cxgb4: add support for high priority filters

T6 has a separate region known as high priority filter region
that allows classifying packets going through ULD path. So,
query firmware for HPFILTER resources and enable the high
priority offload filter support when it is available.

Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 40 insertions, 13 deletions

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 12ff69b3ba91..be750f2de23c 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -804,6 +804,26 @@ static int setup_ppod_edram(struct adapter *adap)
 	return 0;
 }
 
+static void adap_config_hpfilter(struct adapter *adapter)
+{
+	u32 param, val = 0;
+	int ret;
+
+	/* Enable HP filter region. Older fw will fail this request and
+	 * it is fine.
+	 */
+	param = FW_PARAM_DEV(HPFILTER_REGION_SUPPORT);
+	ret = t4_set_params(adapter, adapter->mbox, adapter->pf, 0,
+			    1, &param, &val);
+
+	/* An error means FW doesn't know about HP filter support,
+	 * it's not a problem, don't return an error.
+	 */
+	if (ret < 0)
+		dev_err(adapter->pdev_dev,
+			"HP filter region isn't supported by FW\n");
+}
+
 /**
  *	cxgb4_write_rss - write the RSS table for a given port
  *	@pi: the port
@@ -1518,6 +1538,7 @@ static int tid_init(struct tid_info *t)
 	struct adapter *adap = container_of(t, struct adapter, tids);
 	unsigned int max_ftids = t->nftids + t->nsftids;
 	unsigned int natids = t->natids;
+	unsigned int hpftid_bmap_size;
 	unsigned int eotid_bmap_size;
 	unsigned int stid_bmap_size;
 	unsigned int ftid_bmap_size;
@@ -1525,12 +1546,15 @@ static int tid_init(struct tid_info *t)
 
 	stid_bmap_size = BITS_TO_LONGS(t->nstids + t->nsftids);
 	ftid_bmap_size = BITS_TO_LONGS(t->nftids);
+	hpftid_bmap_size = BITS_TO_LONGS(t->nhpftids);
 	eotid_bmap_size = BITS_TO_LONGS(t->neotids);
 	size = t->ntids * sizeof(*t->tid_tab) +
 	       natids * sizeof(*t->atid_tab) +
 	       t->nstids * sizeof(*t->stid_tab) +
 	       t->nsftids * sizeof(*t->stid_tab) +
 	       stid_bmap_size * sizeof(long) +
+	       t->nhpftids * sizeof(*t->hpftid_tab) +
+	       hpftid_bmap_size * sizeof(long) +
 	       max_ftids * sizeof(*t->ftid_tab) +
 	       ftid_bmap_size * sizeof(long) +
 	       t->neotids * sizeof(*t->eotid_tab) +
@@ -1543,7 +1567,9 @@ static int tid_init(struct tid_info *t)
 	t->atid_tab = (union aopen_entry *)&t->tid_tab[t->ntids];
 	t->stid_tab = (struct serv_entry *)&t->atid_tab[natids];
 	t->stid_bmap = (unsigned long *)&t->stid_tab[t->nstids + t->nsftids];
-	t->ftid_tab = (struct filter_entry *)&t->stid_bmap[stid_bmap_size];
+	t->hpftid_tab = (struct filter_entry *)&t->stid_bmap[stid_bmap_size];
+	t->hpftid_bmap = (unsigned long *)&t->hpftid_tab[t->nhpftids];
+	t->ftid_tab = (struct filter_entry *)&t->hpftid_bmap[hpftid_bmap_size];
 	t->ftid_bmap = (unsigned long *)&t->ftid_tab[max_ftids];
 	t->eotid_tab = (struct eotid_entry *)&t->ftid_bmap[ftid_bmap_size];
 	t->eotid_bmap = (unsigned long *)&t->eotid_tab[t->neotids];
@@ -1578,6 +1604,8 @@ static int tid_init(struct tid_info *t)
 			bitmap_zero(t->eotid_bmap, t->neotids);
 	}
 
+	if (t->nhpftids)
+		bitmap_zero(t->hpftid_bmap, t->nhpftids);
 	bitmap_zero(t->ftid_bmap, t->nftids);
 	return 0;
 }
@@ -4351,6 +4379,7 @@ static int adap_init0_config(struct adapter *adapter, int reset)
 			"HMA configuration failed with error %d\n", ret);
 
 	if (is_t6(adapter->params.chip)) {
+		adap_config_hpfilter(adapter);
 		ret = setup_ppod_edram(adapter);
 		if (!ret)
 			dev_info(adapter->pdev_dev, "Successfully enabled "
@@ -4660,16 +4689,6 @@ static int adap_init0(struct adapter *adap, int vpd_skip)
 	/*
 	 * Grab some of our basic fundamental operating parameters.
 	 */
-#define FW_PARAM_DEV(param) \
-	(FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | \
-	FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_##param))
-
-#define FW_PARAM_PFVF(param) \
-	FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_PFVF) | \
-	FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_PFVF_##param)|  \
-	FW_PARAMS_PARAM_Y_V(0) | \
-	FW_PARAMS_PARAM_Z_V(0)
-
 	params[0] = FW_PARAM_PFVF(EQ_START);
 	params[1] = FW_PARAM_PFVF(L2T_START);
 	params[2] = FW_PARAM_PFVF(L2T_END);
@@ -4687,6 +4706,16 @@ static int adap_init0(struct adapter *adap, int vpd_skip)
 	adap->sge.ingr_start = val[5];
 
 	if (CHELSIO_CHIP_VERSION(adap->params.chip) > CHELSIO_T5) {
+		params[0] = FW_PARAM_PFVF(HPFILTER_START);
+		params[1] = FW_PARAM_PFVF(HPFILTER_END);
+		ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 2,
+				      params, val);
+		if (ret < 0)
+			goto bye;
+
+		adap->tids.hpftid_base = val[0];
+		adap->tids.nhpftids = val[1] - val[0] + 1;
+
 		/* Read the raw mps entries. In T6, the last 2 tcam entries
 		 * are reserved for raw mac addresses (rawf = 2, one per port).
 		 */
@@ -5050,8 +5079,6 @@ static int adap_init0(struct adapter *adap, int vpd_skip)
 		}
 		adap->params.crypto = ntohs(caps_cmd.cryptocaps);
 	}
-#undef FW_PARAM_PFVF
-#undef FW_PARAM_DEV
 
 	/* The MTU/MSS Table is initialized by now, so load their values.  If
 	 * we're initializing the adapter, then we'll make any modifications