Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Add VF IPSEC offload support in ixgbe, from Shannon Nelson.

 2) Add zero-copy AF_XDP support to i40e, from Björn Töpel.

 3) All in-tree drivers are converted to {g,s}et_link_ksettings() so we
    can get rid of the {g,s}et_settings ethtool callbacks, from Michal
    Kubecek.

 4) Add software timestamping to veth driver, from Michael Walle.

 5) More work to make packet classifiers and actions lockless, from Vlad
    Buslov.

 6) Support sticky FDB entries in bridge, from Nikolay Aleksandrov.

 7) Add ipv6 version of IP_MULTICAST_ALL sockopt, from Andre Naujoks.

 8) Support batching of XDP buffers in vhost_net, from Jason Wang.

 9) Add flow dissector BPF hook, from Petar Penkov.

10) i40e vf --> generic iavf conversion, from Jesse Brandeburg.

11) Add NLA_REJECT netlink attribute policy type, to signal when users
    provide attributes in situations which don't make sense. From
    Johannes Berg.

12) Switch TCP and fair-queue scheduler over to earliest departure time
    model. From Eric Dumazet.

13) Improve guest receive performance by doing rx busy polling in tx
    path of vhost networking driver, from Tonghao Zhang.

14) Add per-cgroup local storage to bpf

15) Add reference tracking to BPF, from Joe Stringer. The verifier can
    now make sure that references taken to objects are properly released
    by the program.

16) Support in-place encryption in TLS, from Vakul Garg.

17) Add new taprio packet scheduler, from Vinicius Costa Gomes.

18) Lots of selftests additions, too numerous to mention one by one here
    but all of which are very much appreciated.

19) Support offloading of eBPF programs containing BPF to BPF calls in
    nfp driver, frm Quentin Monnet.

20) Move dpaa2_ptp driver out of staging, from Yangbo Lu.

21) Lots of u32 classifier cleanups and simplifications, from Al Viro.

22) Add new strict versions of netlink message parsers, and enable them
    for some situations. From David Ahern.

23) Evict neighbour entries on carrier down, also from David Ahern.

24) Support BPF sk_msg verdict programs with kTLS, from Daniel Borkmann
    and John Fastabend.

25) Add support for filtering route dumps, from David Ahern.

26) New igc Intel driver for 2.5G parts, from Sasha Neftin et al.

27) Allow vxlan enslavement to bridges in mlxsw driver, from Ido
    Schimmel.

28) Add queue and stack map types to eBPF, from Mauricio Vasquez B.

29) Add back byte-queue-limit support to r8169, with all the bug fixes
    in other areas of the driver it works now! From Florian Westphal and
    Heiner Kallweit.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2147 commits)
  tcp: add tcp_reset_xmit_timer() helper
  qed: Fix static checker warning
  Revert "be2net: remove desc field from be_eq_obj"
  Revert "net: simplify sock_poll_wait"
  net: socionext: Reset tx queue in ndo_stop
  net: socionext: Add dummy PHY register read in phy_write()
  net: socionext: Stop PHY before resetting netsec
  net: stmmac: Set OWN bit for jumbo frames
  arm64: dts: stratix10: Support Ethernet Jumbo frame
  tls: Add maintainers
  net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode
  octeontx2-af: Support for NIXLF's UCAST/PROMISC/ALLMULTI modes
  octeontx2-af: Support for setting MAC address
  octeontx2-af: Support for changing RSS algorithm
  octeontx2-af: NIX Rx flowkey configuration for RSS
  octeontx2-af: Install ucast and bcast pkt forwarding rules
  octeontx2-af: Add LMAC channel info to NIXLF_ALLOC response
  octeontx2-af: NPC MCAM and LDATA extract minimal configuration
  octeontx2-af: Enable packet length and csum validation
  octeontx2-af: Support for VTAG strip and capture
  ...

20 files changed, 1997 insertions, 367 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 82070792edbb..3d187cd50eb0 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -240,7 +240,7 @@ config AT803X_PHY
 
 config BCM63XX_PHY
 	tristate "Broadcom 63xx SOCs internal PHY"
-	depends on BCM63XX
+	depends on BCM63XX || COMPILE_TEST
 	select BCM_NET_PHYLIB
 	---help---
 	  Currently supports the 6348 and 6358 PHYs.
diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c
index 319edc9c8ec7..632472cab3bb 100644
--- a/drivers/net/phy/aquantia.c
+++ b/drivers/net/phy/aquantia.c
@@ -115,7 +115,7 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id		= PHY_ID_AQ1202,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQ1202",
-	.features	= PHY_AQUANTIA_FEATURES,
+	.features	= PHY_10GBIT_FULL_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
@@ -127,7 +127,7 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id		= PHY_ID_AQ2104,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQ2104",
-	.features	= PHY_AQUANTIA_FEATURES,
+	.features	= PHY_10GBIT_FULL_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
@@ -139,7 +139,7 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id		= PHY_ID_AQR105,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQR105",
-	.features	= PHY_AQUANTIA_FEATURES,
+	.features	= PHY_10GBIT_FULL_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
@@ -151,7 +151,7 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id		= PHY_ID_AQR106,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQR106",
-	.features	= PHY_AQUANTIA_FEATURES,
+	.features	= PHY_10GBIT_FULL_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
@@ -163,7 +163,7 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id		= PHY_ID_AQR107,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQR107",
-	.features	= PHY_AQUANTIA_FEATURES,
+	.features	= PHY_10GBIT_FULL_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
@@ -175,7 +175,7 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id		= PHY_ID_AQR405,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQR405",
-	.features	= PHY_AQUANTIA_FEATURES,
+	.features	= PHY_10GBIT_FULL_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 411cf1072bae..e74a047a846e 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -357,7 +357,7 @@ static int at803x_aneg_done(struct phy_device *phydev)
 
 	/* check if the SGMII link is OK. */
 	if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
-		pr_warn("803x_aneg_done: SGMII link is not ok\n");
+		phydev_warn(phydev, "803x_aneg_done: SGMII link is not ok\n");
 		aneg_done = 0;
 	}
 	/* switch back to copper page */
diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c
index cf14613745c9..d95bffdec4c1 100644
--- a/drivers/net/phy/bcm63xx.c
+++ b/drivers/net/phy/bcm63xx.c
@@ -42,6 +42,9 @@ static int bcm63xx_config_init(struct phy_device *phydev)
 {
 	int reg, err;
 
+	/* ASYM_PAUSE bit is marked RO in datasheet, so don't cheat */
+	phydev->supported |= SUPPORTED_Pause;
+
 	reg = phy_read(phydev, MII_BCM63XX_IR);
 	if (reg < 0)
 		return reg;
@@ -65,8 +68,7 @@ static struct phy_driver bcm63xx_driver[] = {
 	.phy_id		= 0x00406000,
 	.phy_id_mask	= 0xfffffc00,
 	.name		= "Broadcom BCM63XX (1)",
-	/* ASYM_PAUSE bit is marked RO in datasheet, so don't cheat */
-	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+	.features	= PHY_BASIC_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT | PHY_IS_INTERNAL,
 	.config_init	= bcm63xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
@@ -75,8 +77,7 @@ static struct phy_driver bcm63xx_driver[] = {
 	/* same phy as above, with just a different OUI */
 	.phy_id		= 0x002bdc00,
 	.phy_id_mask	= 0xfffffc00,
-	.name		= "Broadcom BCM63XX (2)",
-	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+	.features	= PHY_BASIC_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT | PHY_IS_INTERNAL,
 	.config_init	= bcm63xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 29aa8d772b0c..edd4d44a386d 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -553,16 +553,17 @@ static void enable_status_frames(struct phy_device *phydev, bool on)
 	mutex_unlock(&clock->extreg_lock);
 
 	if (!phydev->attached_dev) {
-		pr_warn("expected to find an attached netdevice\n");
+		phydev_warn(phydev,
+			    "expected to find an attached netdevice\n");
 		return;
 	}
 
 	if (on) {
 		if (dev_mc_add(phydev->attached_dev, status_frame_dst))
-			pr_warn("failed to add mc address\n");
+			phydev_warn(phydev, "failed to add mc address\n");
 	} else {
 		if (dev_mc_del(phydev->attached_dev, status_frame_dst))
-			pr_warn("failed to delete mc address\n");
+			phydev_warn(phydev, "failed to delete mc address\n");
 	}
 }
 
@@ -686,9 +687,9 @@ static void recalibrate(struct dp83640_clock *clock)
 	 * read out and correct offsets
 	 */
 	val = ext_read(master, PAGE4, PTP_STS);
-	pr_info("master PTP_STS  0x%04hx\n", val);
+	phydev_info(master, "master PTP_STS  0x%04hx\n", val);
 	val = ext_read(master, PAGE4, PTP_ESTS);
-	pr_info("master PTP_ESTS 0x%04hx\n", val);
+	phydev_info(master, "master PTP_ESTS 0x%04hx\n", val);
 	event_ts.ns_lo  = ext_read(master, PAGE4, PTP_EDATA);
 	event_ts.ns_hi  = ext_read(master, PAGE4, PTP_EDATA);
 	event_ts.sec_lo = ext_read(master, PAGE4, PTP_EDATA);
@@ -698,15 +699,16 @@ static void recalibrate(struct dp83640_clock *clock)
 	list_for_each(this, &clock->phylist) {
 		tmp = list_entry(this, struct dp83640_private, list);
 		val = ext_read(tmp->phydev, PAGE4, PTP_STS);
-		pr_info("slave  PTP_STS  0x%04hx\n", val);
+		phydev_info(tmp->phydev, "slave  PTP_STS  0x%04hx\n", val);
 		val = ext_read(tmp->phydev, PAGE4, PTP_ESTS);
-		pr_info("slave  PTP_ESTS 0x%04hx\n", val);
+		phydev_info(tmp->phydev, "slave  PTP_ESTS 0x%04hx\n", val);
 		event_ts.ns_lo  = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
 		event_ts.ns_hi  = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
 		event_ts.sec_lo = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
 		event_ts.sec_hi = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
 		diff = now - (s64) phy2txts(&event_ts);
-		pr_info("slave offset %lld nanoseconds\n", diff);
+		phydev_info(tmp->phydev, "slave offset %lld nanoseconds\n",
+			    diff);
 		diff += ADJTIME_FIX;
 		ts = ns_to_timespec64(diff);
 		tdr_write(0, tmp->phydev, &ts, PTP_STEP_CLK);
diff --git a/drivers/net/phy/et1011c.c b/drivers/net/phy/et1011c.c
index a9a4edfa23c8..565e49e7f76f 100644
--- a/drivers/net/phy/et1011c.c
+++ b/drivers/net/phy/et1011c.c
@@ -91,8 +91,7 @@ static struct phy_driver et1011c_driver[] = { {
 	.phy_id		= 0x0282f014,
 	.name		= "ET1011C",
 	.phy_id_mask	= 0xfffffff0,
-	.features	= (PHY_BASIC_FEATURES | SUPPORTED_1000baseT_Full),
-	.flags		= PHY_POLL,
+	.features	= PHY_GBIT_FEATURES,
 	.config_aneg	= et1011c_config_aneg,
 	.read_status	= et1011c_read_status,
 } };
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index f7c69ca34056..cbec296107bd 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -265,7 +265,7 @@ static int marvell_set_polarity(struct phy_device *phydev, int polarity)
 			return err;
 	}
 
-	return 0;
+	return val != reg;
 }
 
 static int marvell_set_downshift(struct phy_device *phydev, bool enable,
@@ -287,12 +287,15 @@ static int marvell_set_downshift(struct phy_device *phydev, bool enable,
 
 static int marvell_config_aneg(struct phy_device *phydev)
 {
+	int changed = 0;
 	int err;
 
 	err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
 	if (err < 0)
 		return err;
 
+	changed = err;
+
 	err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL,
 			MII_M1111_PHY_LED_DIRECT);
 	if (err < 0)
@@ -302,7 +305,7 @@ static int marvell_config_aneg(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
-	if (phydev->autoneg != AUTONEG_ENABLE) {
+	if (phydev->autoneg != AUTONEG_ENABLE || changed) {
 		/* A write to speed/duplex bits (that is performed by
 		 * genphy_config_aneg() call above) must be followed by
 		 * a software reset. Otherwise, the write has no effect.
@@ -350,42 +353,6 @@ static int m88e1101_config_aneg(struct phy_device *phydev)
 	return marvell_config_aneg(phydev);
 }
 
-static int m88e1111_config_aneg(struct phy_device *phydev)
-{
-	int err;
-
-	/* The Marvell PHY has an errata which requires
-	 * that certain registers get written in order
-	 * to restart autonegotiation
-	 */
-	err = genphy_soft_reset(phydev);
-
-	err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
-	if (err < 0)
-		return err;
-
-	err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL,
-			MII_M1111_PHY_LED_DIRECT);
-	if (err < 0)
-		return err;
-
-	err = genphy_config_aneg(phydev);
-	if (err < 0)
-		return err;
-
-	if (phydev->autoneg != AUTONEG_ENABLE) {
-		/* A write to speed/duplex bits (that is performed by
-		 * genphy_config_aneg() call above) must be followed by
-		 * a software reset. Otherwise, the write has no effect.
-		 */
-		err = genphy_soft_reset(phydev);
-		if (err < 0)
-			return err;
-	}
-
-	return 0;
-}
-
 #ifdef CONFIG_OF_MDIO
 /* Set and/or override some configuration registers based on the
  * marvell,reg-init property stored in the of_node for the phydev.
@@ -479,6 +446,7 @@ static int m88e1121_config_aneg_rgmii_delays(struct phy_device *phydev)
 
 static int m88e1121_config_aneg(struct phy_device *phydev)
 {
+	int changed = 0;
 	int err = 0;
 
 	if (phy_interface_is_rgmii(phydev)) {
@@ -487,15 +455,26 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
 			return err;
 	}
 
-	err = genphy_soft_reset(phydev);
+	err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
 	if (err < 0)
 		return err;
 
-	err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
+	changed = err;
+
+	err = genphy_config_aneg(phydev);
 	if (err < 0)
 		return err;
 
-	return genphy_config_aneg(phydev);
+	if (phydev->autoneg != AUTONEG_ENABLE || changed) {
+		/* A software reset is used to ensure a "commit" of the
+		 * changes is done.
+		 */
+		err = genphy_soft_reset(phydev);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
 }
 
 static int m88e1318_config_aneg(struct phy_device *phydev)
@@ -659,7 +638,7 @@ static void marvell_config_led(struct phy_device *phydev)
 	err = phy_write_paged(phydev, MII_MARVELL_LED_PAGE, MII_PHY_LED_CTRL,
 			      def_config);
 	if (err < 0)
-		pr_warn("Fail to config marvell phy LED.\n");
+		phydev_warn(phydev, "Fail to config marvell phy LED.\n");
 }
 
 static int marvell_config_init(struct phy_device *phydev)
@@ -2067,7 +2046,7 @@ static struct phy_driver marvell_drivers[] = {
 		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
 		.config_init = &m88e1111_config_init,
-		.config_aneg = &m88e1111_config_aneg,
+		.config_aneg = &marvell_config_aneg,
 		.read_status = &marvell_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
 		.config_intr = &marvell_config_intr,
@@ -2222,7 +2201,7 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id = MARVELL_PHY_ID_88E1510,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1510",
-		.features = PHY_GBIT_FEATURES | SUPPORTED_FIBRE,
+		.features = PHY_GBIT_FIBRE_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
 		.probe = &m88e1510_probe,
 		.config_init = &m88e1510_config_init,
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index f77a2d9e7f9d..1c9d039eec63 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -337,9 +337,9 @@ static int mv3310_config_init(struct phy_device *phydev)
 	}
 
 	if (!ethtool_convert_link_mode_to_legacy_u32(&mask, supported))
-		dev_warn(&phydev->mdio.dev,
-			 "PHY supports (%*pb) more modes than phylib supports, some modes not supported.\n",
-			 __ETHTOOL_LINK_MODE_MASK_NBITS, supported);
+		phydev_warn(phydev,
+			    "PHY supports (%*pb) more modes than phylib supports, some modes not supported.\n",
+			    __ETHTOOL_LINK_MODE_MASK_NBITS, supported);
 
 	phydev->supported &= mask;
 	phydev->advertising &= phydev->supported;
@@ -535,16 +535,7 @@ static struct phy_driver mv3310_drivers[] = {
 		.phy_id		= 0x002b09aa,
 		.phy_id_mask	= MARVELL_PHY_ID_MASK,
 		.name		= "mv88x3310",
-		.features	= SUPPORTED_10baseT_Full |
-				  SUPPORTED_10baseT_Half |
-				  SUPPORTED_100baseT_Full |
-				  SUPPORTED_100baseT_Half |
-				  SUPPORTED_1000baseT_Full |
-				  SUPPORTED_Autoneg |
-				  SUPPORTED_TP |
-				  SUPPORTED_FIBRE |
-				  SUPPORTED_10000baseT_Full |
-				  SUPPORTED_Backplane,
+		.features	= PHY_10GBIT_FEATURES,
 		.soft_reset	= gen10g_no_soft_reset,
 		.config_init	= mv3310_config_init,
 		.probe		= mv3310_probe,
diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c
index 8d370667fa1b..df75efa96a7d 100644
--- a/drivers/net/phy/mdio-bcm-unimac.c
+++ b/drivers/net/phy/mdio-bcm-unimac.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <linux/of.h>
 #include <linux/of_platform.h>
@@ -45,6 +46,8 @@ struct unimac_mdio_priv {
 	void __iomem		*base;
 	int (*wait_func)	(void *wait_func_data);
 	void			*wait_func_data;
+	struct clk		*clk;
+	u32			clk_freq;
 };
 
 static inline u32 unimac_mdio_readl(struct unimac_mdio_priv *priv, u32 offset)
@@ -189,6 +192,35 @@ static int unimac_mdio_reset(struct mii_bus *bus)
 	return 0;
 }
 
+static void unimac_mdio_clk_set(struct unimac_mdio_priv *priv)
+{
+	unsigned long rate;
+	u32 reg, div;
+
+	/* Keep the hardware default values */
+	if (!priv->clk_freq)
+		return;
+
+	if (!priv->clk)
+		rate = 250000000;
+	else
+		rate = clk_get_rate(priv->clk);
+
+	div = (rate / (2 * priv->clk_freq)) - 1;
+	if (div & ~MDIO_CLK_DIV_MASK) {
+		pr_warn("Incorrect MDIO clock frequency, ignoring\n");
+		return;
+	}
+
+	/* The MDIO clock is the reference clock (typicaly 250Mhz) divided by
+	 * 2 x (MDIO_CLK_DIV + 1)
+	 */
+	reg = unimac_mdio_readl(priv, MDIO_CFG);
+	reg &= ~(MDIO_CLK_DIV_MASK << MDIO_CLK_DIV_SHIFT);
+	reg |= div << MDIO_CLK_DIV_SHIFT;
+	unimac_mdio_writel(priv, reg, MDIO_CFG);
+}
+
 static int unimac_mdio_probe(struct platform_device *pdev)
 {
 	struct unimac_mdio_pdata *pdata = pdev->dev.platform_data;
@@ -217,9 +249,26 @@ static int unimac_mdio_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (PTR_ERR(priv->clk) == -EPROBE_DEFER)
+		return PTR_ERR(priv->clk);
+	else
+		priv->clk = NULL;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	if (of_property_read_u32(np, "clock-frequency", &priv->clk_freq))
+		priv->clk_freq = 0;
+
+	unimac_mdio_clk_set(priv);
+
 	priv->mii_bus = mdiobus_alloc();
-	if (!priv->mii_bus)
-		return -ENOMEM;
+	if (!priv->mii_bus) {
+		ret = -ENOMEM;
+		goto out_clk_disable;
+	}
 
 	bus = priv->mii_bus;
 	bus->priv = priv;
@@ -253,6 +302,8 @@ static int unimac_mdio_probe(struct platform_device *pdev)
 
 out_mdio_free:
 	mdiobus_free(bus);
+out_clk_disable:
+	clk_disable_unprepare(priv->clk);
 	return ret;
 }
 
@@ -262,10 +313,37 @@ static int unimac_mdio_remove(struct platform_device *pdev)
 
 	mdiobus_unregister(priv->mii_bus);
 	mdiobus_free(priv->mii_bus);
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static int __maybe_unused unimac_mdio_suspend(struct device *d)
+{
+	struct unimac_mdio_priv *priv = dev_get_drvdata(d);
+
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static int __maybe_unused unimac_mdio_resume(struct device *d)
+{
+	struct unimac_mdio_priv *priv = dev_get_drvdata(d);
+	int ret;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	unimac_mdio_clk_set(priv);
 
 	return 0;
 }
 
+static SIMPLE_DEV_PM_OPS(unimac_mdio_pm_ops,
+			 unimac_mdio_suspend, unimac_mdio_resume);
+
 static const struct of_device_id unimac_mdio_ids[] = {
 	{ .compatible = "brcm,genet-mdio-v5", },
 	{ .compatible = "brcm,genet-mdio-v4", },
@@ -281,6 +359,7 @@ static struct platform_driver unimac_mdio_driver = {
 	.driver = {
 		.name = UNIMAC_MDIO_DRV_NAME,
 		.of_match_table = unimac_mdio_ids,
+		.pm = &unimac_mdio_pm_ops,
 	},
 	.probe	= unimac_mdio_probe,
 	.remove	= unimac_mdio_remove,
diff --git a/drivers/net/phy/mdio-mux-bcm-iproc.c b/drivers/net/phy/mdio-mux-bcm-iproc.c
index c017486e9b86..696bdf1e4576 100644
--- a/drivers/net/phy/mdio-mux-bcm-iproc.c
+++ b/drivers/net/phy/mdio-mux-bcm-iproc.c
@@ -289,8 +289,7 @@ static int mdio_mux_iproc_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM_SLEEP
 static int mdio_mux_iproc_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct iproc_mdiomux_desc *md = platform_get_drvdata(pdev);
+	struct iproc_mdiomux_desc *md = dev_get_drvdata(dev);
 
 	clk_disable_unprepare(md->core_clk);
 
@@ -299,8 +298,7 @@ static int mdio_mux_iproc_suspend(struct device *dev)
 
 static int mdio_mux_iproc_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct iproc_mdiomux_desc *md = platform_get_drvdata(pdev);
+	struct iproc_mdiomux_desc *md = dev_get_drvdata(dev);
 
 	clk_prepare_enable(md->core_clk);
 	mdio_mux_iproc_config(md);
diff --git a/drivers/net/phy/mdio-thunder.c b/drivers/net/phy/mdio-thunder.c
index 564616968cad..1546f6398831 100644
--- a/drivers/net/phy/mdio-thunder.c
+++ b/drivers/net/phy/mdio-thunder.c
@@ -73,8 +73,8 @@ static int thunder_mdiobus_pci_probe(struct pci_dev *pdev,
 		err = of_address_to_resource(node, 0, &r);
 		if (err) {
 			dev_err(&pdev->dev,
-				"Couldn't translate address for \"%s\"\n",
-				node->name);
+				"Couldn't translate address for \"%pOFn\"\n",
+				node);
 			break;
 		}
 
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 98f4b1f706df..2e59a8419b17 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -38,7 +38,6 @@
 #include <linux/phy.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
-#include <linux/gpio/consumer.h>
 
 #include <asm/irq.h>
 
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 3db06b40580d..9265dea79412 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -14,7 +14,7 @@
  * option) any later version.
  *
  * Support : Micrel Phys:
- *		Giga phys: ksz9021, ksz9031
+ *		Giga phys: ksz9021, ksz9031, ksz9131
  *		100/10 Phys : ksz8001, ksz8721, ksz8737, ksz8041
  *			   ksz8021, ksz8031, ksz8051,
  *			   ksz8081, ksz8091,
@@ -609,6 +609,116 @@ err_force_master:
 	return result;
 }
 
+#define KSZ9131_SKEW_5BIT_MAX	2400
+#define KSZ9131_SKEW_4BIT_MAX	800
+#define KSZ9131_OFFSET		700
+#define KSZ9131_STEP		100
+
+static int ksz9131_of_load_skew_values(struct phy_device *phydev,
+				       struct device_node *of_node,
+				       u16 reg, size_t field_sz,
+				       char *field[], u8 numfields)
+{
+	int val[4] = {-(1 + KSZ9131_OFFSET), -(2 + KSZ9131_OFFSET),
+		      -(3 + KSZ9131_OFFSET), -(4 + KSZ9131_OFFSET)};
+	int skewval, skewmax = 0;
+	int matches = 0;
+	u16 maxval;
+	u16 newval;
+	u16 mask;
+	int i;
+
+	/* psec properties in dts should mean x pico seconds */
+	if (field_sz == 5)
+		skewmax = KSZ9131_SKEW_5BIT_MAX;
+	else
+		skewmax = KSZ9131_SKEW_4BIT_MAX;
+
+	for (i = 0; i < numfields; i++)
+		if (!of_property_read_s32(of_node, field[i], &skewval)) {
+			if (skewval < -KSZ9131_OFFSET)
+				skewval = -KSZ9131_OFFSET;
+			else if (skewval > skewmax)
+				skewval = skewmax;
+
+			val[i] = skewval + KSZ9131_OFFSET;
+			matches++;
+		}
+
+	if (!matches)
+		return 0;
+
+	if (matches < numfields)
+		newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg);
+	else
+		newval = 0;
+
+	maxval = (field_sz == 4) ? 0xf : 0x1f;
+	for (i = 0; i < numfields; i++)
+		if (val[i] != -(i + 1 + KSZ9131_OFFSET)) {
+			mask = 0xffff;
+			mask ^= maxval << (field_sz * i);
+			newval = (newval & mask) |
+				(((val[i] / KSZ9131_STEP) & maxval)
+					<< (field_sz * i));
+		}
+
+	return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval);
+}
+
+static int ksz9131_config_init(struct phy_device *phydev)
+{
+	const struct device *dev = &phydev->mdio.dev;
+	struct device_node *of_node = dev->of_node;
+	char *clk_skews[2] = {"rxc-skew-psec", "txc-skew-psec"};
+	char *rx_data_skews[4] = {
+		"rxd0-skew-psec", "rxd1-skew-psec",
+		"rxd2-skew-psec", "rxd3-skew-psec"
+	};
+	char *tx_data_skews[4] = {
+		"txd0-skew-psec", "txd1-skew-psec",
+		"txd2-skew-psec", "txd3-skew-psec"
+	};
+	char *control_skews[2] = {"txen-skew-psec", "rxdv-skew-psec"};
+	const struct device *dev_walker;
+	int ret;
+
+	dev_walker = &phydev->mdio.dev;
+	do {
+		of_node = dev_walker->of_node;
+		dev_walker = dev_walker->parent;
+	} while (!of_node && dev_walker);
+
+	if (!of_node)
+		return 0;
+
+	ret = ksz9131_of_load_skew_values(phydev, of_node,
+					  MII_KSZ9031RN_CLK_PAD_SKEW, 5,
+					  clk_skews, 2);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz9131_of_load_skew_values(phydev, of_node,
+					  MII_KSZ9031RN_CONTROL_PAD_SKEW, 4,
+					  control_skews, 2);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz9131_of_load_skew_values(phydev, of_node,
+					  MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4,
+					  rx_data_skews, 4);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz9131_of_load_skew_values(phydev, of_node,
+					  MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
+					  tx_data_skews, 4);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
 #define KSZ8873MLL_GLOBAL_CONTROL_4	0x06
 #define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX	BIT(6)
 #define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED	BIT(4)
@@ -975,6 +1085,23 @@ static struct phy_driver ksphy_driver[] = {
 	.suspend	= genphy_suspend,
 	.resume		= kszphy_resume,
 }, {
+	.phy_id		= PHY_ID_KSZ9131,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Microchip KSZ9131 Gigabit PHY",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.driver_data	= &ksz9021_type,
+	.probe		= kszphy_probe,
+	.config_init	= ksz9131_config_init,
+	.read_status	= ksz9031_read_status,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= genphy_suspend,
+	.resume		= kszphy_resume,
+}, {
 	.phy_id		= PHY_ID_KSZ8873MLL,
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KSZ8873MLL Switch",
@@ -1022,6 +1149,7 @@ MODULE_LICENSE("GPL");
 static struct mdio_device_id __maybe_unused micrel_tbl[] = {
 	{ PHY_ID_KSZ9021, 0x000ffffe },
 	{ PHY_ID_KSZ9031, MICREL_PHY_ID_MASK },
+	{ PHY_ID_KSZ9131, MICREL_PHY_ID_MASK },
 	{ PHY_ID_KSZ8001, 0x00fffffc },
 	{ PHY_ID_KS8737, MICREL_PHY_ID_MASK },
 	{ PHY_ID_KSZ8021, 0x00ffffff },
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index 2d67937866a3..04b12e34da58 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -88,7 +88,7 @@ static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
 	/* Save current page */
 	save_page = phy_save_page(phydev);
 	if (save_page < 0) {
-		pr_warn("Failed to get current page\n");
+		phydev_warn(phydev, "Failed to get current page\n");
 		goto err;
 	}
 
@@ -98,14 +98,14 @@ static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
 	ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_LOW_DATA,
 			  (data & 0xFFFF));
 	if (ret < 0) {
-		pr_warn("Failed to write TR low data\n");
+		phydev_warn(phydev, "Failed to write TR low data\n");
 		goto err;
 	}
 
 	ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_HIGH_DATA,
 			  (data & 0x00FF0000) >> 16);
 	if (ret < 0) {
-		pr_warn("Failed to write TR high data\n");
+		phydev_warn(phydev, "Failed to write TR high data\n");
 		goto err;
 	}
 
@@ -115,14 +115,15 @@ static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
 
 	ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_CR, buf);
 	if (ret < 0) {
-		pr_warn("Failed to write data in reg\n");
+		phydev_warn(phydev, "Failed to write data in reg\n");
 		goto err;
 	}
 
 	usleep_range(1000, 2000);/* Wait for Data to be written */
 	val = __phy_read(phydev, LAN88XX_EXT_PAGE_TR_CR);
 	if (!(val & 0x8000))
-		pr_warn("TR Register[0x%X] configuration failed\n", regaddr);
+		phydev_warn(phydev, "TR Register[0x%X] configuration failed\n",
+			    regaddr);
 err:
 	return phy_restore_page(phydev, save_page, ret);
 }
@@ -137,7 +138,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x0F82, 0x12B00A);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x0F82]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x0F82]\n");
 
 	/* Get access to Channel b'10, Node b'1101, Register 0x06.
 	 * Write 24-bit value 0xD2C46F to register. Setting SSTrKf1000Slv,
@@ -145,7 +146,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x168C, 0xD2C46F);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x168C]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x168C]\n");
 
 	/* Get access to Channel b'10, Node b'1111, Register 0x11.
 	 * Write 24-bit value 0x620 to register. Setting rem_upd_done_thresh
@@ -153,7 +154,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x17A2, 0x620);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x17A2]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x17A2]\n");
 
 	/* Get access to Channel b'10, Node b'1101, Register 0x10.
 	 * Write 24-bit value 0xEEFFDD to register. Setting
@@ -162,7 +163,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x16A0, 0xEEFFDD);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x16A0]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x16A0]\n");
 
 	/* Get access to Channel b'10, Node b'1101, Register 0x13.
 	 * Write 24-bit value 0x071448 to register. Setting
@@ -170,7 +171,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x16A6, 0x071448);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x16A6]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x16A6]\n");
 
 	/* Get access to Channel b'10, Node b'1101, Register 0x12.
 	 * Write 24-bit value 0x13132F to register. Setting
@@ -178,7 +179,7 @@ static void lan88xx_confi