diff options
| author | Vladimir Oltean <vladimir.oltean@nxp.com> | 2020-09-26 22:32:01 +0300 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2020-09-26 14:17:58 -0700 |
| commit | 2d44b097bbb9d0af0f3b94304fee4b639ab14171 (patch) | |
| tree | e2334284f3b44cb14e9364626b4b9595d7b07b99 /drivers/net/dsa | |
| parent | 435be28b0789b3aa679a993f47d5e480f291e604 (diff) | |
net: mscc: ocelot: move NPI port configuration to DSA
Remove the ocelot_configure_cpu() function, which was in fact bringing
up 2 ports: the CPU port module, which both switchdev and DSA have, and
the NPI port, which only DSA has.
The (non-Ethernet) CPU port module is at a fixed index in the analyzer,
whereas the NPI port is selected through the "ethernet" property in the
device tree.
Therefore, the function to set up an NPI port is DSA-specific, so we
move it there, simplifying the ocelot switch library a little bit.
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: UNGLinuxDriver <UNGLinuxDriver@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/dsa')
| -rw-r--r-- | drivers/net/dsa/ocelot/felix.c | 29 |
1 files changed, 25 insertions, 4 deletions
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c index a56fc50f5be4..b8e192374a32 100644 --- a/drivers/net/dsa/ocelot/felix.c +++ b/drivers/net/dsa/ocelot/felix.c @@ -439,6 +439,8 @@ static int felix_init_structs(struct felix *felix, int num_phys_ports) ocelot->vcap_is2_actions= felix->info->vcap_is2_actions; ocelot->vcap = felix->info->vcap; ocelot->ops = felix->info->ops; + ocelot->inj_prefix = OCELOT_TAG_PREFIX_NONE; + ocelot->xtr_prefix = OCELOT_TAG_PREFIX_LONG; port_phy_modes = kcalloc(num_phys_ports, sizeof(phy_interface_t), GFP_KERNEL); @@ -538,6 +540,28 @@ static int felix_init_structs(struct felix *felix, int num_phys_ports) return 0; } +/* The CPU port module is connected to the Node Processor Interface (NPI). This + * is the mode through which frames can be injected from and extracted to an + * external CPU, over Ethernet. + */ +static void felix_npi_port_init(struct ocelot *ocelot, int port) +{ + ocelot->npi = port; + + ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M | + QSYS_EXT_CPU_CFG_EXT_CPU_PORT(port), + QSYS_EXT_CPU_CFG); + + /* NPI port Injection/Extraction configuration */ + ocelot_fields_write(ocelot, port, SYS_PORT_MODE_INCL_XTR_HDR, + ocelot->xtr_prefix); + ocelot_fields_write(ocelot, port, SYS_PORT_MODE_INCL_INJ_HDR, + ocelot->inj_prefix); + + /* Disable transmission of pause frames */ + ocelot_fields_write(ocelot, port, SYS_PAUSE_CFG_PAUSE_ENA, 0); +} + /* Hardware initialization done here so that we can allocate structures with * devm without fear of dsa_register_switch returning -EPROBE_DEFER and causing * us to allocate structures twice (leak memory) and map PCI memory twice @@ -570,11 +594,8 @@ static int felix_setup(struct dsa_switch *ds) for (port = 0; port < ds->num_ports; port++) { ocelot_init_port(ocelot, port); - /* Bring up the CPU port module and configure the NPI port */ if (dsa_is_cpu_port(ds, port)) - ocelot_configure_cpu(ocelot, port, - OCELOT_TAG_PREFIX_NONE, - OCELOT_TAG_PREFIX_LONG); + felix_npi_port_init(ocelot, port); /* Set the default QoS Classification based on PCP and DEI * bits of vlan tag. |