rtlwifi: rtl8192ce: rtl8192cu: Fix most sparse warnings

Fix most sparse warnings in rtlwifi, rtl8192ce and rtl8192cu drivers.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 0 insertions, 69 deletions

diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
index 604540160a31..73ae8a431848 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
@@ -366,75 +366,6 @@ bool rtl92c_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
 	return true;
 }
 
-void rtl92c_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
-	struct rtl_phy *rtlphy = &(rtlpriv->phy);
-	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
-	u8 reg_bw_opmode;
-	u8 reg_prsr_rsc;
-
-	RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE,
-		 ("Switch to %s bandwidth\n",
-		  rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20 ?
-		  "20MHz" : "40MHz"))
-
-	if (is_hal_stop(rtlhal)) {
-		rtlphy->set_bwmode_inprogress = false;
-		return;
-	}
-
-	reg_bw_opmode = rtl_read_byte(rtlpriv, REG_BWOPMODE);
-	reg_prsr_rsc = rtl_read_byte(rtlpriv, REG_RRSR + 2);
-
-	switch (rtlphy->current_chan_bw) {
-	case HT_CHANNEL_WIDTH_20:
-		reg_bw_opmode |= BW_OPMODE_20MHZ;
-		rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode);
-		break;
-	case HT_CHANNEL_WIDTH_20_40:
-		reg_bw_opmode &= ~BW_OPMODE_20MHZ;
-		rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode);
-		reg_prsr_rsc =
-		    (reg_prsr_rsc & 0x90) | (mac->cur_40_prime_sc << 5);
-		rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
-		break;
-	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 ("unknown bandwidth: %#X\n", rtlphy->current_chan_bw));
-		break;
-	}
-
-	switch (rtlphy->current_chan_bw) {
-	case HT_CHANNEL_WIDTH_20:
-		rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x0);
-		rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x0);
-		rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10), 1);
-		break;
-	case HT_CHANNEL_WIDTH_20_40:
-		rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x1);
-		rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x1);
-
-		rtl_set_bbreg(hw, RCCK0_SYSTEM, BCCK_SIDEBAND,
-			      (mac->cur_40_prime_sc >> 1));
-		rtl_set_bbreg(hw, ROFDM1_LSTF, 0xC00, mac->cur_40_prime_sc);
-		rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10), 0);
-
-		rtl_set_bbreg(hw, 0x818, (BIT(26) | BIT(27)),
-			      (mac->cur_40_prime_sc ==
-			       HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
-		break;
-	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 ("unknown bandwidth: %#X\n", rtlphy->current_chan_bw));
-		break;
-	}
-	rtl92ce_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
-	rtlphy->set_bwmode_inprogress = false;
-	RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n"));
-}
-
 void _rtl92ce_phy_lc_calibrate(struct ieee80211_hw *hw, bool is2t)
 {
 	u8 tmpreg;