summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-01-08 20:21:39 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2018-01-08 20:21:39 -0800
commitef7f8cec80a0ba7bd00ece46844c8994117dc910 (patch)
treecad0349b7cb759b6e165eb11961007262b284462 /drivers/net/ethernet/intel
parent44596f86826df00ab3ab1086b25f3cdcc11156a1 (diff)
parent50f3d740d376f664f6accc7e86c9afd8f1c7e1e4 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller: 1) Frag and UDP handling fixes in i40e driver, from Amritha Nambiar and Alexander Duyck. 2) Undo unintentional UAPI change in netfilter conntrack, from Florian Westphal. 3) Revert a change to how error codes are returned from dev_get_valid_name(), it broke some apps. 4) Cannot cache routes for ipv6 tunnels in the tunnel is ipv4/ipv6 dual-stack. From Eli Cooper. 5) Fix missed PMTU updates in geneve, from Xin Long. 6) Cure double free in macvlan, from Gao Feng. 7) Fix heap out-of-bounds write in rds_message_alloc_sgs(), from Mohamed Ghannam. 8) FEC bug fixes from FUgang Duan (mis-accounting of dev_id, missed deferral of probe when the regulator is not ready yet). 9) Missing DMA mapping error checks in 3c59x, from Neil Horman. 10) Turn off Broadcom tags for some b53 switches, from Florian Fainelli. 11) Fix OOPS when get_target_net() is passed an SKB whose NETLINK_CB() isn't initialized. From Andrei Vagin. 12) Fix crashes in fib6_add(), from Wei Wang. 13) PMTU bug fixes in SCTP from Marcelo Ricardo Leitner. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits) sh_eth: fix TXALCR1 offsets mdio-sun4i: Fix a memory leak phylink: mark expected switch fall-throughs in phylink_mii_ioctl sctp: fix the handling of ICMP Frag Needed for too small MTUs sctp: do not retransmit upon FragNeeded if PMTU discovery is disabled xen-netfront: enable device after manual module load bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine. bnxt_en: Fix population of flow_type in bnxt_hwrm_cfa_flow_alloc() sh_eth: fix SH7757 GEther initialization net: fec: free/restore resource in related probe error pathes uapi/if_ether.h: prevent redefinition of struct ethhdr ipv6: fix general protection fault in fib6_add() RDS: null pointer dereference in rds_atomic_free_op sh_eth: fix TSU resource handling net: stmmac: enable EEE in MII, GMII or RGMII only rtnetlink: give a user socket to get_target_net() MAINTAINERS: Update my email address. can: ems_usb: improve error reporting for error warning and error passive can: flex_can: Correct the checking for frame length in flexcan_start_xmit() can: gs_usb: fix return value of the "set_bittiming" callback ...
Diffstat (limited to 'drivers/net/ethernet/intel')
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000.h3
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_main.c27
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.c11
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_main.c37
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_txrx.c26
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_txrx.c26
6 files changed, 104 insertions, 26 deletions
diff --git a/drivers/net/ethernet/intel/e1000/e1000.h b/drivers/net/ethernet/intel/e1000/e1000.h
index d7bdea79e9fa..8fd2458060a0 100644
--- a/drivers/net/ethernet/intel/e1000/e1000.h
+++ b/drivers/net/ethernet/intel/e1000/e1000.h
@@ -331,7 +331,8 @@ struct e1000_adapter {
enum e1000_state_t {
__E1000_TESTING,
__E1000_RESETTING,
- __E1000_DOWN
+ __E1000_DOWN,
+ __E1000_DISABLED
};
#undef pr_fmt
diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 1982f7917a8d..3dd4aeb2706d 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -945,7 +945,7 @@ static int e1000_init_hw_struct(struct e1000_adapter *adapter,
static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct net_device *netdev;
- struct e1000_adapter *adapter;
+ struct e1000_adapter *adapter = NULL;
struct e1000_hw *hw;
static int cards_found;
@@ -955,6 +955,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
u16 tmp = 0;
u16 eeprom_apme_mask = E1000_EEPROM_APME;
int bars, need_ioport;
+ bool disable_dev = false;
/* do not allocate ioport bars when not needed */
need_ioport = e1000_is_need_ioport(pdev);
@@ -1259,11 +1260,13 @@ err_mdio_ioremap:
iounmap(hw->ce4100_gbe_mdio_base_virt);
iounmap(hw->hw_addr);
err_ioremap:
+ disable_dev = !test_and_set_bit(__E1000_DISABLED, &adapter->flags);
free_netdev(netdev);
err_alloc_etherdev:
pci_release_selected_regions(pdev, bars);
err_pci_reg:
- pci_disable_device(pdev);
+ if (!adapter || disable_dev)
+ pci_disable_device(pdev);
return err;
}
@@ -1281,6 +1284,7 @@ static void e1000_remove(struct pci_dev *pdev)
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ bool disable_dev;
e1000_down_and_stop(adapter);
e1000_release_manageability(adapter);
@@ -1299,9 +1303,11 @@ static void e1000_remove(struct pci_dev *pdev)
iounmap(hw->flash_address);
pci_release_selected_regions(pdev, adapter->bars);
+ disable_dev = !test_and_set_bit(__E1000_DISABLED, &adapter->flags);
free_netdev(netdev);
- pci_disable_device(pdev);
+ if (disable_dev)
+ pci_disable_device(pdev);
}
/**
@@ -5156,7 +5162,8 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
if (netif_running(netdev))
e1000_free_irq(adapter);
- pci_disable_device(pdev);
+ if (!test_and_set_bit(__E1000_DISABLED, &adapter->flags))
+ pci_disable_device(pdev);
return 0;
}
@@ -5200,6 +5207,10 @@ static int e1000_resume(struct pci_dev *pdev)
pr_err("Cannot enable PCI device from suspend\n");
return err;
}
+
+ /* flush memory to make sure state is correct */
+ smp_mb__before_atomic();
+ clear_bit(__E1000_DISABLED, &adapter->flags);
pci_set_master(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
@@ -5274,7 +5285,9 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
if (netif_running(netdev))
e1000_down(adapter);
- pci_disable_device(pdev);
+
+ if (!test_and_set_bit(__E1000_DISABLED, &adapter->flags))
+ pci_disable_device(pdev);
/* Request a slot slot reset. */
return PCI_ERS_RESULT_NEED_RESET;
@@ -5302,6 +5315,10 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
pr_err("Cannot re-enable PCI device after reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
}
+
+ /* flush memory to make sure state is correct */
+ smp_mb__before_atomic();
+ clear_bit(__E1000_DISABLED, &adapter->flags);
pci_set_master(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index d6d4ed7acf03..31277d3bb7dc 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1367,6 +1367,9 @@ out:
* Checks to see of the link status of the hardware has changed. If a
* change in link status has been detected, then we read the PHY registers
* to get the current speed/duplex if link exists.
+ *
+ * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link
+ * up).
**/
static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
{
@@ -1382,7 +1385,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
* Change or Rx Sequence Error interrupt.
*/
if (!mac->get_link_status)
- return 0;
+ return 1;
/* First we want to see if the MII Status Register reports
* link. If so, then we want to get the current speed/duplex
@@ -1613,10 +1616,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
* different link partner.
*/
ret_val = e1000e_config_fc_after_link_up(hw);
- if (ret_val)
+ if (ret_val) {
e_dbg("Error configuring flow control\n");
+ return ret_val;
+ }
- return ret_val;
+ return 1;
}
static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 321d8be80871..42dcaefc4c19 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1573,11 +1573,18 @@ static int i40e_set_mac(struct net_device *netdev, void *p)
else
netdev_info(netdev, "set new mac address %pM\n", addr->sa_data);
+ /* Copy the address first, so that we avoid a possible race with
+ * .set_rx_mode(). If we copy after changing the address in the filter
+ * list, we might open ourselves to a narrow race window where
+ * .set_rx_mode could delete our dev_addr filter and prevent traffic
+ * from passing.
+ */
+ ether_addr_copy(netdev->dev_addr, addr->sa_data);
+
spin_lock_bh(&vsi->mac_filter_hash_lock);
i40e_del_mac_filter(vsi, netdev->dev_addr);
i40e_add_mac_filter(vsi, addr->sa_data);
spin_unlock_bh(&vsi->mac_filter_hash_lock);
- ether_addr_copy(netdev->dev_addr, addr->sa_data);
if (vsi->type == I40E_VSI_MAIN) {
i40e_status ret;
@@ -1923,6 +1930,14 @@ static int i40e_addr_unsync(struct net_device *netdev, const u8 *addr)
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
+ /* Under some circumstances, we might receive a request to delete
+ * our own device address from our uc list. Because we store the
+ * device address in the VSI's MAC/VLAN filter list, we need to ignore
+ * such requests and not delete our device address from this list.
+ */
+ if (ether_addr_equal(addr, netdev->dev_addr))
+ return 0;
+
i40e_del_mac_filter(vsi, addr);
return 0;
@@ -6038,8 +6053,8 @@ static int i40e_validate_and_set_switch_mode(struct i40e_vsi *vsi)
/* Set Bit 7 to be valid */
mode = I40E_AQ_SET_SWITCH_BIT7_VALID;
- /* Set L4type to both TCP and UDP support */
- mode |= I40E_AQ_SET_SWITCH_L4_TYPE_BOTH;
+ /* Set L4type for TCP support */
+ mode |= I40E_AQ_SET_SWITCH_L4_TYPE_TCP;
/* Set cloud filter mode */
mode |= I40E_AQ_SET_SWITCH_MODE_NON_TUNNEL;
@@ -6969,18 +6984,18 @@ static int i40e_add_del_cloud_filter_big_buf(struct i40e_vsi *vsi,
is_valid_ether_addr(filter->src_mac)) ||
(is_multicast_ether_addr(filter->dst_mac) &&
is_multicast_ether_addr(filter->src_mac)))
- return -EINVAL;
+ return -EOPNOTSUPP;
- /* Make sure port is specified, otherwise bail out, for channel
- * specific cloud filter needs 'L4 port' to be non-zero
+ /* Big buffer cloud filter needs 'L4 port' to be non-zero. Also, UDP
+ * ports are not supported via big buffer now.
*/
- if (!filter->dst_port)
- return -EINVAL;
+ if (!filter->dst_port || filter->ip_proto == IPPROTO_UDP)
+ return -EOPNOTSUPP;
/* adding filter using src_port/src_ip is not supported at this stage */
if (filter->src_port || filter->src_ipv4 ||
!ipv6_addr_any(&filter->ip.v6.src_ip6))
- return -EINVAL;
+ return -EOPNOTSUPP;
/* copy element needed to add cloud filter from filter */
i40e_set_cld_element(filter, &cld_filter.element);
@@ -6991,7 +7006,7 @@ static int i40e_add_del_cloud_filter_big_buf(struct i40e_vsi *vsi,
is_multicast_ether_addr(filter->src_mac)) {
/* MAC + IP : unsupported mode */
if (filter->dst_ipv4)
- return -EINVAL;
+ return -EOPNOTSUPP;
/* since we validated that L4 port must be valid before
* we get here, start with respective "flags" value
@@ -7356,7 +7371,7 @@ static int i40e_configure_clsflower(struct i40e_vsi *vsi,
if (tc < 0) {
dev_err(&vsi->back->pdev->dev, "Invalid traffic class\n");
- return -EINVAL;
+ return -EOPNOTSUPP;
}
if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) ||
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 4566d66ffc7c..5bc2748ac468 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -3047,10 +3047,30 @@ bool __i40e_chk_linearize(struct sk_buff *skb)
/* Walk through fragments adding latest fragment, testing it, and
* then removing stale fragments from the sum.
*/
- stale = &skb_shinfo(skb)->frags[0];
- for (;;) {
+ for (stale = &skb_shinfo(skb)->frags[0];; stale++) {
+ int stale_size = skb_frag_size(stale);
+
sum += skb_frag_size(frag++);
+ /* The stale fragment may present us with a smaller
+ * descriptor than the actual fragment size. To account
+ * for that we need to remove all the data on the front and
+ * figure out what the remainder would be in the last
+ * descriptor associated with the fragment.
+ */
+ if (stale_size > I40E_MAX_DATA_PER_TXD) {
+ int align_pad = -(stale->page_offset) &
+ (I40E_MAX_READ_REQ_SIZE - 1);
+
+ sum -= align_pad;
+ stale_size -= align_pad;
+
+ do {
+ sum -= I40E_MAX_DATA_PER_TXD_ALIGNED;
+ stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED;
+ } while (stale_size > I40E_MAX_DATA_PER_TXD);
+ }
+
/* if sum is negative we failed to make sufficient progress */
if (sum < 0)
return true;
@@ -3058,7 +3078,7 @@ bool __i40e_chk_linearize(struct sk_buff *skb)
if (!nr_frags--)
break;
- sum -= skb_frag_size(stale++);
+ sum -= stale_size;
}
return false;
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index 50864f99446d..1ba29bb85b67 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -2012,10 +2012,30 @@ bool __i40evf_chk_linearize(struct sk_buff *skb)
/* Walk through fragments adding latest fragment, testing it, and
* then removing stale fragments from the sum.
*/
- stale = &skb_shinfo(skb)->frags[0];
- for (;;) {
+ for (stale = &skb_shinfo(skb)->frags[0];; stale++) {
+ int stale_size = skb_frag_size(stale);
+
sum += skb_frag_size(frag++);
+ /* The stale fragment may present us with a smaller
+ * descriptor than the actual fragment size. To account
+ * for that we need to remove all the data on the front and
+ * figure out what the remainder would be in the last
+ * descriptor associated with the fragment.
+ */
+ if (stale_size > I40E_MAX_DATA_PER_TXD) {
+ int align_pad = -(stale->page_offset) &
+ (I40E_MAX_READ_REQ_SIZE - 1);
+
+ sum -= align_pad;
+ stale_size -= align_pad;
+
+ do {
+ sum -= I40E_MAX_DATA_PER_TXD_ALIGNED;
+ stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED;
+ } while (stale_size > I40E_MAX_DATA_PER_TXD);
+ }
+
/* if sum is negative we failed to make sufficient progress */
if (sum < 0)
return true;
@@ -2023,7 +2043,7 @@ bool __i40evf_chk_linearize(struct sk_buff *skb)
if (!nr_frags--)
break;
- sum -= skb_frag_size(stale++);
+ sum -= stale_size;
}
return false;