diff options
author | Carl Huang <cjhuang@codeaurora.org> | 2020-08-14 10:10:29 +0300 |
---|---|---|
committer | Kalle Valo <kvalo@codeaurora.org> | 2020-08-17 13:18:35 +0300 |
commit | 727fae1478a5e7c65efa171a9639555da6ffa62a (patch) | |
tree | 37efb7b054c6e51540e44c006a47e2343e991bf7 /drivers/net/wireless/ath/ath11k/qmi.c | |
parent | 6c809d04c542e24508c26102e6c7c5e2c967032d (diff) |
ath11k: enable internal sleep clock
On x86 and other non-qcom platforms, host needs to explicitly tell the firmware
to use the internal sleep clock. Some QCA6390 modules have OTP burnt with
external sleep clock selected, and these modules can't work expectedly unless
firmware selects internal sleep clock.
Add a field to hw_params to support this difference.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597389030-13887-11-git-send-email-kvalo@codeaurora.org
Diffstat (limited to 'drivers/net/wireless/ath/ath11k/qmi.c')
-rw-r--r-- | drivers/net/wireless/ath/ath11k/qmi.c | 17 |
1 files changed, 17 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c index 12991a835b8b..b81897131f0a 100644 --- a/drivers/net/wireless/ath/ath11k/qmi.c +++ b/drivers/net/wireless/ath/ath11k/qmi.c @@ -9,6 +9,9 @@ #include <linux/of.h> #include <linux/firmware.h> +#define SLEEP_CLOCK_SELECT_INTERNAL_BIT 0x02 +#define HOST_CSTATE_BIT 0x04 + static struct qmi_elem_info qmi_wlanfw_host_cap_req_msg_v01_ei[] = { { .data_type = QMI_OPT_FLAG, @@ -1531,6 +1534,20 @@ static int ath11k_qmi_host_cap_send(struct ath11k_base *ab) req.cal_done_valid = 1; req.cal_done = ab->qmi.cal_done; + if (ab->hw_params.internal_sleep_clock) { + req.nm_modem_valid = 1; + + /* Notify firmware that this is non-qualcomm platform. */ + req.nm_modem |= HOST_CSTATE_BIT; + + /* Notify firmware about the sleep clock selection, + * nm_modem_bit[1] is used for this purpose. Host driver on + * non-qualcomm platforms should select internal sleep + * clock. + */ + req.nm_modem |= SLEEP_CLOCK_SELECT_INTERNAL_BIT; + } + ret = qmi_txn_init(&ab->qmi.handle, &txn, qmi_wlanfw_host_cap_resp_msg_v01_ei, &resp); if (ret < 0) |