phy: Group vendor specific phy drivers

Adding vendor specific directories in phy to group
phy drivers under their respective vendor umbrella.

Also updated the MAINTAINERS file to reflect the correct
directory structure for phy drivers.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

14 files changed, 4331 insertions, 0 deletions

diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
new file mode 100644
index 000000000000..7bfa64baf837
--- /dev/null
+++ b/drivers/phy/qualcomm/Kconfig
@@ -0,0 +1,58 @@
+#
+# Phy drivers for Qualcomm platforms
+#
+config PHY_QCOM_APQ8064_SATA
+	tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
+	depends on ARCH_QCOM
+	depends on HAS_IOMEM
+	depends on OF
+	select GENERIC_PHY
+
+config PHY_QCOM_IPQ806X_SATA
+	tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
+	depends on ARCH_QCOM
+	depends on HAS_IOMEM
+	depends on OF
+	select GENERIC_PHY
+
+config PHY_QCOM_QMP
+	tristate "Qualcomm QMP PHY Driver"
+	depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
+	select GENERIC_PHY
+	help
+	  Enable this to support the QMP PHY transceiver that is used
+	  with controllers such as PCIe, UFS, and USB on Qualcomm chips.
+
+config PHY_QCOM_QUSB2
+	tristate "Qualcomm QUSB2 PHY Driver"
+	depends on OF && (ARCH_QCOM || COMPILE_TEST)
+	depends on NVMEM || !NVMEM
+	select GENERIC_PHY
+	help
+	  Enable this to support the HighSpeed QUSB2 PHY transceiver for USB
+	  controllers on Qualcomm chips. This driver supports the high-speed
+	  PHY which is usually paired with either the ChipIdea or Synopsys DWC3
+	  USB IPs on MSM SOCs.
+
+config PHY_QCOM_UFS
+	tristate "Qualcomm UFS PHY driver"
+	depends on OF && ARCH_QCOM
+	select GENERIC_PHY
+	help
+	  Support for UFS PHY on QCOM chipsets.
+
+config PHY_QCOM_USB_HS
+	tristate "Qualcomm USB HS PHY module"
+	depends on USB_ULPI_BUS
+	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
+	select GENERIC_PHY
+	help
+	  Support for the USB high-speed ULPI compliant phy on Qualcomm
+	  chipsets.
+
+config PHY_QCOM_USB_HSIC
+	tristate "Qualcomm USB HSIC ULPI PHY module"
+	depends on USB_ULPI_BUS
+	select GENERIC_PHY
+	help
+	  Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
new file mode 100644
index 000000000000..2e183d7695fd
--- /dev/null
+++ b/drivers/phy/qualcomm/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
+obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
+obj-$(CONFIG_PHY_QCOM_QMP)		+= phy-qcom-qmp.o
+obj-$(CONFIG_PHY_QCOM_QUSB2)		+= phy-qcom-qusb2.o
+obj-$(CONFIG_PHY_QCOM_UFS)		+= phy-qcom-ufs.o
+obj-$(CONFIG_PHY_QCOM_UFS)		+= phy-qcom-ufs-qmp-14nm.o
+obj-$(CONFIG_PHY_QCOM_UFS)		+= phy-qcom-ufs-qmp-20nm.o
+obj-$(CONFIG_PHY_QCOM_USB_HS) 		+= phy-qcom-usb-hs.o
+obj-$(CONFIG_PHY_QCOM_USB_HSIC) 	+= phy-qcom-usb-hsic.o
diff --git a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
new file mode 100644
index 000000000000..69ce2afac015
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
@@ -0,0 +1,287 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+
+/* PHY registers */
+#define UNIPHY_PLL_REFCLK_CFG		0x000
+#define UNIPHY_PLL_PWRGEN_CFG		0x014
+#define UNIPHY_PLL_GLB_CFG		0x020
+#define UNIPHY_PLL_SDM_CFG0		0x038
+#define UNIPHY_PLL_SDM_CFG1		0x03C
+#define UNIPHY_PLL_SDM_CFG2		0x040
+#define UNIPHY_PLL_SDM_CFG3		0x044
+#define UNIPHY_PLL_SDM_CFG4		0x048
+#define UNIPHY_PLL_SSC_CFG0		0x04C
+#define UNIPHY_PLL_SSC_CFG1		0x050
+#define UNIPHY_PLL_SSC_CFG2		0x054
+#define UNIPHY_PLL_SSC_CFG3		0x058
+#define UNIPHY_PLL_LKDET_CFG0		0x05C
+#define UNIPHY_PLL_LKDET_CFG1		0x060
+#define UNIPHY_PLL_LKDET_CFG2		0x064
+#define UNIPHY_PLL_CAL_CFG0		0x06C
+#define UNIPHY_PLL_CAL_CFG8		0x08C
+#define UNIPHY_PLL_CAL_CFG9		0x090
+#define UNIPHY_PLL_CAL_CFG10		0x094
+#define UNIPHY_PLL_CAL_CFG11		0x098
+#define UNIPHY_PLL_STATUS		0x0C0
+
+#define SATA_PHY_SER_CTRL		0x100
+#define SATA_PHY_TX_DRIV_CTRL0		0x104
+#define SATA_PHY_TX_DRIV_CTRL1		0x108
+#define SATA_PHY_TX_IMCAL0		0x11C
+#define SATA_PHY_TX_IMCAL2		0x124
+#define SATA_PHY_RX_IMCAL0		0x128
+#define SATA_PHY_EQUAL			0x13C
+#define SATA_PHY_OOB_TERM		0x144
+#define SATA_PHY_CDR_CTRL0		0x148
+#define SATA_PHY_CDR_CTRL1		0x14C
+#define SATA_PHY_CDR_CTRL2		0x150
+#define SATA_PHY_CDR_CTRL3		0x154
+#define SATA_PHY_PI_CTRL0		0x168
+#define SATA_PHY_POW_DWN_CTRL0		0x180
+#define SATA_PHY_POW_DWN_CTRL1		0x184
+#define SATA_PHY_TX_DATA_CTRL		0x188
+#define SATA_PHY_ALIGNP			0x1A4
+#define SATA_PHY_TX_IMCAL_STAT		0x1E4
+#define SATA_PHY_RX_IMCAL_STAT		0x1E8
+
+#define UNIPHY_PLL_LOCK		BIT(0)
+#define SATA_PHY_TX_CAL		BIT(0)
+#define SATA_PHY_RX_CAL		BIT(0)
+
+/* default timeout set to 1 sec */
+#define TIMEOUT_MS		10000
+#define DELAY_INTERVAL_US	100
+
+struct qcom_apq8064_sata_phy {
+	void __iomem *mmio;
+	struct clk *cfg_clk;
+	struct device *dev;
+};
+
+/* Helper function to do poll and timeout */
+static int read_poll_timeout(void __iomem *addr, u32 mask)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
+
+	do {
+		if (readl_relaxed(addr) & mask)
+			return 0;
+
+		 usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
+	} while (!time_after(jiffies, timeout));
+
+	return (readl_relaxed(addr) & mask) ? 0 : -ETIMEDOUT;
+}
+
+static int qcom_apq8064_sata_phy_init(struct phy *generic_phy)
+{
+	struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy);
+	void __iomem *base = phy->mmio;
+	int ret = 0;
+
+	/* SATA phy initialization */
+	writel_relaxed(0x01, base + SATA_PHY_SER_CTRL);
+	writel_relaxed(0xB1, base + SATA_PHY_POW_DWN_CTRL0);
+	/* Make sure the power down happens before power up */
+	mb();
+	usleep_range(10, 60);
+
+	writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0);
+	writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1);
+	writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0);
+	writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0);
+	writel_relaxed(0x02, base + SATA_PHY_TX_IMCAL2);
+
+	/* Write UNIPHYPLL registers to configure PLL */
+	writel_relaxed(0x04, base + UNIPHY_PLL_REFCLK_CFG);
+	writel_relaxed(0x00, base + UNIPHY_PLL_PWRGEN_CFG);
+
+	writel_relaxed(0x0A, base + UNIPHY_PLL_CAL_CFG0);
+	writel_relaxed(0xF3, base + UNIPHY_PLL_CAL_CFG8);
+	writel_relaxed(0x01, base + UNIPHY_PLL_CAL_CFG9);
+	writel_relaxed(0xED, base + UNIPHY_PLL_CAL_CFG10);
+	writel_relaxed(0x02, base + UNIPHY_PLL_CAL_CFG11);
+
+	writel_relaxed(0x36, base + UNIPHY_PLL_SDM_CFG0);
+	writel_relaxed(0x0D, base + UNIPHY_PLL_SDM_CFG1);
+	writel_relaxed(0xA3, base + UNIPHY_PLL_SDM_CFG2);
+	writel_relaxed(0xF0, base + UNIPHY_PLL_SDM_CFG3);
+	writel_relaxed(0x00, base + UNIPHY_PLL_SDM_CFG4);
+
+	writel_relaxed(0x19, base + UNIPHY_PLL_SSC_CFG0);
+	writel_relaxed(0xE1, base + UNIPHY_PLL_SSC_CFG1);
+	writel_relaxed(0x00, base + UNIPHY_PLL_SSC_CFG2);
+	writel_relaxed(0x11, base + UNIPHY_PLL_SSC_CFG3);
+
+	writel_relaxed(0x04, base + UNIPHY_PLL_LKDET_CFG0);
+	writel_relaxed(0xFF, base + UNIPHY_PLL_LKDET_CFG1);
+
+	writel_relaxed(0x02, base + UNIPHY_PLL_GLB_CFG);
+	/* make sure global config LDO power down happens before power up */
+	mb();
+
+	writel_relaxed(0x03, base + UNIPHY_PLL_GLB_CFG);
+	writel_relaxed(0x05, base + UNIPHY_PLL_LKDET_CFG2);
+
+	/* PLL Lock wait */
+	ret = read_poll_timeout(base + UNIPHY_PLL_STATUS, UNIPHY_PLL_LOCK);
+	if (ret) {
+		dev_err(phy->dev, "poll timeout UNIPHY_PLL_STATUS\n");
+		return ret;
+	}
+
+	/* TX Calibration */
+	ret = read_poll_timeout(base + SATA_PHY_TX_IMCAL_STAT, SATA_PHY_TX_CAL);
+	if (ret) {
+		dev_err(phy->dev, "poll timeout SATA_PHY_TX_IMCAL_STAT\n");
+		return ret;
+	}
+
+	/* RX Calibration */
+	ret = read_poll_timeout(base + SATA_PHY_RX_IMCAL_STAT, SATA_PHY_RX_CAL);
+	if (ret) {
+		dev_err(phy->dev, "poll timeout SATA_PHY_RX_IMCAL_STAT\n");
+		return ret;
+	}
+
+	/* SATA phy calibrated succesfully, power up to functional mode */
+	writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1);
+	writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0);
+	writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0);
+
+	writel_relaxed(0x00, base + SATA_PHY_POW_DWN_CTRL1);
+	writel_relaxed(0x59, base + SATA_PHY_CDR_CTRL0);
+	writel_relaxed(0x04, base + SATA_PHY_CDR_CTRL1);
+	writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL2);
+	writel_relaxed(0x00, base + SATA_PHY_PI_CTRL0);
+	writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL3);
+	writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0);
+
+	writel_relaxed(0x11, base + SATA_PHY_TX_DATA_CTRL);
+	writel_relaxed(0x43, base + SATA_PHY_ALIGNP);
+	writel_relaxed(0x04, base + SATA_PHY_OOB_TERM);
+
+	writel_relaxed(0x01, base + SATA_PHY_EQUAL);
+	writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL0);
+	writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL1);
+
+	return 0;
+}
+
+static int qcom_apq8064_sata_phy_exit(struct phy *generic_phy)
+{
+	struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy);
+	void __iomem *base = phy->mmio;
+
+	/* Power down PHY */
+	writel_relaxed(0xF8, base + SATA_PHY_POW_DWN_CTRL0);
+	writel_relaxed(0xFE, base + SATA_PHY_POW_DWN_CTRL1);
+
+	/* Power down PLL block */
+	writel_relaxed(0x00, base + UNIPHY_PLL_GLB_CFG);
+
+	return 0;
+}
+
+static const struct phy_ops qcom_apq8064_sata_phy_ops = {
+	.init		= qcom_apq8064_sata_phy_init,
+	.exit		= qcom_apq8064_sata_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+static int qcom_apq8064_sata_phy_probe(struct platform_device *pdev)
+{
+	struct qcom_apq8064_sata_phy *phy;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct phy_provider *phy_provider;
+	struct phy *generic_phy;
+	int ret;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	phy->mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(phy->mmio))
+		return PTR_ERR(phy->mmio);
+
+	generic_phy = devm_phy_create(dev, NULL, &qcom_apq8064_sata_phy_ops);
+	if (IS_ERR(generic_phy)) {
+		dev_err(dev, "%s: failed to create phy\n", __func__);
+		return PTR_ERR(generic_phy);
+	}
+
+	phy->dev = dev;
+	phy_set_drvdata(generic_phy, phy);
+	platform_set_drvdata(pdev, phy);
+
+	phy->cfg_clk = devm_clk_get(dev, "cfg");
+	if (IS_ERR(phy->cfg_clk)) {
+		dev_err(dev, "Failed to get sata cfg clock\n");
+		return PTR_ERR(phy->cfg_clk);
+	}
+
+	ret = clk_prepare_enable(phy->cfg_clk);
+	if (ret)
+		return ret;
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		clk_disable_unprepare(phy->cfg_clk);
+		dev_err(dev, "%s: failed to register phy\n", __func__);
+		return PTR_ERR(phy_provider);
+	}
+
+	return 0;
+}
+
+static int qcom_apq8064_sata_phy_remove(struct platform_device *pdev)
+{
+	struct qcom_apq8064_sata_phy *phy = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(phy->cfg_clk);
+
+	return 0;
+}
+
+static const struct of_device_id qcom_apq8064_sata_phy_of_match[] = {
+	{ .compatible = "qcom,apq8064-sata-phy" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, qcom_apq8064_sata_phy_of_match);
+
+static struct platform_driver qcom_apq8064_sata_phy_driver = {
+	.probe	= qcom_apq8064_sata_phy_probe,
+	.remove	= qcom_apq8064_sata_phy_remove,
+	.driver = {
+		.name	= "qcom-apq8064-sata-phy",
+		.of_match_table	= qcom_apq8064_sata_phy_of_match,
+	}
+};
+module_platform_driver(qcom_apq8064_sata_phy_driver);
+
+MODULE_DESCRIPTION("QCOM apq8064 SATA PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
new file mode 100644
index 000000000000..0ad127cc9298
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+
+struct qcom_ipq806x_sata_phy {
+	void __iomem *mmio;
+	struct clk *cfg_clk;
+	struct device *dev;
+};
+
+#define __set(v, a, b)	(((v) << (b)) & GENMASK(a, b))
+
+#define SATA_PHY_P0_PARAM0		0x200
+#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(x)	__set(x, 17, 12)
+#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK	GENMASK(17, 12)
+#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2(x)	__set(x, 11, 6)
+#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK	GENMASK(11, 6)
+#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1(x)	__set(x, 5, 0)
+#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK	GENMASK(5, 0)
+
+#define SATA_PHY_P0_PARAM1		0x204
+#define SATA_PHY_P0_PARAM1_RESERVED_BITS31_21(x)	__set(x, 31, 21)
+#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(x)	__set(x, 20, 14)
+#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK	GENMASK(20, 14)
+#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(x)	__set(x, 13, 7)
+#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK	GENMASK(13, 7)
+#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(x)	__set(x, 6, 0)
+#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK	GENMASK(6, 0)
+
+#define SATA_PHY_P0_PARAM2		0x208
+#define SATA_PHY_P0_PARAM2_RX_EQ(x)	__set(x, 20, 18)
+#define SATA_PHY_P0_PARAM2_RX_EQ_MASK	GENMASK(20, 18)
+
+#define SATA_PHY_P0_PARAM3		0x20C
+#define SATA_PHY_SSC_EN			0x8
+#define SATA_PHY_P0_PARAM4		0x210
+#define SATA_PHY_REF_SSP_EN		0x2
+#define SATA_PHY_RESET			0x1
+
+static int qcom_ipq806x_sata_phy_init(struct phy *generic_phy)
+{
+	struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy);
+	u32 reg;
+
+	/* Setting SSC_EN to 1 */
+	reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM3);
+	reg = reg | SATA_PHY_SSC_EN;
+	writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM3);
+
+	reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM0) &
+			~(SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK |
+			  SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK |
+			  SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK);
+	reg |= SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(0xf);
+	writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM0);
+
+	reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM1) &
+			~(SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK |
+			  SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK |
+			  SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK);
+	reg |= SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(0x55) |
+		SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(0x55) |
+		SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(0x55);
+	writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM1);
+
+	reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM2) &
+		~SATA_PHY_P0_PARAM2_RX_EQ_MASK;
+	reg |= SATA_PHY_P0_PARAM2_RX_EQ(0x3);
+	writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM2);
+
+	/* Setting PHY_RESET to 1 */
+	reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
+	reg = reg | SATA_PHY_RESET;
+	writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
+
+	/* Setting REF_SSP_EN to 1 */
+	reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
+	reg = reg | SATA_PHY_REF_SSP_EN | SATA_PHY_RESET;
+	writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
+
+	/* make sure all changes complete before we let the PHY out of reset */
+	mb();
+
+	/* sleep for max. 50us more to combine processor wakeups */
+	usleep_range(20, 20 + 50);
+
+	/* Clearing PHY_RESET to 0 */
+	reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
+	reg = reg & ~SATA_PHY_RESET;
+	writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
+
+	return 0;
+}
+
+static int qcom_ipq806x_sata_phy_exit(struct phy *generic_phy)
+{
+	struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy);
+	u32 reg;
+
+	/* Setting PHY_RESET to 1 */
+	reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
+	reg = reg | SATA_PHY_RESET;
+	writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
+
+	return 0;
+}
+
+static const struct phy_ops qcom_ipq806x_sata_phy_ops = {
+	.init		= qcom_ipq806x_sata_phy_init,
+	.exit		= qcom_ipq806x_sata_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev)
+{
+	struct qcom_ipq806x_sata_phy *phy;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct phy_provider *phy_provider;
+	struct phy *generic_phy;
+	int ret;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	phy->mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(phy->mmio))
+		return PTR_ERR(phy->mmio);
+
+	generic_phy = devm_phy_create(dev, NULL, &qcom_ipq806x_sata_phy_ops);
+	if (IS_ERR(generic_phy)) {
+		dev_err(dev, "%s: failed to create phy\n", __func__);
+		return PTR_ERR(generic_phy);
+	}
+
+	phy->dev = dev;
+	phy_set_drvdata(generic_phy, phy);
+	platform_set_drvdata(pdev, phy);
+
+	phy->cfg_clk = devm_clk_get(dev, "cfg");
+	if (IS_ERR(phy->cfg_clk)) {
+		dev_err(dev, "Failed to get sata cfg clock\n");
+		return PTR_ERR(phy->cfg_clk);
+	}
+
+	ret = clk_prepare_enable(phy->cfg_clk);
+	if (ret)
+		return ret;
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		clk_disable_unprepare(phy->cfg_clk);
+		dev_err(dev, "%s: failed to register phy\n", __func__);
+		return PTR_ERR(phy_provider);
+	}
+
+	return 0;
+}
+
+static int qcom_ipq806x_sata_phy_remove(struct platform_device *pdev)
+{
+	struct qcom_ipq806x_sata_phy *phy = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(phy->cfg_clk);
+
+	return 0;
+}
+
+static const struct of_device_id qcom_ipq806x_sata_phy_of_match[] = {
+	{ .compatible = "qcom,ipq806x-sata-phy" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, qcom_ipq806x_sata_phy_of_match);
+
+static struct platform_driver qcom_ipq806x_sata_phy_driver = {
+	.probe	= qcom_ipq806x_sata_phy_probe,
+	.remove	= qcom_ipq806x_sata_phy_remove,
+	.driver = {
+		.name	= "qcom-ipq806x-sata-phy",
+		.of_match_table	= qcom_ipq806x_sata_phy_of_match,
+	}
+};
+module_platform_driver(qcom_ipq806x_sata_phy_driver);
+
+MODULE_DESCRIPTION("QCOM IPQ806x SATA PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
new file mode 100644
index 000000000000..78ca62897784
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -0,0 +1,1153 @@
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/phy/phy.h>
+
+/* QMP PHY QSERDES COM registers */
+#define QSERDES_COM_BG_TIMER				0x00c
+#define QSERDES_COM_SSC_EN_CENTER			0x010
+#define QSERDES_COM_SSC_ADJ_PER1			0x014
+#define QSERDES_COM_SSC_ADJ_PER2			0x018
+#define QSERDES_COM_SSC_PER1				0x01c
+#define QSERDES_COM_SSC_PER2				0x020
+#define QSERDES_COM_SSC_STEP_SIZE1			0x024
+#define QSERDES_COM_SSC_STEP_SIZE2			0x028
+#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN			0x034
+#define QSERDES_COM_CLK_ENABLE1				0x038
+#define QSERDES_COM_SYS_CLK_CTRL			0x03c
+#define QSERDES_COM_SYSCLK_BUF_ENABLE			0x040
+#define QSERDES_COM_PLL_IVCO				0x048
+#define QSERDES_COM_LOCK_CMP1_MODE0			0x04c
+#define QSERDES_COM_LOCK_CMP2_MODE0			0x050
+#define QSERDES_COM_LOCK_CMP3_MODE0			0x054
+#define QSERDES_COM_LOCK_CMP1_MODE1			0x058
+#define QSERDES_COM_LOCK_CMP2_MODE1			0x05c
+#define QSERDES_COM_LOCK_CMP3_MODE1			0x060
+#define QSERDES_COM_BG_TRIM				0x070
+#define QSERDES_COM_CLK_EP_DIV				0x074
+#define QSERDES_COM_CP_CTRL_MODE0			0x078
+#define QSERDES_COM_CP_CTRL_MODE1			0x07c
+#define QSERDES_COM_PLL_RCTRL_MODE0			0x084
+#define QSERDES_COM_PLL_RCTRL_MODE1			0x088
+#define QSERDES_COM_PLL_CCTRL_MODE0			0x090
+#define QSERDES_COM_PLL_CCTRL_MODE1			0x094
+#define QSERDES_COM_SYSCLK_EN_SEL			0x0ac
+#define QSERDES_COM_RESETSM_CNTRL			0x0b4
+#define QSERDES_COM_RESTRIM_CTRL			0x0bc
+#define QSERDES_COM_RESCODE_DIV_NUM			0x0c4
+#define QSERDES_COM_LOCK_CMP_EN				0x0c8
+#define QSERDES_COM_LOCK_CMP_CFG			0x0cc
+#define QSERDES_COM_DEC_START_MODE0			0x0d0
+#define QSERDES_COM_DEC_START_MODE1			0x0d4
+#define QSERDES_COM_DIV_FRAC_START1_MODE0		0x0dc
+#define QSERDES_COM_DIV_FRAC_START2_MODE0		0x0e0
+#define QSERDES_COM_DIV_FRAC_START3_MODE0		0x0e4
+#define QSERDES_COM_DIV_FRAC_START1_MODE1		0x0e8
+#define QSERDES_COM_DIV_FRAC_START2_MODE1		0x0ec
+#define QSERDES_COM_DIV_FRAC_START3_MODE1		0x0f0
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0		0x108
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0		0x10c
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1		0x110
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1		0x114
+#define QSERDES_COM_VCO_TUNE_CTRL			0x124
+#define QSERDES_COM_VCO_TUNE_MAP			0x128
+#define QSERDES_COM_VCO_TUNE1_MODE0			0x12c
+#define QSERDES_COM_VCO_TUNE2_MODE0			0x130
+#define QSERDES_COM_VCO_TUNE1_MODE1			0x134
+#define QSERDES_COM_VCO_TUNE2_MODE1			0x138
+#define QSERDES_COM_VCO_TUNE_TIMER1			0x144
+#define QSERDES_COM_VCO_TUNE_TIMER2			0x148
+#define QSERDES_COM_BG_CTRL				0x170
+#define QSERDES_COM_CLK_SELECT				0x174
+#define QSERDES_COM_HSCLK_SEL				0x178
+#define QSERDES_COM_CORECLK_DIV				0x184
+#define QSERDES_COM_CORE_CLK_EN				0x18c
+#define QSERDES_COM_C_READY_STATUS			0x190
+#define QSERDES_COM_CMN_CONFIG				0x194
+#define QSERDES_COM_SVS_MODE_CLK_SEL			0x19c
+#define QSERDES_COM_DEBUG_BUS0				0x1a0
+#define QSERDES_COM_DEBUG_BUS1				0x1a4
+#define QSERDES_COM_DEBUG_BUS2				0x1a8
+#define QSERDES_COM_DEBUG_BUS3				0x1ac
+#define QSERDES_COM_DEBUG_BUS_SEL			0x1b0
+#define QSERDES_COM_CORECLK_DIV_MODE1			0x1bc
+
+/* QMP PHY TX registers */
+#define QSERDES_TX_RES_CODE_LANE_OFFSET			0x054
+#define QSERDES_TX_DEBUG_BUS_SEL			0x064
+#define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN	0x068
+#define QSERDES_TX_LANE_MODE				0x094
+#define QSERDES_TX_RCV_DETECT_LVL_2			0x0ac
+
+/* QMP PHY RX registers */
+#define QSERDES_RX_UCDR_SO_GAIN_HALF			0x010
+#define QSERDES_RX_UCDR_SO_GAIN				0x01c
+#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN		0x040
+#define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE	0x048
+#define QSERDES_RX_RX_TERM_BW				0x090
+#define QSERDES_RX_RX_EQ_GAIN1_LSB			0x0c4
+#define QSERDES_RX_RX_EQ_GAIN1_MSB			0x0c8
+#define QSERDES_RX_RX_EQ_GAIN2_LSB			0x0cc
+#define QSERDES_RX_RX_EQ_GAIN2_MSB			0x0d0
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2		0x0d8
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3		0x0dc
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4		0x0e0
+#define QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1		0x108
+#define QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2		0x10c
+#define QSERDES_RX_SIGDET_ENABLES			0x110
+#define QSERDES_RX_SIGDET_CNTRL				0x114
+#define QSERDES_RX_SIGDET_LVL				0x118
+#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL		0x11c
+#define QSERDES_RX_RX_BAND				0x120
+#define QSERDES_RX_RX_INTERFACE_MODE			0x12c
+
+/* QMP PHY PCS registers */
+#define QPHY_POWER_DOWN_CONTROL				0x04
+#define QPHY_TXDEEMPH_M6DB_V0				0x24
+#define QPHY_TXDEEMPH_M3P5DB_V0				0x28
+#define QPHY_ENDPOINT_REFCLK_DRIVE			0x54
+#define QPHY_RX_IDLE_DTCT_CNTRL				0x58
+#define QPHY_POWER_STATE_CONFIG1			0x60
+#define QPHY_POWER_STATE_CONFIG2			0x64
+#define QPHY_POWER_STATE_CONFIG4			0x6c
+#define QPHY_LOCK_DETECT_CONFIG1			0x80
+#define QPHY_LOCK_DETECT_CONFIG2			0x84
+#define QPHY_LOCK_DETECT_CONFIG3			0x88
+#define QPHY_PWRUP_RESET_DLY_TIME_AUXCLK		0xa0
+#define QPHY_LP_WAKEUP_DLY_TIME_AUXCLK			0xa4
+
+/* QPHY_SW_RESET bit */
+#define SW_RESET				BIT(0)
+/* QPHY_POWER_DOWN_CONTROL */
+#define SW_PWRDN				BIT(0)
+#define REFCLK_DRV_DSBL				BIT(1)
+/* QPHY_START_CONTROL bits */
+#define SERDES_START				BIT(0)
+#define PCS_START				BIT(1)
+#define PLL_READY_GATE_EN			BIT(3)
+/* QPHY_PCS_STATUS bit */
+#define PHYSTATUS				BIT(6)
+/* QPHY_COM_PCS_READY_STATUS bit */
+#define PCS_READY				BIT(0)
+
+#define PHY_INIT_COMPLETE_TIMEOUT		1000
+#define POWER_DOWN_DELAY_US_MIN			10
+#define POWER_DOWN_DELAY_US_MAX			11
+
+#define MAX_PROP_NAME				32
+
+struct qmp_phy_init_tbl {
+	unsigned int offset;
+	unsigned int val;
+	/*
+	 * register part of layout ?
+	 * if yes, then offset gives index in the reg-layout
+	 */
+	int in_layout;
+};
+
+#define QMP_PHY_INIT_CFG(o, v)		\
+	{				\
+		.offset = o,		\
+		.val = v,		\
+	}
+
+#define QMP_PHY_INIT_CFG_L(o, v)	\
+	{				\
+		.offset = o,		\
+		.val = v,		\
+		.in_layout = 1,		\
+	}
+
+/* set of registers with offsets different per-PHY */
+enum qphy_reg_layout {
+	/* Common block control registers */
+	QPHY_COM_SW_RESET,
+	QPHY_COM_POWER_DOWN_CONTROL,
+	QPHY_COM_START_CONTROL,
+	QPHY_COM_PCS_READY_STATUS,
+	/* PCS registers */
+	QPHY_PLL_LOCK_CHK_DLY_TIME,
+	QPHY_FLL_CNTRL1,
+	QPHY_FLL_CNTRL2,
+	QPHY_FLL_CNT_VAL_L,
+	QPHY_FLL_CNT_VAL_H_TOL,
+	QPHY_FLL_MAN_CODE,
+	QPHY_SW_RESET,
+	QPHY_START_CTRL,
+	QPHY_PCS_READY_STATUS,
+};
+
+static const unsigned int pciephy_regs_layout[] = {
+	[QPHY_COM_SW_RESET]		= 0x400,
+	[QPHY_COM_POWER_DOWN_CONTROL]	= 0x404,
+	[QPHY_COM_START_CONTROL]	= 0x408,
+	[QPHY_COM_PCS_READY_STATUS]	= 0x448,
+	[QPHY_PLL_LOCK_CHK_DLY_TIME]	= 0xa8,
+	[QPHY_FLL_CNTRL1]		= 0xc4,
+	[QPHY_FLL_CNTRL2]		= 0xc8,
+	[QPHY_FLL_CNT_VAL_L]		= 0xcc,
+	[QPHY_FLL_CNT_VAL_H_TOL]	= 0xd0,
+	[QPHY_FLL_MAN_CODE]		= 0xd4,
+	[QPHY_SW_RESET]			= 0x00,
+	[QPHY_START_CTRL]		= 0x08,
+	[QPHY_PCS_READY_STATUS]		= 0x174,
+};
+
+static const unsigned int usb3phy_regs_layout[] = {
+	[QPHY_FLL_CNTRL1]		= 0xc0,
+	[QPHY_FLL_CNTRL2]		= 0xc4,
+	[QPHY_FLL_CNT_VAL_L]		= 0xc8,
+	[QPHY_FLL_CNT_VAL_H_TOL]	= 0xcc,
+	[QPHY_FLL_MAN_CODE]		= 0xd0,
+	[QPHY_SW_RESET]			= 0x00,
+	[QPHY_START_CTRL]		= 0x08,
+	[QPHY_PCS_READY_STATUS]		= 0x17c,
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x42),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
+	QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x15),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x40),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+	QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_BAND, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x19),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_RX_IDLE_DTCT_CNTRL, 0x4c),
+	QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+
+	QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x05),
+
+	QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x05),
+	QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG4, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG1, 0xa3),
+	QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0x0e),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0