Merge branch 'upstream' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

20 files changed, 1735 insertions, 233 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 7d8bcb38797a..ae9e7a579b94 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -397,7 +397,7 @@ config SUN3LANCE
 	  If you're not building a kernel for a Sun 3, say N.
 
 config SUN3_82586
-	tristate "Sun3 on-board Intel 82586 support"
+	bool "Sun3 on-board Intel 82586 support"
 	depends on NET_ETHERNET && SUN3
 	help
 	  This driver enables support for the on-board Intel 82586 based
@@ -1924,12 +1924,15 @@ config R8169_VLAN
 	  If in doubt, say Y.
 
 config SIS190
-	tristate "SiS190 gigabit ethernet support"
+	tristate "SiS190/SiS191 gigabit ethernet support"
 	depends on PCI
 	select CRC32
 	select MII
 	---help---
-	  Say Y here if you have a SiS 190 PCI Gigabit Ethernet adapter.
+	  Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
+	  a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
+	  appear in lan on motherboard designs which are based on SiS 965
+	  and SiS 966 south bridge.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called sis190.  This is recommended.
diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h
index f09348802b46..bf3e7b6a7a18 100644
--- a/drivers/net/chelsio/common.h
+++ b/drivers/net/chelsio/common.h
@@ -88,7 +88,7 @@ struct t1_rx_mode {
 
 static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm)
 {
-	u8 *addr = 0;
+	u8 *addr = NULL;
 
 	if (rm->idx++ < rm->dev->mc_count) {
 		addr = rm->list->dmi_addr;
@@ -190,7 +190,7 @@ struct sge;
 struct peespi;
 
 struct adapter {
-	u8 *regs;
+	u8 __iomem *regs;
 	struct pci_dev *pdev;
 	unsigned long registered_device_map;
 	unsigned long open_device_map;
diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c
index 28ae478b386d..349ebe783ed6 100644
--- a/drivers/net/chelsio/cxgb2.c
+++ b/drivers/net/chelsio/cxgb2.c
@@ -824,7 +824,7 @@ static void cxgb_proc_cleanup(struct adapter *adapter,
 static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
 {
         struct adapter *adapter = dev->priv;
-        struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data;
+        struct mii_ioctl_data *data = if_mii(req);
 
 	switch (cmd) {
         case SIOCGMIIPHY:
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 93e9f8788751..51c2b3a18b6f 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -1270,7 +1270,7 @@ struct e1000_hw_stats {
 
 /* Structure containing variables used by the shared code (e1000_hw.c) */
 struct e1000_hw {
-    uint8_t *hw_addr;
+    uint8_t __iomem *hw_addr;
     uint8_t *flash_address;
     e1000_mac_type mac_type;
     e1000_phy_type phy_type;
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index fb6b232069d6..7c9dbc8c9423 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -58,11 +58,10 @@
 
 #define INT_CAUSE_UNMASK_ALL		0x0007ffff
 #define INT_CAUSE_UNMASK_ALL_EXT	0x0011ffff
-#ifdef MV643XX_RX_QUEUE_FILL_ON_TASK
 #define INT_CAUSE_MASK_ALL		0x00000000
+#define INT_CAUSE_MASK_ALL_EXT		0x00000000
 #define INT_CAUSE_CHECK_BITS		INT_CAUSE_UNMASK_ALL
 #define INT_CAUSE_CHECK_BITS_EXT	INT_CAUSE_UNMASK_ALL_EXT
-#endif
 
 #ifdef MV643XX_CHECKSUM_OFFLOAD_TX
 #define MAX_DESCS_PER_SKB	(MAX_SKB_FRAGS + 1)
@@ -259,14 +258,13 @@ static void mv643xx_eth_update_mac_address(struct net_device *dev)
 static void mv643xx_eth_set_rx_mode(struct net_device *dev)
 {
 	struct mv643xx_private *mp = netdev_priv(dev);
-	u32 config_reg;
 
-	config_reg = ethernet_get_config_reg(mp->port_num);
 	if (dev->flags & IFF_PROMISC)
-		config_reg |= (u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE;
+		mp->port_config |= (u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE;
 	else
-		config_reg &= ~(u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE;
-	ethernet_set_config_reg(mp->port_num, config_reg);
+		mp->port_config &= ~(u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE;
+
+	mv_write(MV643XX_ETH_PORT_CONFIG_REG(mp->port_num), mp->port_config);
 }
 
 /*
@@ -369,15 +367,6 @@ static int mv643xx_eth_free_tx_queue(struct net_device *dev,
 
 			dev_kfree_skb_irq(pkt_info.return_info);
 			released = 0;
-
-			/*
-			 * Decrement the number of outstanding skbs counter on
-			 * the TX queue.
-			 */
-			if (mp->tx_ring_skbs == 0)
-				panic("ERROR - TX outstanding SKBs"
-						" counter is corrupted");
-			mp->tx_ring_skbs--;
 		} else
 			dma_unmap_page(NULL, pkt_info.buf_ptr,
 					pkt_info.byte_cnt, DMA_TO_DEVICE);
@@ -412,15 +401,13 @@ static int mv643xx_eth_receive_queue(struct net_device *dev)
 	struct pkt_info pkt_info;
 
 #ifdef MV643XX_NAPI
-	while (eth_port_receive(mp, &pkt_info) == ETH_OK && budget > 0) {
+	while (budget-- > 0 && eth_port_receive(mp, &pkt_info) == ETH_OK) {
 #else
 	while (eth_port_receive(mp, &pkt_info) == ETH_OK) {
 #endif
 		mp->rx_ring_skbs--;
 		received_packets++;
-#ifdef MV643XX_NAPI
-		budget--;
-#endif
+
 		/* Update statistics. Note byte count includes 4 byte CRC count */
 		stats->rx_packets++;
 		stats->rx_bytes += pkt_info.byte_cnt;
@@ -1044,9 +1031,6 @@ static void mv643xx_tx(struct net_device *dev)
 						DMA_TO_DEVICE);
 
 			dev_kfree_skb_irq(pkt_info.return_info);
-
-			if (mp->tx_ring_skbs)
-				mp->tx_ring_skbs--;
 		} else
 			dma_unmap_page(NULL, pkt_info.buf_ptr,
 					pkt_info.byte_cnt, DMA_TO_DEVICE);
@@ -1189,7 +1173,6 @@ linear:
 		pkt_info.buf_ptr = dma_map_single(NULL, skb->data, skb->len,
 							DMA_TO_DEVICE);
 		pkt_info.return_info = skb;
-		mp->tx_ring_skbs++;
 		status = eth_port_send(mp, &pkt_info);
 		if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL))
 			printk(KERN_ERR "%s: Error on transmitting packet\n",
@@ -1274,7 +1257,6 @@ linear:
 				pkt_info.cmd_sts |= ETH_TX_ENABLE_INTERRUPT |
 							ETH_TX_LAST_DESC;
 				pkt_info.return_info = skb;
-				mp->tx_ring_skbs++;
 			} else {
 				pkt_info.return_info = 0;
 			}
@@ -1311,7 +1293,6 @@ linear:
 	pkt_info.buf_ptr = dma_map_single(NULL, skb->data, skb->len,
 								DMA_TO_DEVICE);
 	pkt_info.return_info = skb;
-	mp->tx_ring_skbs++;
 	status = eth_port_send(mp, &pkt_info);
 	if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL))
 		printk(KERN_ERR "%s: Error on transmitting packet\n",
@@ -1356,6 +1337,43 @@ static struct net_device_stats *mv643xx_eth_get_stats(struct net_device *dev)
 	return &mp->stats;
 }
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static inline void mv643xx_enable_irq(struct mv643xx_private *mp)
+{
+	int port_num = mp->port_num;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mp->lock, flags);
+	mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num),
+					INT_CAUSE_UNMASK_ALL);
+	mv_write(MV643XX_ETH_INTERRUPT_EXTEND_MASK_REG(port_num),
+					INT_CAUSE_UNMASK_ALL_EXT);
+	spin_unlock_irqrestore(&mp->lock, flags);
+}
+
+static inline void mv643xx_disable_irq(struct mv643xx_private *mp)
+{
+	int port_num = mp->port_num;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mp->lock, flags);
+	mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num),
+					INT_CAUSE_MASK_ALL);
+	mv_write(MV643XX_ETH_INTERRUPT_EXTEND_MASK_REG(port_num),
+					INT_CAUSE_MASK_ALL_EXT);
+	spin_unlock_irqrestore(&mp->lock, flags);
+}
+
+static void mv643xx_netpoll(struct net_device *netdev)
+{
+	struct mv643xx_private *mp = netdev_priv(netdev);
+
+	mv643xx_disable_irq(mp);
+	mv643xx_eth_int_handler(netdev->irq, netdev, NULL);
+	mv643xx_enable_irq(mp);
+}
+#endif
+
 /*/
  * mv643xx_eth_probe
  *
@@ -1406,6 +1424,10 @@ static int mv643xx_eth_probe(struct device *ddev)
 	dev->weight = 64;
 #endif
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = mv643xx_netpoll;
+#endif
+
 	dev->watchdog_timeo = 2 * HZ;
 	dev->tx_queue_len = mp->tx_ring_size;
 	dev->base_addr = 0;
@@ -1883,6 +1905,9 @@ static void eth_port_start(struct mv643xx_private *mp)
 	/* Enable port Rx. */
 	mv_write(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num),
 						mp->port_rx_queue_command);
+
+	/* Disable port bandwidth limits by clearing MTU register */
+	mv_write(MV643XX_ETH_MAXIMUM_TRANSMIT_UNIT(port_num), 0);
 }
 
 /*
@@ -2292,34 +2317,6 @@ static void eth_port_reset(unsigned int port_num)
 	mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num), reg_data);
 }
 
-/*
- * ethernet_set_config_reg - Set specified bits in configuration register.
- *
- * DESCRIPTION:
- *	This function sets specified bits in the given ethernet
- *	configuration register.
- *
- * INPUT:
- *	unsigned int	eth_port_num	Ethernet Port number.
- *	unsigned int	value		32 bit value.
- *
- * OUTPUT:
- *	The set bits in the value parameter are set in the configuration
- *	register.
- *
- * RETURN:
- *	None.
- *
- */
-static void ethernet_set_config_reg(unsigned int eth_port_num,
-							unsigned int value)
-{
-	unsigned int eth_config_reg;
-
-	eth_config_reg = mv_read(MV643XX_ETH_PORT_CONFIG_REG(eth_port_num));
-	eth_config_reg |= value;
-	mv_write(MV643XX_ETH_PORT_CONFIG_REG(eth_port_num), eth_config_reg);
-}
 
 static int eth_port_autoneg_supported(unsigned int eth_port_num)
 {
@@ -2346,31 +2343,6 @@ static int eth_port_link_is_up(unsigned int eth_port_num)
 }
 
 /*
- * ethernet_get_config_reg - Get the port configuration register
- *
- * DESCRIPTION:
- *	This function returns the configuration register value of the given
- *	ethernet port.
- *
- * INPUT:
- *	unsigned int	eth_port_num	Ethernet Port number.
- *
- * OUTPUT:
- *	None.
- *
- * RETURN:
- *	Port configuration register value.
- */
-static unsigned int ethernet_get_config_reg(unsigned int eth_port_num)
-{
-	unsigned int eth_config_reg;
-
-	eth_config_reg = mv_read(MV643XX_ETH_PORT_CONFIG_EXTEND_REG
-								(eth_port_num));
-	return eth_config_reg;
-}
-
-/*
  * eth_port_read_smi_reg - Read PHY registers
  *
  * DESCRIPTION:
@@ -2528,6 +2500,9 @@ static ETH_FUNC_RET_STATUS eth_port_send(struct mv643xx_private *mp,
 		return ETH_ERROR;
 	}
 
+	mp->tx_ring_skbs++;
+	BUG_ON(mp->tx_ring_skbs > mp->tx_ring_size);
+
 	/* Get the Tx Desc ring indexes */
 	tx_desc_curr = mp->tx_curr_desc_q;
 	tx_desc_used = mp->tx_used_desc_q;
@@ -2594,6 +2569,9 @@ static ETH_FUNC_RET_STATUS eth_port_send(struct mv643xx_private *mp,
 	if (mp->tx_resource_err)
 		return ETH_QUEUE_FULL;
 
+	mp->tx_ring_skbs++;
+	BUG_ON(mp->tx_ring_skbs > mp->tx_ring_size);
+
 	/* Get the Tx Desc ring indexes */
 	tx_desc_curr = mp->tx_curr_desc_q;
 	tx_desc_used = mp->tx_used_desc_q;
@@ -2694,6 +2672,9 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc(struct mv643xx_private *mp,
 	/* Any Tx return cancels the Tx resource error status */
 	mp->tx_resource_err = 0;
 
+	BUG_ON(mp->tx_ring_skbs == 0);
+	mp->tx_ring_skbs--;
+
 	return ETH_OK;
 }
 
diff --git a/drivers/net/mv643xx_eth.h b/drivers/net/mv643xx_eth.h
index 7678b59c2952..bcfda5192da0 100644
--- a/drivers/net/mv643xx_eth.h
+++ b/drivers/net/mv643xx_eth.h
@@ -408,10 +408,6 @@ static void eth_port_init(struct mv643xx_private *mp);
 static void eth_port_reset(unsigned int eth_port_num);
 static void eth_port_start(struct mv643xx_private *mp);
 
-static void ethernet_set_config_reg(unsigned int eth_port_num,
-				    unsigned int value);
-static unsigned int ethernet_get_config_reg(unsigned int eth_port_num);
-
 /* Port MAC address routines */
 static void eth_port_uc_addr_set(unsigned int eth_port_num,
 				 unsigned char *p_addr);
diff --git a/drivers/net/ne3210.c b/drivers/net/ne3210.c
index 6c92f0969015..73501d846588 100644
--- a/drivers/net/ne3210.c
+++ b/drivers/net/ne3210.c
@@ -26,9 +26,6 @@
 	Updated to EISA probing API 5/2003 by Marc Zyngier.
 */
 
-static const char *version =
-	"ne3210.c: Driver revision v0.03, 30/09/98\n";
-
 #include <linux/module.h>
 #include <linux/eisa.h>
 #include <linux/kernel.h>
@@ -197,7 +194,7 @@ static int __init ne3210_eisa_probe (struct device *device)
 	ei_status.priv = phys_mem;
 
 	if (ei_debug > 0)
-		printk(version);
+		printk("ne3210 loaded.\n");
 
 	ei_status.reset_8390 = &ne3210_reset_8390;
 	ei_status.block_input = &ne3210_block_input;
@@ -360,12 +357,12 @@ MODULE_DESCRIPTION("NE3210 EISA Ethernet driver");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(eisa, ne3210_ids);
 
-int ne3210_init(void)
+static int ne3210_init(void)
 {
 	return eisa_driver_register (&ne3210_eisa_driver);
 }
 
-void ne3210_cleanup(void)
+static void ne3210_cleanup(void)
 {
 	eisa_driver_unregister (&ne3210_eisa_driver);
 }
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 6a2fe3583478..14f4de1a8180 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -6,7 +6,7 @@ menu "PHY device support"
 
 config PHYLIB
 	tristate "PHY Device support and infrastructure"
-	depends on NET_ETHERNET
+	depends on NET_ETHERNET && (BROKEN || !ARCH_S390)
 	help
 	  Ethernet controllers are usually attached to PHY
 	  devices.  This option provides infrastructure for
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 5e81494e9a9a..90630672703d 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -170,7 +170,7 @@ int __init mdio_bus_init(void)
 	return bus_register(&mdio_bus_type);
 }
 
-void __exit mdio_bus_exit(void)
+void mdio_bus_exit(void)
 {
 	bus_unregister(&mdio_bus_type);
 }
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 7ca78228b104..5dda043bd9d7 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -686,7 +686,7 @@ static void free_shared_mem(struct s2io_nic *nic)
 
 static int s2io_verify_pci_mode(nic_t *nic)
 {
-	XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+	XENA_dev_config_t __iomem *bar0 = nic->bar0;
 	register u64 val64 = 0;
 	int     mode;
 
@@ -704,7 +704,7 @@ static int s2io_verify_pci_mode(nic_t *nic)
  */
 static int s2io_print_pci_mode(nic_t *nic)
 {
-	XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+	XENA_dev_config_t __iomem *bar0 = nic->bar0;
 	register u64 val64 = 0;
 	int	mode;
 	struct config_param *config = &nic->config;
@@ -1403,7 +1403,7 @@ static int init_nic(struct s2io_nic *nic)
 	writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7);
 
 	/* Disable RMAC PAD STRIPPING */
-	add = (void *) &bar0->mac_cfg;
+	add = &bar0->mac_cfg;
 	val64 = readq(&bar0->mac_cfg);
 	val64 &= ~(MAC_CFG_RMAC_STRIP_PAD);
 	writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
@@ -1934,7 +1934,7 @@ static int start_nic(struct s2io_nic *nic)
 		val64 |= 0x0000800000000000ULL;
 		writeq(val64, &bar0->gpio_control);
 		val64 = 0x0411040400000000ULL;
-		writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700));
+		writeq(val64, (void __iomem *)bar0 + 0x2700);
 	}
 
 	/*
@@ -2395,7 +2395,7 @@ static int s2io_poll(struct net_device *dev, int *budget)
 	int pkt_cnt = 0, org_pkts_to_process;
 	mac_info_t *mac_control;
 	struct config_param *config;
-	XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+	XENA_dev_config_t __iomem *bar0 = nic->bar0;
 	u64 val64;
 	int i;
 
@@ -2831,7 +2831,7 @@ void s2io_reset(nic_t * sp)
 		val64 |= 0x0000800000000000ULL;
 		writeq(val64, &bar0->gpio_control);
 		val64 = 0x0411040400000000ULL;
-		writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700));
+		writeq(val64, (void __iomem *)bar0 + 0x2700);
 	}
 
 	/*
@@ -3234,7 +3234,7 @@ s2io_alarm_handle(unsigned long data)
 
 static void s2io_txpic_intr_handle(nic_t *sp)
 {
-	XENA_dev_config_t *bar0 = (XENA_dev_config_t *) sp->bar0;
+	XENA_dev_config_t __iomem *bar0 = sp->bar0;
 	u64 val64;
 
 	val64 = readq(&bar0->pic_int_status);
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index bf3440aa6c24..92f75529eff8 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -179,14 +179,6 @@ enum sis190_register_content {
 	TxInterFrameGapShift	= 24,
 	TxDMAShift		= 8, /* DMA burst value (0-7) is shift this many bits */
 
-	/* StationControl */
-	_1000bpsF		= 0x1c00,
-	_1000bpsH		= 0x0c00,
-	_100bpsF		= 0x1800,
-	_100bpsH		= 0x0800,
-	_10bpsF			= 0x1400,
-	_10bpsH			= 0x0400,
-
 	LinkStatus		= 0x02,		// unused
 	FullDup			= 0x01,		// unused
 
@@ -279,6 +271,12 @@ enum sis190_eeprom_address {
 	EEPROMMACAddr	= 0x03
 };
 
+enum sis190_feature {
+	F_HAS_RGMII	= 1,
+	F_PHY_88E1111	= 2,
+	F_PHY_BCM5461	= 4
+};
+
 struct sis190_private {
 	void __iomem *mmio_addr;
 	struct pci_dev *pci_dev;
@@ -300,6 +298,7 @@ struct sis190_private {
 	u32 msg_enable;
 	struct mii_if_info mii_if;
 	struct list_head first_phy;
+	u32 features;
 };
 
 struct sis190_phy {
@@ -321,24 +320,25 @@ static struct mii_chip_info {
         const char *name;
         u16 id[2];
         unsigned int type;
+	u32 feature;
 } mii_chip_table[] = {
-	{ "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN },
-	{ "Agere PHY ET1101B",    { 0x0282, 0xf010 }, LAN },
-	{ "Marvell PHY 88E1111",  { 0x0141, 0x0cc0 }, LAN },
-	{ "Realtek PHY RTL8201",  { 0x0000, 0x8200 }, LAN },
+	{ "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN, F_PHY_BCM5461 },
+	{ "Agere PHY ET1101B",    { 0x0282, 0xf010 }, LAN, 0 },
+	{ "Marvell PHY 88E1111",  { 0x0141, 0x0cc0 }, LAN, F_PHY_88E1111 },
+	{ "Realtek PHY RTL8201",  { 0x0000, 0x8200 }, LAN, 0 },
 	{ NULL, }
 };
 
 const static struct {
 	const char *name;
-	u8 version;		/* depend on docs */
-	u32 RxConfigMask;	/* clear the bits supported by this chip */
 } sis_chip_info[] = {
-	{ DRV_NAME, 0x00, 0xff7e1880, },
+	{ "SiS 190 PCI Fast Ethernet adapter" },
+	{ "SiS 191 PCI Gigabit Ethernet adapter" },
 };
 
 static struct pci_device_id sis190_pci_tbl[] __devinitdata = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0190), 0, 0, 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0191), 0, 0, 1 },
 	{ 0, },
 };
 
@@ -360,7 +360,7 @@ MODULE_VERSION(DRV_VERSION);
 MODULE_LICENSE("GPL");
 
 static const u32 sis190_intr_mask =
-	RxQEmpty | RxQInt | TxQ1Int | TxQ0Int | RxHalt | TxHalt;
+	RxQEmpty | RxQInt | TxQ1Int | TxQ0Int | RxHalt | TxHalt | LinkChange;
 
 /*
  * Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
@@ -879,11 +879,6 @@ static void sis190_hw_start(struct net_device *dev)
 
 	SIS_W32(IntrStatus, 0xffffffff);
 	SIS_W32(IntrMask, 0x0);
-	/*
-	 * Default is 100Mbps.
-	 * A bit strange: 100Mbps is 0x1801 elsewhere -- FR 2005/06/09
-	 */
-	SIS_W16(StationControl, 0x1901);
 	SIS_W32(GMIIControl, 0x0);
 	SIS_W32(TxMacControl, 0x60);
 	SIS_W16(RxMacControl, 0x02);
@@ -923,35 +918,30 @@ static void sis190_phy_task(void * data)
 		     BMSR_ANEGCOMPLETE)) {
 		net_link(tp, KERN_WARNING "%s: PHY reset until link up.\n",
 			 dev->name);
+		netif_carrier_off(dev);
 		mdio_write(ioaddr, phy_id, MII_BMCR, val | BMCR_RESET);
 		mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT);
 	} else {
 		/* Rejoice ! */
 		struct {
 			int val;
+			u32 ctl;
 			const char *msg;
-			u16 ctl;
 		} reg31[] = {
-			{ LPA_1000XFULL | LPA_SLCT,
-				"1000 Mbps Full Duplex",
-				0x01 | _1000bpsF },
-			{ LPA_1000XHALF | LPA_SLCT,
-				"1000 Mbps Half Duplex",
-				0x01 | _1000bpsH },
-			{ LPA_100FULL,
-				"100 Mbps Full Duplex",
-				0x01 | _100bpsF },
-			{ LPA_100HALF,
-				"100 Mbps Half Duplex",
-				0x01 | _100bpsH },
-			{ LPA_10FULL,
-				"10 Mbps Full Duplex",
-				0x01 | _10bpsF },
-			{ LPA_10HALF,
-				"10 Mbps Half Duplex",
-				0x01 | _10bpsH },
-			{ 0, "unknown", 0x0000 }
-		}, *p;
+			{ LPA_1000XFULL | LPA_SLCT, 0x07000c00 | 0x00001000,
+				"1000 Mbps Full Duplex" },
+			{ LPA_1000XHALF | LPA_SLCT, 0x07000c00,
+				"1000 Mbps Half Duplex" },
+			{ LPA_100FULL, 0x04000800 | 0x00001000,
+				"100 Mbps Full Duplex" },
+			{ LPA_100HALF, 0x04000800,
+				"100 Mbps Half Duplex" },
+			{ LPA_10FULL, 0x04000400 | 0x00001000,
+				"10 Mbps Full Duplex" },
+			{ LPA_10HALF, 0x04000400,
+				"10 Mbps Half Duplex" },
+			{ 0, 0x04000400, "unknown" }
+ 		}, *p;
 		u16 adv;
 
 		val = mdio_read(ioaddr, phy_id, 0x1f);
@@ -964,12 +954,29 @@ static void sis190_phy_task(void * data)
 
 		val &= adv;
 
-		for (p = reg31; p->ctl; p++) {
+		for (p = reg31; p->val; p++) {
 			if ((val & p->val) == p->val)
 				break;
 		}
-		if (p->ctl)
-			SIS_W16(StationControl, p->ctl);
+
+		p->ctl |= SIS_R32(StationControl) & ~0x0f001c00;
+
+		if ((tp->features & F_HAS_RGMII) &&
+		    (tp->features & F_PHY_BCM5461)) {
+			// Set Tx Delay in RGMII mode.
+			mdio_write(ioaddr, phy_id, 0x18, 0xf1c7);
+			udelay(200);
+			mdio_write(ioaddr, phy_id, 0x1c, 0x8c00);
+			p->ctl |= 0x03000000;
+		}
+
+		SIS_W32(StationControl, p->ctl);
+
+		if (tp->features & F_HAS_RGMII) {
+			SIS_W32(RGDelay, 0x0441);
+			SIS_W32(RGDelay, 0x0440);
+		}
+
 		net_link(tp, KERN_INFO "%s: link on %s mode.\n", dev->name,
 			 p->msg);
 		netif_carrier_on(dev);
@@ -1308,6 +1315,7 @@ static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp,
 		phy->type = (p->type == MIX) ?
 			((mii_status & (BMSR_100FULL | BMSR_100HALF)) ?
 				LAN : HOME) : p->type;
+		tp->features |= p->feature;
 	} else
 		phy->type = UNKNOWN;
 
@@ -1316,6 +1324,25 @@ static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp,
 		  (phy->type == UNKNOWN) ? "Unknown PHY" : p->name, phy_id);
 }
 
+static void sis190_mii_probe_88e1111_fixup(struct sis190_private *tp)
+{
+	if (tp->features & F_PHY_88E1111) {
+		void __iomem *ioaddr = tp->mmio_addr;
+		int phy_id = tp->mii_if.phy_id;
+		u16 reg[2][2] = {
+			{ 0x808b, 0x0ce1 },
+			{ 0x808f, 0x0c60 }
+		}, *p;
+
+		p = (tp->features & F_HAS_RGMII) ? reg[0] : reg[1];
+
+		mdio_write(ioaddr, phy_id, 0x1b, p[0]);
+		udelay(200);
+		mdio_write(ioaddr, phy_id, 0x14, p[1]);
+		udelay(200);
+	}
+}
+
 /**
  *	sis190_mii_probe - Probe MII PHY for sis190
  *	@dev: the net device to probe for
@@ -1366,6 +1393,8 @@ static int __devinit sis190_mii_probe(struct net_device *dev)
 	/* Select default PHY for mac */
 	sis190_default_phy(dev);
 
+	sis190_mii_probe_88e1111_fixup(tp);
+
 	mii_if->dev = dev;
 	mii_if->mdio_read = __mdio_read;
 	mii_if->mdio_write = __mdio_write;
@@ -1505,6 +1534,11 @@ static void sis190_tx_timeout(struct net_device *dev)
 	netif_wake_queue(dev);
 }
 
+static void sis190_set_rgmii(struct sis190_private *tp, u8 reg)
+{
+	tp->features |= (reg & 0x80) ? F_HAS_RGMII : 0;
+}
+
 static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev,
 						     struct net_device *dev)
 {
@@ -1532,6 +1566,8 @@ static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev,
 		((u16 *)dev->dev_addr)[0] = le16_to_cpu(w);
 	}
 
+	sis190_set_rgmii(tp, sis190_read_eeprom(ioaddr, EEPROMInfo));
+
 	return 0;
 }
 
@@ -1577,6 +1613,8 @@ static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev,
 	outb(0x12, 0x78);
 	reg = inb(0x79);
 
+	sis190_set_rgmii(tp, reg);
+
 	/* Restore the value to ISA Bridge */
 	pci_write_config_byte(isa_bridge, 0x48, tmp8);
 	pci_dev_put(isa_bridge);
@@ -1799,6 +1837,9 @@ static int __devinit sis190_init_one(struct pci_dev *pdev,
 	       dev->dev_addr[2], dev->dev_addr[3],
 	       dev->dev_addr[4], dev->dev_addr[5]);
 
+	net_probe(tp, KERN_INFO "%s: %s mode.\n", dev->name,
+		  (tp->features & F_HAS_RGMII) ? "RGMII" : "GMII");
+
 	netif_carrier_off(dev);
 
 	sis190_set_speed_auto(dev);
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 5ae22b7bc5ca..1a4316336256 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -21,7 +21,6 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/timer.h>
-#include <linux/ptrace.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
@@ -34,6 +33,7 @@
 #include <linux/skbuff.h>
 #include <linux/delay.h>
 #include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/processor.h>
 #include <asm/bitops.h>
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index dd7dbf7b14d4..00a07f32a81e 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -289,8 +289,8 @@ config APPLE_AIRPORT
 	  a non-standard interface
 
 config PLX_HERMES
-	tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)"
-	depends on PCI && HERMES && EXPERIMENTAL
+	tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"
+	depends on PCI && HERMES
 	help
 	  Enable support for PCMCIA cards supported by the "Hermes" (aka
 	  orinoco) driver when used in PLX9052 based PCI adaptors.  These
@@ -299,12 +299,9 @@ config PLX_HERMES
 	  802.11b PCMCIA cards can be used in desktop machines.  The Netgear
 	  MA301 is such an adaptor.
 
-	  Support for these adaptors is so far still incomplete and buggy.
-	  You have been warned.
-
 config TMD_HERMES
-	tristate "Hermes in TMD7160 based PCI adaptor support (EXPERIMENTAL)"
-	depends on PCI && HERMES && EXPERIMENTAL
+	tristate "Hermes in TMD7160 based PCI adaptor support"
+	depends on PCI && HERMES
 	help
 	  Enable support for PCMCIA cards supported by the "Hermes" (aka
 	  orinoco) driver when used in TMD7160 based PCI adaptors.  These
@@ -312,12 +309,18 @@ config TMD_HERMES
 	  PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
 	  802.11b PCMCIA cards can be used in desktop machines.
 
-	  Support for these adaptors is so far still incomplete and buggy.
-	  You have been warned.
+config NORTEL_HERMES
+	tristate "Nortel emobility PCI adaptor support"
+	depends on PCI && HERMES
+	help
+	  Enable support for PCMCIA cards supported by the "Hermes" (aka
+	  orinoco) driver when used in Nortel emobility PCI adaptors.  These
+	  adaptors are not full PCMCIA controllers, but act as a more limited
+	  PCI <-> PCMCIA bridge.
 
 config PCI_HERMES
-	tristate "Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)"
-	depends on PCI && HERMES && EXPERIMENTAL
+	tristate "Prism 2.5 PCI 802.11b adaptor support"
+	depends on PCI && HERMES
 	help
 	  Enable support for PCI and mini-PCI 802.11b wireless NICs based on
 	  the Prism 2.5 chipset.  These are true PCI cards, not the 802.11b
@@ -372,6 +375,19 @@ config PCMCIA_HERMES
 	  configure your card and that /etc/pcmcia/wireless.opts works:
 	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 
+config PCMCIA_SPECTRUM
+	tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
+	depends on NET_RADIO && PCMCIA && HERMES
+	---help---
+
+	  This is a driver for 802.11b cards using RAM-loadable Symbol
+	  firmware, such as Symbol Wireless Networker LA4100, CompactFlash
+	  cards by Socket Communications and Intel PRO/Wireless 2011B.
+
+	  This driver requires firmware download on startup.  Utilities
+	  for downloading Symbol firmware are available at
+	  <http://sourceforge.net/projects/orinoco/>
+
 config AIRO_CS
 	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
 	depends on NET_RADIO && PCMCIA && (BROKEN || !M32R)
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 0953cc0cdee6..3a6f7ba326ca 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -22,6 +22,8 @@ obj-$(CONFIG_APPLE_AIRPORT)	+= airport.o
 obj-$(CONFIG_PLX_HERMES)	+= orinoco_plx.o
 obj-$(CONFIG_PCI_HERMES)	+= orinoco_pci.o
 obj-$(CONFIG_TMD_HERMES)	+= orinoco_tmd.o
+obj-$(CONFIG_NORTEL_HERMES)	+= orinoco_nortel.o
+obj-$(CONFIG_PCMCIA_SPECTRUM)	+= spectrum_cs.o
 
 obj-$(CONFIG_AIRO)		+= airo.o
 obj-$(CONFIG_AIRO_CS)		+= airo_cs.o airo.o
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index a47fce4beadf..2414e6493aa5 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -327,38 +327,38 @@ static struct iw_handler_def ipw2100_wx_handler_def;
 
 static inline void read_register(struct net_device *dev, u32 reg, u32 *val)
 {
-	*val = readl((void *)(dev->base_addr + reg));
+	*val = readl((void __iomem *)(dev->base_addr + reg));
 	IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg, *val);
 }
 
 static inline void write_register(struct net_device *dev, u32 reg, u32 val)
 {
-	writel(val, (void *)(dev->base_addr + reg));
+	writel(val, (void __iomem *)(dev->base_addr + reg));
 	IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg, val);
 }
 
 static inline void read_register_word(struct net_device *dev, u32 reg, u16 *val)
 {
-	*val = readw((void *)(dev->base_addr + reg));
+	*val = readw((void __iomem *)(dev->base_addr + reg));
 	IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg, *val);
 }
 
 static inline void read_register_byte(struct net_device *dev, u32 reg, u8 *val)
 {
-	*val = readb((void *)(dev->base_addr + reg));
+	*val = readb((void __iomem *)(dev->base_addr + reg));
 	IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg, *val);
 }
 
 static inline void write_register_word(struct net_device *dev, u32 reg, u16 val)
 {
-	writew(val, (void *)(de