Merge remote-tracking branch 'mac80211-next/master' into next

99 files changed, 1620 insertions, 691 deletions

diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index d0c97c220026..8ae838d96a9e 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -1237,6 +1237,7 @@ struct airo_info {
 
 	int			wep_capable;
 	int			max_wep_idx;
+	int			last_auth;
 
 	/* WPA-related stuff */
 	unsigned int bssListFirst;
@@ -3266,6 +3267,7 @@ static void airo_handle_link(struct airo_info *ai)
 			wake_up_interruptible(&ai->thr_wait);
 		} else
 			airo_send_event(ai->dev);
+		netif_carrier_on(ai->dev);
 	} else if (!scan_forceloss) {
 		if (auto_wep && !ai->expires) {
 			ai->expires = RUN_AT(3*HZ);
@@ -3276,6 +3278,9 @@ static void airo_handle_link(struct airo_info *ai)
 		eth_zero_addr(wrqu.ap_addr.sa_data);
 		wrqu.ap_addr.sa_family = ARPHRD_ETHER;
 		wireless_send_event(ai->dev, SIOCGIWAP, &wrqu, NULL);
+		netif_carrier_off(ai->dev);
+	} else {
+		netif_carrier_off(ai->dev);
 	}
 }
 
@@ -3612,6 +3617,7 @@ static void disable_MAC( struct airo_info *ai, int lock ) {
 		return;
 
 	if (test_bit(FLAG_ENABLED, &ai->flags)) {
+		netif_carrier_off(ai->dev);
 		memset(&cmd, 0, sizeof(cmd));
 		cmd.cmd = MAC_DISABLE; // disable in case already enabled
 		issuecommand(ai, &cmd, &rsp);
@@ -3786,6 +3792,16 @@ badrx:
 	}
 }
 
+static inline void set_auth_type(struct airo_info *local, int auth_type)
+{
+	local->config.authType = auth_type;
+	/* Cache the last auth type used (of AUTH_OPEN and AUTH_ENCRYPT).
+	 * Used by airo_set_auth()
+	 */
+	if (auth_type == AUTH_OPEN || auth_type == AUTH_ENCRYPT)
+		local->last_auth = auth_type;
+}
+
 static u16 setup_card(struct airo_info *ai, u8 *mac, int lock)
 {
 	Cmd cmd;
@@ -3862,7 +3878,7 @@ static u16 setup_card(struct airo_info *ai, u8 *mac, int lock)
 						"level scale");
 		}
 		ai->config.opmode = adhoc ? MODE_STA_IBSS : MODE_STA_ESS;
-		ai->config.authType = AUTH_OPEN;
+		set_auth_type(ai, AUTH_OPEN);
 		ai->config.modulation = MOD_CCK;
 
 		if (le16_to_cpu(cap_rid.len) >= sizeof(cap_rid) &&
@@ -4880,13 +4896,13 @@ static void proc_config_on_close(struct inode *inode, struct file *file)
 			line += 5;
 			switch( line[0] ) {
 			case 's':
-				ai->config.authType = AUTH_SHAREDKEY;
+				set_auth_type(ai, AUTH_SHAREDKEY);
 				break;
 			case 'e':
-				ai->config.authType = AUTH_ENCRYPT;
+				set_auth_type(ai, AUTH_ENCRYPT);
 				break;
 			default:
-				ai->config.authType = AUTH_OPEN;
+				set_auth_type(ai, AUTH_OPEN);
 				break;
 			}
 			set_bit (FLAG_COMMIT, &ai->flags);
@@ -6368,9 +6384,8 @@ static int airo_set_encode(struct net_device *dev,
 		 * should be enabled (user may turn it off later)
 		 * This is also how "iwconfig ethX key on" works */
 		if((index == current_index) && (key.len > 0) &&
-		   (local->config.authType == AUTH_OPEN)) {
-			local->config.authType = AUTH_ENCRYPT;
-		}
+		   (local->config.authType == AUTH_OPEN))
+			set_auth_type(local, AUTH_ENCRYPT);
 	} else {
 		/* Do we want to just set the transmit key index ? */
 		int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
@@ -6389,12 +6404,12 @@ static int airo_set_encode(struct net_device *dev,
 		}
 	}
 	/* Read the flags */
-	if(dwrq->flags & IW_ENCODE_DISABLED)
-		local->config.authType = AUTH_OPEN;	// disable encryption
+	if (dwrq->flags & IW_ENCODE_DISABLED)
+		set_auth_type(local, AUTH_OPEN);	/* disable encryption */
 	if(dwrq->flags & IW_ENCODE_RESTRICTED)
-		local->config.authType = AUTH_SHAREDKEY;	// Only Both
-	if(dwrq->flags & IW_ENCODE_OPEN)
-		local->config.authType = AUTH_ENCRYPT;	// Only Wep
+		set_auth_type(local, AUTH_SHAREDKEY);	/* Only Both */
+	if (dwrq->flags & IW_ENCODE_OPEN)
+		set_auth_type(local, AUTH_ENCRYPT);	/* Only Wep */
 	/* Commit the changes to flags if needed */
 	if (local->config.authType != currentAuthType)
 		set_bit (FLAG_COMMIT, &local->flags);
@@ -6549,12 +6564,12 @@ static int airo_set_encodeext(struct net_device *dev,
 	}
 
 	/* Read the flags */
-	if(encoding->flags & IW_ENCODE_DISABLED)
-		local->config.authType = AUTH_OPEN;	// disable encryption
+	if (encoding->flags & IW_ENCODE_DISABLED)
+		set_auth_type(local, AUTH_OPEN);	/* disable encryption */
 	if(encoding->flags & IW_ENCODE_RESTRICTED)
-		local->config.authType = AUTH_SHAREDKEY;	// Only Both
-	if(encoding->flags & IW_ENCODE_OPEN)
-		local->config.authType = AUTH_ENCRYPT;	// Only Wep
+		set_auth_type(local, AUTH_SHAREDKEY);	/* Only Both */
+	if (encoding->flags & IW_ENCODE_OPEN)
+		set_auth_type(local, AUTH_ENCRYPT);
 	/* Commit the changes to flags if needed */
 	if (local->config.authType != currentAuthType)
 		set_bit (FLAG_COMMIT, &local->flags);
@@ -6659,9 +6674,9 @@ static int airo_set_auth(struct net_device *dev,
 		if (param->value) {
 			/* Only change auth type if unencrypted */
 			if (currentAuthType == AUTH_OPEN)
-				local->config.authType = AUTH_ENCRYPT;
+				set_auth_type(local, AUTH_ENCRYPT);
 		} else {
-			local->config.authType = AUTH_OPEN;
+			set_auth_type(local, AUTH_OPEN);
 		}
 
 		/* Commit the changes to flags if needed */
@@ -6670,13 +6685,14 @@ static int airo_set_auth(struct net_device *dev,
 		break;
 
 	case IW_AUTH_80211_AUTH_ALG: {
-			/* FIXME: What about AUTH_OPEN?  This API seems to
-			 * disallow setting our auth to AUTH_OPEN.
-			 */
 			if (param->value & IW_AUTH_ALG_SHARED_KEY) {
-				local->config.authType = AUTH_SHAREDKEY;
+				set_auth_type(local, AUTH_SHAREDKEY);
 			} else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
-				local->config.authType = AUTH_ENCRYPT;
+				/* We don't know here if WEP open system or
+				 * unencrypted mode was requested - so use the
+				 * last mode (of these two) used last time
+				 */
+				set_auth_type(local, local->last_auth);
 			} else
 				return -EINVAL;
 
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index b87b98617073..879625adc63a 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -34,16 +34,19 @@ unsigned int ath10k_debug_mask;
 static unsigned int ath10k_cryptmode_param;
 static bool uart_print;
 static bool skip_otp;
+static bool rawmode;
 
 module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
 module_param_named(cryptmode, ath10k_cryptmode_param, uint, 0644);
 module_param(uart_print, bool, 0644);
 module_param(skip_otp, bool, 0644);
+module_param(rawmode, bool, 0644);
 
 MODULE_PARM_DESC(debug_mask, "Debugging mask");
 MODULE_PARM_DESC(uart_print, "Uart target debugging");
 MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode");
 MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software");
+MODULE_PARM_DESC(rawmode, "Use raw 802.11 frame datapath");
 
 static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 	{
@@ -54,6 +57,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.has_shifted_cc_wraparound = true,
 		.otp_exe_param = 0,
 		.channel_counters_freq_hz = 88000,
+		.max_probe_resp_desc_thres = 0,
 		.fw = {
 			.dir = QCA988X_HW_2_0_FW_DIR,
 			.fw = QCA988X_HW_2_0_FW_FILE,
@@ -70,6 +74,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.uart_pin = 6,
 		.otp_exe_param = 0,
 		.channel_counters_freq_hz = 88000,
+		.max_probe_resp_desc_thres = 0,
 		.fw = {
 			.dir = QCA6174_HW_2_1_FW_DIR,
 			.fw = QCA6174_HW_2_1_FW_FILE,
@@ -86,6 +91,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.uart_pin = 6,
 		.otp_exe_param = 0,
 		.channel_counters_freq_hz = 88000,
+		.max_probe_resp_desc_thres = 0,
 		.fw = {
 			.dir = QCA6174_HW_3_0_FW_DIR,
 			.fw = QCA6174_HW_3_0_FW_FILE,
@@ -102,6 +108,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.uart_pin = 6,
 		.otp_exe_param = 0,
 		.channel_counters_freq_hz = 88000,
+		.max_probe_resp_desc_thres = 0,
 		.fw = {
 			/* uses same binaries as hw3.0 */
 			.dir = QCA6174_HW_3_0_FW_DIR,
@@ -120,6 +127,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.otp_exe_param = 0x00000700,
 		.continuous_frag_desc = true,
 		.channel_counters_freq_hz = 150000,
+		.max_probe_resp_desc_thres = 24,
 		.fw = {
 			.dir = QCA99X0_HW_2_0_FW_DIR,
 			.fw = QCA99X0_HW_2_0_FW_FILE,
@@ -142,12 +150,17 @@ static const char *const ath10k_core_fw_feature_str[] = {
 	[ATH10K_FW_FEATURE_IGNORE_OTP_RESULT] = "ignore-otp",
 	[ATH10K_FW_FEATURE_NO_NWIFI_DECAP_4ADDR_PADDING] = "no-4addr-pad",
 	[ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT] = "skip-clock-init",
+	[ATH10K_FW_FEATURE_RAW_MODE_SUPPORT] = "raw-mode",
 };
 
 static unsigned int ath10k_core_get_fw_feature_str(char *buf,
 						   size_t buf_len,
 						   enum ath10k_fw_features feat)
 {
+	/* make sure that ath10k_core_fw_feature_str[] gets updated */
+	BUILD_BUG_ON(ARRAY_SIZE(ath10k_core_fw_feature_str) !=
+		     ATH10K_FW_FEATURE_COUNT);
+
 	if (feat >= ARRAY_SIZE(ath10k_core_fw_feature_str) ||
 	    WARN_ON(!ath10k_core_fw_feature_str[feat])) {
 		return scnprintf(buf, buf_len, "bit%d", feat);
@@ -1117,6 +1130,15 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
 	ar->htt.max_num_amsdu = ATH10K_HTT_MAX_NUM_AMSDU_DEFAULT;
 	ar->htt.max_num_ampdu = ATH10K_HTT_MAX_NUM_AMPDU_DEFAULT;
 
+	if (rawmode) {
+		if (!test_bit(ATH10K_FW_FEATURE_RAW_MODE_SUPPORT,
+			      ar->fw_features)) {
+			ath10k_err(ar, "rawmode = 1 requires support from firmware");
+			return -EINVAL;
+		}
+		set_bit(ATH10