diff options
author | Sathya Perla <sathya.perla@emulex.com> | 2015-02-23 04:20:13 -0500 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2015-02-23 15:08:32 -0500 |
commit | 9fa465c0ce0d99f098195d7b0a550aeb1b2a8c44 (patch) | |
tree | a266390bada462938fbeffdf9adb1a066dcd6a00 /drivers/net/ethernet/emulex | |
parent | d0e1b319bbf345e8b8cc8bd7702cc6c33db074d9 (diff) |
be2net: remove code duplication relating to Lancer reset sequence
The steps needed for Lancer's reset/initialization sequence are:
a) wait for SLIPORT_STAUS RDY bit to be set
b) set the SLIPORT_CONTROL IP bit
c) repeat step "a"
The code needed for this sequence is already covered by the be_func_init()
routine (with minor modifications.) So, get rid of the
lancer_test_and_set_rdy_state() and lancer_provisioning_error() routines
that unnecessarily duplicate this code. Also fixed the error recovery
function to take care of these changes
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/emulex')
-rw-r--r-- | drivers/net/ethernet/emulex/benet/be_cmds.c | 81 | ||||
-rw-r--r-- | drivers/net/ethernet/emulex/benet/be_main.c | 91 |
2 files changed, 55 insertions, 117 deletions
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 8a8a23030aff..f6db7b3e9b70 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -635,73 +635,16 @@ static int lancer_wait_ready(struct be_adapter *adapter) for (i = 0; i < SLIPORT_READY_TIMEOUT; i++) { sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET); if (sliport_status & SLIPORT_STATUS_RDY_MASK) - break; - - msleep(1000); - } - - if (i == SLIPORT_READY_TIMEOUT) - return sliport_status ? : -1; - - return 0; -} - -static bool lancer_provisioning_error(struct be_adapter *adapter) -{ - u32 sliport_status = 0, sliport_err1 = 0, sliport_err2 = 0; - - sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET); - if (sliport_status & SLIPORT_STATUS_ERR_MASK) { - sliport_err1 = ioread32(adapter->db + SLIPORT_ERROR1_OFFSET); - sliport_err2 = ioread32(adapter->db + SLIPORT_ERROR2_OFFSET); - - if (sliport_err1 == SLIPORT_ERROR_NO_RESOURCE1 && - sliport_err2 == SLIPORT_ERROR_NO_RESOURCE2) - return true; - } - return false; -} - -int lancer_test_and_set_rdy_state(struct be_adapter *adapter) -{ - int status; - u32 sliport_status, err, reset_needed; - bool resource_error; + return 0; - resource_error = lancer_provisioning_error(adapter); - if (resource_error) - return -EAGAIN; + if (sliport_status & SLIPORT_STATUS_ERR_MASK && + !(sliport_status & SLIPORT_STATUS_RN_MASK)) + return -EIO; - status = lancer_wait_ready(adapter); - if (!status) { - sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET); - err = sliport_status & SLIPORT_STATUS_ERR_MASK; - reset_needed = sliport_status & SLIPORT_STATUS_RN_MASK; - if (err && reset_needed) { - iowrite32(SLI_PORT_CONTROL_IP_MASK, - adapter->db + SLIPORT_CONTROL_OFFSET); - - /* check if adapter has corrected the error */ - status = lancer_wait_ready(adapter); - sliport_status = ioread32(adapter->db + - SLIPORT_STATUS_OFFSET); - sliport_status &= (SLIPORT_STATUS_ERR_MASK | - SLIPORT_STATUS_RN_MASK); - if (status || sliport_status) - status = -1; - } else if (err || reset_needed) { - status = -1; - } + msleep(1000); } - /* Stop error recovery if error is not recoverable. - * No resource error is temporary errors and will go away - * when PF provisions resources. - */ - resource_error = lancer_provisioning_error(adapter); - if (resource_error) - status = -EAGAIN; - return status; + return sliport_status ? : -1; } int be_fw_wait_ready(struct be_adapter *adapter) @@ -738,7 +681,7 @@ int be_fw_wait_ready(struct be_adapter *adapter) err: dev_err(dev, "POST timeout; stage=%#x\n", stage); - return -1; + return -ETIMEDOUT; } static inline struct be_sge *nonembedded_sgl(struct be_mcc_wrb *wrb) @@ -2130,16 +2073,12 @@ int be_cmd_reset_function(struct be_adapter *adapter) int status; if (lancer_chip(adapter)) { + iowrite32(SLI_PORT_CONTROL_IP_MASK, + adapter->db + SLIPORT_CONTROL_OFFSET); status = lancer_wait_ready(adapter); - if (!status) { - iowrite32(SLI_PORT_CONTROL_IP_MASK, - adapter->db + SLIPORT_CONTROL_OFFSET); - status = lancer_test_and_set_rdy_state(adapter); - } - if (status) { + if (status) dev_err(&adapter->pdev->dev, "Adapter in non recoverable error\n"); - } return status; } diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 034ce7031ce2..4a29ff15a3cc 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4903,18 +4903,54 @@ static void be_netdev_init(struct net_device *netdev) netdev->ethtool_ops = &be_ethtool_ops; } +/* If any VFs are already enabled don't FLR the PF */ +static bool be_reset_required(struct be_adapter *adapter) +{ + return pci_num_vf(adapter->pdev) ? false : true; +} + +/* Wait for the FW to be ready and perform the required initialization */ +static int be_func_init(struct be_adapter *adapter) +{ + int status; + + status = be_fw_wait_ready(adapter); + if (status) + return status; + + if (be_reset_required(adapter)) { + status = be_cmd_reset_function(adapter); + if (status) + return status; + + /* Wait for interrupts to quiesce after an FLR */ + msleep(100); + + /* We can clear all errors when function reset succeeds */ + be_clear_all_error(adapter); + } + + /* Tell FW we're ready to fire cmds */ + status = be_cmd_fw_init(adapter); + if (status) + return status; + + /* Allow interrupts for other ULPs running on NIC function */ + be_intr_set(adapter, true); + + return 0; +} + static int be_err_recover(struct be_adapter *adapter) { struct net_device *netdev = adapter->netdev; struct device *dev = &adapter->pdev->dev; int status; - status = lancer_test_and_set_rdy_state(adapter); + status = be_func_init(adapter); if (status) goto err; - be_clear_all_error(adapter); - status = be_setup(adapter); if (status) goto err; @@ -4927,13 +4963,13 @@ static int be_err_recover(struct be_adapter *adapter) netif_device_attach(netdev); - dev_err(dev, "Adapter recovery successful\n"); + dev_info(dev, "Adapter recovery successful\n"); return 0; err: - if (status == -EAGAIN) - dev_err(dev, "Waiting for resource provisioning\n"); - else + if (be_physfn(adapter)) dev_err(dev, "Adapter recovery failed\n"); + else + dev_err(dev, "Re-trying adapter recovery\n"); return status; } @@ -4962,10 +4998,8 @@ static void be_err_detection_task(struct work_struct *work) status = be_err_recover(adapter); } - /* In Lancer, for all errors other than provisioning error (-EAGAIN), - * no need to attempt further recovery. - */ - if (!status || status == -EAGAIN) + /* Always attempt recovery on VFs */ + if (!status || be_virtfn(adapter)) be_schedule_err_detection(adapter); } @@ -5208,12 +5242,6 @@ static void be_remove(struct pci_dev *pdev) free_netdev(adapter->netdev); } -/* If any VFs are already enabled don't FLR the PF */ -static bool be_reset_required(struct be_adapter *adapter) -{ - return pci_num_vf(adapter->pdev) ? false : true; -} - static char *mc_name(struct be_adapter *adapter) { char *str = ""; /* default */ @@ -5269,35 +5297,6 @@ static inline char *nic_name(struct pci_dev *pdev) } } -/* Wait for the FW to be ready and perform the required initialization */ -static int be_func_init(struct be_adapter *adapter) -{ - int status; - - status = be_fw_wait_ready(adapter); - if (status) - return status; - - if (be_reset_required(adapter)) { - status = be_cmd_reset_function(adapter); - if (status) - return status; - - /* Wait for interrupts to quiesce after an FLR */ - msleep(100); - } - - /* Tell FW we're ready to fire cmds */ - status = be_cmd_fw_init(adapter); - if (status) - return status; - - /* Allow interrupts for other ULPs running on NIC function */ - be_intr_set(adapter, true); - - return 0; -} - static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id) { struct be_adapter *adapter; |