diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2016-05-03 14:49:46 -0700 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2016-05-03 14:49:46 -0700 |
commit | e6c037bfcafad1b401a6c02ba05a3f1b87925860 (patch) | |
tree | 572f796d9ca71afb4ecd776a7f9dca0c3b3ca306 /drivers/phy | |
parent | 681fef8380eb818c0b845fca5d2ab1dcbab114ee (diff) | |
parent | 71f5c63c07e5be7abdce40891778ffbf3cec04f0 (diff) |
Merge tag 'phy-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-testing
Kishon writes:
phy: for 4.7
*) Add a new PHY driver for USB2 PHY on Northstar SoC
*) Add support for Broadcom NS2 SATA3 PHY in existing
Broadcom SATA3 PHY driver
*) Add support for MIPI DPHYs in Exynos5420-compatible
(5420, 5422 and 5800) and Exynos5433 SoCs
*) Add support for USB3 PHY on mt2701
*) Add extcon support for Renesas R-car USB2 PHY driver
*) Misc cleanups
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy')
-rw-r--r-- | drivers/phy/Kconfig | 30 | ||||
-rw-r--r-- | drivers/phy/Makefile | 3 | ||||
-rw-r--r-- | drivers/phy/phy-bcm-ns-usb2.c | 137 | ||||
-rw-r--r-- | drivers/phy/phy-brcm-sata.c | 412 | ||||
-rw-r--r-- | drivers/phy/phy-brcmstb-sata.c | 250 | ||||
-rw-r--r-- | drivers/phy/phy-exynos-mipi-video.c | 321 | ||||
-rw-r--r-- | drivers/phy/phy-mt65xx-usb3.c | 77 | ||||
-rw-r--r-- | drivers/phy/phy-rcar-gen2.c | 1 | ||||
-rw-r--r-- | drivers/phy/phy-rcar-gen3-usb2.c | 88 | ||||
-rw-r--r-- | drivers/phy/phy-rockchip-usb.c | 2 |
10 files changed, 950 insertions, 371 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index e92b97cd6056..a83ed81d8df8 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -15,6 +15,15 @@ config GENERIC_PHY phy users can obtain reference to the PHY. All the users of this framework should select this config. +config PHY_BCM_NS_USB2 + tristate "Broadcom Northstar USB 2.0 PHY Driver" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support Broadcom USB 2.0 PHY connected to the USB + controller on Northstar family. + config PHY_BERLIN_USB tristate "Marvell Berlin USB PHY Driver" depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF @@ -113,14 +122,15 @@ config PHY_MIPHY365X config PHY_RCAR_GEN2 tristate "Renesas R-Car generation 2 USB PHY driver" - depends on ARCH_SHMOBILE + depends on ARCH_RENESAS depends on GENERIC_PHY help Support for USB PHY found on Renesas R-Car generation 2 SoCs. config PHY_RCAR_GEN3_USB2 tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" - depends on OF && ARCH_SHMOBILE + depends on ARCH_RENESAS + depends on EXTCON select GENERIC_PHY help Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. @@ -218,9 +228,8 @@ config PHY_MT65XX_USB3 depends on ARCH_MEDIATEK && OF select GENERIC_PHY help - Say 'Y' here to add support for Mediatek USB3.0 PHY driver - for mt65xx SoCs. it supports two usb2.0 ports and - one usb3.0 port. + Say 'Y' here to add support for Mediatek USB3.0 PHY driver, + it supports multiple usb2.0 and usb3.0 ports. config PHY_HI6220_USB tristate "hi6220 USB PHY support" @@ -404,14 +413,15 @@ config PHY_TUSB1210 help Support for TI TUSB1210 USB ULPI PHY. -config PHY_BRCMSTB_SATA - tristate "Broadcom STB SATA PHY driver" - depends on ARCH_BRCMSTB || BMIPS_GENERIC +config PHY_BRCM_SATA + tristate "Broadcom SATA PHY driver" + depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST depends on OF select GENERIC_PHY + default ARCH_BCM_IPROC help - Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs. - Likely useful only with CONFIG_SATA_BRCMSTB enabled. + Enable this to support the Broadcom SATA PHY. + If unsure, say N. config PHY_CYGNUS_PCIE tristate "Broadcom Cygnus PCIe PHY driver" diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 24596a96a887..0de09e13fdbc 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_GENERIC_PHY) += phy-core.o +obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o @@ -49,6 +50,6 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o -obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o +obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o diff --git a/drivers/phy/phy-bcm-ns-usb2.c b/drivers/phy/phy-bcm-ns-usb2.c new file mode 100644 index 000000000000..95ab6b2a0de5 --- /dev/null +++ b/drivers/phy/phy-bcm-ns-usb2.c @@ -0,0 +1,137 @@ +/* + * Broadcom Northstar USB 2.0 PHY Driver + * + * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/bcma/bcma.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +struct bcm_ns_usb2 { + struct device *dev; + struct clk *ref_clk; + struct phy *phy; + void __iomem *dmu; +}; + +static int bcm_ns_usb2_phy_init(struct phy *phy) +{ + struct bcm_ns_usb2 *usb2 = phy_get_drvdata(phy); + struct device *dev = usb2->dev; + void __iomem *dmu = usb2->dmu; + u32 ref_clk_rate, usb2ctl, usb_pll_ndiv, usb_pll_pdiv; + int err = 0; + + err = clk_prepare_enable(usb2->ref_clk); + if (err < 0) { + dev_err(dev, "Failed to prepare ref clock: %d\n", err); + goto err_out; + } + + ref_clk_rate = clk_get_rate(usb2->ref_clk); + if (!ref_clk_rate) { + dev_err(dev, "Failed to get ref clock rate\n"); + err = -EINVAL; + goto err_clk_off; + } + + usb2ctl = readl(dmu + BCMA_DMU_CRU_USB2_CONTROL); + + if (usb2ctl & BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK) { + usb_pll_pdiv = usb2ctl; + usb_pll_pdiv &= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK; + usb_pll_pdiv >>= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT; + } else { + usb_pll_pdiv = 1 << 3; + } + + /* Calculate ndiv based on a solid 1920 MHz that is for USB2 PHY */ + usb_pll_ndiv = (1920000000 * usb_pll_pdiv) / ref_clk_rate; + + /* Unlock DMU PLL settings with some magic value */ + writel(0x0000ea68, dmu + BCMA_DMU_CRU_CLKSET_KEY); + + /* Write USB 2.0 PLL control setting */ + usb2ctl &= ~BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK; + usb2ctl |= usb_pll_ndiv << BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT; + writel(usb2ctl, dmu + BCMA_DMU_CRU_USB2_CONTROL); + + /* Lock DMU PLL settings */ + writel(0x00000000, dmu + BCMA_DMU_CRU_CLKSET_KEY); + +err_clk_off: + clk_disable_unprepare(usb2->ref_clk); +err_out: + return err; +} + +static const struct phy_ops ops = { + .init = bcm_ns_usb2_phy_init, + .owner = THIS_MODULE, +}; + +static int bcm_ns_usb2_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct bcm_ns_usb2 *usb2; + struct resource *res; + struct phy_provider *phy_provider; + + usb2 = devm_kzalloc(&pdev->dev, sizeof(*usb2), GFP_KERNEL); + if (!usb2) + return -ENOMEM; + usb2->dev = dev; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmu"); + usb2->dmu = devm_ioremap_resource(dev, res); + if (IS_ERR(usb2->dmu)) { + dev_err(dev, "Failed to map DMU regs\n"); + return PTR_ERR(usb2->dmu); + } + + usb2->ref_clk = devm_clk_get(dev, "phy-ref-clk"); + if (IS_ERR(usb2->ref_clk)) { + dev_err(dev, "Clock not defined\n"); + return PTR_ERR(usb2->ref_clk); + } + + usb2->phy = devm_phy_create(dev, NULL, &ops); + if (IS_ERR(dev)) + return PTR_ERR(dev); + + phy_set_drvdata(usb2->phy, usb2); + platform_set_drvdata(pdev, usb2); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id bcm_ns_usb2_id_table[] = { + { .compatible = "brcm,ns-usb2-phy", }, + {}, +}; +MODULE_DEVICE_TABLE(of, bcm_ns_usb2_id_table); + +static struct platform_driver bcm_ns_usb2_driver = { + .probe = bcm_ns_usb2_probe, + .driver = { + .name = "bcm_ns_usb2", + .of_match_table = bcm_ns_usb2_id_table, + }, +}; +module_platform_driver(bcm_ns_usb2_driver); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-brcm-sata.c b/drivers/phy/phy-brcm-sata.c new file mode 100644 index 000000000000..6c4c5cb791ca --- /dev/null +++ b/drivers/phy/phy-brcm-sata.c @@ -0,0 +1,412 @@ +/* + * Broadcom SATA3 AHCI Controller PHY Driver + * + * Copyright (C) 2016 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +#define SATA_PCB_BANK_OFFSET 0x23c +#define SATA_PCB_REG_OFFSET(ofs) ((ofs) * 4) + +#define MAX_PORTS 2 + +/* Register offset between PHYs in PCB space */ +#define SATA_PCB_REG_28NM_SPACE_SIZE 0x1000 + +/* The older SATA PHY registers duplicated per port registers within the map, + * rather than having a separate map per port. + */ +#define SATA_PCB_REG_40NM_SPACE_SIZE 0x10 + +/* Register offset between PHYs in PHY control space */ +#define SATA_PHY_CTRL_REG_28NM_SPACE_SIZE 0x8 + +enum brcm_sata_phy_version { + BRCM_SATA_PHY_STB_28NM, + BRCM_SATA_PHY_STB_40NM, + BRCM_SATA_PHY_IPROC_NS2, +}; + +struct brcm_sata_port { + int portnum; + struct phy *phy; + struct brcm_sata_phy *phy_priv; + bool ssc_en; +}; + +struct brcm_sata_phy { + struct device *dev; + void __iomem *phy_base; + void __iomem *ctrl_base; + enum brcm_sata_phy_version version; + + struct brcm_sata_port phys[MAX_PORTS]; +}; + +enum sata_phy_regs { + BLOCK0_REG_BANK = 0x000, + BLOCK0_XGXSSTATUS = 0x81, + BLOCK0_XGXSSTATUS_PLL_LOCK = BIT(12), + BLOCK0_SPARE = 0x8d, + BLOCK0_SPARE_OOB_CLK_SEL_MASK = 0x3, + BLOCK0_SPARE_OOB_CLK_SEL_REFBY2 = 0x1, + + PLL_REG_BANK_0 = 0x050, + PLL_REG_BANK_0_PLLCONTROL_0 = 0x81, + + PLL1_REG_BANK = 0x060, + PLL1_ACTRL2 = 0x82, + PLL1_ACTRL3 = 0x83, + PLL1_ACTRL4 = 0x84, + + OOB_REG_BANK = 0x150, + OOB_CTRL1 = 0x80, + OOB_CTRL1_BURST_MAX_MASK = 0xf, + OOB_CTRL1_BURST_MAX_SHIFT = 12, + OOB_CTRL1_BURST_MIN_MASK = 0xf, + OOB_CTRL1_BURST_MIN_SHIFT = 8, + OOB_CTRL1_WAKE_IDLE_MAX_MASK = 0xf, + OOB_CTRL1_WAKE_IDLE_MAX_SHIFT = 4, + OOB_CTRL1_WAKE_IDLE_MIN_MASK = 0xf, + OOB_CTRL1_WAKE_IDLE_MIN_SHIFT = 0, + OOB_CTRL2 = 0x81, + OOB_CTRL2_SEL_ENA_SHIFT = 15, + OOB_CTRL2_SEL_ENA_RC_SHIFT = 14, + OOB_CTRL2_RESET_IDLE_MAX_MASK = 0x3f, + OOB_CTRL2_RESET_IDLE_MAX_SHIFT = 8, + OOB_CTRL2_BURST_CNT_MASK = 0x3, + OOB_CTRL2_BURST_CNT_SHIFT = 6, + OOB_CTRL2_RESET_IDLE_MIN_MASK = 0x3f, + OOB_CTRL2_RESET_IDLE_MIN_SHIFT = 0, + + TXPMD_REG_BANK = 0x1a0, + TXPMD_CONTROL1 = 0x81, + TXPMD_CONTROL1_TX_SSC_EN_FRC = BIT(0), + TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL = BIT(1), + TXPMD_TX_FREQ_CTRL_CONTROL1 = 0x82, + TXPMD_TX_FREQ_CTRL_CONTROL2 = 0x83, + TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK = 0x3ff, + TXPMD_TX_FREQ_CTRL_CONTROL3 = 0x84, + TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff, +}; + +enum sata_phy_ctrl_regs { + PHY_CTRL_1 = 0x0, + PHY_CTRL_1_RESET = BIT(0), +}; + +static inline void __iomem *brcm_sata_pcb_base(struct brcm_sata_port *port) +{ + struct brcm_sata_phy *priv = port->phy_priv; + u32 size = 0; + + switch (priv->version) { + case BRCM_SATA_PHY_STB_28NM: + case BRCM_SATA_PHY_IPROC_NS2: + size = SATA_PCB_REG_28NM_SPACE_SIZE; + break; + case BRCM_SATA_PHY_STB_40NM: + size = SATA_PCB_REG_40NM_SPACE_SIZE; + break; + default: + dev_err(priv->dev, "invalid phy version\n"); + break; + }; + + return priv->phy_base + (port->portnum * size); +} + +static inline void __iomem *brcm_sata_ctrl_base(struct brcm_sata_port *port) +{ + struct brcm_sata_phy *priv = port->phy_priv; + u32 size = 0; + + switch (priv->version) { + case BRCM_SATA_PHY_IPROC_NS2: + size = SATA_PHY_CTRL_REG_28NM_SPACE_SIZE; + break; + default: + dev_err(priv->dev, "invalid phy version\n"); + break; + }; + + return priv->ctrl_base + (port->portnum * size); +} + +static void brcm_sata_phy_wr(void __iomem *pcb_base, u32 bank, + u32 ofs, u32 msk, u32 value) +{ + u32 tmp; + + writel(bank, pcb_base + SATA_PCB_BANK_OFFSET); + tmp = readl(pcb_base + SATA_PCB_REG_OFFSET(ofs)); + tmp = (tmp & msk) | value; + writel(tmp, pcb_base + SATA_PCB_REG_OFFSET(ofs)); +} + +static u32 brcm_sata_phy_rd(void __iomem *pcb_base, u32 bank, u32 ofs) +{ + writel(bank, pcb_base + SATA_PCB_BANK_OFFSET); + return readl(pcb_base + SATA_PCB_REG_OFFSET(ofs)); +} + +/* These defaults were characterized by H/W group */ +#define STB_FMIN_VAL_DEFAULT 0x3df +#define STB_FMAX_VAL_DEFAULT 0x3df +#define STB_FMAX_VAL_SSC 0x83 + +static int brcm_stb_sata_init(struct brcm_sata_port *port) +{ + void __iomem *base = brcm_sata_pcb_base(port); + struct brcm_sata_phy *priv = port->phy_priv; + u32 tmp; + + /* override the TX spread spectrum setting */ + tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC; + brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp); + + /* set fixed min freq */ + brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2, + ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK, + STB_FMIN_VAL_DEFAULT); + + /* set fixed max freq depending on SSC config */ + if (port->ssc_en) { + dev_info(priv->dev, "enabling SSC on port%d\n", port->portnum); + tmp = STB_FMAX_VAL_SSC; + } else { + tmp = STB_FMAX_VAL_DEFAULT; + } + + brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3, + ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp); + + return 0; +} + +/* NS2 SATA PLL1 defaults were characterized by H/W group */ +#define NS2_PLL1_ACTRL2_MAGIC 0x1df8 +#define NS2_PLL1_ACTRL3_MAGIC 0x2b00 +#define NS2_PLL1_ACTRL4_MAGIC 0x8824 + +static int brcm_ns2_sata_init(struct brcm_sata_port *port) +{ + int try; + unsigned int val; + void __iomem *base = brcm_sata_pcb_base(port); + void __iomem *ctrl_base = brcm_sata_ctrl_base(port); + struct device *dev = port->phy_priv->dev; + + /* Configure OOB control */ + val = 0x0; + val |= (0xc << OOB_CTRL1_BURST_MAX_SHIFT); + val |= (0x4 << OOB_CTRL1_BURST_MIN_SHIFT); + val |= (0x9 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT); + val |= (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT); + brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL1, 0x0, val); + val = 0x0; + val |= (0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT); + val |= (0x2 << OOB_CTRL2_BURST_CNT_SHIFT); + val |= (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT); + brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL2, 0x0, val); + + /* Configure PHY PLL register bank 1 */ + val = NS2_PLL1_ACTRL2_MAGIC; + brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val); + val = NS2_PLL1_ACTRL3_MAGIC; + brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val); + val = NS2_PLL1_ACTRL4_MAGIC; + brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val); + + /* Configure PHY BLOCK0 register bank */ + /* Set oob_clk_sel to refclk/2 */ + brcm_sata_phy_wr(base, BLOCK0_REG_BANK, BLOCK0_SPARE, + ~BLOCK0_SPARE_OOB_CLK_SEL_MASK, + BLOCK0_SPARE_OOB_CLK_SEL_REFBY2); + + /* Strobe PHY reset using PHY control register */ + writel(PHY_CTRL_1_RESET, ctrl_base + PHY_CTRL_1); + mdelay(1); + writel(0x0, ctrl_base + PHY_CTRL_1); + mdelay(1); + + /* Wait for PHY PLL lock by polling pll_lock bit */ + try = 50; + while (try) { + val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK, + BLOCK0_XGXSSTATUS); + if (val & BLOCK0_XGXSSTATUS_PLL_LOCK) + break; + msleep(20); + try--; + } + if (!try) { + /* PLL did not lock; give up */ + dev_err(dev, "port%d PLL did not lock\n", port->portnum); + return -ETIMEDOUT; + } + + dev_dbg(dev, "port%d initialized\n", port->portnum); + + return 0; +} + +static int brcm_sata_phy_init(struct phy *phy) +{ + int rc; + struct brcm_sata_port *port = phy_get_drvdata(phy); + + switch (port->phy_priv->version) { + case BRCM_SATA_PHY_STB_28NM: + case BRCM_SATA_PHY_STB_40NM: + rc = brcm_stb_sata_init(port); + break; + case BRCM_SATA_PHY_IPROC_NS2: + rc = brcm_ns2_sata_init(port); + break; + default: + rc = -ENODEV; + }; + + return 0; +} + +static const struct phy_ops phy_ops = { + .init = brcm_sata_phy_init, + .owner = THIS_MODULE, +}; + +static const struct of_device_id brcm_sata_phy_of_match[] = { + { .compatible = "brcm,bcm7445-sata-phy", + .data = (void *)BRCM_SATA_PHY_STB_28NM }, + { .compatible = "brcm,bcm7425-sata-phy", + .data = (void *)BRCM_SATA_PHY_STB_40NM }, + { .compatible = "brcm,iproc-ns2-sata-phy", + .data = (void *)BRCM_SATA_PHY_IPROC_NS2 }, + {}, +}; +MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match); + +static int brcm_sata_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *dn = dev->of_node, *child; + const struct of_device_id *of_id; + struct brcm_sata_phy *priv; + struct resource *res; + struct phy_provider *provider; + int ret, count = 0; + + if (of_get_child_count(dn) == 0) + return -ENODEV; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + dev_set_drvdata(dev, priv); + priv->dev = dev; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy"); + priv->phy_base = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->phy_base)) + return PTR_ERR(priv->phy_base); + + of_id = of_match_node(brcm_sata_phy_of_match, dn); + if (of_id) + priv->version = (enum brcm_sata_phy_version)of_id->data; + else + priv->version = BRCM_SATA_PHY_STB_28NM; + + if (priv->version == BRCM_SATA_PHY_IPROC_NS2) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "phy-ctrl"); + priv->ctrl_base = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->ctrl_base)) + return PTR_ERR(priv->ctrl_base); + } + + for_each_available_child_of_node(dn, child) { + unsigned int id; + struct brcm_sata_port *port; + + if (of_property_read_u32(child, "reg", &id)) { + dev_err(dev, "missing reg property in node %s\n", + child->name); + ret = -EINVAL; + goto put_child; + } + + if (id >= MAX_PORTS) { + dev_err(dev, "invalid reg: %u\n", id); + ret = -EINVAL; + goto put_child; + } + if (priv->phys[id].phy) { + dev_err(dev, "already registered port %u\n", id); + ret = -EINVAL; + goto put_child; + } + + port = &priv->phys[id]; + port->portnum = id; + port->phy_priv = priv; + port->phy = devm_phy_create(dev, child, &phy_ops); + port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc"); + if (IS_ERR(port->phy)) { + dev_err(dev, "failed to create PHY\n"); + ret = PTR_ERR(port->phy); + goto put_child; + } + + phy_set_drvdata(port->phy, port); + count++; + } + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(provider)) { + dev_err(dev, "could not register PHY provider\n"); + return PTR_ERR(provider); + } + + dev_info(dev, "registered %d port(s)\n", count); + + return 0; +put_child: + of_node_put(child); + return ret; +} + +static struct platform_driver brcm_sata_phy_driver = { + .probe = brcm_sata_phy_probe, + .driver = { + .of_match_table = brcm_sata_phy_of_match, + .name = "brcm-sata-phy", + } +}; +module_platform_driver(brcm_sata_phy_driver); + +MODULE_DESCRIPTION("Broadcom SATA PHY driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Marc Carino"); +MODULE_AUTHOR("Brian Norris"); +MODULE_ALIAS("platform:phy-brcm-sata"); diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c deleted file mode 100644 index a23172ff40e3..000000000000 --- a/drivers/phy/phy-brcmstb-sata.c +++ /dev/null @@ -1,250 +0,0 @@ -/* - * Broadcom SATA3 AHCI Controller PHY Driver - * - * Copyright © 2009-2015 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/device.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/phy/phy.h> -#include <linux/platform_device.h> - -#define SATA_MDIO_BANK_OFFSET 0x23c -#define SATA_MDIO_REG_OFFSET(ofs) ((ofs) * 4) - -#define MAX_PORTS 2 - -/* Register offset between PHYs in PCB space */ -#define SATA_MDIO_REG_28NM_SPACE_SIZE 0x1000 - -/* The older SATA PHY registers duplicated per port registers within the map, - * rather than having a separate map per port. - */ -#define SATA_MDIO_REG_40NM_SPACE_SIZE 0x10 - -enum brcm_sata_phy_version { - BRCM_SATA_PHY_28NM, - BRCM_SATA_PHY_40NM, -}; - -struct brcm_sata_port { - int portnum; - struct phy *phy; - struct brcm_sata_phy *phy_priv; - bool ssc_en; -}; - -struct brcm_sata_phy { - struct device *dev; - void __iomem *phy_base; - enum brcm_sata_phy_version version; - - struct brcm_sata_port phys[MAX_PORTS]; -}; - -enum sata_mdio_phy_regs { - PLL_REG_BANK_0 = 0x50, - PLL_REG_BANK_0_PLLCONTROL_0 = 0x81, - - TXPMD_REG_BANK = 0x1a0, - TXPMD_CONTROL1 = 0x81, - TXPMD_CONTROL1_TX_SSC_EN_FRC = BIT(0), - TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL = BIT(1), - TXPMD_TX_FREQ_CTRL_CONTROL1 = 0x82, - TXPMD_TX_FREQ_CTRL_CONTROL2 = 0x83, - TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK = 0x3ff, - TXPMD_TX_FREQ_CTRL_CONTROL3 = 0x84, - TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff, -}; - -static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port) -{ - struct brcm_sata_phy *priv = port->phy_priv; - u32 offset = 0; - - if (priv->version == BRCM_SATA_PHY_28NM) - offset = SATA_MDIO_REG_28NM_SPACE_SIZE; - else if (priv->version == BRCM_SATA_PHY_40NM) - offset = SATA_MDIO_REG_40NM_SPACE_SIZE; - else - dev_err(priv->dev, "invalid phy version\n"); - - return priv->phy_base + (port->portnum * offset); -} - -static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs, - u32 msk, u32 value) -{ - u32 tmp; - - writel(bank, addr + SATA_MDIO_BANK_OFFSET); - tmp = readl(addr + SATA_MDIO_REG_OFFSET(ofs)); - tmp = (tmp & msk) | value; - writel(tmp, addr + SATA_MDIO_REG_OFFSET(ofs)); -} - -/* These defaults were characterized by H/W group */ -#define FMIN_VAL_DEFAULT 0x3df -#define FMAX_VAL_DEFAULT 0x3df -#define FMAX_VAL_SSC 0x83 - -static void brcm_sata_cfg_ssc(struct brcm_sata_port *port) -{ - void __iomem *base = brcm_sata_phy_base(port); - struct brcm_sata_phy *priv = port->phy_priv; - u32 tmp; - - /* override the TX spread spectrum setting */ - tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC; - brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp); - - /* set fixed min freq */ - brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2, - ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK, - FMIN_VAL_DEFAULT); - - /* set fixed max freq depending on SSC config */ - if (port->ssc_en) { - dev_info(priv->dev, "enabling SSC on port %d\n", port->portnum); - tmp = FMAX_VAL_SSC; - } else { - tmp = FMAX_VAL_DEFAULT; - } - - brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3, - ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp); -} - -static int brcm_sata_phy_init(struct phy *phy) -{ - struct brcm_sata_port *port = phy_get_drvdata(phy); - - brcm_sata_cfg_ssc(port); - - return 0; -} - -static const struct phy_ops phy_ops = { - .init = brcm_sata_phy_init, - .owner = THIS_MODULE, -}; - -static const struct of_device_id brcm_sata_phy_of_match[] = { - { .compatible = "brcm,bcm7445-sata-phy", - .data = (void *)BRCM_SATA_PHY_28NM }, - { .compatible = "brcm,bcm7425-sata-phy", - .data = (void *)BRCM_SATA_PHY_40NM }, - {}, -}; -MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match); - -static int brcm_sata_phy_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct device_node *dn = dev->of_node, *child; - const struct of_device_id *of_id; - struct brcm_sata_phy *priv; - struct resource *res; - struct phy_provider *provider; - int ret, count = 0; - - if (of_get_child_count(dn) == 0) - return -ENODEV; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - dev_set_drvdata(dev, priv); - priv->dev = dev; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy"); - priv->phy_base = devm_ioremap_resource(dev, res); - if (IS_ERR(priv->phy_base)) - return PTR_ERR(priv->phy_base); - - of_id = of_match_node(brcm_sata_phy_of_match, dn); - if (of_id) - priv->version = (enum brcm_sata_phy_version)of_id->data; - else - priv->version = BRCM_SATA_PHY_28NM; - - for_each_available_child_of_node(dn, child) { - unsigned int id; - struct brcm_sata_port *port; - - if (of_property_read_u32(child, "reg", &id)) { - dev_err(dev, "missing reg property in node %s\n", - child->name); - ret = -EINVAL; - goto put_child; - } - - if (id >= MAX_PORTS) { - dev_err(dev, "invalid reg: %u\n", id); - ret = -EINVAL; - goto put_child; - } - if (priv->phys[id].phy) { - dev_err(dev, "already registered port %u\n", id); - ret = -EINVAL; - goto put_child; - } - - port = &priv->phys[id]; - port->portnum = id; - port->phy_priv = priv; - port->phy = devm_phy_create(dev, child, &phy_ops); - port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc"); - if (IS_ERR(port->phy)) { - dev_err(dev, "failed to create PHY\n"); - ret = PTR_ERR(port->phy); - goto put_child; - } - - phy_set_drvdata(port->phy, port); - count++; - } - - provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); - if (IS_ERR(provider)) { - dev_err(dev, "could not register PHY provider\n"); - return PTR_ERR(provider); - } - - dev_info(dev, "registered %d port(s)\n", count); - - return 0; -put_child: - of_node_put(child); - return ret; -} - -static struct platform_driver brcm_sata_phy_driver = { - .probe = brcm_sata_phy_probe, - .driver = { - .of_match_table = brcm_sata_phy_of_match, - .name = "brcmstb-sata-phy", - } -}; -module_platform_driver(brcm_sata_phy_driver); - -MODULE_DESCRIPTION("Broadcom STB SATA PHY driver"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Marc Carino"); -MODULE_AUTHOR("Brian Norris"); -MODULE_ALIAS("platform:phy-brcmstb-sata"); diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c index 2a54caba93b4..cc093ebfda94 100644 --- a/drivers/phy/phy-exynos-mipi-video.c +++ b/drivers/phy/phy-exynos-mipi-video.c @@ -1,7 +1,7 @@ /* * Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver * - * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Copyright (C) 2013,2016 Samsung Electronics Co., Ltd. * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> * * This program is free software; you can redistribute it and/or modify @@ -13,96 +13,276 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/mfd/syscon/exynos4-pmu.h> +#include <linux/mfd/syscon/exynos5-pmu.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_device.h> #include <linux/phy/phy.h> -#include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/spinlock.h> #include <linux/mfd/syscon.h> -/* MIPI_PHYn_CONTROL reg. offset (for base address from ioremap): n = 0..1 */ -#define EXYNOS_MIPI_PHY_CONTROL(n) ((n) * 4) - enum exynos_mipi_phy_id { + EXYNOS_MIPI_PHY_ID_NONE = -1, EXYNOS_MIPI_PHY_ID_CSIS0, EXYNOS_MIPI_PHY_ID_DSIM0, EXYNOS_MIPI_PHY_ID_CSIS1, EXYNOS_MIPI_PHY_ID_DSIM1, + EXYNOS_MIPI_PHY_ID_CSIS2, EXYNOS_MIPI_PHYS_NUM }; -#define is_mipi_dsim_phy_id(id) \ - ((id) == EXYNOS_MIPI_PHY_ID_DSIM0 || (id) == EXYNOS_MIPI_PHY_ID_DSIM1) +enum exynos_mipi_phy_regmap_id { + EXYNOS_MIPI_REGMAP_PMU, + EXYNOS_MIPI_REGMAP_DISP, + EXYNOS_MIPI_REGMAP_CAM0, + EXYNOS_MIPI_REGMAP_CAM1, + EXYNOS_MIPI_REGMAPS_NUM +}; + +struct mipi_phy_device_desc { + int num_phys; + int num_regmaps; + const char *regmap_names[EXYNOS_MIPI_REGMAPS_NUM]; + struct exynos_mipi_phy_desc { + enum exynos_mipi_phy_id coupled_phy_id; + u32 enable_val; + unsigned int enable_reg; + enum exynos_mipi_phy_regmap_id enable_map; + u32 resetn_val; + unsigned int resetn_reg; + enum exynos_mipi_phy_regmap_id resetn_map; + } phys[EXYNOS_MIPI_PHYS_NUM]; +}; + +static const struct mipi_phy_device_desc s5pv210_mipi_phy = { + .num_regmaps = 1, + .regmap_names = {"syscon"}, + .num_phys = 4, + .phys = { + { + /* EXYNOS_MIPI_PHY_ID_CSIS0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0, + .enable_val = EXYNOS4_MIPI_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_SRESETN, + .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(0), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_DSIM0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0, + .enable_val = EXYNOS4_MIPI_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_MRESETN, + .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(0), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_CSIS1 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1, + .enable_val = EXYNOS4_MIPI_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_SRESETN, + .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(1), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_DSIM1 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1, + .enable_val = EXYNOS4_MIPI_PHY_ENABLE, + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1), + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS4_MIPI_PHY_MRESETN, + .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(1), + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, + }, +}; + +static const struct mipi_phy_device_desc exynos5420_mipi_phy = { + .num_regmaps = 1, + .regmap_names = {"syscon"}, + .num_phys = 5, + .phys = { + { + /* EXYNOS_MIPI_PHY_ID_CSIS0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0, + .enable_val = EXYNOS5_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY0_CONTROL, + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS5_MIPI_PHY_S_RESETN, + .resetn_reg = EXYNOS5420_MIPI_PHY0_CONTROL, + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_DSIM0 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0, + .enable_val = EXYNOS5_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY0_CONTROL, + .enable_map = EXYNOS_MIPI_REGMAP_PMU, + .resetn_val = EXYNOS5_MIPI_PHY_M_RESETN, + .resetn_reg = EXYNOS5420_MIPI_PHY0_CONTROL, + .resetn_map = EXYNOS_MIPI_REGMAP_PMU, + }, { + /* EXYNOS_MIPI_PHY_ID_CSIS1 */ + .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1, + .enable_val = EXYNOS5_PHY_ENABLE, + .enable_reg = EXYNOS5420_MIPI_PHY1_CONTRO |