diff options
author | David S. Miller <davem@davemloft.net> | 2019-05-31 10:49:43 -0700 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2019-05-31 10:49:43 -0700 |
commit | b4b12b0d2f02613101a7a667ef7b7cc8d388e597 (patch) | |
tree | ae2d52198929797821961fd0b5923b5ea1a89fe1 /drivers/net/phy | |
parent | c9bb6165a16e6d5498981a6c777b94a78e74462b (diff) | |
parent | 036e34310931e64ce4f1edead435708cd517db10 (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
The phylink conflict was between a bug fix by Russell King
to make sure we have a consistent PHY interface mode, and
a change in net-next to pull some code in phylink_resolve()
into the helper functions phylink_mac_link_{up,down}()
On the dp83867 side it's mostly overlapping changes, with
the 'net' side removing a condition that was supposed to
trigger for RGMII but because of how it was coded never
actually could trigger.
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy')
-rw-r--r-- | drivers/net/phy/dp83867.c | 52 | ||||
-rw-r--r-- | drivers/net/phy/marvell10g.c | 13 | ||||
-rw-r--r-- | drivers/net/phy/phylink.c | 7 |
3 files changed, 62 insertions, 10 deletions
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 3bdf94043693..1f1ecee0ee2f 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -26,11 +26,19 @@ /* Extended Registers */ #define DP83867_CFG4 0x0031 +#define DP83867_CFG4_SGMII_ANEG_MASK (BIT(5) | BIT(6)) +#define DP83867_CFG4_SGMII_ANEG_TIMER_11MS (3 << 5) +#define DP83867_CFG4_SGMII_ANEG_TIMER_800US (2 << 5) +#define DP83867_CFG4_SGMII_ANEG_TIMER_2US (1 << 5) +#define DP83867_CFG4_SGMII_ANEG_TIMER_16MS (0 << 5) + #define DP83867_RGMIICTL 0x0032 #define DP83867_STRAP_STS1 0x006E #define DP83867_STRAP_STS2 0x006f #define DP83867_RGMIIDCTL 0x0086 #define DP83867_IO_MUX_CFG 0x0170 +#define DP83867_10M_SGMII_CFG 0x016F +#define DP83867_10M_SGMII_RATE_ADAPT_MASK BIT(7) #define DP83867_SW_RESET BIT(15) #define DP83867_SW_RESTART BIT(14) @@ -321,15 +329,14 @@ static int dp83867_config_init(struct phy_device *phydev) ret = phy_write(phydev, MII_DP83867_PHYCTRL, val); if (ret) return ret; - } - /* If rgmii mode with no internal delay is selected, we do NOT use - * aligned mode as one might expect. Instead we use the PHY's default - * based on pin strapping. And the "mode 0" default is to *use* - * internal delay with a value of 7 (2.00 ns). - */ - if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) && - (phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) { + /* If rgmii mode with no internal delay is selected, we do NOT use + * aligned mode as one might expect. Instead we use the PHY's default + * based on pin strapping. And the "mode 0" default is to *use* + * internal delay with a value of 7 (2.00 ns). + * + * Set up RGMII delays + */ val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL); val &= ~(DP83867_RGMII_TX_CLK_DELAY_EN | DP83867_RGMII_RX_CLK_DELAY_EN); @@ -357,6 +364,33 @@ static int dp83867_config_init(struct phy_device *phydev) DP83867_IO_MUX_CFG_IO_IMPEDANCE_MASK, dp83867->io_impedance); + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { + /* For support SPEED_10 in SGMII mode + * DP83867_10M_SGMII_RATE_ADAPT bit + * has to be cleared by software. That + * does not affect SPEED_100 and + * SPEED_1000. + */ + ret = phy_modify_mmd(phydev, DP83867_DEVADDR, + DP83867_10M_SGMII_CFG, + DP83867_10M_SGMII_RATE_ADAPT_MASK, + 0); + if (ret) + return ret; + + /* After reset SGMII Autoneg timer is set to 2us (bits 6 and 5 + * are 01). That is not enough to finalize autoneg on some + * devices. Increase this timer duration to maximum 16ms. + */ + ret = phy_modify_mmd(phydev, DP83867_DEVADDR, + DP83867_CFG4, + DP83867_CFG4_SGMII_ANEG_MASK, + DP83867_CFG4_SGMII_ANEG_TIMER_16MS); + + if (ret) + return ret; + } + /* Enable Interrupt output INT_OE in CFG3 register */ if (phy_interrupt_is_valid(phydev)) { val = phy_read(phydev, DP83867_CFG3); @@ -396,7 +430,7 @@ static int dp83867_phy_reset(struct phy_device *phydev) usleep_range(10, 20); - return dp83867_config_init(phydev); + return 0; } static struct phy_driver dp83867_driver[] = { diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index 238a20e13d6a..3b99882692e3 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -31,6 +31,9 @@ #define MV_PHY_ALASKA_NBT_QUIRK_REV (MARVELL_PHY_ID_88X3310 | 0xa) enum { + MV_PMA_BOOT = 0xc050, + MV_PMA_BOOT_FATAL = BIT(0), + MV_PCS_BASE_T = 0x0000, MV_PCS_BASE_R = 0x1000, MV_PCS_1000BASEX = 0x2000, @@ -213,6 +216,16 @@ static int mv3310_probe(struct phy_device *phydev) (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask) return -ENODEV; + ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_BOOT); + if (ret < 0) + return ret; + + if (ret & MV_PMA_BOOT_FATAL) { + dev_warn(&phydev->mdio.dev, + "PHY failed to boot firmware, status=%04x\n", ret); + return -ENODEV; + } + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 68d0a89c52be..b7300ea2663c 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -54,6 +54,10 @@ struct phylink { /* The link configuration settings */ struct phylink_link_state link_config; + + /* The current settings */ + phy_interface_t cur_interface; + struct gpio_desc *link_gpio; struct timer_list link_poll; void (*get_fixed_state)(struct net_device *dev, @@ -419,6 +423,7 @@ static void phylink_mac_link_up(struct phylink *pl, { struct net_device *ndev = pl->netdev; + pl->cur_interface = link_state.interface; pl->ops->mac_link_up(pl->config, pl->link_an_mode, pl->phy_state.interface, pl->phydev); @@ -440,7 +445,7 @@ static void phylink_mac_link_down(struct phylink *pl) if (ndev) netif_carrier_off(ndev); pl->ops->mac_link_down(pl->config, pl->link_an_mode, - pl->phy_state.interface); + pl->cur_interface); phylink_info(pl, "Link is Down\n"); } |