diff options
| author | David S. Miller <davem@davemloft.net> | 2015-04-02 16:16:53 -0400 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2015-04-02 16:16:53 -0400 |
| commit | 9f0d34bc344889c2e6c593bd949d7ab821f0f4a5 (patch) | |
| tree | e5bfc776a09315afa4dbcae97ac04f2cca239c96 /drivers/net/ethernet/freescale | |
| parent | e4a924f5768c55002c02ceba9b9f86824c35f956 (diff) | |
| parent | 0a4812798fae4f6bfcaab51e31b3898ff5ea3108 (diff) | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
drivers/net/usb/asix_common.c
drivers/net/usb/sr9800.c
drivers/net/usb/usbnet.c
include/linux/usb/usbnet.h
net/ipv4/tcp_ipv4.c
net/ipv6/tcp_ipv6.c
The TCP conflicts were overlapping changes. In 'net' we added a
READ_ONCE() to the socket cached RX route read, whilst in 'net-next'
Eric Dumazet touched the surrounding code dealing with how mini
sockets are handled.
With USB, it's a case of the same bug fix first going into net-next
and then I cherry picked it back into net.
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/freescale')
| -rw-r--r-- | drivers/net/ethernet/freescale/fec_main.c | 30 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/ucc_geth.c | 3 |
2 files changed, 30 insertions, 3 deletions
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 78e1ce09b1ab..f6a3a7abd468 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -1954,6 +1954,7 @@ static int fec_enet_mii_init(struct platform_device *pdev) struct fec_enet_private *fep = netdev_priv(ndev); struct device_node *node; int err = -ENXIO, i; + u32 mii_speed, holdtime; /* * The i.MX28 dual fec interfaces are not equal. @@ -1991,10 +1992,33 @@ static int fec_enet_mii_init(struct platform_device *pdev) * Reference Manual has an error on this, and gets fixed on i.MX6Q * document. */ - fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk_ipg), 5000000); + mii_speed = DIV_ROUND_UP(clk_get_rate(fep->clk_ipg), 5000000); if (fep->quirks & FEC_QUIRK_ENET_MAC) - fep->phy_speed--; - fep->phy_speed <<= 1; + mii_speed--; + if (mii_speed > 63) { + dev_err(&pdev->dev, + "fec clock (%lu) to fast to get right mii speed\n", + clk_get_rate(fep->clk_ipg)); + err = -EINVAL; + goto err_out; + } + + /* + * The i.MX28 and i.MX6 types have another filed in the MSCR (aka + * MII_SPEED) register that defines the MDIO output hold time. Earlier + * versions are RAZ there, so just ignore the difference and write the + * register always. + * The minimal hold time according to IEE802.3 (clause 22) is 10 ns. + * HOLDTIME + 1 is the number of clk cycles the fec is holding the + * output. + * The HOLDTIME bitfield takes values between 0 and 7 (inclusive). + * Given that ceil(clkrate / 5000000) <= 64, the calculation for + * holdtime cannot result in a value greater than 3. + */ + holdtime = DIV_ROUND_UP(clk_get_rate(fep->clk_ipg), 100000000) - 1; + + fep->phy_speed = mii_speed << 1 | holdtime << 8; + writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); fep->mii_bus = mdiobus_alloc(); diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index bfdccbd58be0..4dd40e057f40 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -3893,6 +3893,9 @@ static int ucc_geth_probe(struct platform_device* ofdev) ugeth->phy_interface = phy_interface; ugeth->max_speed = max_speed; + /* Carrier starts down, phylib will bring it up */ + netif_carrier_off(dev); + err = register_netdev(dev); if (err) { if (netif_msg_probe(ugeth)) |