Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (43 commits)
  net: Fix 'Re: PACKET_TX_RING: packet size is too long'
  netdev: usb: dm9601.c can drive a device not supported yet, add support for it
  qlge: Fix firmware mailbox command timeout.
  qlge: Fix EEH handling.
  AF_RAW: Augment raw_send_hdrinc to expand skb to fit iphdr->ihl (v2)
  bonding: fix a race condition in calls to slave MII ioctls
  virtio-net: fix data corruption with OOM
  sfc: Set ip_summed correctly for page buffers passed to GRO
  cnic: Fix L2CTX_STATUSB_NUM offset in context memory.
  MAINTAINERS: rt2x00 list is moderated
  airo: Reorder tests, check bounds before element
  mac80211: fix for incorrect sequence number on hostapd injected frames
  libertas spi: fix sparse errors
  mac80211: trivial: fix spelling in mesh_hwmp
  cfg80211: sme: deauthenticate on assoc failure
  mac80211: keep auth state when assoc fails
  mac80211: fix ibss joining
  b43: add 'struct b43_wl' missing declaration
  b43: Fix Bugzilla #14181 and the bug from the previous 'fix'
  rt2x00: Fix crypto in TX frame for rt2800usb
  ...

33 files changed, 727 insertions, 359 deletions

diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 04f63c77071d..ce6f1ac25df8 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -34,6 +34,7 @@
  *
  *
  */
+#include <linux/capability.h>
 #include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 6c7f795d12de..a4d83409f205 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -361,9 +361,12 @@ struct l2_fhdr {
 #define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE	 (1<<28)
 
 #define BNX2_L2CTX_HOST_BDIDX				0x00000004
-#define BNX2_L2CTX_STATUSB_NUM_SHIFT			 16
-#define BNX2_L2CTX_STATUSB_NUM(sb_id)			 \
-	(((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_STATUSB_NUM_SHIFT) : 0)
+#define BNX2_L2CTX_L5_STATUSB_NUM_SHIFT			 16
+#define BNX2_L2CTX_L2_STATUSB_NUM_SHIFT			 24
+#define BNX2_L2CTX_L5_STATUSB_NUM(sb_id)		\
+	(((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_L5_STATUSB_NUM_SHIFT) : 0)
+#define BNX2_L2CTX_L2_STATUSB_NUM(sb_id)		\
+	(((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_L2_STATUSB_NUM_SHIFT) : 0)
 #define BNX2_L2CTX_HOST_BSEQ				0x00000008
 #define BNX2_L2CTX_NX_BSEQ				0x0000000c
 #define BNX2_L2CTX_NX_BDHADDR_HI			0x00000010
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 69c5b15e22da..40fb5eefc72e 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -691,7 +691,7 @@ static int bond_check_dev_link(struct bonding *bond,
 			       struct net_device *slave_dev, int reporting)
 {
 	const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
-	static int (*ioctl)(struct net_device *, struct ifreq *, int);
+	int (*ioctl)(struct net_device *, struct ifreq *, int);
 	struct ifreq ifr;
 	struct mii_ioctl_data *mii;
 
@@ -3665,10 +3665,10 @@ static int bond_xmit_hash_policy_l23(struct sk_buff *skb,
 
 	if (skb->protocol == htons(ETH_P_IP)) {
 		return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^
-			(data->h_dest[5] ^ bond_dev->dev_addr[5])) % count;
+			(data->h_dest[5] ^ data->h_source[5])) % count;
 	}
 
-	return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count;
+	return (data->h_dest[5] ^ data->h_source[5]) % count;
 }
 
 /*
@@ -3695,7 +3695,7 @@ static int bond_xmit_hash_policy_l34(struct sk_buff *skb,
 
 	}
 
-	return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count;
+	return (data->h_dest[5] ^ data->h_source[5]) % count;
 }
 
 /*
@@ -3706,7 +3706,7 @@ static int bond_xmit_hash_policy_l2(struct sk_buff *skb,
 {
 	struct ethhdr *data = (struct ethhdr *)skb->data;
 
-	return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count;
+	return (data->h_dest[5] ^ data->h_source[5]) % count;
 }
 
 /*-------------------------- Device entry points ----------------------------*/
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 46c87ec7960c..3bf1b04f2cab 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -2264,9 +2264,9 @@ static void cnic_init_bnx2_rx_ring(struct cnic_dev *dev)
 	cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_CTX_TYPE, val);
 
 	if (sb_id == 0)
-		val = 2 << BNX2_L2CTX_STATUSB_NUM_SHIFT;
+		val = 2 << BNX2_L2CTX_L2_STATUSB_NUM_SHIFT;
 	else
-		val = BNX2_L2CTX_STATUSB_NUM(sb_id);
+		val = BNX2_L2CTX_L2_STATUSB_NUM(sb_id);
 	cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_HOST_BDIDX, val);
 
 	rxbd = (struct rx_bd *) (cp->l2_ring + BCM_PAGE_SIZE);
@@ -2423,7 +2423,7 @@ static int cnic_start_bnx2_hw(struct cnic_dev *dev)
 	cp->int_num = 0;
 	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
 		u32 sb_id = cp->status_blk_num;
-		u32 sb = BNX2_L2CTX_STATUSB_NUM(sb_id);
+		u32 sb = BNX2_L2CTX_L5_STATUSB_NUM(sb_id);
 
 		cp->int_num = sb_id << BNX2_PCICFG_INT_ACK_CMD_INT_NUM_SHIFT;
 		cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_HOST_QIDX, sb);
diff --git a/drivers/net/dm9000.h b/drivers/net/dm9000.h
index 80817c2edfb3..fb1c924d79b4 100644
--- a/drivers/net/dm9000.h
+++ b/drivers/net/dm9000.h
@@ -50,7 +50,7 @@
 #define DM9000_RCSR	       0x32
 
 #define CHIPR_DM9000A	       0x19
-#define CHIPR_DM9000B	       0x1B
+#define CHIPR_DM9000B	       0x1A
 
 #define DM9000_MRCMDX          0xF0
 #define DM9000_MRCMD           0xF2
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 981936c1fb46..405a144ebcad 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -519,9 +519,13 @@ extern s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw);
 extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw);
 extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw);
 extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
+                                          u16 *data);
 extern s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw);
 extern s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active);
 extern s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
+                                           u16 data);
 extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw);
 extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw);
 extern s32 e1000e_get_cfg_done(struct e1000_hw *hw);
@@ -538,7 +542,11 @@ extern s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data);
 extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
 extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
 extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
+                                        u16 data);
 extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
+                                       u16 *data);
 extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
 			       u32 usec_interval, bool *success);
 extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
@@ -546,7 +554,11 @@ extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
 extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
 extern s32 e1000e_check_downshift(struct e1000_hw *hw);
 extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
+                                        u16 *data);
 extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
+                                         u16 data);
 extern s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow);
 extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
 extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index fd44d9f90769..7b05cf47f7f5 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -764,11 +764,13 @@ struct e1000_phy_operations {
 	s32  (*get_cable_length)(struct e1000_hw *);
 	s32  (*get_phy_info)(struct e1000_hw *);
 	s32  (*read_phy_reg)(struct e1000_hw *, u32, u16 *);
+	s32  (*read_phy_reg_locked)(struct e1000_hw *, u32, u16 *);
 	void (*release_phy)(struct e1000_hw *);
 	s32  (*reset_phy)(struct e1000_hw *);
 	s32  (*set_d0_lplu_state)(struct e1000_hw *, bool);
 	s32  (*set_d3_lplu_state)(struct e1000_hw *, bool);
 	s32  (*write_phy_reg)(struct e1000_hw *, u32, u16);
+	s32  (*write_phy_reg_locked)(struct e1000_hw *, u32, u16);
 	s32  (*cfg_on_link_up)(struct e1000_hw *);
 };
 
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 99df2abf82a9..b6388b9535fd 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -122,6 +122,13 @@
 
 #define HV_LED_CONFIG		PHY_REG(768, 30) /* LED Configuration */
 
+#define SW_FLAG_TIMEOUT    1000 /* SW Semaphore flag timeout in milliseconds */
+
+/* OEM Bits Phy Register */
+#define HV_OEM_BITS            PHY_REG(768, 25)
+#define HV_OEM_BITS_LPLU       0x0004 /* Low Power Link Up */
+#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */
+
 /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
 /* Offset 04h HSFSTS */
 union ich8_hws_flash_status {
@@ -200,6 +207,7 @@ static s32 e1000_setup_led_pchlan(struct e1000_hw *hw);
 static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
 static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
 static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
+static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
 
 static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
 {
@@ -242,7 +250,11 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 
 	phy->ops.check_polarity       = e1000_check_polarity_ife_ich8lan;
 	phy->ops.read_phy_reg         = e1000_read_phy_reg_hv;
+	phy->ops.read_phy_reg_locked  = e1000_read_phy_reg_hv_locked;
+	phy->ops.set_d0_lplu_state    = e1000_set_lplu_state_pchlan;
+	phy->ops.set_d3_lplu_state    = e1000_set_lplu_state_pchlan;
 	phy->ops.write_phy_reg        = e1000_write_phy_reg_hv;
+	phy->ops.write_phy_reg_locked = e1000_write_phy_reg_hv_locked;
 	phy->autoneg_mask             = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 
 	phy->id = e1000_phy_unknown;
@@ -303,6 +315,8 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
 	case IGP03E1000_E_PHY_ID:
 		phy->type = e1000_phy_igp_3;
 		phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+		phy->ops.read_phy_reg_locked = e1000e_read_phy_reg_igp_locked;
+		phy->ops.write_phy_reg_locked = e1000e_write_phy_reg_igp_locked;
 		break;
 	case IFE_E_PHY_ID:
 	case IFE_PLUS_E_PHY_ID:
@@ -568,12 +582,39 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 static DEFINE_MUTEX(nvm_mutex);
 
 /**
+ *  e1000_acquire_nvm_ich8lan - Acquire NVM mutex
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquires the mutex for performing NVM operations.
+ **/
+static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw)
+{
+	mutex_lock(&nvm_mutex);
+
+	return 0;
+}
+
+/**
+ *  e1000_release_nvm_ich8lan - Release NVM mutex
+ *  @hw: pointer to the HW structure
+ *
+ *  Releases the mutex used while performing NVM operations.
+ **/
+static void e1000_release_nvm_ich8lan(struct e1000_hw *hw)
+{
+	mutex_unlock(&nvm_mutex);
+
+	return;
+}
+
+static DEFINE_MUTEX(swflag_mutex);
+
+/**
  *  e1000_acquire_swflag_ich8lan - Acquire software control flag
  *  @hw: pointer to the HW structure
  *
- *  Acquires the software control flag for performing NVM and PHY
- *  operations.  This is a function pointer entry point only called by
- *  read/write routines for the PHY and NVM parts.
+ *  Acquires the software control flag for performing PHY and select
+ *  MAC CSR accesses.
  **/
 static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 {
@@ -582,7 +623,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 
 	might_sleep();
 
-	mutex_lock(&nvm_mutex);
+	mutex_lock(&swflag_mutex);
 
 	while (timeout) {
 		extcnf_ctrl = er32(EXTCNF_CTRL);
@@ -599,7 +640,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 		goto out;
 	}
 
-	timeout = PHY_CFG_TIMEOUT * 2;
+	timeout = SW_FLAG_TIMEOUT;
 
 	extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
 	ew32(EXTCNF_CTRL, extcnf_ctrl);
@@ -623,7 +664,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 
 out:
 	if (ret_val)
-		mutex_unlock(&nvm_mutex);
+		mutex_unlock(&swflag_mutex);
 
 	return ret_val;
 }
@@ -632,9 +673,8 @@ out:
  *  e1000_release_swflag_ich8lan - Release software control flag
  *  @hw: pointer to the HW structure
  *
- *  Releases the software control flag for performing NVM and PHY operations.
- *  This is a function pointer entry point only called by read/write
- *  routines for the PHY and NVM parts.
+ *  Releases the software control flag for performing PHY and select
+ *  MAC CSR accesses.
  **/
 static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
 {
@@ -644,7 +684,9 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
 	extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
 	ew32(EXTCNF_CTRL, extcnf_ctrl);
 
-	mutex_unlock(&nvm_mutex);
+	mutex_unlock(&swflag_mutex);
+
+	return;
 }
 
 /**
@@ -844,7 +886,7 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
 	u32 i;
 	u32 data, cnf_size, cnf_base_addr, sw_cfg_mask;
 	s32 ret_val;
-	u16 word_addr, reg_data, reg_addr, phy_page = 0;
+	u16 reg, word_addr, reg_data, reg_addr, phy_page = 0;
 
 	ret_val = e1000e_phy_hw_reset_generic(hw);
 	if (ret_val)
@@ -859,6 +901,10 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
 			return ret_val;
 	}
 
+	/* Dummy read to clear the phy wakeup bit after lcd reset */
+	if (hw->mac.type == e1000_pchlan)
+		e1e_rphy(hw, BM_WUC, &reg);
+
 	/*
 	 * Initialize the PHY from the NVM on ICH platforms.  This
 	 * is needed due to an issue where the NVM configuration is
@@ -1054,6 +1100,38 @@ static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_set_lplu_state_pchlan - Set Low Power Link Up state
+ *  @hw: pointer to the HW structure
+ *  @active: true to enable LPLU, false to disable
+ *
+ *  Sets the LPLU state according to the active flag.  For PCH, if OEM write
+ *  bit are disabled in the NVM, writing the LPLU bits in the MAC will not set
+ *  the phy speed. This function will manually set the LPLU bit and restart
+ *  auto-neg as hw would do. D3 and D0 LPLU will call the same function
+ *  since it configures the same bit.
+ **/
+static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active)
+{
+	s32 ret_val = 0;
+	u16 oem_reg;
+
+	ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg);
+	if (ret_val)
+		goto out;
+
+	if (active)
+		oem_reg |= HV_OEM_BITS_LPLU;
+	else
+		oem_reg &= ~HV_OEM_BITS_LPLU;
+
+	oem_reg |= HV_OEM_BITS_RESTART_AN;
+	ret_val = e1e_wphy(hw, HV_OEM_BITS, oem_reg);
+
+out:
+	return ret_val;
+}
+
+/**
  *  e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state
  *  @hw: pointer to the HW structure
  *  @active: TRUE to enable LPLU, FALSE to disable
@@ -1314,12 +1392,11 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 	if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
 	    (words == 0)) {
 		hw_dbg(hw, "nvm parameter(s) out of bounds\n");
-		return -E1000_ERR_NVM;
+		ret_val = -E1000_ERR_NVM;
+		goto out;
 	}
 
-	ret_val = e1000_acquire_swflag_ich8lan(hw);
-	if (ret_val)
-		goto out;
+	nvm->ops.acquire_nvm(hw);
 
 	ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
 	if (ret_val) {
@@ -1345,7 +1422,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 		}
 	}
 
-	e1000_release_swflag_ich8lan(hw);
+	nvm->ops.release_nvm(hw);
 
 out:
 	if (ret_val)
@@ -1603,11 +1680,15 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 		return -E1000_ERR_NVM;
 	}
 
+	nvm->ops.acquire_nvm(hw);
+
 	for (i = 0; i < words; i++) {
 		dev_spec->shadow_ram[offset+i].modified = 1;
 		dev_spec->shadow_ram[offset+i].value = data[i];
 	}
 
+	nvm->ops.release_nvm(hw);
+
 	return 0;
 }
 
@@ -1637,9 +1718,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	if (nvm->type != e1000_nvm_flash_sw)
 		goto out;
 
-	ret_val = e1000_acquire_swflag_ich8lan(hw);
-	if (ret_val)
-		goto out;
+	nvm->ops.acquire_nvm(hw);
 
 	/*
 	 * We're writing to the opposite bank so if we're on bank 1,
@@ -1657,7 +1736,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 		old_bank_offset = 0;
 		ret_val = e1000_erase_flash_bank_ich8lan(hw, 1);
 		if (ret_val) {
-			e1000_release_swflag_ich8lan(hw);
+			nvm->ops.release_nvm(hw);
 			goto out;
 		}
 	} else {
@@ -1665,7 +1744,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 		new_bank_offset = 0;
 		ret_val = e1000_erase_flash_bank_ich8lan(hw, 0);
 		if (ret_val) {
-			e1000_release_swflag_ich8lan(hw);
+			nvm->ops.release_nvm(hw);
 			goto out;
 		}
 	}
@@ -1723,7 +1802,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	if (ret_val) {
 		/* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
 		hw_dbg(hw, "Flash commit failed.\n");
-		e1000_release_swflag_ich8lan(hw);
+		nvm->ops.release_nvm(hw);
 		goto out;
 	}
 
@@ -1736,7 +1815,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD;
 	ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data);
 	if (ret_val) {
-		e1000_release_swflag_ich8lan(hw);
+		nvm->ops.release_nvm(hw);
 		goto out;
 	}
 	data &= 0xBFFF;
@@ -1744,7 +1823,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 						       act_offset * 2 + 1,
 						       (u8)(data >> 8));
 	if (ret_val) {
-		e1000_release_swflag_ich8lan(hw);
+		nvm->ops.release_nvm(hw);
 		goto out;
 	}
 
@@ -1757,7 +1836,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1;
 	ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0);
 	if (ret_val) {
-		e1000_release_swflag_ich8lan(hw);
+		nvm->ops.release_nvm(hw);
 		goto out;
 	}
 
@@ -1767,7 +1846,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 		dev_spec->shadow_ram[i].value = 0xFFFF;
 	}
 
-	e1000_release_swflag_ich8lan(hw);
+	nvm->ops.release_nvm(hw);
 
 	/*
 	 * Reload the EEPROM, or else modifications will not appear
@@ -1831,14 +1910,12 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
  **/
 void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw)
 {
+	struct e1000_nvm_info *nvm = &hw->nvm;
 	union ich8_flash_protected_range pr0;
 	union ich8_hws_flash_status hsfsts;
 	u32 gfpreg;
-	s32 ret_val;
 
-	ret_val = e1000_acquire_swflag_ich8lan(hw);
-	if (ret_val)
-		return;
+	nvm->ops.acquire_nvm(hw);
 
 	gfpreg = er32flash(ICH_FLASH_GFPREG);
 
@@ -1859,7 +1936,7 @@ void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw)
 	hsfsts.hsf_status.flockdn = true;
 	ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval);
 
-	e1000_release_swflag_ich8lan(hw);
+	nvm->ops.release_nvm(hw);
 }
 
 /**
@@ -2229,6 +2306,7 @@ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
  **/
 static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 {
+	u16 reg;
 	u32 ctrl, icr, kab;
 	s32 ret_val;
 
@@ -2304,6 +2382,9 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 			hw_dbg(hw, "Auto Read Done did not complete\n");
 		}
 	}
+	/* Dummy read to clear the phy wakeup bit after lcd reset */
+	if (hw->mac.type == e1000_pchlan)
+		e1e_rphy(hw, BM_WUC, &reg);
 
 	/*
 	 * For PCH, this write will make sure that any noise
@@ -2843,9 +2924,8 @@ void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
 		            E1000_PHY_CTRL_GBE_DISABLE;
 		ew32(PHY_CTRL, phy_ctrl);
 
-		/* Workaround SWFLAG unexpectedly set during S0->Sx */
 		if (hw->mac.type == e1000_pchlan)
-			udelay(500);
+			e1000_phy_hw_reset_ich8lan(hw);
 	default:
 		break;
 	}
@@ -3113,9 +3193,9 @@ static struct e1000_phy_operations ich8_phy_ops = {
 };
 
 static struct e1000_nvm_operations ich8_nvm_ops = {
-	.acquire_nvm		= e1000_acquire_swflag_ich8lan,
+	.acquire_nvm		= e1000_acquire_nvm_ich8lan,
 	.read_nvm	 	= e1000_read_nvm_ich8lan,
-	.release_nvm		= e1000_release_swflag_ich8lan,
+	.release_nvm		= e1000_release_nvm_ich8lan,
 	.update_nvm		= e1000_update_nvm_checksum_ich8lan,
 	.valid_led_default	= e1000_valid_led_default_ich8lan,
 	.validate_nvm		= e1000_validate_nvm_checksum_ich8lan,
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 994401fd0664..f9d33ab05e97 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -164,16 +164,25 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw)
 		 * MDIC mode. No harm in trying again in this case since
 		 * the PHY ID is unknown at this point anyway
 		 */
+		ret_val = phy->ops.acquire_phy(hw);
+		if (ret_val)
+			goto out;
 		ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
 		if (ret_val)
 			goto out;
+		phy->ops.release_phy(hw);
 
 		retry_count++;
 	}
 out:
 	/* Revert to MDIO fast mode, if applicable */
-	if (retry_count)
+	if (retry_count) {
+		ret_val = phy->ops.acquire_phy(hw);
+		if (ret_val)
+			return ret_val;
 		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+		phy->ops.release_phy(hw);
+	}
 
 	return ret_val;
 }
@@ -354,94 +363,173 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
 }
 
 /**
- *  e1000e_read_phy_reg_igp - Read igp PHY register
+ *  __e1000e_read_phy_reg_igp - Read igp PHY register
  *  @hw: pointer to the HW structure
  *  @offset: register offset to be read
  *  @data: pointer to the read data
+ *  @locked: semaphore has already been acquired or not
  *
  *  Acquires semaphore, if necessary, then reads the PHY register at offset
- *  and storing the retrieved information in data.  Release any acquired
+ *  and stores the retrieved information in data.  Release any acquired
  *  semaphores before exiting.
  **/
-s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
+                                    bool locked)
 {
-	s32 ret_val;
+	s32 ret_val = 0;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
-	if (ret_val)
-		return ret_val;
+	if (!locked) {
+		if (!(hw->phy.ops.acquire_phy))
+			goto out;
+
+		ret_val = hw->phy.ops.acquire_phy(hw);
+		if (ret_val)
+			goto out;
+	}
 
 	if (offset > MAX_PHY_MULTI_PAGE_REG) {
 		ret_val = e1000e_write_phy_reg_mdic(hw,
 						    IGP01E1000_PHY_PAGE_SELECT,
 						    (u16)offset);
-		if (ret_val) {
-			hw->phy.ops.release_phy(hw);
-			return ret_val;
-		}
+		if (ret_val)
+			goto release;
 	}
 
 	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
-					   data);
-
-	hw->phy.ops.release_phy(hw);
+	                                  data);
 
+release:
+	if (!locked)
+		hw->phy.ops.release_phy(hw);
+out:
 	return ret_val;
 }
 
 /**
+ *  e1000e_read_phy_reg_igp - Read igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore then reads the PHY register at offset and stores the
+ *  retrieved information in data.
+ *  Release the acquired semaphore before exiting.
+ **/
+s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	return __e1000e_read_phy_reg_igp(hw, offset, data, false);
+}
+
+/**
+ *  e1000e_read_phy_reg_igp_locked - Read igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the PHY register at offset and stores the retrieved information
+ *  in data.  Assumes semaphore already acquired.
+ **/
+s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	return __e1000e_read_phy_reg_igp(hw, offset, data, true);
+}
+
+/**
  *  e1000e_write_phy_reg_igp - Write igp PHY register
  *  @hw: pointer to the HW structure
  *  @offset: register offset to write to
  *  @data: data to write at register offset
+ *  @locked: semaphore has already been acquired or not
  *
  *  Acquires semaphore, if necessary, then writes the data to PHY register
  *  at the offset.  Release any acquired semaphores before exiting.
  **/
-s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
+static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
+                                     bool locked)
 {
-	s32 ret_val;
+	s32 ret_val = 0;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
-	if (ret_val)
-		return ret_val;
+	if (!locked) {
+		if (!(hw->phy.ops.acquire_phy))
+			goto out;
+
+		ret_val = hw->phy.ops.acquire_phy(hw);
+		if (ret_val)
+			goto out;
+	}
 
 	if (offset > MAX_PHY_MULTI_PAGE_REG) {
 		ret_val = e1000e_write_phy_reg_mdic(hw,
 						    IGP01E1000_PHY_PAGE_SELECT,
 						    (u16)offset);
-		if (ret_val) {
-			hw->phy.ops.release_phy(hw);
-			return ret_val;
-		}
+		if (ret_val)
+			goto release;
 	}
 
 	ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
 					    data);
 
-	hw->phy.ops.release_phy(hw);
+release:
+	if (!locked)
+		hw->phy.ops.release_phy(hw);
 
+out:
 	return ret_val;
 }
 
 /**
- *  e1000e_read_kmrn_reg - Read kumeran register
+ *  e1000e_write_phy_reg_igp - Write igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	return __e1000e_write_phy_reg_igp(hw, offset, data, false);
+}
+
+/**
+ *  e1000e_write_phy_reg_igp_locked - Write igp PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes the data to PHY register at the offset.
+ *  Assumes semaphore already acquired.
+ **/
+s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	return __e1000e_write_phy_reg_igp(hw, offset, data, true);
+}
+
+/**
+ *  __e1000_read_kmrn_reg - Read kumeran register
  *  @hw: pointer to the HW structure
  *  @offset: register offset to be read
  *  @data: pointer to the read data
+ *  @locked: semaphore has already been acquired or not
  *
  *  Acquires semaphore, if necessary.  Then reads the PHY register at offset
  *  using the kumeran interface.  The information retrieved is stored in data.
  *  Release any acquired semaphores before exiting.
  **/
-s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset,