diff options
| author | Jarod Wilson <jarod@redhat.com> | 2016-10-17 15:54:05 -0400 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2016-10-18 11:34:18 -0400 |
| commit | 91c527a55664ddf4bee26673a35f91748dae4142 (patch) | |
| tree | 5182f5a33b97804b76af6e0906575dd0044b2e22 /drivers/net/ethernet/intel/ixgb | |
| parent | e1c6dccaf3af291488fbad155d7ee6bc29db262a (diff) | |
ethernet/intel: use core min/max MTU checking
e100: min_mtu 68, max_mtu 1500
- remove e100_change_mtu entirely, is identical to old eth_change_mtu,
and no longer serves a purpose. No need to set min_mtu or max_mtu
explicitly, as ether_setup() will already set them to 68 and 1500.
e1000: min_mtu 46, max_mtu 16110
e1000e: min_mtu 68, max_mtu varies based on adapter
fm10k: min_mtu 68, max_mtu 15342
- remove fm10k_change_mtu entirely, does nothing now
i40e: min_mtu 68, max_mtu 9706
i40evf: min_mtu 68, max_mtu 9706
igb: min_mtu 68, max_mtu 9216
- There are two different "max" frame sizes claimed and both checked in
the driver, the larger value wasn't relevant though, so I've set max_mtu
to the smaller of the two values here to retain identical behavior.
igbvf: min_mtu 68, max_mtu 9216
- Same issue as igb duplicated
ixgb: min_mtu 68, max_mtu 16114
- Also remove pointless old == new check, as that's done in dev_set_mtu
ixgbe: min_mtu 68, max_mtu 9710
ixgbevf: min_mtu 68, max_mtu dependent on hardware/firmware
- Some hw can only handle up to max_mtu 1504 on a vf, others 9710
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/intel/ixgb')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgb/ixgb_main.c | 16 |
1 files changed, 4 insertions, 12 deletions
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c index 31f91459312f..5826b1ddedcf 100644 --- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c +++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c @@ -487,6 +487,10 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->vlan_features |= NETIF_F_HIGHDMA; } + /* MTU range: 68 - 16114 */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = IXGB_MAX_JUMBO_FRAME_SIZE - ETH_HLEN; + /* make sure the EEPROM is good */ if (!ixgb_validate_eeprom_checksum(&adapter->hw)) { @@ -1619,18 +1623,6 @@ ixgb_change_mtu(struct net_device *netdev, int new_mtu) { struct ixgb_adapter *adapter = netdev_priv(netdev); int max_frame = new_mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH; - int old_max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH; - - /* MTU < 68 is an error for IPv4 traffic, just don't allow it */ - if ((new_mtu < 68) || - (max_frame > IXGB_MAX_JUMBO_FRAME_SIZE + ENET_FCS_LENGTH)) { - netif_err(adapter, probe, adapter->netdev, - "Invalid MTU setting %d\n", new_mtu); - return -EINVAL; - } - - if (old_max_frame == max_frame) - return 0; if (netif_running(netdev)) ixgb_down(adapter, true); |