ice: Add more flexibility on how we assign an ITR index

This issue came about when looking at the VF function
ice_vc_cfg_irq_map_msg. Currently we are assigning the itr_setting value
to the itr_idx received from the AVF driver, which is not correct and is
not used for the VF flow anyway. Currently the only way we set the ITR
index for both the PF and VF driver is by hard coding ICE_TX_ITR or
ICE_RX_ITR for the ITR index on each q_vector.

To fix this, add the member itr_idx in struct ice_ring_container. This
can then be used to dynamically program the correct ITR index. This change
also affected the PF driver so make the necessary changes there as well.

Also, removed the itr_setting member in struct ice_ring because it is not
being used meaningfully and is going to be removed in a future patch that
includes dynamic ITR.

On another note, this will be useful moving forward if we decide to split
Rx/Tx rings on different q_vectors instead of sharing them as queue pairs.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 4 insertions, 9 deletions

diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.h b/drivers/net/ethernet/intel/ice/ice_txrx.h
index a9b92974e041..1d0f58bd389b 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.h
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.h
@@ -105,8 +105,9 @@ enum ice_rx_dtype {
 #define ICE_TX_ITR	ICE_IDX_ITR1
 #define ICE_ITR_DYNAMIC	0x8000  /* use top bit as a flag */
 #define ICE_ITR_8K	125
-#define ICE_DFLT_TX_ITR	ICE_ITR_8K
-#define ICE_DFLT_RX_ITR	ICE_ITR_8K
+#define ICE_ITR_20K	50
+#define ICE_DFLT_TX_ITR	ICE_ITR_20K
+#define ICE_DFLT_RX_ITR	ICE_ITR_20K
 /* apply ITR granularity translation to program the register. itr_gran is either
  * 2 or 4 usecs so we need to divide by 2 first then shift by that value
  */
@@ -135,13 +136,6 @@ struct ice_ring {
 	u16 q_index;			/* Queue number of ring */
 	u32 txq_teid;			/* Added Tx queue TEID */
 
-	/* high bit set means dynamic, use accessor routines to read/write.
-	 * hardware supports 4us/2us resolution for the ITR registers.
-	 * these values always store the USER setting, and must be converted
-	 * before programming to a register.
-	 */
-	u16 itr_setting;
-
 	u16 count;			/* Number of descriptors */
 	u16 reg_idx;			/* HW register index of the ring */
 
@@ -178,6 +172,7 @@ struct ice_ring_container {
 	unsigned int total_bytes;	/* total bytes processed this int */
 	unsigned int total_pkts;	/* total packets processed this int */
 	enum ice_latency_range latency_range;
+	int itr_idx;	/* index in the interrupt vector */
 	u16 itr;
 };