diff options
author | Jan Ceuleers <jan.ceuleers@computer.org> | 2012-06-05 03:42:12 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2012-06-05 15:38:40 -0700 |
commit | 0977f817df4d0f629952b4c31d650640188b4e45 (patch) | |
tree | 7120da68c030d306300ea9bfb42d6ec772a97a62 /drivers/net | |
parent | 2281a0f3346ae891e3c2216ad05359e0b7934bf0 (diff) |
gianfar: comment cleanup
Signed-off-by: Jan Ceuleers <jan.ceuleers@computer.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/ethernet/freescale/gianfar.c | 155 |
1 files changed, 83 insertions, 72 deletions
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 5ca7b9eaa84a..314456000335 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -1,5 +1,4 @@ -/* - * drivers/net/ethernet/freescale/gianfar.c +/* drivers/net/ethernet/freescale/gianfar.c * * Gianfar Ethernet Driver * This driver is designed for the non-CPM ethernet controllers @@ -405,7 +404,8 @@ static void gfar_init_mac(struct net_device *ndev) gfar_write(®s->attreli, attrs); /* Start with defaults, and add stashing or locking - * depending on the approprate variables */ + * depending on the approprate variables + */ attrs = ATTR_INIT_SETTINGS; if (priv->bd_stash_en) @@ -652,7 +652,7 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev) priv->num_rx_queues = num_rx_qs; priv->num_grps = 0x0; - /* Init Rx queue filer rule set linked list*/ + /* Init Rx queue filer rule set linked list */ INIT_LIST_HEAD(&priv->rx_list.list); priv->rx_list.count = 0; mutex_init(&priv->rx_queue_access); @@ -960,7 +960,8 @@ static void gfar_detect_errata(struct gfar_private *priv) } /* Set up the ethernet device structure, private data, - * and anything else we need before we start */ + * and anything else we need before we start + */ static int gfar_probe(struct platform_device *ofdev) { u32 tempval; @@ -991,8 +992,9 @@ static int gfar_probe(struct platform_device *ofdev) gfar_detect_errata(priv); - /* Stop the DMA engine now, in case it was running before */ - /* (The firmware could have used it, and left it running). */ + /* Stop the DMA engine now, in case it was running before + * (The firmware could have used it, and left it running). + */ gfar_halt(dev); /* Reset MAC layer */ @@ -1098,7 +1100,8 @@ static int gfar_probe(struct platform_device *ofdev) /* Need to reverse the bit maps as bit_map's MSB is q0 * but, for_each_set_bit parses from right to left, which - * basically reverses the queue numbers */ + * basically reverses the queue numbers + */ for (i = 0; i< priv->num_grps; i++) { priv->gfargrp[i].tx_bit_map = reverse_bitmap( priv->gfargrp[i].tx_bit_map, MAX_TX_QS); @@ -1107,7 +1110,8 @@ static int gfar_probe(struct platform_device *ofdev) } /* Calculate RSTAT, TSTAT, RQUEUE and TQUEUE values, - * also assign queues to groups */ + * also assign queues to groups + */ for (grp_idx = 0; grp_idx < priv->num_grps; grp_idx++) { priv->gfargrp[grp_idx].num_rx_queues = 0x0; for_each_set_bit(i, &priv->gfargrp[grp_idx].rx_bit_map, @@ -1149,7 +1153,7 @@ static int gfar_probe(struct platform_device *ofdev) priv->rx_queue[i]->rxic = DEFAULT_RXIC; } - /* always enable rx filer*/ + /* always enable rx filer */ priv->rx_filer_enable = 1; /* Enable most messages by default */ priv->msg_enable = (NETIF_MSG_IFUP << 1 ) - 1; @@ -1189,8 +1193,9 @@ static int gfar_probe(struct platform_device *ofdev) /* Print out the device info */ netdev_info(dev, "mac: %pM\n", dev->dev_addr); - /* Even more device info helps when determining which kernel */ - /* provided which set of benchmarks. */ + /* Even more device info helps when determining which kernel + * provided which set of benchmarks. + */ netdev_info(dev, "Running with NAPI enabled\n"); for (i = 0; i < priv->num_rx_queues; i++) netdev_info(dev, "RX BD ring size for Q[%d]: %d\n", @@ -1398,8 +1403,7 @@ static phy_interface_t gfar_get_interface(struct net_device *dev) else { phy_interface_t interface = priv->interface; - /* - * This isn't autodetected right now, so it must + /* This isn't autodetected right now, so it must * be set by the device tree or platform code. */ if (interface == PHY_INTERFACE_MODE_RGMII_ID) @@ -1453,8 +1457,7 @@ static int init_phy(struct net_device *dev) return 0; } -/* - * Initialize TBI PHY interface for communicating with the +/* Initialize TBI PHY interface for communicating with the * SERDES lynx PHY on the chip. We communicate with this PHY * through the MDIO bus on each controller, treating it as a * "normal" PHY at the address found in the TBIPA register. We assume @@ -1479,8 +1482,7 @@ static void gfar_configure_serdes(struct net_device *dev) return; } - /* - * If the link is already up, we must already be ok, and don't need to + /* If the link is already up, we must already be ok, and don't need to * configure and reset the TBI<->SerDes link. Maybe U-Boot configured * everything for us? Resetting it takes the link down and requires * several seconds for it to come back. @@ -1554,15 +1556,13 @@ static int __gfar_is_rx_idle(struct gfar_private *priv) { u32 res; - /* - * Normaly TSEC should not hang on GRS commands, so we should + /* Normaly TSEC should not hang on GRS commands, so we should * actually wait for IEVENT_GRSC flag. */ if (likely(!gfar_has_errata(priv, GFAR_ERRATA_A002))) return 0; - /* - * Read the eTSEC register at offset 0xD1C. If bits 7-14 are + /* Read the eTSEC register at offset 0xD1C. If bits 7-14 are * the same as bits 23-30, the eTSEC Rx is assumed to be idle * and the Rx can be safely reset. */ @@ -1718,7 +1718,8 @@ static void free_skb_rx_queue(struct gfar_priv_rx_q *rx_queue) } /* If there are any tx skbs or rx skbs still around, free them. - * Then free tx_skbuff and rx_skbuff */ + * Then free tx_skbuff and rx_skbuff + */ static void free_skb_resources(struct gfar_private *priv) { struct gfar_priv_tx_q *tx_queue = NULL; @@ -1827,10 +1828,12 @@ static int register_grp_irqs(struct gfar_priv_grp *grp) int err; /* If the device has multiple interrupts, register for - * them. Otherwise, only register for the one */ + * them. Otherwise, only register for the one + */ if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { /* Install our interrupt handlers for Error, - * Transmit, and Receive */ + * Transmit, and Receive + */ if ((err = request_irq(grp->interruptError, gfar_error, 0, grp->int_name_er,grp)) < 0) { netif_err(priv, intr, dev, "Can't get IRQ %d\n", @@ -1914,8 +1917,9 @@ irq_fail: return err; } -/* Called when something needs to use the ethernet device */ -/* Returns 0 for success. */ +/* Called when something needs to use the ethernet device + * Returns 0 for success. + */ static int gfar_enet_open(struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); @@ -1970,8 +1974,9 @@ static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb, */ flags = TXFCB_DEFAULT; - /* Tell the controller what the protocol is */ - /* And provide the already calculated phcs */ + /* Tell the controller what the protocol is + * And provide the already calculated phcs + */ if (ip_hdr(skb)->protocol == IPPROTO_UDP) { flags |= TXFCB_UDP; fcb->phcs = udp_hdr(skb)->check; @@ -1981,7 +1986,8 @@ static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb, /* l3os is the distance between the start of the * frame (skb->data) and the start of the IP hdr. * l4os is the distance between the start of the - * l3 hdr and the l4 hdr */ + * l3 hdr and the l4 hdr + */ fcb->l3os = (u16)(skb_network_offset(skb) - fcb_length); fcb->l4os = skb_network_header_len(skb); @@ -2008,8 +2014,9 @@ static inline struct txbd8 *next_txbd(struct txbd8 *bdp, struct txbd8 *base, return skip_txbd(bdp, 1, base, ring_size); } -/* This is called by the kernel when a frame is ready for transmission. */ -/* It is pointed to by the dev->hard_start_xmit function pointer */ +/* This is called by the kernel when a frame is ready for transmission. + * It is pointed to by the dev->hard_start_xmit function pointer + */ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); @@ -2024,8 +2031,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) unsigned long flags; unsigned int nr_frags, nr_txbds, length, fcb_length = GMAC_FCB_LEN; - /* - * TOE=1 frames larger than 2500 bytes may see excess delays + /* TOE=1 frames larger than 2500 bytes may see excess delays * before start of transmission. */ if (unlikely(gfar_has_errata(priv, GFAR_ERRATA_76) && @@ -2177,8 +2183,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) txbdp_start->bufPtr = dma_map_single(&priv->ofdev->dev, skb->data, skb_headlen(skb), DMA_TO_DEVICE); - /* - * If time stamping is requested one additional TxBD must be set up. The + /* If time stamping is requested one additional TxBD must be set up. The * first TxBD points to the FCB and must have a data length of * GMAC_FCB_LEN. The second TxBD points to the actual frame data with * the full frame length. @@ -2194,8 +2199,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) netdev_tx_sent_queue(txq, skb->len); - /* - * We can work in parallel with gfar_clean_tx_ring(), except + /* We can work in parallel with gfar_clean_tx_ring(), except * when modifying num_txbdfree. Note that we didn't grab the lock * when we were reading the num_txbdfree and checking for available * space, that's because outside of this function it can only grow, @@ -2208,8 +2212,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) */ spin_lock_irqsave(&tx_queue->txlock, flags); - /* - * The powerpc-specific eieio() is used, as wmb() has too strong + /* The powerpc-specific eieio() is used, as wmb() has too strong * semantics (it requires synchronization between cacheable and * uncacheable mappings, which eieio doesn't provide and which we * don't need), thus requiring a more expensive sync instruction. At @@ -2225,7 +2228,8 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb; /* Update the current skb pointer to the next entry we will use - * (wrapping if necessary) */ + * (wrapping if necessary) + */ tx_queue->skb_curtx = (tx_queue->skb_curtx + 1) & TX_RING_MOD_MASK(tx_queue->tx_ring_size); @@ -2235,7 +2239,8 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) tx_queue->num_txbdfree -= (nr_txbds); /* If the next BD still needs to be cleaned up, then the bds - are full. We need to tell the kernel to stop sending us stuff. */ + * are full. We need to tell the kernel to stop sending us stuff. + */ if (!tx_queue->num_txbdfree) { netif_tx_stop_queue(txq); @@ -2365,7 +2370,8 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu) INCREMENTAL_BUFFER_SIZE; /* Only stop and start the controller if it isn't already - * stopped, and we changed something */ + * stopped, and we changed something + */ if ((oldsize != tempsize) && (dev->flags & IFF_UP)) stop_gfar(dev); @@ -2378,7 +2384,8 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu) /* If the mtu is larger than the max size for standard * ethernet frames (ie, a jumbo frame), then set maccfg2 - * to allow huge frames, and to check the length */ + * to allow huge frames, and to check the length + */ tempval = gfar_read(®s->maccfg2); if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE || @@ -2464,8 +2471,7 @@ static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue) frags = skb_shinfo(skb)->nr_frags; - /* - * When time stamping, one additional TxBD must be freed. + /* When time stamping, one additional TxBD must be freed. * Also, we need to dma_unmap_single() the TxPAL. */ if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS)) @@ -2516,8 +2522,7 @@ static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue) bytes_sent += skb->len; - /* - * If there's room in the queue (limit it to rx_buffer_size) + /* If there's room in the queue (limit it to rx_buffer_size) * we add this skb back into the pool, if it's the right size */ if (skb_queue_len(&priv->rx_recycle) < rx_queue->rx_ring_size && @@ -2561,8 +2566,7 @@ static void gfar_schedule_cleanup(struct gfar_priv_grp *gfargrp) gfar_write(&gfargrp->regs->imask, IMASK_RTX_DISABLED); __napi_schedule(&gfargrp->napi); } else { - /* - * Clear IEVENT, so interrupts aren't called again + /* Clear IEVENT, so interrupts aren't called again * because of the packets that have already arrived. */ gfar_write(&gfargrp->regs->ievent, IEVENT_RTX_MASK); @@ -2622,8 +2626,7 @@ static inline void count_errors(unsigned short status, struct net_device *dev) struct net_device_stats *stats = &dev->stats; struct gfar_extra_stats *estats = &priv->extra_stats; - /* If the packet was truncated, none of the other errors - * matter */ + /* If the packet was truncated, none of the other errors matter */ if (status & RXBD_TRUNCATED) { stats->rx_length_errors++; @@ -2664,7 +2667,8 @@ static inline void gfar_rx_checksum(struct sk_buff *skb, struct rxfcb *fcb) { /* If valid headers were found, and valid sums * were verified, then we tell the kernel that no - * checksumming is necessary. Otherwise, it is */ + * checksumming is necessary. Otherwise, it is [FIXME] + */ if ((fcb->flags & RXFCB_CSUM_MASK) == (RXFCB_CIP | RXFCB_CTU)) skb->ip_summed = CHECKSUM_UNNECESSARY; else @@ -2672,8 +2676,7 @@ static inline void gfar_rx_checksum(struct sk_buff *skb, struct rxfcb *fcb) } -/* gfar_process_frame() -- handle one incoming packet if skb - * isn't NULL. */ +/* gfar_process_frame() -- handle one incoming packet if skb isn't NULL. */ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int amount_pull, struct napi_struct *napi) { @@ -2685,8 +2688,9 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, /* fcb is at the beginning if exists */ fcb = (struct rxfcb *)skb->data; - /* Remove the FCB from the skb */ - /* Remove the padded bytes, if there are any */ + /* Remove the FCB from the skb + * Remove the padded bytes, if there are any + */ if (amount_pull) { skb_record_rx_queue(skb, fcb->rq); skb_pull(skb, amount_pull); @@ -2709,8 +2713,7 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, /* Tell the skb what kind of packet this is */ skb->protocol = eth_type_trans(skb, dev); - /* - * There's need to check for NETIF_F_HW_VLAN_RX here. + /* There's need to check for NETIF_F_HW_VLAN_RX here. * Even if vlan rx accel is disabled, on some chips * RXFCB_VLN is pseudo randomly set. */ @@ -2831,7 +2834,8 @@ static int gfar_poll(struct napi_struct *napi, int budget) budget_per_queue = budget/num_queues; /* Clear IEVENT, so interrupts aren't called again - * because of the packets that have already arrived */ + * because of the packets that have already arrived + */ gfar_write(®s->ievent, IEVENT_RTX_MASK); while (num_queues && left_over_budget) { @@ -2869,8 +2873,9 @@ static int gfar_poll(struct napi_struct *napi, int budget) gfar_write(®s->imask, IMASK_DEFAULT); - /* If we are coalescing interrupts, update the timer */ - /* Otherwise, clear it */ + /* If we are coalescing interrupts, update the timer + * Otherwise, clear it + */ gfar_configure_coalescing(priv, gfargrp->rx_bit_map, gfargrp->tx_bit_map); } @@ -2879,8 +2884,7 @@ static int gfar_poll(struct napi_struct *napi, int budget) } #ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling 'interrupt' - used by things like netconsole to send skbs +/* Polling 'interrupt' - used by things like netconsole to send skbs * without having to re-enable interrupts. It's not called while * the interrupt routine is executing. */ @@ -2957,7 +2961,8 @@ static void adjust_link(struct net_device *dev) u32 ecntrl = gfar_read(®s->ecntrl); /* Now we make sure that we can be in full duplex mode. - * If not, we operate in half-duplex mode. */ + * If not, we operate in half-duplex mode. + */ if (phydev->duplex != priv->oldduplex) { new_state = 1; if (!(phydev->duplex)) @@ -2983,7 +2988,8 @@ static void adjust_link(struct net_device *dev) ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII); /* Reduced mode distinguishes - * between 10 and 100 */ + * between 10 and 100 + */ if (phydev->speed == SPEED_100) ecntrl |= ECNTRL_R100; else @@ -3022,7 +3028,8 @@ static void adjust_link(struct net_device *dev) /* Update the hash table based on the current list of multicast * addresses we subscribe to. Also, change the promiscuity of * the device based on the flags (this function is called - * whenever dev->flags is changed */ + * whenever dev->flags is changed + */ static void gfar_set_multi(struct net_device *dev) { struct netdev_hw_addr *ha; @@ -3084,7 +3091,8 @@ static void gfar_set_multi(struct net_device *dev) /* If we have extended hash tables, we need to * clear the exact match registers to prepare for - * setting them */ + * setting them + */ if (priv->extended_hash) { em_num = GFAR_EM_NUM + 1; gfar_clear_exact_match(dev); @@ -3110,7 +3118,8 @@ static void gfar_set_multi(struct net_device *dev) /* Clears each of the exact match registers to zero, so they - * don't interfere with normal reception */ + * don't interfere with normal reception + */ static void gfar_clear_exact_match(struct net_device *dev) { int idx; @@ -3132,7 +3141,8 @@ static void gfar_clear_exact_match(struct net_device *dev) * hash index which gaddr register to use, and the 5 other bits * indicate which bit (assuming an IBM numbering scheme, which * for PowerPC (tm) is usually the case) in the register holds - * the entry. */ + * the entry. + */ static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr) { u32 tempval; @@ -3164,8 +3174,9 @@ static void gfar_set_mac_for_addr(struct net_device *dev, int num, macptr += num*2; - /* Now copy it into the mac registers backwards, cuz */ - /* little endian is silly */ + /* Now copy it into the mac registers backwards, cuz + * little endian is silly + */ for (idx = 0; idx < ETH_ALEN; idx++) tmpbuf[ETH_ALEN - 1 - idx] = addr[idx]; |