ath11k: add thermal cooling device support

Thermal cooling device support is added to control the temperature by
throttling the data transmission for the given duration. Throttling is
done by suspending all data tx queues by given percentage of time. The
thermal device allows user to configure duty cycle.

Throttling can be disabled by setting the duty cycle to 0. The cooling
device can be found under /sys/class/thermal/cooling_deviceX/.
Corresponding soft link to this device can be found under phy folder.

/sys/class/ieee80211/phy*/device/cooling_device.

To set duty cycle as 40%,

echo 40 >/sys/class/ieee80211/phy*/device/cooling_device/cur_state

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 64 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 9cbe038da1f6..31b625a4192f 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -2442,6 +2442,70 @@ out:
 	return ret;
 }
 
+int
+ath11k_wmi_send_thermal_mitigation_param_cmd(struct ath11k *ar,
+					     struct thermal_mitigation_params *param)
+{
+	struct ath11k_pdev_wmi *wmi = ar->wmi;
+	struct wmi_therm_throt_config_request_cmd *cmd;
+	struct wmi_therm_throt_level_config_info *lvl_conf;
+	struct wmi_tlv *tlv;
+	struct sk_buff *skb;
+	int i, ret, len;
+
+	len = sizeof(*cmd) + TLV_HDR_SIZE +
+	      THERMAL_LEVELS * sizeof(struct wmi_therm_throt_level_config_info);
+
+	skb = ath11k_wmi_alloc_skb(wmi->wmi_ab, len);
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_therm_throt_config_request_cmd *)skb->data;
+
+	cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_THERM_THROT_CONFIG_REQUEST) |
+			  FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
+
+	cmd->pdev_id = ar->pdev->pdev_id;
+	cmd->enable = param->enable;
+	cmd->dc = param->dc;
+	cmd->dc_per_event = param->dc_per_event;
+	cmd->therm_throt_levels = THERMAL_LEVELS;
+
+	tlv = (struct wmi_tlv *)(skb->data + sizeof(*cmd));
+	tlv->header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_ARRAY_STRUCT) |
+		      FIELD_PREP(WMI_TLV_LEN,
+				 (THERMAL_LEVELS *
+				  sizeof(struct wmi_therm_throt_level_config_info)));
+
+	lvl_conf = (struct wmi_therm_throt_level_config_info *)(skb->data +
+								sizeof(*cmd) +
+								TLV_HDR_SIZE);
+	for (i = 0; i < THERMAL_LEVELS; i++) {
+		lvl_conf->tlv_header =
+			FIELD_PREP(WMI_TLV_TAG, WMI_TAG_THERM_THROT_LEVEL_CONFIG_INFO) |
+			FIELD_PREP(WMI_TLV_LEN, sizeof(*lvl_conf) - TLV_HDR_SIZE);
+
+		lvl_conf->temp_lwm = param->levelconf[i].tmplwm;
+		lvl_conf->temp_hwm = param->levelconf[i].tmphwm;
+		lvl_conf->dc_off_percent = param->levelconf[i].dcoffpercent;
+		lvl_conf->prio = param->levelconf[i].priority;
+		lvl_conf++;
+	}
+
+	ret = ath11k_wmi_cmd_send(wmi, skb, WMI_THERM_THROT_SET_CONF_CMDID);
+	if (ret) {
+		ath11k_warn(ar->ab, "failed to send THERM_THROT_SET_CONF cmd\n");
+		dev_kfree_skb(skb);
+	}
+
+	ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
+		   "WMI vdev set thermal throt pdev_id %d enable %d dc %d dc_per_event %x levels %d\n",
+		   ar->pdev->pdev_id, param->enable, param->dc,
+		   param->dc_per_event, THERMAL_LEVELS);
+
+	return ret;
+}
+
 int ath11k_wmi_pdev_pktlog_enable(struct ath11k *ar, u32 pktlog_filter)
 {
 	struct ath11k_pdev_wmi *wmi = ar->wmi;