diff options
| author | Wen Gong <wgong@codeaurora.org> | 2020-04-21 15:09:35 +0300 |
|---|---|---|
| committer | Kalle Valo <kvalo@codeaurora.org> | 2020-04-22 09:43:29 +0300 |
| commit | c8334512f3dd1b94844baca629f9bedca4271593 (patch) | |
| tree | 1580bbc910b49d6b2aa967b8e7d61279d92414bd /drivers/net/wireless/ath/ath10k/htt.c | |
| parent | d81709346ceac7b9131b4a091197b9d7fc5a409f (diff) | |
ath10k: add htt TX bundle for sdio
The transmission utilization ratio for sdio bus for small packet is
slow, because the space and time cost for sdio bus is same for large
length packet and small length packet. So the speed of data for large
length packet is higher than small length.
Test result of different length of data:
data packet(byte) cost time(us) calculated rate(Mbps)
256 28 73
512 33 124
1024 35 234
1792 45 318
14336 168 682
28672 333 688
57344 660 695
This patch change the TX packet from single packet to a large length
bundle packet, max size is 32, it results in significant performance
improvement on TX path.
Also there's a fourth thread "ath10k_tx_complete_wq" added to ath10k as it
improves TCP RX throughput (values in Mbps):
TCP-RX TCP-TX UDP-RX UDP-TX
use workqueue_tx_complete 423 357 448 412
change it to ar->workqueue 410 360 449 414
change it to ar->workqueue_aux 405 339 446 401
This patch only effect sdio chip, it will not effect PCI, SNOC etc.
It only enable bundle for sdio chip.
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00017-QCARMSWP-1.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200410061400.14231-2-wgong@codeaurora.org
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/htt.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/htt.c | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/htt.c b/drivers/net/wireless/ath/ath10k/htt.c index 4354bf285ff1..127b4e4980ef 100644 --- a/drivers/net/wireless/ath/ath10k/htt.c +++ b/drivers/net/wireless/ath/ath10k/htt.c @@ -135,6 +135,8 @@ int ath10k_htt_connect(struct ath10k_htt *htt) { struct ath10k_htc_svc_conn_req conn_req; struct ath10k_htc_svc_conn_resp conn_resp; + struct ath10k *ar = htt->ar; + struct ath10k_htc_ep *ep; int status; memset(&conn_req, 0, sizeof(conn_req)); @@ -142,6 +144,7 @@ int ath10k_htt_connect(struct ath10k_htt *htt) conn_req.ep_ops.ep_tx_complete = ath10k_htt_htc_tx_complete; conn_req.ep_ops.ep_rx_complete = ath10k_htt_htc_t2h_msg_handler; + conn_req.ep_ops.ep_tx_credits = ath10k_htt_op_ep_tx_credits; /* connect to control service */ conn_req.service_id = ATH10K_HTC_SVC_ID_HTT_DATA_MSG; @@ -154,6 +157,11 @@ int ath10k_htt_connect(struct ath10k_htt *htt) htt->eid = conn_resp.eid; + if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL) { + ep = &ar->htc.endpoint[htt->eid]; + ath10k_htc_setup_tx_req(ep); + } + htt->disable_tx_comp = ath10k_hif_get_htt_tx_complete(htt->ar); if (htt->disable_tx_comp) ath10k_htc_change_tx_credit_flow(&htt->ar->htc, htt->eid, true); |