net: stmmac: Set DMA buffer size in HW

This is clearly a bug.

We need to set the DMA buffer size in the HW otherwise corruption can
occur when receiving packets.

This is probably not occuring because of small MTU values and because HW
has a default value internally (which currently is bigger than default
buffer size).

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 12 insertions, 0 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index d37f17ca62fe..65bc3556bd8f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -407,6 +407,16 @@ static void dwmac4_enable_tso(void __iomem *ioaddr, bool en, u32 chan)
 	}
 }
 
+static void dwmac4_set_bfsize(void __iomem *ioaddr, int bfsize, u32 chan)
+{
+	u32 value = readl(ioaddr + DMA_CHAN_RX_CONTROL(chan));
+
+	value &= ~DMA_RBSZ_MASK;
+	value |= (bfsize << DMA_RBSZ_SHIFT) & DMA_RBSZ_MASK;
+
+	writel(value, ioaddr + DMA_CHAN_RX_CONTROL(chan));
+}
+
 const struct stmmac_dma_ops dwmac4_dma_ops = {
 	.reset = dwmac4_dma_reset,
 	.init = dwmac4_dma_init,
@@ -431,6 +441,7 @@ const struct stmmac_dma_ops dwmac4_dma_ops = {
 	.set_rx_tail_ptr = dwmac4_set_rx_tail_ptr,
 	.set_tx_tail_ptr = dwmac4_set_tx_tail_ptr,
 	.enable_tso = dwmac4_enable_tso,
+	.set_bfsize = dwmac4_set_bfsize,
 };
 
 const struct stmmac_dma_ops dwmac410_dma_ops = {
@@ -457,4 +468,5 @@ const struct stmmac_dma_ops dwmac410_dma_ops = {
 	.set_rx_tail_ptr = dwmac4_set_rx_tail_ptr,
 	.set_tx_tail_ptr = dwmac4_set_tx_tail_ptr,
 	.enable_tso = dwmac4_enable_tso,
+	.set_bfsize = dwmac4_set_bfsize,
 };