treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

91 files changed, 411 insertions, 411 deletions

diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig
index 7cc259893cb9..074b0974769c 100644
--- a/drivers/net/ethernet/3com/Kconfig
+++ b/drivers/net/ethernet/3com/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_3COM
 	bool "3Com devices"
 	default y
 	depends on ISA || EISA || PCI || PCMCIA
-	---help---
+	help
 	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_3COM
 config EL3
 	tristate "3c509/3c579 \"EtherLink III\" support"
 	depends on (ISA || EISA)
-	---help---
+	help
 	  If you have a network (Ethernet) card belonging to the 3Com
 	  EtherLinkIII series, say Y here.
 
@@ -34,7 +34,7 @@ config EL3
 config 3C515
 	tristate "3c515 ISA \"Fast EtherLink\""
 	depends on ISA && ISA_DMA_API && !PPC32
-	---help---
+	help
 	  If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
 	  network card, say Y here.
 
@@ -44,7 +44,7 @@ config 3C515
 config PCMCIA_3C574
 	tristate "3Com 3c574 PCMCIA support"
 	depends on PCMCIA
-	---help---
+	help
 	  Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
 	  (PC-card) Fast Ethernet card to your computer.
 
@@ -54,7 +54,7 @@ config PCMCIA_3C574
 config PCMCIA_3C589
 	tristate "3Com 3c589 PCMCIA support"
 	depends on PCMCIA
-	---help---
+	help
 	  Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
 	  (PC-card) Ethernet card to your computer.
 
@@ -65,7 +65,7 @@ config VORTEX
 	tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
 	depends on (PCI || EISA) && HAS_IOPORT_MAP
 	select MII
-	---help---
+	help
 	  This option enables driver support for a large number of 10Mbps and
 	  10/100Mbps EISA, PCI and Cardbus 3Com network cards:
 
@@ -86,7 +86,7 @@ config TYPHOON
 	tristate "3cr990 series \"Typhoon\" support"
 	depends on PCI
 	select CRC32
-	---help---
+	help
 	  This option enables driver support for the 3cr990 series of cards:
 
 	  3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index a9478577b495..9f4b302fd2ce 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_8390
 	bool "National Semiconductor 8390 devices"
 	default y
 	depends on NET_VENDOR_NATSEMI
-	---help---
+	help
 	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_8390
 config PCMCIA_AXNET
 	tristate "Asix AX88190 PCMCIA support"
 	depends on PCMCIA
-	---help---
+	help
 	  Say Y here if you intend to attach an Asix AX88190-based PCMCIA
 	  (PC-card) Fast Ethernet card to your computer.  These cards are
 	  nearly NE2000 compatible but need a separate driver due to a few
@@ -35,7 +35,7 @@ config AX88796
 	select CRC32
 	select PHYLIB
 	select MDIO_BITBANG
-	---help---
+	help
 	  AX88796 driver, using platform bus to provide
 	  chip detection and resources
 
@@ -43,7 +43,7 @@ config AX88796_93CX6
 	bool "ASIX AX88796 external 93CX6 eeprom support"
 	depends on AX88796
 	select EEPROM_93CX6
-	---help---
+	help
 	  Select this if your platform comes with an external 93CX6 eeprom.
 
 config XSURF100
@@ -63,7 +63,7 @@ config HYDRA
 	tristate "Hydra support"
 	depends on ZORRO
 	select CRC32
-	---help---
+	help
 	  If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
 
 	  To compile this driver as a module, choose M here: the module
@@ -73,7 +73,7 @@ config ARM_ETHERH
 	tristate "I-cubed EtherH/ANT EtherM support"
 	depends on ARM && ARCH_ACORN
 	select CRC32
-	---help---
+	help
 	  If you have an Acorn system with one of these network cards, you
 	  should say Y to this option if you wish to use it with Linux.
 
@@ -81,7 +81,7 @@ config MAC8390
 	tristate "Macintosh NS 8390 based ethernet cards"
 	depends on MAC
 	select CRC32
-	---help---
+	help
 	  If you want to include a driver to support Nubus or LC-PDS
 	  Ethernet cards using an NS8390 chipset or its equivalent, say Y.
 
@@ -89,7 +89,7 @@ config MCF8390
 	tristate "ColdFire NS8390 based Ethernet support"
 	depends on COLDFIRE
 	select CRC32
-	---help---
+	help
 	  This driver is for Ethernet devices using an NS8390-compatible
 	  chipset on many common ColdFire CPU based boards. Many of the older
 	  Freescale dev boards use this, and some other common boards like
@@ -103,7 +103,7 @@ config NE2000
 	tristate "NE2000/NE1000 support"
 	depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC)
 	select CRC32
-	---help---
+	help
 	  If you have a network (Ethernet) card of this type, say Y here.
 	  Many Ethernet cards without a specific driver are compatible with
 	  the NE2000.
@@ -118,7 +118,7 @@ config NE2K_PCI
 	tristate "PCI NE2000 and clones support (see help)"
 	depends on PCI
 	select CRC32
-	---help---
+	help
 	  This driver is for NE2000 compatible PCI cards. It will not work
 	  with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
 	  support" below). If you have a PCI NE2000 network (Ethernet) card,
@@ -136,7 +136,7 @@ config APNE
 	tristate "PCMCIA NE2000 support"
 	depends on AMIGA_PCMCIA
 	select CRC32
-	---help---
+	help
 	  If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
 	  say N.
 
@@ -147,7 +147,7 @@ config PCMCIA_PCNET
 	tristate "NE2000 compatible PCMCIA support"
 	depends on PCMCIA
 	select CRC32
-	---help---
+	help
 	  Say Y here if you intend to attach an NE2000 compatible PCMCIA
 	  (PC-card) Ethernet or Fast Ethernet card to your computer.
 
@@ -158,7 +158,7 @@ config STNIC
 	tristate "National DP83902AV  support"
 	depends on SUPERH
 	select CRC32
-	---help---
+	help
 	  Support for cards based on the National Semiconductor DP83902AV
 	  ST-NIC Serial Network Interface Controller for Twisted Pair.  This
 	  is a 10Mbit/sec Ethernet controller.  Product overview and specs at
@@ -170,7 +170,7 @@ config ULTRA
 	tristate "SMC Ultra support"
 	depends on ISA
 	select CRC32
-	---help---
+	help
 	  If you have a network (Ethernet) card of this type, say Y here.
 
 	  Important: There have been many reports that, with some motherboards
@@ -187,7 +187,7 @@ config WD80x3
 	tristate "WD80*3 support"
 	depends on ISA
 	select CRC32
-	---help---
+	help
 	  If you have a network (Ethernet) card of this type, say Y here.
 
 	  To compile this driver as a module, choose M here. The module
@@ -197,7 +197,7 @@ config ZORRO8390
 	tristate "Zorro NS8390-based Ethernet support"
 	depends on ZORRO
 	select CRC32
-	---help---
+	help
 	  This driver is for Zorro Ethernet cards using an NS8390-compatible
 	  chipset, like the Village Tronic Ariadne II and the Individual
 	  Computers X-Surf Ethernet cards. If you have such a card, say Y.
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 4ded81b27d0a..de50e8b9e656 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -7,7 +7,7 @@ menuconfig ETHERNET
 	bool "Ethernet driver support"
 	depends on NET
 	default y
-	---help---
+	help
 	  This section contains all the Ethernet device drivers.
 
 if ETHERNET
@@ -48,7 +48,7 @@ config CX_ECAT
 	tristate "Beckhoff CX5020 EtherCAT master support"
 	depends on PCI
 	depends on X86 || COMPILE_TEST
-	---help---
+	help
 	  Driver for EtherCAT master module located on CCAT FPGA
 	  that can be found on Beckhoff CX5020, and possibly other of CX
 	  Beckhoff CX series industrial PCs.
@@ -62,7 +62,7 @@ config DNET
 	tristate "Dave ethernet support (DNET)"
 	depends on HAS_IOMEM
 	select PHYLIB
-	---help---
+	help
 	  The Dave ethernet interface (DNET) is found on Qong Board FPGA.
 	  Say Y to include support for the DNET chip.
 
@@ -89,7 +89,7 @@ config JME
 	depends on PCI
 	select CRC32
 	select MII
-	---help---
+	help
 	  This driver supports the PCI-Express gigabit ethernet adapters
 	  based on JMicron JMC250 chipset.
 
@@ -99,20 +99,20 @@ config JME
 config KORINA
 	tristate "Korina (IDT RC32434) Ethernet support"
 	depends on MIKROTIK_RB532
-	---help---
+	help
 	  If you have a Mikrotik RouterBoard 500 or IDT RC32434
 	  based system say Y. Otherwise say N.
 
 config LANTIQ_ETOP
 	tristate "Lantiq SoC ETOP driver"
 	depends on SOC_TYPE_XWAY
-	---help---
+	help
 	  Support for the MII0 inside the Lantiq SoC
 
 config LANTIQ_XRX200
 	tristate "Lantiq / Intel xRX200 PMAC network driver"
 	depends on SOC_TYPE_XWAY
-	---help---
+	help
 	  Support for the PMAC of the Gigabit switch (GSWIP) inside the
 	  Lantiq / Intel VRX200 VDSL SoC
 
@@ -130,7 +130,7 @@ config FEALNX
 	depends on PCI
 	select CRC32
 	select MII
-	---help---
+	help
 	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
 	  cards. <http://www.myson.com.tw/>
 
@@ -150,7 +150,7 @@ config ETHOC
 	select PHYLIB
 	select CRC32
 	select BITREVERSE
-	---help---
+	help
 	  Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
 
 source "drivers/net/ethernet/packetengines/Kconfig"
diff --git a/drivers/net/ethernet/adaptec/Kconfig b/drivers/net/ethernet/adaptec/Kconfig
index 86e02da4f993..c96edc2e582f 100644
--- a/drivers/net/ethernet/adaptec/Kconfig
+++ b/drivers/net/ethernet/adaptec/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_ADAPTEC
 	bool "Adaptec devices"
 	default y
 	depends on PCI
-	---help---
+	help
 	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
@@ -22,7 +22,7 @@ config ADAPTEC_STARFIRE
 	depends on PCI
 	select CRC32
 	select MII
-	---help---
+	help
 	  Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
 	  adapter. The DuraLAN chip is used on the 64 bit PCI boards from
 	  Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
diff --git a/drivers/net/ethernet/aeroflex/Kconfig b/drivers/net/ethernet/aeroflex/Kconfig
index 2fa0a317266b..ea4be67f787b 100644
--- a/drivers/net/ethernet/aeroflex/Kconfig
+++ b/drivers/net/ethernet/aeroflex/Kconfig
@@ -8,5 +8,5 @@ config GRETH
 	depends on SPARC
 	select PHYLIB
 	select CRC32
-	---help---
+	help
 	  Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC.
diff --git a/drivers/net/ethernet/agere/Kconfig b/drivers/net/ethernet/agere/Kconfig
index 084c7190ce2f..d92516ae59cc 100644
--- a/drivers/net/ethernet/agere/Kconfig
+++ b/drivers/net/ethernet/agere/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_AGERE
 	bool "Agere devices"
 	default y
 	depends on PCI
-	---help---
+	help
 	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config ET131X
 	tristate "Agere ET-1310 Gigabit Eth