MEC)	+= cros_ec_lpc_mec.o
+cros_ec_lpcs-objs			:= cros_ec_lpc.o cros_ec_lpc_mec.o
 obj-$(CONFIG_CROS_EC_LPC)		+= cros_ec_lpcs.o
 obj-$(CONFIG_CROS_EC_PROTO)		+= cros_ec_proto.o cros_ec_trace.o
 obj-$(CONFIG_CROS_KBD_LED_BACKLIGHT)	+= cros_kbd_led_backlight.o
diff --git a/drivers/platform/chrome/cros_ec_debugfs.c b/drivers/platform/chrome/cros_ec_debugfs.c
index 4c2a27f6a6d0..8ec1cc2889f2 100644
--- a/drivers/platform/chrome/cros_ec_debugfs.c
+++ b/drivers/platform/chrome/cros_ec_debugfs.c
@@ -25,7 +25,8 @@
 
 #define CIRC_ADD(idx, size, value)	(((idx) + (value)) & ((size) - 1))
 
-/* struct cros_ec_debugfs - ChromeOS EC debugging information
+/**
+ * struct cros_ec_debugfs - EC debugging information.
  *
  * @ec: EC device this debugfs information belongs to
  * @dir: dentry for debugfs files
@@ -241,7 +242,35 @@ static ssize_t cros_ec_pdinfo_read(struct file *file,
 				       read_buf, p - read_buf);
 }
 
-const struct file_operations cros_ec_console_log_fops = {
+static ssize_t cros_ec_uptime_read(struct file *file, char __user *user_buf,
+				   size_t count, loff_t *ppos)
+{
+	struct cros_ec_debugfs *debug_info = file->private_data;
+	struct cros_ec_device *ec_dev = debug_info->ec->ec_dev;
+	struct {
+		struct cros_ec_command cmd;
+		struct ec_response_uptime_info resp;
+	} __packed msg = {};
+	struct ec_response_uptime_info *resp;
+	char read_buf[32];
+	int ret;
+
+	resp = (struct ec_response_uptime_info *)&msg.resp;
+
+	msg.cmd.command = EC_CMD_GET_UPTIME_INFO;
+	msg.cmd.insize = sizeof(*resp);
+
+	ret = cros_ec_cmd_xfer_status(ec_dev, &msg.cmd);
+	if (ret < 0)
+		return ret;
+
+	ret = scnprintf(read_buf, sizeof(read_buf), "%u\n",
+			resp->time_since_ec_boot_ms);
+
+	return simple_read_from_buffer(user_buf, count, ppos, read_buf, ret);
+}
+
+static const struct file_operations cros_ec_console_log_fops = {
 	.owner = THIS_MODULE,
 	.open = cros_ec_console_log_open,
 	.read = cros_ec_console_log_read,
@@ -250,13 +279,20 @@ const struct file_operations cros_ec_console_log_fops = {
 	.release = cros_ec_console_log_release,
 };
 
-const struct file_operations cros_ec_pdinfo_fops = {
+static const struct file_operations cros_ec_pdinfo_fops = {
 	.owner = THIS_MODULE,
 	.open = simple_open,
 	.read = cros_ec_pdinfo_read,
 	.llseek = default_llseek,
 };
 
+static const struct file_operations cros_ec_uptime_fops = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.read = cros_ec_uptime_read,
+	.llseek = default_llseek,
+};
+
 static int ec_read_version_supported(struct cros_ec_dev *ec)
 {
 	struct ec_params_get_cmd_versions_v1 *params;
@@ -408,6 +444,12 @@ static int cros_ec_debugfs_probe(struct platform_device *pd)
 	debugfs_create_file("pdinfo", 0444, debug_info->dir, debug_info,
 			    &cros_ec_pdinfo_fops);
 
+	debugfs_create_file("uptime", 0444, debug_info->dir, debug_info,
+			    &cros_ec_uptime_fops);
+
+	debugfs_create_x32("last_resume_result", 0444, debug_info->dir,
+			   &ec->ec_dev->last_resume_result);
+
 	ec->debug_info = debug_info;
 
 	dev_set_drvdata(&pd->dev, ec);
diff --git a/drivers/platform/chrome/cros_ec_ishtp.c b/drivers/platform/chrome/cros_ec_ishtp.c
new file mode 100644
index 000000000000..e504d255d5ce
--- /dev/null
+++ b/drivers/platform/chrome/cros_ec_ishtp.c
@@ -0,0 +1,763 @@
+// SPDX-License-Identifier: GPL-2.0
+// ISHTP interface for ChromeOS Embedded Controller
+//
+// Copyright (c) 2019, Intel Corporation.
+//
+// ISHTP client driver for talking to the Chrome OS EC firmware running
+// on Intel Integrated Sensor Hub (ISH) using the ISH Transport protocol
+// (ISH-TP).
+
+#include <linux/delay.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/intel-ish-client-if.h>
+
+/*
+ * ISH TX/RX ring buffer pool size
+ *
+ * The AP->ISH messages and corresponding ISH->AP responses are
+ * serialized. We need 1 TX and 1 RX buffer for these.
+ *
+ * The MKBP ISH->AP events are serialized. We need one additional RX
+ * buffer for them.
+ */
+#define CROS_ISH_CL_TX_RING_SIZE		8
+#define CROS_ISH_CL_RX_RING_SIZE		8
+
+/* ISH CrOS EC Host Commands */
+enum cros_ec_ish_channel {
+	CROS_EC_COMMAND = 1,			/* AP->ISH message */
+	CROS_MKBP_EVENT = 2,			/* ISH->AP events */
+};
+
+/*
+ * ISH firmware timeout for 1 message send failure is 1Hz, and the
+ * firmware will retry 2 times, so 3Hz is used for timeout.
+ */
+#define ISHTP_SEND_TIMEOUT			(3 * HZ)
+
+/* ISH Transport CrOS EC ISH client unique GUID */
+static const guid_t cros_ish_guid =
+	GUID_INIT(0x7b7154d0, 0x56f4, 0x4bdc,
+		  0xb0, 0xd8, 0x9e, 0x7c, 0xda,	0xe0, 0xd6, 0xa0);
+
+struct header {
+	u8 channel;
+	u8 status;
+	u8 reserved[2];
+} __packed;
+
+struct cros_ish_out_msg {
+	struct header hdr;
+	struct ec_host_request ec_request;
+} __packed;
+
+struct cros_ish_in_msg {
+	struct header hdr;
+	struct ec_host_response ec_response;
+} __packed;
+
+#define IN_MSG_EC_RESPONSE_PREAMBLE					\
+	offsetof(struct cros_ish_in_msg, ec_response)
+
+#define OUT_MSG_EC_REQUEST_PREAMBLE					\
+	offsetof(struct cros_ish_out_msg, ec_request)
+
+#define cl_data_to_dev(client_data) ishtp_device((client_data)->cl_device)
+
+/*
+ * The Read-Write Semaphore is used to prevent message TX or RX while
+ * the ishtp client is being initialized or undergoing reset.
+ *
+ * The readers are the kernel function calls responsible for IA->ISH
+ * and ISH->AP messaging.
+ *
+ * The writers are .reset() and .probe() function.
+ */
+DECLARE_RWSEM(init_lock);
+
+/**
+ * struct response_info - Encapsulate firmware response related
+ * information for passing between function ish_send() and
+ * process_recv() callback.
+ *
+ * @data: Copy the data received from firmware here.
+ * @max_size: Max size allocated for the @data buffer. If the received
+ * data exceeds this value, we log an error.
+ * @size: Actual size of data received from firmware.
+ * @error: 0 for success, negative error code for a failure in process_recv().
+ * @received: Set to true on receiving a valid firmware	response to host command
+ * @wait_queue: Wait queue for host to wait for firmware response.
+ */
+struct response_info {
+	void *data;
+	size_t max_size;
+	size_t size;
+	int error;
+	bool received;
+	wait_queue_head_t wait_queue;
+};
+
+/**
+ * struct ishtp_cl_data - Encapsulate per ISH TP Client.
+ *
+ * @cros_ish_cl: ISHTP firmware client instance.
+ * @cl_device: ISHTP client device instance.
+ * @response: Response info passing between ish_send() and process_recv().
+ * @work_ishtp_reset: Work queue reset handling.
+ * @work_ec_evt: Work queue for EC events.
+ * @ec_dev: CrOS EC MFD device.
+ *
+ * This structure is used to store per client data.
+ */
+struct ishtp_cl_data {
+	struct ishtp_cl *cros_ish_cl;
+	struct ishtp_cl_device *cl_device;
+
+	/*
+	 * Used for passing firmware response information between
+	 * ish_send() and process_recv() callback.
+	 */
+	struct response_info response;
+
+	struct work_struct work_ishtp_reset;
+	struct work_struct work_ec_evt;
+	struct cros_ec_device *ec_dev;
+};
+
+/**
+ * ish_evt_handler - ISH to AP event handler
+ * @work: Work struct
+ */
+static void ish_evt_handler(struct work_struct *work)
+{
+	struct ishtp_cl_data *client_data =
+		container_of(work, struct ishtp_cl_data, work_ec_evt);
+	struct cros_ec_device *ec_dev = client_data->ec_dev;
+
+	if (cros_ec_get_next_event(ec_dev, NULL) > 0) {
+		blocking_notifier_call_chain(&ec_dev->event_notifier,
+					     0, ec_dev);
+	}
+}
+
+/**
+ * ish_send() - Send message from host to firmware
+ *
+ * @client_data: Client data instance
+ * @out_msg: Message buffer to be sent to firmware
+ * @out_size: Size of out going message
+ * @in_msg: Message buffer where the incoming data is copied. This buffer
+ * is allocated by calling
+ * @in_size: Max size of incoming message
+ *
+ * Return: Number of bytes copied in the in_msg on success, negative
+ * error code on failure.
+ */
+static int ish_send(struct ishtp_cl_data *client_data,
+		    u8 *out_msg, size_t out_size,
+		    u8 *in_msg, size_t in_size)
+{
+	int rv;
+	struct header *out_hdr = (struct header *)out_msg;
+	struct ishtp_cl *cros_ish_cl = client_data->cros_ish_cl;
+
+	dev_dbg(cl_data_to_dev(client_data),
+		"%s: channel=%02u status=%02u\n",
+		__func__, out_hdr->channel, out_hdr->status);
+
+	/* Setup for incoming response */
+	client_data->response.data = in_msg;
+	client_data->response.max_size = in_size;
+	client_data->response.error = 0;
+	client_data->response.received = false;
+
+	rv = ishtp_cl_send(cros_ish_cl, out_msg, out_size);
+	if (rv) {
+		dev_err(cl_data_to_dev(client_data),
+			"ishtp_cl_send error %d\n", rv);
+		return rv;
+	}
+
+	wait_event_interruptible_timeout(client_data->response.wait_queue,
+					 client_data->response.received,
+					 ISHTP_SEND_TIMEOUT);
+	if (!client_data->response.received) {
+		dev_err(cl_data_to_dev(client_data),
+			"Timed out for response to host message\n");
+		return -ETIMEDOUT;
+	}
+
+	if (client_data->response.error < 0)
+		return client_data->response.error;
+
+	return client_data->response.size;
+}
+
+/**
+ * process_recv() - Received and parse incoming packet
+ * @cros_ish_cl: Client instance to get stats
+ * @rb_in_proc: Host interface message buffer
+ *
+ * Parse the incoming packet. If it is a response packet then it will
+ * update per instance flags and wake up the caller waiting to for the
+ * response. If it is an event packet then it will schedule event work.
+ */
+static void process_recv(struct ishtp_cl *cros_ish_cl,
+			 struct ishtp_cl_rb *rb_in_proc)
+{
+	size_t data_len = rb_in_proc->buf_idx;
+	struct ishtp_cl_data *client_data =
+		ishtp_get_client_data(cros_ish_cl);
+	struct device *dev = cl_data_to_dev(client_data);
+	struct cros_ish_in_msg *in_msg =
+		(struct cros_ish_in_msg *)rb_in_proc->buffer.data;
+
+	/* Proceed only if reset or init is not in progress */
+	if (!down_read_trylock(&init_lock)) {
+		/* Free the buffer */
+		ishtp_cl_io_rb_recycle(rb_in_proc);
+		dev_warn(dev,
+			 "Host is not ready to receive incoming messages\n");
+		return;
+	}
+
+	/*
+	 * All firmware messages contain a header. Check the buffer size
+	 * before accessing elements inside.
+	 */
+	if (!rb_in_proc->buffer.data) {
+		dev_warn(dev, "rb_in_proc->buffer.data returned null");
+		client_data->response.error = -EBADMSG;
+		goto end_error;
+	}
+
+	if (data_len < sizeof(struct header)) {
+		dev_err(dev, "data size %zu is less than header %zu\n",
+			data_len, sizeof(struct header));
+		client_data->response.error = -EMSGSIZE;
+		goto end_error;
+	}
+
+	dev_dbg(dev, "channel=%02u status=%02u\n",
+		in_msg->hdr.channel, in_msg->hdr.status);
+
+	switch (in_msg->hdr.channel) {
+	case CROS_EC_COMMAND:
+		/* Sanity check */
+		if (!client_data->response.data) {
+			dev_err(dev,
+				"Receiving buffer is null. Should be allocated by calling function\n");
+			client_data->response.error = -EINVAL;
+			goto error_wake_up;
+		}
+
+		if (client_data->response.received) {
+			dev_err(dev,
+				"Previous firmware message not yet processed\n");
+			client_data->response.error = -EINVAL;
+			goto error_wake_up;
+		}
+
+		if (data_len > client_data->response.max_size) {
+			dev_err(dev,
+				"Received buffer size %zu is larger than allocated buffer %zu\n",
+				data_len, client_data->response.max_size);
+			client_data->response.error = -EMSGSIZE;
+			goto error_wake_up;
+		}
+
+		if (in_msg->hdr.status) {
+			dev_err(dev, "firmware returned status %d\n",
+				in_msg->hdr.status);
+			client_data->response.error = -EIO;
+			goto error_wake_up;
+		}
+
+		/* Update the actual received buffer size */
+		client_data->response.size = data_len;
+
+		/*
+		 * Copy the buffer received in firmware response for the
+		 * calling thread.
+		 */
+		memcpy(client_data->response.data,
+		       rb_in_proc->buffer.data, data_len);
+
+		/* Set flag before waking up the caller */
+		client_data->response.received = true;
+error_wake_up:
+		/* Wake the calling thread */
+		wake_up_interruptible(&client_data->response.wait_queue);
+
+		break;
+
+	case CROS_MKBP_EVENT:
+		/* The event system doesn't send any data in buffer */
+		schedule_work(&client_data->work_ec_evt);
+
+		break;
+
+	default:
+		dev_err(dev, "Invalid channel=%02d\n", in_msg->hdr.channel);
+	}
+
+end_error:
+	/* Free the buffer */
+	ishtp_cl_io_rb_recycle(rb_in_proc);
+
+	up_read(&init_lock);
+}
+
+/**
+ * ish_event_cb() - bus driver callback for incoming message
+ * @cl_device: ISHTP client device for which this message is targeted.
+ *
+ * Remove the packet from the list and process the message by calling
+ * process_recv.
+ */
+static void ish_event_cb(struct ishtp_cl_device *cl_device)
+{
+	struct ishtp_cl_rb *rb_in_proc;
+	struct ishtp_cl	*cros_ish_cl = ishtp_get_drvdata(cl_device);
+
+	while ((rb_in_proc = ishtp_cl_rx_get_rb(cros_ish_cl)) != NULL) {
+		/* Decide what to do with received data */
+		process_recv(cros_ish_cl, rb_in_proc);
+	}
+}
+
+/**
+ * cros_ish_init() - Init function for ISHTP client
+ * @cros_ish_cl: ISHTP client instance
+ *
+ * This function complete the initializtion of the client.
+ *
+ * Return: 0 for success, negative error code for failure.
+ */
+static int cros_ish_init(struct ishtp_cl *cros_ish_cl)
+{
+	int rv;
+	struct ishtp_device *dev;
+	struct ishtp_fw_client *fw_client;
+	struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl);
+
+	rv = ishtp_cl_link(cros_ish_cl);
+	if (rv) {
+		dev_err(cl_data_to_dev(client_data),
+			"ishtp_cl_link failed\n");
+		return rv;
+	}
+
+	dev = ishtp_get_ishtp_device(cros_ish_cl);
+
+	/* Connect to firmware client */
+	ishtp_set_tx_ring_size(cros_ish_cl, CROS_ISH_CL_TX_RING_SI