diff options
author | Arkadi Sharshevsky <arkadis@mellanox.com> | 2017-06-14 09:27:39 +0200 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2017-06-14 15:16:30 -0400 |
commit | 7ca36994a3479e6d9d81baba34a426c47691ea08 (patch) | |
tree | b20c8f7b3d75bf7a342cb16134c399b65f73a953 /drivers/net/ethernet/mellanox/mlxsw/reg.h | |
parent | 4071bd88cca7bc4ebb6143c6015f9b255b3d4cfc (diff) |
mlxsw: reg: Add MCIA register for cable info access
The MCIA register is used to access the SFP+ and QSFP connector's
EPROM. It will be used to query the cable info.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/mellanox/mlxsw/reg.h')
-rw-r--r-- | drivers/net/ethernet/mellanox/mlxsw/reg.h | 76 |
1 files changed, 76 insertions, 0 deletions
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index 157b9b6f8485..1bd34d9a7b9e 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -5491,6 +5491,81 @@ static inline void mlxsw_reg_mtmp_unpack(char *payload, unsigned int *p_temp, mlxsw_reg_mtmp_sensor_name_memcpy_from(payload, sensor_name); } +/* MCIA - Management Cable Info Access + * ----------------------------------- + * MCIA register is used to access the SFP+ and QSFP connector's EPROM. + */ + +#define MLXSW_REG_MCIA_ID 0x9014 +#define MLXSW_REG_MCIA_LEN 0x40 + +MLXSW_REG_DEFINE(mcia, MLXSW_REG_MCIA_ID, MLXSW_REG_MCIA_LEN); + +/* reg_mcia_l + * Lock bit. Setting this bit will lock the access to the specific + * cable. Used for updating a full page in a cable EPROM. Any access + * other then subsequence writes will fail while the port is locked. + * Access: RW + */ +MLXSW_ITEM32(reg, mcia, l, 0x00, 31, 1); + +/* reg_mcia_module + * Module number. + * Access: Index + */ +MLXSW_ITEM32(reg, mcia, module, 0x00, 16, 8); + +/* reg_mcia_status + * Module status. + * Access: RO + */ +MLXSW_ITEM32(reg, mcia, status, 0x00, 0, 8); + +/* reg_mcia_i2c_device_address + * I2C device address. + * Access: RW + */ +MLXSW_ITEM32(reg, mcia, i2c_device_address, 0x04, 24, 8); + +/* reg_mcia_page_number + * Page number. + * Access: RW + */ +MLXSW_ITEM32(reg, mcia, page_number, 0x04, 16, 8); + +/* reg_mcia_device_address + * Device address. + * Access: RW + */ +MLXSW_ITEM32(reg, mcia, device_address, 0x04, 0, 16); + +/* reg_mcia_size + * Number of bytes to read/write (up to 48 bytes). + * Access: RW + */ +MLXSW_ITEM32(reg, mcia, size, 0x08, 0, 16); + +#define MLXSW_SP_REG_MCIA_EEPROM_SIZE 48 + +/* reg_mcia_eeprom + * Bytes to read/write. + * Access: RW + */ +MLXSW_ITEM_BUF(reg, mcia, eeprom, 0x10, MLXSW_SP_REG_MCIA_EEPROM_SIZE); + +static inline void mlxsw_reg_mcia_pack(char *payload, u8 module, u8 lock, + u8 page_number, u16 device_addr, + u8 size, u8 i2c_device_addr) +{ + MLXSW_REG_ZERO(mcia, payload); + mlxsw_reg_mcia_module_set(payload, module); + mlxsw_reg_mcia_l_set(payload, lock); + mlxsw_reg_mcia_page_number_set(payload, page_number); + mlxsw_reg_mcia_device_address_set(payload, device_addr); + mlxsw_reg_mcia_size_set(payload, size); + mlxsw_reg_mcia_i2c_device_address_set(payload, i2c_device_addr); +} + /* MPAT - Monitoring Port Analyzer Table * ------------------------------------- * MPAT Register is used to query and configure the Switch PortAnalyzer Table. @@ -6433,6 +6508,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = { MLXSW_REG(mfsl), MLXSW_REG(mtcap), MLXSW_REG(mtmp), + MLXSW_REG(mcia), MLXSW_REG(mpat), MLXSW_REG(mpar), MLXSW_REG(mlcr), |