diff options
author | Alex Maftei (amaftei) <amaftei@solarflare.com> | 2020-01-08 16:11:46 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2020-01-08 13:28:02 -0800 |
commit | 1eaf99fe0bb836c988b40c32d48d59aea29cd717 (patch) | |
tree | add1d6b9abf2b52bdddf15052e3b0d9fb3607b3b /drivers/net/ethernet/sfc | |
parent | 7ec3de426014a0fff8f2fe1a3f5a7be08e416903 (diff) |
sfc: move some device reset code
The rest of the reset code will be moved later.
Small code styling fixes included.
Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/sfc')
-rw-r--r-- | drivers/net/ethernet/sfc/efx.c | 227 | ||||
-rw-r--r-- | drivers/net/ethernet/sfc/efx_common.c | 237 |
2 files changed, 237 insertions, 227 deletions
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 988687a80abe..40d1e8ef672d 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -2483,184 +2483,6 @@ static void efx_unregister_netdev(struct efx_nic *efx) * **************************************************************************/ -/* Tears down the entire software state and most of the hardware state - * before reset. */ -void efx_reset_down(struct efx_nic *efx, enum reset_type method) -{ - EFX_ASSERT_RESET_SERIALISED(efx); - - if (method == RESET_TYPE_MCDI_TIMEOUT) - efx->type->prepare_flr(efx); - - efx_stop_all(efx); - efx_disable_interrupts(efx); - - mutex_lock(&efx->mac_lock); - down_write(&efx->filter_sem); - mutex_lock(&efx->rss_lock); - if (efx->port_initialized && method != RESET_TYPE_INVISIBLE && - method != RESET_TYPE_DATAPATH) - efx->phy_op->fini(efx); - efx->type->fini(efx); -} - -/* This function will always ensure that the locks acquired in - * efx_reset_down() are released. A failure return code indicates - * that we were unable to reinitialise the hardware, and the - * driver should be disabled. If ok is false, then the rx and tx - * engines are not restarted, pending a RESET_DISABLE. */ -int efx_reset_up(struct efx_nic *efx, enum reset_type method, bool ok) -{ - int rc; - - EFX_ASSERT_RESET_SERIALISED(efx); - - if (method == RESET_TYPE_MCDI_TIMEOUT) - efx->type->finish_flr(efx); - - /* Ensure that SRAM is initialised even if we're disabling the device */ - rc = efx->type->init(efx); - if (rc) { - netif_err(efx, drv, efx->net_dev, "failed to initialise NIC\n"); - goto fail; - } - - if (!ok) - goto fail; - - if (efx->port_initialized && method != RESET_TYPE_INVISIBLE && - method != RESET_TYPE_DATAPATH) { - rc = efx->phy_op->init(efx); - if (rc) - goto fail; - rc = efx->phy_op->reconfigure(efx); - if (rc && rc != -EPERM) - netif_err(efx, drv, efx->net_dev, - "could not restore PHY settings\n"); - } - - rc = efx_enable_interrupts(efx); - if (rc) - goto fail; - -#ifdef CONFIG_SFC_SRIOV - rc = efx->type->vswitching_restore(efx); - if (rc) /* not fatal; the PF will still work fine */ - netif_warn(efx, probe, efx->net_dev, - "failed to restore vswitching rc=%d;" - " VFs may not function\n", rc); -#endif - - if (efx->type->rx_restore_rss_contexts) - efx->type->rx_restore_rss_contexts(efx); - mutex_unlock(&efx->rss_lock); - efx->type->filter_table_restore(efx); - up_write(&efx->filter_sem); - if (efx->type->sriov_reset) - efx->type->sriov_reset(efx); - - mutex_unlock(&efx->mac_lock); - - efx_start_all(efx); - - if (efx->type->udp_tnl_push_ports) - efx->type->udp_tnl_push_ports(efx); - - return 0; - -fail: - efx->port_initialized = false; - - mutex_unlock(&efx->rss_lock); - up_write(&efx->filter_sem); - mutex_unlock(&efx->mac_lock); - - return rc; -} - -/* Reset the NIC using the specified method. Note that the reset may - * fail, in which case the card will be left in an unusable state. - * - * Caller must hold the rtnl_lock. - */ -int efx_reset(struct efx_nic *efx, enum reset_type method) -{ - int rc, rc2; - bool disabled; - - netif_info(efx, drv, efx->net_dev, "resetting (%s)\n", - RESET_TYPE(method)); - - efx_device_detach_sync(efx); - efx_reset_down(efx, method); - - rc = efx->type->reset(efx, method); - if (rc) { - netif_err(efx, drv, efx->net_dev, "failed to reset hardware\n"); - goto out; - } - - /* Clear flags for the scopes we covered. We assume the NIC and - * driver are now quiescent so that there is no race here. - */ - if (method < RESET_TYPE_MAX_METHOD) - efx->reset_pending &= -(1 << (method + 1)); - else /* it doesn't fit into the well-ordered scope hierarchy */ - __clear_bit(method, &efx->reset_pending); - - /* Reinitialise bus-mastering, which may have been turned off before - * the reset was scheduled. This is still appropriate, even in the - * RESET_TYPE_DISABLE since this driver generally assumes the hardware - * can respond to requests. */ - pci_set_master(efx->pci_dev); - -out: - /* Leave device stopped if necessary */ - disabled = rc || - method == RESET_TYPE_DISABLE || - method == RESET_TYPE_RECOVER_OR_DISABLE; - rc2 = efx_reset_up(efx, method, !disabled); - if (rc2) { - disabled = true; - if (!rc) - rc = rc2; - } - - if (disabled) { - dev_close(efx->net_dev); - netif_err(efx, drv, efx->net_dev, "has been disabled\n"); - efx->state = STATE_DISABLED; - } else { - netif_dbg(efx, drv, efx->net_dev, "reset complete\n"); - efx_device_attach_if_not_resetting(efx); - } - return rc; -} - -/* Try recovery mechanisms. - * For now only EEH is supported. - * Returns 0 if the recovery mechanisms are unsuccessful. - * Returns a non-zero value otherwise. - */ -int efx_try_recovery(struct efx_nic *efx) -{ -#ifdef CONFIG_EEH - /* A PCI error can occur and not be seen by EEH because nothing - * happens on the PCI bus. In this case the driver may fail and - * schedule a 'recover or reset', leading to this recovery handler. - * Manually call the eeh failure check function. - */ - struct eeh_dev *eehdev = pci_dev_to_eeh_dev(efx->pci_dev); - if (eeh_dev_check_failure(eehdev)) { - /* The EEH mechanisms will handle the error and reset the - * device if necessary. - */ - return 1; - } -#endif - return 0; -} - static void efx_wait_for_bist_end(struct efx_nic *efx) { int i; @@ -2714,55 +2536,6 @@ static void efx_reset_work(struct work_struct *data) rtnl_unlock(); } -void efx_schedule_reset(struct efx_nic *efx, enum reset_type type) -{ - enum reset_type method; - - if (efx->state == STATE_RECOVERY) { - netif_dbg(efx, drv, efx->net_dev, - "recovering: skip scheduling %s reset\n", - RESET_TYPE(type)); - return; - } - - switch (type) { - case RESET_TYPE_INVISIBLE: - case RESET_TYPE_ALL: - case RESET_TYPE_RECOVER_OR_ALL: - case RESET_TYPE_WORLD: - case RESET_TYPE_DISABLE: - case RESET_TYPE_RECOVER_OR_DISABLE: - case RESET_TYPE_DATAPATH: - case RESET_TYPE_MC_BIST: - case RESET_TYPE_MCDI_TIMEOUT: - method = type; - netif_dbg(efx, drv, efx->net_dev, "scheduling %s reset\n", - RESET_TYPE(method)); - break; - default: - method = efx->type->map_reset_reason(type); - netif_dbg(efx, drv, efx->net_dev, - "scheduling %s reset for %s\n", - RESET_TYPE(method), RESET_TYPE(type)); - break; - } - - set_bit(method, &efx->reset_pending); - smp_mb(); /* ensure we change reset_pending before checking state */ - - /* If we're not READY then just leave the flags set as the cue - * to abort probing or reschedule the reset later. - */ - if (READ_ONCE(efx->state) != STATE_READY) - return; - - /* efx_process_channel() will no longer read events once a - * reset is scheduled. So switch back to poll'd MCDI completions. */ - efx_mcdi_mode_poll(efx); - - efx_queue_reset_work(efx); -} - /************************************************************************** * * List of NICs we support diff --git a/drivers/net/ethernet/sfc/efx_common.c b/drivers/net/ethernet/sfc/efx_common.c index 445340c903b1..813ebdda50f6 100644 --- a/drivers/net/ethernet/sfc/efx_common.c +++ b/drivers/net/ethernet/sfc/efx_common.c @@ -429,3 +429,240 @@ int efx_reconfigure_port(struct efx_nic *efx) return rc; } + +/************************************************************************** + * + * Device reset and suspend + * + **************************************************************************/ + +/* Try recovery mechanisms. + * For now only EEH is supported. + * Returns 0 if the recovery mechanisms are unsuccessful. + * Returns a non-zero value otherwise. + */ +int efx_try_recovery(struct efx_nic *efx) +{ +#ifdef CONFIG_EEH + /* A PCI error can occur and not be seen by EEH because nothing + * happens on the PCI bus. In this case the driver may fail and + * schedule a 'recover or reset', leading to this recovery handler. + * Manually call the eeh failure check function. + */ + struct eeh_dev *eehdev = pci_dev_to_eeh_dev(efx->pci_dev); + if (eeh_dev_check_failure(eehdev)) { + /* The EEH mechanisms will handle the error and reset the + * device if necessary. + */ + return 1; + } +#endif + return 0; +} + +/* Tears down the entire software state and most of the hardware state + * before reset. + */ +void efx_reset_down(struct efx_nic *efx, enum reset_type method) +{ + EFX_ASSERT_RESET_SERIALISED(efx); + + if (method == RESET_TYPE_MCDI_TIMEOUT) + efx->type->prepare_flr(efx); + + efx_stop_all(efx); + efx_disable_interrupts(efx); + + mutex_lock(&efx->mac_lock); + down_write(&efx->filter_sem); + mutex_lock(&efx->rss_lock); + if (efx->port_initialized && method != RESET_TYPE_INVISIBLE && + method != RESET_TYPE_DATAPATH) + efx->phy_op->fini(efx); + efx->type->fini(efx); +} + +/* This function will always ensure that the locks acquired in + * efx_reset_down() are released. A failure return code indicates + * that we were unable to reinitialise the hardware, and the + * driver should be disabled. If ok is false, then the rx and tx + * engines are not restarted, pending a RESET_DISABLE. + */ +int efx_reset_up(struct efx_nic *efx, enum reset_type method, bool ok) +{ + int rc; + + EFX_ASSERT_RESET_SERIALISED(efx); + + if (method == RESET_TYPE_MCDI_TIMEOUT) + efx->type->finish_flr(efx); + + /* Ensure that SRAM is initialised even if we're disabling the device */ + rc = efx->type->init(efx); + if (rc) { + netif_err(efx, drv, efx->net_dev, "failed to initialise NIC\n"); + goto fail; + } + + if (!ok) + goto fail; + + if (efx->port_initialized && method != RESET_TYPE_INVISIBLE && + method != RESET_TYPE_DATAPATH) { + rc = efx->phy_op->init(efx); + if (rc) + goto fail; + rc = efx->phy_op->reconfigure(efx); + if (rc && rc != -EPERM) + netif_err(efx, drv, efx->net_dev, + "could not restore PHY settings\n"); + } + + rc = efx_enable_interrupts(efx); + if (rc) + goto fail; + +#ifdef CONFIG_SFC_SRIOV + rc = efx->type->vswitching_restore(efx); + if (rc) /* not fatal; the PF will still work fine */ + netif_warn(efx, probe, efx->net_dev, + "failed to restore vswitching rc=%d;" + " VFs may not function\n", rc); +#endif + + if (efx->type->rx_restore_rss_contexts) + efx->type->rx_restore_rss_contexts(efx); + mutex_unlock(&efx->rss_lock); + efx->type->filter_table_restore(efx); + up_write(&efx->filter_sem); + if (efx->type->sriov_reset) + efx->type->sriov_reset(efx); + + mutex_unlock(&efx->mac_lock); + + efx_start_all(efx); + + if (efx->type->udp_tnl_push_ports) + efx->type->udp_tnl_push_ports(efx); + + return 0; + +fail: + efx->port_initialized = false; + + mutex_unlock(&efx->rss_lock); + up_write(&efx->filter_sem); + mutex_unlock(&efx->mac_lock); + + return rc; +} + +/* Reset the NIC using the specified method. Note that the reset may + * fail, in which case the card will be left in an unusable state. + * + * Caller must hold the rtnl_lock. + */ +int efx_reset(struct efx_nic *efx, enum reset_type method) +{ + bool disabled; + int rc, rc2; + + netif_info(efx, drv, efx->net_dev, "resetting (%s)\n", + RESET_TYPE(method)); + + efx_device_detach_sync(efx); + efx_reset_down(efx, method); + + rc = efx->type->reset(efx, method); + if (rc) { + netif_err(efx, drv, efx->net_dev, "failed to reset hardware\n"); + goto out; + } + + /* Clear flags for the scopes we covered. We assume the NIC and + * driver are now quiescent so that there is no race here. + */ + if (method < RESET_TYPE_MAX_METHOD) + efx->reset_pending &= -(1 << (method + 1)); + else /* it doesn't fit into the well-ordered scope hierarchy */ + __clear_bit(method, &efx->reset_pending); + + /* Reinitialise bus-mastering, which may have been turned off before + * the reset was scheduled. This is still appropriate, even in the + * RESET_TYPE_DISABLE since this driver generally assumes the hardware + * can respond to requests. + */ + pci_set_master(efx->pci_dev); + +out: + /* Leave device stopped if necessary */ + disabled = rc || + method == RESET_TYPE_DISABLE || + method == RESET_TYPE_RECOVER_OR_DISABLE; + rc2 = efx_reset_up(efx, method, !disabled); + if (rc2) { + disabled = true; + if (!rc) + rc = rc2; + } + + if (disabled) { + dev_close(efx->net_dev); + netif_err(efx, drv, efx->net_dev, "has been disabled\n"); + efx->state = STATE_DISABLED; + } else { + netif_dbg(efx, drv, efx->net_dev, "reset complete\n"); + efx_device_attach_if_not_resetting(efx); + } + return rc; +} + +void efx_schedule_reset(struct efx_nic *efx, enum reset_type type) +{ + enum reset_type method; + + if (efx->state == STATE_RECOVERY) { + netif_dbg(efx, drv, efx->net_dev, + "recovering: skip scheduling %s reset\n", + RESET_TYPE(type)); + return; + } + + switch (type) { + case RESET_TYPE_INVISIBLE: + case RESET_TYPE_ALL: + case RESET_TYPE_RECOVER_OR_ALL: + case RESET_TYPE_WORLD: + case RESET_TYPE_DISABLE: + case RESET_TYPE_RECOVER_OR_DISABLE: + case RESET_TYPE_DATAPATH: + case RESET_TYPE_MC_BIST: + case RESET_TYPE_MCDI_TIMEOUT: + method = type; + netif_dbg(efx, drv, efx->net_dev, "scheduling %s reset\n", + RESET_TYPE(method)); + break; + default: + method = efx->type->map_reset_reason(type); + netif_dbg(efx, drv, efx->net_dev, + "scheduling %s reset for %s\n", + RESET_TYPE(method), RESET_TYPE(type)); + break; + } + + set_bit(method, &efx->reset_pending); + smp_mb(); /* ensure we change reset_pending before checking state */ + + /* If we're not READY then just leave the flags set as the cue + * to abort probing or reschedule the reset later. + */ + if (READ_ONCE(efx->state) != STATE_READY) + return; + + /* efx_process_channel() will no longer read events once a + * reset is scheduled. So switch back to poll'd MCDI completions. + */ + efx_mcdi_mode_poll(efx); + + efx_queue_reset_work(efx); +} |