diff options
author | Wey-Yi Guy <wey-yi.w.guy@intel.com> | 2011-04-05 09:41:52 -0700 |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2011-04-07 15:51:35 -0400 |
commit | 4de10b188070b1b96743b1b912843af729ebe50f (patch) | |
tree | 91d3b33d7ce7eb98671b2bb9dd30d04da72a9f50 /drivers/net/wireless/iwlwifi/iwl-prph.h | |
parent | 7102762ef0ef330ab0601b6c3bc92bf9be5b1317 (diff) |
iwlagn: remove more 3945/4965 related defines
After driver split, remove unused #defines
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-prph.h')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-prph.h | 327 |
1 files changed, 0 insertions, 327 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index 81c464747f59..448b0eab54ac 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -98,142 +98,6 @@ #define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) /** - * BSM (Bootstrap State Machine) - * - * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program - * in special SRAM that does not power down when the embedded control - * processor is sleeping (e.g. for periodic power-saving shutdowns of radio). - * - * When powering back up after sleeps (or during initial uCode load), the BSM - * internally loads the short bootstrap program from the special SRAM into the - * embedded processor's instruction SRAM, and starts the processor so it runs - * the bootstrap program. - * - * This bootstrap program loads (via PCI busmaster DMA) instructions and data - * images for a uCode program from host DRAM locations. The host driver - * indicates DRAM locations and sizes for instruction and data images via the - * four BSM_DRAM_* registers. Once the bootstrap program loads the new program, - * the new program starts automatically. - * - * The uCode used for open-source drivers includes two programs: - * - * 1) Initialization -- performs hardware calibration and sets up some - * internal data, then notifies host via "initialize alive" notification - * (struct iwl_init_alive_resp) that it has completed all of its work. - * After signal from host, it then loads and starts the runtime program. - * The initialization program must be used when initially setting up the - * NIC after loading the driver. - * - * 2) Runtime/Protocol -- performs all normal runtime operations. This - * notifies host via "alive" notification (struct iwl_alive_resp) that it - * is ready to be used. - * - * When initializing the NIC, the host driver does the following procedure: - * - * 1) Load bootstrap program (instructions only, no data image for bootstrap) - * into bootstrap memory. Use dword writes starting at BSM_SRAM_LOWER_BOUND - * - * 2) Point (via BSM_DRAM_*) to the "initialize" uCode data and instruction - * images in host DRAM. - * - * 3) Set up BSM to copy from BSM SRAM into uCode instruction SRAM when asked: - * BSM_WR_MEM_SRC_REG = 0 - * BSM_WR_MEM_DST_REG = RTC_INST_LOWER_BOUND - * BSM_WR_MEM_DWCOUNT_REG = # dwords in bootstrap instruction image - * - * 4) Load bootstrap into instruction SRAM: - * BSM_WR_CTRL_REG = BSM_WR_CTRL_REG_BIT_START - * - * 5) Wait for load completion: - * Poll BSM_WR_CTRL_REG for BSM_WR_CTRL_REG_BIT_START = 0 - * - * 6) Enable future boot loads whenever NIC's power management triggers it: - * BSM_WR_CTRL_REG = BSM_WR_CTRL_REG_BIT_START_EN - * - * 7) Start the NIC by removing all reset bits: - * CSR_RESET = 0 - * - * The bootstrap uCode (already in instruction SRAM) loads initialization - * uCode. Initialization uCode performs data initialization, sends - * "initialize alive" notification to host, and waits for a signal from - * host to load runtime code. - * - * 4) Point (via BSM_DRAM_*) to the "runtime" uCode data and instruction - * images in host DRAM. The last register loaded must be the instruction - * byte count register ("1" in MSbit tells initialization uCode to load - * the runtime uCode): - * BSM_DRAM_INST_BYTECOUNT_REG = byte count | BSM_DRAM_INST_LOAD - * - * 5) Wait for "alive" notification, then issue normal runtime commands. - * - * Data caching during power-downs: - * - * Just before the embedded controller powers down (e.g for automatic - * power-saving modes, or for RFKILL), uCode stores (via PCI busmaster DMA) - * a current snapshot of the embedded processor's data SRAM into host DRAM. - * This caches the data while the embedded processor's memory is powered down. - * Location and size are controlled by BSM_DRAM_DATA_* registers. - * - * NOTE: Instruction SRAM does not need to be saved, since that doesn't - * change during operation; the original image (from uCode distribution - * file) can be used for reload. - * - * When powering back up, the BSM loads the bootstrap program. Bootstrap looks - * at the BSM_DRAM_* registers, which now point to the runtime instruction - * image and the cached (modified) runtime data (*not* the initialization - * uCode). Bootstrap reloads these runtime images into SRAM, and restarts the - * uCode from where it left off before the power-down. - * - * NOTE: Initialization uCode does *not* run as part of the save/restore - * procedure. - * - * This save/restore method is mostly for autonomous power management during - * normal operation (result of POWER_TABLE_CMD). Platform suspend/resume and - * RFKILL should use complete restarts (with total re-initialization) of uCode, - * allowing total shutdown (including BSM memory). - * - * Note that, during normal operation, the host DRAM that held the initial - * startup data for the runtime code is now being used as a backup data cache - * for modified data! If you need to completely re-initialize the NIC, make - * sure that you use the runtime data image from the uCode distribution file, - * not the modified/saved runtime data. You may want to store a separate - * "clean" runtime data image in DRAM to avoid disk reads of distribution file. - */ - -/* BSM bit fields */ -#define BSM_WR_CTRL_REG_BIT_START (0x80000000) /* start boot load now */ -#define BSM_WR_CTRL_REG_BIT_START_EN (0x40000000) /* enable boot after pwrup*/ -#define BSM_DRAM_INST_LOAD (0x80000000) /* start program load now */ - -/* BSM addresses */ -#define BSM_BASE (PRPH_BASE + 0x3400) -#define BSM_END (PRPH_BASE + 0x3800) - -#define BSM_WR_CTRL_REG (BSM_BASE + 0x000) /* ctl and status */ -#define BSM_WR_MEM_SRC_REG (BSM_BASE + 0x004) /* source in BSM mem */ -#define BSM_WR_MEM_DST_REG (BSM_BASE + 0x008) /* dest in SRAM mem */ -#define BSM_WR_DWCOUNT_REG (BSM_BASE + 0x00C) /* bytes */ -#define BSM_WR_STATUS_REG (BSM_BASE + 0x010) /* bit 0: 1 == done */ - -/* - * Pointers and size regs for bootstrap load and data SRAM save/restore. - * NOTE: 3945 pointers use bits 31:0 of DRAM address. - * 4965 pointers use bits 35:4 of DRAM address. - */ -#define BSM_DRAM_INST_PTR_REG (BSM_BASE + 0x090) -#define BSM_DRAM_INST_BYTECOUNT_REG (BSM_BASE + 0x094) -#define BSM_DRAM_DATA_PTR_REG (BSM_BASE + 0x098) -#define BSM_DRAM_DATA_BYTECOUNT_REG (BSM_BASE + 0x09C) - -/* - * BSM special memory, stays powered on during power-save sleeps. - * Read/write, address range from LOWER_BOUND to (LOWER_BOUND + SIZE -1) - */ -#define BSM_SRAM_LOWER_BOUND (PRPH_BASE + 0x3800) -#define BSM_SRAM_SIZE (1024) /* bytes */ - - -/** * Tx Scheduler * * The Tx Scheduler selects the next frame to be transmitted, choosing TFDs @@ -319,201 +183,10 @@ * Max Tx window size is the max number of contiguous TFDs that the scheduler * can keep track of at one time when creating block-ack chains of frames. * Note that "64" matches the number of ack bits in a block-ack packet. - * Driver should use SCD_WIN_SIZE and SCD_FRAME_LIMIT values to initialize - * IWL49_SCD_CONTEXT_QUEUE_OFFSET(x) values. */ #define SCD_WIN_SIZE 64 #define SCD_FRAME_LIMIT 64 -/* SCD registers are internal, must be accessed via HBUS_TARG_PRPH regs */ -#define IWL49_SCD_START_OFFSET 0xa02c00 - -/* - * 4965 tells driver SRAM address for internal scheduler structs via this reg. - * Value is valid only after "Alive" response from uCode. - */ -#define IWL49_SCD_SRAM_BASE_ADDR (IWL49_SCD_START_OFFSET + 0x0) - -/* - * Driver may need to update queue-empty bits after changing queue's - * write and read pointers (indexes) during (re-)initialization (i.e. when - * scheduler is not tracking what's happening). - * Bit fields: - * 31-16: Write mask -- 1: update empty bit, 0: don't change empty bit - * 15-00: Empty state, one for each queue -- 1: empty, 0: non-empty - * NOTE: This register is not used by Linux driver. - */ -#define IWL49_SCD_EMPTY_BITS (IWL49_SCD_START_OFFSET + 0x4) - -/* - * Physical base address of array of byte count (BC) circular buffers (CBs). - * Each Tx queue has a BC CB in host DRAM to support Scheduler-ACK mode. - * This register points to BC CB for queue 0, must be on 1024-byte boundary. - * Others are spaced by 1024 bytes. - * Each BC CB is 2 bytes * (256 + 64) = 740 bytes, followed by 384 bytes pad. - * (Index into a queue's BC CB) = (index into queue's TFD CB) = (SSN & 0xff). - * Bit fields: - * 25-00: Byte Count CB physical address [35:10], must be 1024-byte aligned. - */ -#define IWL49_SCD_DRAM_BASE_ADDR (IWL49_SCD_START_OFFSET + 0x10) - -/* - * Enables any/all Tx DMA/FIFO channels. - * Scheduler generates requests for only the active channels. - * Set this to 0xff to enable all 8 channels (normal usage). - * Bit fields: - * 7- 0: Enable (1), disable (0), one bit for each channel 0-7 - */ -#define IWL49_SCD_TXFACT (IWL49_SCD_START_OFFSET + 0x1c) -/* - * Queue (x) Write Pointers (indexes, really!), one for each Tx queue. - * Initialized and updated by driver as new TFDs are added to queue. - * NOTE: If using Block Ack, index must correspond to frame's - * Start Sequence Number; index = (SSN & 0xff) - * NOTE: Alternative to HBUS_TARG_WRPTR, which is what Linux driver uses? - */ -#define IWL49_SCD_QUEUE_WRPTR(x) (IWL49_SCD_START_OFFSET + 0x24 + (x) * 4) - -/* - * Queue (x) Read Pointers (indexes, really!), one for each Tx queue. - * For FIFO mode, index indicates next frame to transmit. - * For Scheduler-ACK mode, index indicates first frame in Tx window. - * Initialized by driver, updated by scheduler. - */ -#define IWL49_SCD_QUEUE_RDPTR(x) (IWL49_SCD_START_OFFSET + 0x64 + (x) * 4) - -/* - * Select which queues work in chain mode (1) vs. not (0). - * Use chain mode to build chains of aggregated frames. - * Bit fields: - * 31-16: Reserved - * 15-00: Mode, one bit for each queue -- 1: Chain mode, 0: one-at-a-time - * NOTE: If driver sets up queue for chain mode, it should be also set up - * Scheduler-ACK mode as well, via SCD_QUEUE_STATUS_BITS(x). - */ -#define IWL49_SCD_QUEUECHAIN_SEL (IWL49_SCD_START_OFFSET + 0xd0) - -/* - * Select which queues interrupt driver when scheduler increments - * a queue's read pointer (index). - * Bit fields: - * 31-16: Reserved - * 15-00: Interrupt enable, one bit for each queue -- 1: enabled, 0: disabled - * NOTE: This functionality is apparently a no-op; driver relies on interrupts - * from Rx queue to read Tx command responses and update Tx queues. - */ -#define IWL49_SCD_INTERRUPT_MASK (IWL49_SCD_START_OFFSET + 0xe4) - -/* - * Queue search status registers. One for each queue. - * Sets up queue mode and assigns queue to Tx DMA channel. - * Bit fields: - * 19-10: Write mask/enable bits for bits 0-9 - * 9: Driver should init to "0" - * 8: Scheduler-ACK mode (1), non-Scheduler-ACK (i.e. FIFO) mode (0). - * Driver should init to "1" for aggregation mode, or "0" otherwise. - * 7-6: Driver should init to "0" - * 5: Window Size Left; indicates whether scheduler can request - * another TFD, based on window size, etc. Driver should init - * this bit to "1" for aggregation mode, or "0" for non-agg. - * 4-1: Tx FIFO to use (range 0-7). - * 0: Queue is active (1), not active (0). - * Other bits should be written as "0" - * - * NOTE: If enabling Scheduler-ACK mode, chain mode should also be enabled - * via SCD_QUEUECHAIN_SEL. - */ -#define IWL49_SCD_QUEUE_STATUS_BITS(x)\ - (IWL49_SCD_START_OFFSET + 0x104 + (x) * 4) - -/* Bit field positions */ -#define IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE (0) -#define IWL49_SCD_QUEUE_STTS_REG_POS_TXF (1) -#define IWL49_SCD_QUEUE_STTS_REG_POS_WSL (5) -#define IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK (8) - -/* Write masks */ -#define IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (10) -#define IWL49_SCD_QUEUE_STTS_REG_MSK (0x0007FC00) - -/** - * 4965 internal SRAM structures for scheduler, shared with driver ... - * - * Driver should clear and initialize the following areas after receiving - * "Alive" response from 4965 uCode, i.e. after initial - * uCode load, or after a uCode load done for error recovery: - * - * SCD_CONTEXT_DATA_OFFSET (size 128 bytes) - * SCD_TX_STTS_BITMAP_OFFSET (size 256 bytes) - * SCD_TRANSLATE_TBL_OFFSET (size 32 bytes) - * - * Driver accesses SRAM via HBUS_TARG_MEM_* registers. - * Driver reads base address of this scheduler area from SCD_SRAM_BASE_ADDR. - * All OFFSET values must be added to this base address. - */ - -/* - * Queue context. One 8-byte entry for each of 16 queues. - * - * Driver should clear this entire area (size 0x80) to 0 after receiving - * "Alive" notification from uCode. Additionally, driver should init - * each queue's entry as follows: - * - * LS Dword bit fields: - * 0-06: Max Tx window size for Scheduler-ACK. Driver should init to 64. - * - * MS Dword bit fields: - * 16-22: Frame limit. Driver should init to 10 (0xa). - * - * Driver should init all other bits to 0. - * - * Init must be done after driver receives "Alive" response from 4965 uCode, - * and when setting up queue for aggregation. - */ -#define IWL49_SCD_CONTEXT_DATA_OFFSET 0x380 -#define IWL49_SCD_CONTEXT_QUEUE_OFFSET(x) \ - (IWL49_SCD_CONTEXT_DATA_OFFSET + ((x) * 8)) - -#define IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS (0) -#define IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK (0x0000007F) -#define IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16) -#define IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000) - -/* - * Tx Status Bitmap - * - * Driver should clear this entire area (size 0x100) to 0 after receiving - * "Alive" notification from uCode. Area is used only by device itself; - * no other support (besides clearing) is required from driver. - */ -#define IWL49_SCD_TX_STTS_BITMAP_OFFSET 0x400 - -/* - * RAxTID to queue translation mapping. - * - * When queue is in Scheduler-ACK mode, frames placed in a that queue must be - * for only one combination of receiver address (RA) and traffic ID (TID), i.e. - * one QOS priority level destined for one station (for this wireless link, - * not final destination). The SCD_TRANSLATE_TABLE area provides 16 16-bit - * mappings, one for each of the 16 queues. If queue is not in Scheduler-ACK - * mode, the device ignores the mapping value. - * - * Bit fields, for each 16-bit map: - * 15-9: Reserved, set to 0 - * 8-4: Index into device's station table for recipient station - * 3-0: Traffic ID (tid), range 0-15 - * - * Driver should clear this entire area (size 32 bytes) to 0 after receiving - * "Alive" notification from uCode. To update a 16-bit map value, driver - * must read a dword-aligned value from device SRAM, replace the 16-bit map - * value of interest, and write the dword value back into device SRAM. - */ -#define IWL49_SCD_TRANSLATE_TBL_OFFSET 0x500 - -/* Find translation table dword to read/write for given queue */ -#define IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \ - ((IWL49_SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffffffc) - #define IWL_SCD_TXFIFO_POS_TID (0) #define IWL_SCD_TXFIFO_POS_RA (4) #define IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF) |