Merge branch 'dynamic_sg' into rdma.git for-next

From Maor Gottlieb says:

====================
This series extends __sg_alloc_table_from_pages to allow chaining of new
pages to an already initialized SG table.

This allows for drivers to utilize the optimization of merging contiguous
pages without a need to pre allocate all the pages and hold them in a very
large temporary buffer prior to the call to SG table initialization.

The last patch changes the Infiniband core to use the new API. It removes
duplicate functionality from the code and benefits from the optimization
of allocating dynamic SG table from pages.

In huge pages system of 2MB page size, without this change, the SG table
would contain x512 SG entries.
====================

* branch 'dynamic_sg':
  RDMA/umem: Move to allocate SG table from pages
  lib/scatterlist: Add support in dynamic allocation of SG table from pages
  tools/testing/scatterlist: Show errors in human readable form
  tools/testing/scatterlist: Rejuvenate bit-rotten test

87 files changed, 1052 insertions, 547 deletions

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 8f1d15ea15d9..f5779e152377 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -932,11 +932,19 @@ static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
 
 	if (cpu_port) {
+		if (!p->interface && dev->compat_interface) {
+			dev_warn(dev->dev,
+				 "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
+				 "Please update your device tree.\n",
+				 port);
+			p->interface = dev->compat_interface;
+		}
+
 		/* Configure MII interface for proper network communication. */
 		ksz_read8(dev, REG_PORT_5_CTRL_6, &data8);
 		data8 &= ~PORT_INTERFACE_TYPE;
 		data8 &= ~PORT_GMII_1GPS_MODE;
-		switch (dev->interface) {
+		switch (p->interface) {
 		case PHY_INTERFACE_MODE_MII:
 			p->phydev.speed = SPEED_100;
 			break;
@@ -952,11 +960,11 @@ static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 		default:
 			data8 &= ~PORT_RGMII_ID_IN_ENABLE;
 			data8 &= ~PORT_RGMII_ID_OUT_ENABLE;
-			if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-			    dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+			if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+			    p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
 				data8 |= PORT_RGMII_ID_IN_ENABLE;
-			if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-			    dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+			if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+			    p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
 				data8 |= PORT_RGMII_ID_OUT_ENABLE;
 			data8 |= PORT_GMII_1GPS_MODE;
 			data8 |= PORT_INTERFACE_RGMII;
@@ -1252,7 +1260,7 @@ static int ksz8795_switch_init(struct ksz_device *dev)
 	}
 
 	/* set the real number of ports */
-	dev->ds->num_ports = dev->port_cnt;
+	dev->ds->num_ports = dev->port_cnt + 1;
 
 	return 0;
 }
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 3cb22d149813..2f5506ac7d19 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1208,7 +1208,7 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 
 		/* configure MAC to 1G & RGMII mode */
 		ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
-		switch (dev->interface) {
+		switch (p->interface) {
 		case PHY_INTERFACE_MODE_MII:
 			ksz9477_set_xmii(dev, 0, &data8);
 			ksz9477_set_gbit(dev, false, &data8);
@@ -1229,11 +1229,11 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 			ksz9477_set_gbit(dev, true, &data8);
 			data8 &= ~PORT_RGMII_ID_IG_ENABLE;
 			data8 &= ~PORT_RGMII_ID_EG_ENABLE;
-			if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-			    dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+			if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+			    p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
 				data8 |= PORT_RGMII_ID_IG_ENABLE;
-			if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-			    dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+			if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+			    p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
 				data8 |= PORT_RGMII_ID_EG_ENABLE;
 			p->phydev.speed = SPEED_1000;
 			break;
@@ -1269,23 +1269,32 @@ static void ksz9477_config_cpu_port(struct dsa_switch *ds)
 			dev->cpu_port = i;
 			dev->host_mask = (1 << dev->cpu_port);
 			dev->port_mask |= dev->host_mask;
+			p = &dev->ports[i];
 
 			/* Read from XMII register to determine host port
 			 * interface.  If set specifically in device tree
 			 * note the difference to help debugging.
 			 */
 			interface = ksz9477_get_interface(dev, i);
-			if (!dev->interface)
-				dev->interface = interface;
-			if (interface && interface != dev->interface)
+			if (!p->interface) {
+				if (dev->compat_interface) {
+					dev_warn(dev->dev,
+						 "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
+						 "Please update your device tree.\n",
+						 i);
+					p->interface = dev->compat_interface;
+				} else {
+					p->interface = interface;
+				}
+			}
+			if (interface && interface != p->interface)
 				dev_info(dev->dev,
 					 "use %s instead of %s\n",
-					  phy_modes(dev->interface),
+					  phy_modes(p->interface),
 					  phy_modes(interface));
 
 			/* enable cpu port */
 			ksz9477_port_setup(dev, i, true);
-			p = &dev->ports[dev->cpu_port];
 			p->vid_member = dev->port_mask;
 			p->on = 1;
 		}
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 8d53b12d40a8..8e755b50c9c1 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -388,6 +388,8 @@ int ksz_switch_register(struct ksz_device *dev,
 			const struct ksz_dev_ops *ops)
 {
 	phy_interface_t interface;
+	struct device_node *port;
+	unsigned int port_num;
 	int ret;
 
 	if (dev->pdata)
@@ -421,10 +423,19 @@ int ksz_switch_register(struct ksz_device *dev,
 	/* Host port interface will be self detected, or specifically set in
 	 * device tree.
 	 */
+	for (port_num = 0; port_num < dev->port_cnt; ++port_num)
+		dev->ports[port_num].interface = PHY_INTERFACE_MODE_NA;
 	if (dev->dev->of_node) {
 		ret = of_get_phy_mode(dev->dev->of_node, &interface);
 		if (ret == 0)
-			dev->interface = interface;
+			dev->compat_interface = interface;
+		for_each_available_child_of_node(dev->dev->of_node, port) {
+			if (of_property_read_u32(port, "reg", &port_num))
+				continue;
+			if (port_num >= dev->port_cnt)
+				return -EINVAL;
+			of_get_phy_mode(port, &dev->ports[port_num].interface);
+		}
 		dev->synclko_125 = of_property_read_bool(dev->dev->of_node,
 							 "microchip,synclko-125");
 	}
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 206838160f49..cf866e48ff66 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -39,6 +39,7 @@ struct ksz_port {
 	u32 freeze:1;			/* MIB counter freeze is enabled */
 
 	struct ksz_port_mib mib;
+	phy_interface_t interface;
 };
 
 struct ksz_device {
@@ -72,7 +73,7 @@ struct ksz_device {
 	int mib_cnt;
 	int mib_port_cnt;
 	int last_port;			/* ports after that not used */
-	phy_interface_t interface;
+	phy_interface_t compat_interface;
 	u32 regs_size;
 	bool phy_errata_9477;
 	bool synclko_125;
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index 04bfa6e465ff..01427cd08448 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -585,7 +585,10 @@ static int felix_setup(struct dsa_switch *ds)
 	if (err)
 		return err;
 
-	ocelot_init(ocelot);
+	err = ocelot_init(ocelot);
+	if (err)
+		return err;
+
 	if (ocelot->ptp) {
 		err = ocelot_init_timestamp(ocelot, &ocelot_ptp_clock_info);
 		if (err) {
@@ -640,10 +643,13 @@ static void felix_teardown(struct dsa_switch *ds)
 {
 	struct ocelot *ocelot = ds->priv;
 	struct felix *felix = ocelot_to_felix(ocelot);
+	int port;
 
 	if (felix->info->mdio_bus_free)
 		felix->info->mdio_bus_free(ocelot);
 
+	for (port = 0; port < ocelot->num_phys_ports; port++)
+		ocelot_deinit_port(ocelot, port);
 	ocelot_deinit_timestamp(ocelot);
 	/* stop workqueue thread */
 	ocelot_deinit(ocelot);
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 9b720c8ddfc3..6855c94256f8 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -645,17 +645,17 @@ static struct vcap_field vsc9959_vcap_is2_keys[] = {
 	[VCAP_IS2_HK_DIP_EQ_SIP]		= {118,   1},
 	/* IP4_TCP_UDP (TYPE=100) */
 	[VCAP_IS2_HK_TCP]			= {119,   1},
-	[VCAP_IS2_HK_L4_SPORT]			= {120,  16},
-	[VCAP_IS2_HK_L4_DPORT]			= {136,  16},
+	[VCAP_IS2_HK_L4_DPORT]			= {120,  16},
+	[VCAP_IS2_HK_L4_SPORT]			= {136,  16},
 	[VCAP_IS2_HK_L4_RNG]			= {152,   8},
 	[VCAP_IS2_HK_L4_SPORT_EQ_DPORT]		= {160,   1},
 	[VCAP_IS2_HK_L4_SEQUENCE_EQ0]		= {161,   1},
-	[VCAP_IS2_HK_L4_URG]			= {162,   1},
-	[VCAP_IS2_HK_L4_ACK]			= {163,   1},
-	[VCAP_IS2_HK_L4_PSH]			= {164,   1},
-	[VCAP_IS2_HK_L4_RST]			= {165,   1},
-	[VCAP_IS2_HK_L4_SYN]			= {166,   1},
-	[VCAP_IS2_HK_L4_FIN]			= {167,   1},
+	[VCAP_IS2_HK_L4_FIN]			= {162,   1},
+	[VCAP_IS2_HK_L4_SYN]			= {163,   1},
+	[VCAP_IS2_HK_L4_RST]			= {164,   1},
+	[VCAP_IS2_HK_L4_PSH]			= {165,   1},
+	[VCAP_IS2_HK_L4_ACK]			= {166,   1},
+	[VCAP_IS2_HK_L4_URG]			= {167,   1},
 	[VCAP_IS2_HK_L4_1588_DOM]		= {168,   8},
 	[VCAP_IS2_HK_L4_1588_VER]		= {176,   4},
 	/* IP4_OTHER (TYPE=101) */
diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c
index 625b1891d955..29df0797ecf5 100644
--- a/drivers/net/dsa/ocelot/seville_vsc9953.c
+++ b/drivers/net/dsa/ocelot/seville_vsc9953.c
@@ -659,17 +659,17 @@ static struct vcap_field vsc9953_vcap_is2_keys[] = {
 	[VCAP_IS2_HK_DIP_EQ_SIP]		= {122,   1},
 	/* IP4_TCP_UDP (TYPE=100) */
 	[VCAP_IS2_HK_TCP]			= {123,   1},
-	[VCAP_IS2_HK_L4_SPORT]			= {124,  16},
-	[VCAP_IS2_HK_L4_DPORT]			= {140,  16},
+	[VCAP_IS2_HK_L4_DPORT]			= {124,  16},
+	[VCAP_IS2_HK_L4_SPORT]			= {140,  16},
 	[VCAP_IS2_HK_L4_RNG]			= {156,   8},
 	[VCAP_IS2_HK_L4_SPORT_EQ_DPORT]		= {164,   1},
 	[VCAP_IS2_HK_L4_SEQUENCE_EQ0]		= {165,   1},
-	[VCAP_IS2_HK_L4_URG]			= {166,   1},
-	[VCAP_IS2_HK_L4_ACK]			= {167,   1},
-	[VCAP_IS2_HK_L4_PSH]			= {168,   1},
-	[VCAP_IS2_HK_L4_RST]			= {169,   1},
-	[VCAP_IS2_HK_L4_SYN]			= {170,   1},
-	[VCAP_IS2_HK_L4_FIN]			= {171,   1},
+	[VCAP_IS2_HK_L4_FIN]			= {166,   1},
+	[VCAP_IS2_HK_L4_SYN]			= {167,   1},
+	[VCAP_IS2_HK_L4_RST]			= {168,   1},
+	[VCAP_IS2_HK_L4_PSH]			= {169,   1},
+	[VCAP_IS2_HK_L4_ACK]			= {170,   1},
+	[VCAP_IS2_HK_L4_URG]			= {171,   1},
 	/* IP4_OTHER (TYPE=101) */
 	[VCAP_IS2_HK_IP4_L3_PROTO]		= {123,   8},
 	[VCAP_IS2_HK_L3_PAYLOAD]		= {131,  56},
@@ -1008,7 +1008,7 @@ static const struct felix_info seville_info_vsc9953 = {
 	.vcap_is2_keys		= vsc9953_vcap_is2_keys,
 	.vcap_is2_actions	= vsc9953_vcap_is2_actions,
 	.vcap			= vsc9953_vcap_props,
-	.shared_queue_sz	= 128 * 1024,
+	.shared_queue_sz	= 2048 * 1024,
 	.num_mact_rows		= 2048,
 	.num_ports		= 10,
 	.mdio_bus_alloc		= vsc9953_mdio_bus_alloc,
diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
index 8f40fbf70a82..a8c5a934c3d3 100644
--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -452,13 +452,19 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port,
 				return ret;
 
 			if (vid == vlanmc.vid) {
-				/* clear VLAN member configurations */
-				vlanmc.vid = 0;
-				vlanmc.priority = 0;
-				vlanmc.member = 0;
-				vlanmc.untag = 0;
-				vlanmc.fid = 0;
-
+				/* Remove this port from the VLAN */
+				vlanmc.member &= ~BIT(port);
+				vlanmc.untag &= ~BIT(port);
+				/*
+				 * If no ports are members of this VLAN
+				 * anymore then clear the whole member
+				 * config so it can be reused.
+				 */
+				if (!vlanmc.member && vlanmc.untag) {
+					vlanmc.vid = 0;
+					vlanmc.priority = 0;
+					vlanmc.fid = 0;
+				}
 				ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
 				if (ret) {
 					dev_err(smi->dev,
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index b167066af450..7b7e8b7883c8 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/