diff options
author | Boris Brezillon <bbrezillon@kernel.org> | 2020-03-13 19:42:36 +0000 |
---|---|---|
committer | Tudor Ambarus <tudor.ambarus@microchip.com> | 2020-03-16 18:28:53 +0200 |
commit | a0900d0195d2dcce464f4109445a788d5860b970 (patch) | |
tree | 39a9b2262a701d04cf386942ff3e4fa9693ca331 /drivers/mtd/spi-nor/intel-spi.c | |
parent | 81924dae51941018afdaf25638da804be4807ce5 (diff) |
mtd: spi-nor: Prepare core / manufacturer code split
Move all SPI NOR controller drivers to a controllers/ sub-directory
so that we only have SPI NOR related source files under
drivers/mtd/spi-nor/.
Rename spi-nor.c into core.c, we are about to split this file in multiple
source files (one per manufacturer, plus one for the SFDP parsing logic).
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Diffstat (limited to 'drivers/mtd/spi-nor/intel-spi.c')
-rw-r--r-- | drivers/mtd/spi-nor/intel-spi.c | 960 |
1 files changed, 0 insertions, 960 deletions
diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c deleted file mode 100644 index 61d2a0ad2131..000000000000 --- a/drivers/mtd/spi-nor/intel-spi.c +++ /dev/null @@ -1,960 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel PCH/PCU SPI flash driver. - * - * Copyright (C) 2016, Intel Corporation - * Author: Mika Westerberg <mika.westerberg@linux.intel.com> - */ - -#include <linux/err.h> -#include <linux/io.h> -#include <linux/iopoll.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/sizes.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/spi-nor.h> -#include <linux/platform_data/intel-spi.h> - -#include "intel-spi.h" - -/* Offsets are from @ispi->base */ -#define BFPREG 0x00 - -#define HSFSTS_CTL 0x04 -#define HSFSTS_CTL_FSMIE BIT(31) -#define HSFSTS_CTL_FDBC_SHIFT 24 -#define HSFSTS_CTL_FDBC_MASK (0x3f << HSFSTS_CTL_FDBC_SHIFT) - -#define HSFSTS_CTL_FCYCLE_SHIFT 17 -#define HSFSTS_CTL_FCYCLE_MASK (0x0f << HSFSTS_CTL_FCYCLE_SHIFT) -/* HW sequencer opcodes */ -#define HSFSTS_CTL_FCYCLE_READ (0x00 << HSFSTS_CTL_FCYCLE_SHIFT) -#define HSFSTS_CTL_FCYCLE_WRITE (0x02 << HSFSTS_CTL_FCYCLE_SHIFT) -#define HSFSTS_CTL_FCYCLE_ERASE (0x03 << HSFSTS_CTL_FCYCLE_SHIFT) -#define HSFSTS_CTL_FCYCLE_ERASE_64K (0x04 << HSFSTS_CTL_FCYCLE_SHIFT) -#define HSFSTS_CTL_FCYCLE_RDID (0x06 << HSFSTS_CTL_FCYCLE_SHIFT) -#define HSFSTS_CTL_FCYCLE_WRSR (0x07 << HSFSTS_CTL_FCYCLE_SHIFT) -#define HSFSTS_CTL_FCYCLE_RDSR (0x08 << HSFSTS_CTL_FCYCLE_SHIFT) - -#define HSFSTS_CTL_FGO BIT(16) -#define HSFSTS_CTL_FLOCKDN BIT(15) -#define HSFSTS_CTL_FDV BIT(14) -#define HSFSTS_CTL_SCIP BIT(5) -#define HSFSTS_CTL_AEL BIT(2) -#define HSFSTS_CTL_FCERR BIT(1) -#define HSFSTS_CTL_FDONE BIT(0) - -#define FADDR 0x08 -#define DLOCK 0x0c -#define FDATA(n) (0x10 + ((n) * 4)) - -#define FRACC 0x50 - -#define FREG(n) (0x54 + ((n) * 4)) -#define FREG_BASE_MASK 0x3fff -#define FREG_LIMIT_SHIFT 16 -#define FREG_LIMIT_MASK (0x03fff << FREG_LIMIT_SHIFT) - -/* Offset is from @ispi->pregs */ -#define PR(n) ((n) * 4) -#define PR_WPE BIT(31) -#define PR_LIMIT_SHIFT 16 -#define PR_LIMIT_MASK (0x3fff << PR_LIMIT_SHIFT) -#define PR_RPE BIT(15) -#define PR_BASE_MASK 0x3fff - -/* Offsets are from @ispi->sregs */ -#define SSFSTS_CTL 0x00 -#define SSFSTS_CTL_FSMIE BIT(23) -#define SSFSTS_CTL_DS BIT(22) -#define SSFSTS_CTL_DBC_SHIFT 16 -#define SSFSTS_CTL_SPOP BIT(11) -#define SSFSTS_CTL_ACS BIT(10) -#define SSFSTS_CTL_SCGO BIT(9) -#define SSFSTS_CTL_COP_SHIFT 12 -#define SSFSTS_CTL_FRS BIT(7) -#define SSFSTS_CTL_DOFRS BIT(6) -#define SSFSTS_CTL_AEL BIT(4) -#define SSFSTS_CTL_FCERR BIT(3) -#define SSFSTS_CTL_FDONE BIT(2) -#define SSFSTS_CTL_SCIP BIT(0) - -#define PREOP_OPTYPE 0x04 -#define OPMENU0 0x08 -#define OPMENU1 0x0c - -#define OPTYPE_READ_NO_ADDR 0 -#define OPTYPE_WRITE_NO_ADDR 1 -#define OPTYPE_READ_WITH_ADDR 2 -#define OPTYPE_WRITE_WITH_ADDR 3 - -/* CPU specifics */ -#define BYT_PR 0x74 -#define BYT_SSFSTS_CTL 0x90 -#define BYT_BCR 0xfc -#define BYT_BCR_WPD BIT(0) -#define BYT_FREG_NUM 5 -#define BYT_PR_NUM 5 - -#define LPT_PR 0x74 -#define LPT_SSFSTS_CTL 0x90 -#define LPT_FREG_NUM 5 -#define LPT_PR_NUM 5 - -#define BXT_PR 0x84 -#define BXT_SSFSTS_CTL 0xa0 -#define BXT_FREG_NUM 12 -#define BXT_PR_NUM 6 - -#define CNL_PR 0x84 -#define CNL_FREG_NUM 6 -#define CNL_PR_NUM 5 - -#define LVSCC 0xc4 -#define UVSCC 0xc8 -#define ERASE_OPCODE_SHIFT 8 -#define ERASE_OPCODE_MASK (0xff << ERASE_OPCODE_SHIFT) -#define ERASE_64K_OPCODE_SHIFT 16 -#define ERASE_64K_OPCODE_MASK (0xff << ERASE_OPCODE_SHIFT) - -#define INTEL_SPI_TIMEOUT 5000 /* ms */ -#define INTEL_SPI_FIFO_SZ 64 - -/** - * struct intel_spi - Driver private data - * @dev: Device pointer - * @info: Pointer to board specific info - * @nor: SPI NOR layer structure - * @base: Beginning of MMIO space - * @pregs: Start of protection registers - * @sregs: Start of software sequencer registers - * @nregions: Maximum number of regions - * @pr_num: Maximum number of protected range registers - * @writeable: Is the chip writeable - * @locked: Is SPI setting locked - * @swseq_reg: Use SW sequencer in register reads/writes - * @swseq_erase: Use SW sequencer in erase operation - * @erase_64k: 64k erase supported - * @atomic_preopcode: Holds preopcode when atomic sequence is requested - * @opcodes: Opcodes which are supported. This are programmed by BIOS - * before it locks down the controller. - */ -struct intel_spi { - struct device *dev; - const struct intel_spi_boardinfo *info; - struct spi_nor nor; - void __iomem *base; - void __iomem *pregs; - void __iomem *sregs; - size_t nregions; - size_t pr_num; - bool writeable; - bool locked; - bool swseq_reg; - bool swseq_erase; - bool erase_64k; - u8 atomic_preopcode; - u8 opcodes[8]; -}; - -static bool writeable; -module_param(writeable, bool, 0); -MODULE_PARM_DESC(writeable, "Enable write access to SPI flash chip (default=0)"); - -static void intel_spi_dump_regs(struct intel_spi *ispi) -{ - u32 value; - int i; - - dev_dbg(ispi->dev, "BFPREG=0x%08x\n", readl(ispi->base + BFPREG)); - - value = readl(ispi->base + HSFSTS_CTL); - dev_dbg(ispi->dev, "HSFSTS_CTL=0x%08x\n", value); - if (value & HSFSTS_CTL_FLOCKDN) - dev_dbg(ispi->dev, "-> Locked\n"); - - dev_dbg(ispi->dev, "FADDR=0x%08x\n", readl(ispi->base + FADDR)); - dev_dbg(ispi->dev, "DLOCK=0x%08x\n", readl(ispi->base + DLOCK)); - - for (i = 0; i < 16; i++) - dev_dbg(ispi->dev, "FDATA(%d)=0x%08x\n", - i, readl(ispi->base + FDATA(i))); - - dev_dbg(ispi->dev, "FRACC=0x%08x\n", readl(ispi->base + FRACC)); - - for (i = 0; i < ispi->nregions; i++) - dev_dbg(ispi->dev, "FREG(%d)=0x%08x\n", i, - readl(ispi->base + FREG(i))); - for (i = 0; i < ispi->pr_num; i++) - dev_dbg(ispi->dev, "PR(%d)=0x%08x\n", i, - readl(ispi->pregs + PR(i))); - - if (ispi->sregs) { - value = readl(ispi->sregs + SSFSTS_CTL); - dev_dbg(ispi->dev, "SSFSTS_CTL=0x%08x\n", value); - dev_dbg(ispi->dev, "PREOP_OPTYPE=0x%08x\n", - readl(ispi->sregs + PREOP_OPTYPE)); - dev_dbg(ispi->dev, "OPMENU0=0x%08x\n", - readl(ispi->sregs + OPMENU0)); - dev_dbg(ispi->dev, "OPMENU1=0x%08x\n", - readl(ispi->sregs + OPMENU1)); - } - - if (ispi->info->type == INTEL_SPI_BYT) - dev_dbg(ispi->dev, "BCR=0x%08x\n", readl(ispi->base + BYT_BCR)); - - dev_dbg(ispi->dev, "LVSCC=0x%08x\n", readl(ispi->base + LVSCC)); - dev_dbg(ispi->dev, "UVSCC=0x%08x\n", readl(ispi->base + UVSCC)); - - dev_dbg(ispi->dev, "Protected regions:\n"); - for (i = 0; i < ispi->pr_num; i++) { - u32 base, limit; - - value = readl(ispi->pregs + PR(i)); - if (!(value & (PR_WPE | PR_RPE))) - continue; - - limit = (value & PR_LIMIT_MASK) >> PR_LIMIT_SHIFT; - base = value & PR_BASE_MASK; - - dev_dbg(ispi->dev, " %02d base: 0x%08x limit: 0x%08x [%c%c]\n", - i, base << 12, (limit << 12) | 0xfff, - value & PR_WPE ? 'W' : '.', - value & PR_RPE ? 'R' : '.'); - } - - dev_dbg(ispi->dev, "Flash regions:\n"); - for (i = 0; i < ispi->nregions; i++) { - u32 region, base, limit; - - region = readl(ispi->base + FREG(i)); - base = region & FREG_BASE_MASK; - limit = (region & FREG_LIMIT_MASK) >> FREG_LIMIT_SHIFT; - - if (base >= limit || (i > 0 && limit == 0)) - dev_dbg(ispi->dev, " %02d disabled\n", i); - else - dev_dbg(ispi->dev, " %02d base: 0x%08x limit: 0x%08x\n", - i, base << 12, (limit << 12) | 0xfff); - } - - dev_dbg(ispi->dev, "Using %cW sequencer for register access\n", - ispi->swseq_reg ? 'S' : 'H'); - dev_dbg(ispi->dev, "Using %cW sequencer for erase operation\n", - ispi->swseq_erase ? 'S' : 'H'); -} - -/* Reads max INTEL_SPI_FIFO_SZ bytes from the device fifo */ -static int intel_spi_read_block(struct intel_spi *ispi, void *buf, size_t size) -{ - size_t bytes; - int i = 0; - - if (size > INTEL_SPI_FIFO_SZ) - return -EINVAL; - - while (size > 0) { - bytes = min_t(size_t, size, 4); - memcpy_fromio(buf, ispi->base + FDATA(i), bytes); - size -= bytes; - buf += bytes; - i++; - } - - return 0; -} - -/* Writes max INTEL_SPI_FIFO_SZ bytes to the device fifo */ -static int intel_spi_write_block(struct intel_spi *ispi, const void *buf, - size_t size) -{ - size_t bytes; - int i = 0; - - if (size > INTEL_SPI_FIFO_SZ) - return -EINVAL; - - while (size > 0) { - bytes = min_t(size_t, size, 4); - memcpy_toio(ispi->base + FDATA(i), buf, bytes); - size -= bytes; - buf += bytes; - i++; - } - - return 0; -} - -static int intel_spi_wait_hw_busy(struct intel_spi *ispi) -{ - u32 val; - - return readl_poll_timeout(ispi->base + HSFSTS_CTL, val, - !(val & HSFSTS_CTL_SCIP), 40, - INTEL_SPI_TIMEOUT * 1000); -} - -static int intel_spi_wait_sw_busy(struct intel_spi *ispi) -{ - u32 val; - - return readl_poll_timeout(ispi->sregs + SSFSTS_CTL, val, - !(val & SSFSTS_CTL_SCIP), 40, - INTEL_SPI_TIMEOUT * 1000); -} - -static int intel_spi_init(struct intel_spi *ispi) -{ - u32 opmenu0, opmenu1, lvscc, uvscc, val; - int i; - - switch (ispi->info->type) { - case INTEL_SPI_BYT: - ispi->sregs = ispi->base + BYT_SSFSTS_CTL; - ispi->pregs = ispi->base + BYT_PR; - ispi->nregions = BYT_FREG_NUM; - ispi->pr_num = BYT_PR_NUM; - ispi->swseq_reg = true; - - if (writeable) { - /* Disable write protection */ - val = readl(ispi->base + BYT_BCR); - if (!(val & BYT_BCR_WPD)) { - val |= BYT_BCR_WPD; - writel(val, ispi->base + BYT_BCR); - val = readl(ispi->base + BYT_BCR); - } - - ispi->writeable = !!(val & BYT_BCR_WPD); - } - - break; - - case INTEL_SPI_LPT: - ispi->sregs = ispi->base + LPT_SSFSTS_CTL; - ispi->pregs = ispi->base + LPT_PR; - ispi->nregions = LPT_FREG_NUM; - ispi->pr_num = LPT_PR_NUM; - ispi->swseq_reg = true; - break; - - case INTEL_SPI_BXT: - ispi->sregs = ispi->base + BXT_SSFSTS_CTL; - ispi->pregs = ispi->base + BXT_PR; - ispi->nregions = BXT_FREG_NUM; - ispi->pr_num = BXT_PR_NUM; - ispi->erase_64k = true; - break; - - case INTEL_SPI_CNL: - ispi->sregs = NULL; - ispi->pregs = ispi->base + CNL_PR; - ispi->nregions = CNL_FREG_NUM; - ispi->pr_num = CNL_PR_NUM; - break; - - default: - return -EINVAL; - } - - /* Disable #SMI generation from HW sequencer */ - val = readl(ispi->base + HSFSTS_CTL); - val &= ~HSFSTS_CTL_FSMIE; - writel(val, ispi->base + HSFSTS_CTL); - - /* - * Determine whether erase operation should use HW or SW sequencer. - * - * The HW sequencer has a predefined list of opcodes, with only the - * erase opcode being programmable in LVSCC and UVSCC registers. - * If these registers don't contain a valid erase opcode, erase - * cannot be done using HW sequencer. - */ - lvscc = readl(ispi->base + LVSCC); - uvscc = readl(ispi->base + UVSCC); - if (!(lvscc & ERASE_OPCODE_MASK) || !(uvscc & ERASE_OPCODE_MASK)) - ispi->swseq_erase = true; - /* SPI controller on Intel BXT supports 64K erase opcode */ - if (ispi->info->type == INTEL_SPI_BXT && !ispi->swseq_erase) - if (!(lvscc & ERASE_64K_OPCODE_MASK) || - !(uvscc & ERASE_64K_OPCODE_MASK)) - ispi->erase_64k = false; - - if (ispi->sregs == NULL && (ispi->swseq_reg || ispi->swseq_erase)) { - dev_err(ispi->dev, "software sequencer not supported, but required\n"); - return -EINVAL; - } - - /* - * Some controllers can only do basic operations using hardware - * sequencer. All other operations are supposed to be carried out - * using software sequencer. - */ - if (ispi->swseq_reg) { - /* Disable #SMI generation from SW sequencer */ - val = readl(ispi->sregs + SSFSTS_CTL); - val &= ~SSFSTS_CTL_FSMIE; - writel(val, ispi->sregs + SSFSTS_CTL); - } - - /* Check controller's lock status */ - val = readl(ispi->base + HSFSTS_CTL); - ispi->locked = !!(val & HSFSTS_CTL_FLOCKDN); - - if (ispi->locked && ispi->sregs) { - /* - * BIOS programs allowed opcodes and then locks down the - * register. So read back what opcodes it decided to support. - * That's the set we are going to support as well. - */ - opmenu0 = readl(ispi->sregs + OPMENU0); - opmenu1 = readl(ispi->sregs + OPMENU1); - - if (opmenu0 && opmenu1) { - for (i = 0; i < ARRAY_SIZE(ispi->opcodes) / 2; i++) { - ispi->opcodes[i] = opmenu0 >> i * 8; - ispi->opcodes[i + 4] = opmenu1 >> i * 8; - } - } - } - - intel_spi_dump_regs(ispi); - - return 0; -} - -static int intel_spi_opcode_index(struct intel_spi *ispi, u8 opcode, int optype) -{ - int i; - int preop; - - if (ispi->locked) { - for (i = 0; i < ARRAY_SIZE(ispi->opcodes); i++) - if (ispi->opcodes[i] == opcode) - return i; - - return -EINVAL; - } - - /* The lock is off, so just use index 0 */ - writel(opcode, ispi->sregs + OPMENU0); - preop = readw(ispi->sregs + PREOP_OPTYPE); - writel(optype << 16 | preop, ispi->sregs + PREOP_OPTYPE); - - return 0; -} - -static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, size_t len) -{ - u32 val, status; - int ret; - - val = readl(ispi->base + HSFSTS_CTL); - val &= ~(HSFSTS_CTL_FCYCLE_MASK | HSFSTS_CTL_FDBC_MASK); - - switch (opcode) { - case SPINOR_OP_RDID: - val |= HSFSTS_CTL_FCYCLE_RDID; - break; - case SPINOR_OP_WRSR: - val |= HSFSTS_CTL_FCYCLE_WRSR; - break; - case SPINOR_OP_RDSR: - val |= HSFSTS_CTL_FCYCLE_RDSR; - break; - default: - return -EINVAL; - } - - if (len > INTEL_SPI_FIFO_SZ) - return -EINVAL; - - val |= (len - 1) << HSFSTS_CTL_FDBC_SHIFT; - val |= HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE; - val |= HSFSTS_CTL_FGO; - writel(val, ispi->base + HSFSTS_CTL); - - ret = intel_spi_wait_hw_busy(ispi); - if (ret) - return ret; - - status = readl(ispi->base + HSFSTS_CTL); - if (status & HSFSTS_CTL_FCERR) - return -EIO; - else if (status & HSFSTS_CTL_AEL) - return -EACCES; - - return 0; -} - -static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, size_t len, - int optype) -{ - u32 val = 0, status; - u8 atomic_preopcode; - int ret; - - ret = intel_spi_opcode_index(ispi, opcode, optype); - if (ret < 0) - return ret; - - if (len > INTEL_SPI_FIFO_SZ) - return -EINVAL; - - /* - * Always clear it after each SW sequencer operation regardless - * of whether it is successful or not. - */ - atomic_preopcode = ispi->atomic_preopcode; - ispi->atomic_preopcode = 0; - - /* Only mark 'Data Cycle' bit when there is data to be transferred */ - if (len > 0) - val = ((len - 1) << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS; - val |= ret << SSFSTS_CTL_COP_SHIFT; - val |= SSFSTS_CTL_FCERR | SSFSTS_CTL_FDONE; - val |= SSFSTS_CTL_SCGO; - if (atomic_preopcode) { - u16 preop; - - switch (optype) { - case OPTYPE_WRITE_NO_ADDR: - case OPTYPE_WRITE_WITH_ADDR: - /* Pick matching preopcode for the atomic sequence */ - preop = readw(ispi->sregs + PREOP_OPTYPE); - if ((preop & 0xff) == atomic_preopcode) - ; /* Do nothing */ - else if ((preop >> 8) == atomic_preopcode) - val |= SSFSTS_CTL_SPOP; - else - return -EINVAL; - - /* Enable atomic sequence */ - val |= SSFSTS_CTL_ACS; - break; - - default: - return -EINVAL; - } - - } - writel(val, ispi->sregs + SSFSTS_CTL); - - ret = intel_spi_wait_sw_busy(ispi); - if (ret) - return ret; - - status = readl(ispi->sregs + SSFSTS_CTL); - if (status & SSFSTS_CTL_FCERR) - return -EIO; - else if (status & SSFSTS_CTL_AEL) - return -EACCES; - - return 0; -} - -static int intel_spi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, - size_t len) -{ - struct intel_spi *ispi = nor->priv; - int ret; - - /* Address of the first chip */ - writel(0, ispi->base + FADDR); - - if (ispi->swseq_reg) - ret = intel_spi_sw_cycle(ispi, opcode, len, - OPTYPE_READ_NO_ADDR); - else - ret = intel_spi_hw_cycle(ispi, opcode, len); - - if (ret) - return ret; - - return intel_spi_read_block(ispi, buf, len); -} - -static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf, - size_t len) -{ - struct intel_spi *ispi = nor->priv; - int ret; - - /* - * This is handled with atomic operation and preop code in Intel - * controller so we only verify that it is available. If the - * controller is not locked, program the opcode to the PREOP - * register for later use. - * - * When hardware sequencer is used there is no need to program - * any opcodes (it handles them automatically as part of a command). - */ - if (opcode == SPINOR_OP_WREN) { - u16 preop; - - if (!ispi->swseq_reg) - return 0; - - preop = readw(ispi->sregs + PREOP_OPTYPE); - if ((preop & 0xff) != opcode && (preop >> 8) != opcode) { - if (ispi->locked) - return -EINVAL; - writel(opcode, ispi->sregs + PREOP_OPTYPE); - } - - /* - * This enables atomic sequence on next SW sycle. Will - * be cleared after next operation. - */ - ispi->atomic_preopcode = opcode; - return 0; - } - - writel(0, ispi->base + FADDR); - - /* Write the value beforehand */ - ret = intel_spi_write_block(ispi, buf, len); - if (ret) - return ret; - - if (ispi->swseq_reg) - return intel_spi_sw_cycle(ispi, opcode, len, - OPTYPE_WRITE_NO_ADDR); - return intel_spi_hw_cycle(ispi, opcode, len); -} - -static ssize_t intel_spi_read(struct spi_nor *nor, loff_t from, size_t len, - u_char *read_buf) -{ - struct intel_spi *ispi = nor->priv; - size_t block_size, retlen = 0; - u32 val, status; - ssize_t ret; - - /* - * Atomic sequence is not expected with HW sequencer reads. Make - * sure it is cleared regardless. - */ - if (WARN_ON_ONCE(ispi->atomic_preopcode)) - ispi->atomic_preopcode = 0; - - switch (nor->read_opcode) { - case SPINOR_OP_READ: - case SPINOR_OP_READ_FAST: - case SPINOR_OP_READ_4B: - case SPINOR_OP_READ_FAST_4B: - break; - default: - return -EINVAL; - } - - while (len > 0) { - block_size = min_t(size_t, len, INTEL_SPI_FIFO_SZ); - - /* Read cannot cross 4K boundary */ - block_size = min_t(loff_t, from + block_size, - round_up(from + 1, SZ_4K)) - from; - - writel(from, ispi->base + FADDR); - - val = readl(ispi->base + HSFSTS_CTL); - val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK); - val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE; - val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT; - val |= HSFSTS_CTL_FCYCLE_READ; - val |= HSFSTS_CTL_FGO; - writel(val, ispi->base + HSFSTS_CTL); - - ret = intel_spi_wait_hw_busy(ispi); - if (ret) - return ret; - - status = readl(ispi->base + HSFSTS_CTL); - if (status & HSFSTS_CTL_FCERR) - ret = -EIO; - else if (status & HSFSTS_CTL_AEL) - ret = -EACCES; - - if (ret < 0) { - dev_err(ispi->dev, "read error: %llx: %#x\n", from, - status); - return ret; - } - - ret = intel_spi_read_block(ispi, read_buf, block_size); - if (ret) - return ret; - - len -= block_size; - from += block_size; - retlen += block_size; - read_buf += block_size; - } - - return retlen; -} - -static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len, - const u_char *write_buf) -{ - struct intel_spi *ispi = nor->priv; - size_t block_size, retlen = 0; - u32 val, status; - ssize_t ret; - - /* Not needed with HW sequencer write, make sure it is cleared */ - ispi->atomic_preopcode = 0; - - while (len > 0) { - block_size = min_t(size_t, len, INTEL_SPI_FIFO_SZ); - - /* Write cannot cross 4K boundary */ - block_size = min_t(loff_t, to + block_size, - round_up(to + 1, SZ_4K)) - to; - - writel(to, ispi->base + FADDR); - - val = readl(ispi->base + HSFSTS_CTL); - val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK); - val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE; - val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT; - val |= HSFSTS_CTL_FCYCLE_WRITE; - - ret = intel_spi_write_block(ispi, write_buf, block_size); - if (ret) { - dev_err(ispi->dev, "failed to write block\n"); - return ret; - } - - /* Start the write now */ - val |= HSFSTS_CTL_FGO; - writel(val, ispi->base + HSFSTS_CTL); - - ret = intel_spi_wait_hw_busy(ispi); - if (ret) { - dev_err(ispi->dev, "timeout\n"); - return ret; - } - - status = readl(ispi->base + HSFSTS_CTL); - if (status & HSFSTS_CTL_FCERR) - ret = -EIO; - else if (status & HSFSTS_CTL_AEL) - ret = -EACCES; - - if (ret < 0) { - dev_err(ispi->dev, "write error: %llx: %#x\n", to, - status); - return ret; - } - - len -= block_size; - to += block_size; - retlen += block_size; - write_buf += block_size; - } - - return retlen; -} - -static int intel_spi_erase(struct spi_nor *nor, loff_t offs) -{ - size_t erase_size, len = nor->mtd.erasesize; - struct intel_spi *ispi = nor->priv; - u32 val, status, cmd; - int ret; - - /* If the hardware can do 64k erase use that when possible */ - if (len >= SZ_64K && ispi->erase_64k) { - cmd = HSFSTS_CTL_FCYCLE_ERASE_64K; - erase_size = SZ_64K; - } else { - cmd = HSFSTS_CTL_FCYCLE_ERASE; - erase_size = SZ_4K; - } - - if (ispi->swseq_erase) { - while (len > 0) { - writel(offs, ispi->base + FADDR); - - ret = intel_spi_sw_cycle(ispi, nor->erase_opcode, - 0, OPTYPE_WRITE_WITH_ADDR); - if (ret) - return ret; - - offs += erase_size; - len -= erase_size; - } - - return 0; - } - - /* Not needed with HW sequencer erase, make sure it is cleared */ - ispi->atomic_preopcode = 0; - - while (len > 0) { - writel(offs, ispi->base + FADDR); - - val = readl(ispi->base + HSFSTS_CTL); - val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK); - val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE; - val |= cmd; - val |= HSFSTS_CTL_FGO; - writel(val, ispi->base + HSFSTS_CTL); - - ret = intel_spi_wait_hw_busy(ispi); - if (ret) - return ret; - - status = readl(ispi->base + HSFSTS_CTL); - if (status & HSFSTS_CTL_FCERR) - return -EIO; - else if (status & HSFSTS_CTL_AEL) - return -EACCES; - - offs += erase_size; - len -= erase_size; - } - - return 0; -} - -static bool intel_spi_is_protected(const struct intel_spi *ispi, - unsigned int base, unsigned int limit) -{ - int i; - - for (i = 0; i < ispi->pr_num; i++) { - u32 pr_base, pr_limit, pr_value; - - pr_value = readl(ispi->pregs + PR(i)); - if (!(pr_value & (PR_WPE | PR_RPE))) - continue; - - pr_limit = (pr_value & PR_LIMIT_MASK) >> PR_LIMIT_SHIFT; - pr_base = pr_value & PR_BASE_MASK; - - if (pr_base >= base && pr_limit <= limit) - return true; - } - - return false; -} - -/* - * There will be a single partition holding all enabled flash regions. We - * call this "BIOS". - */ -static void intel_spi_fill_partition(struct intel_spi *ispi, - struct mtd_partition *part) -{ - u64 end; - int i; - - memset(part, 0, sizeof(*part)); - - /* Start from the mandatory descriptor region */ - part->size = 4096; - part->name = "BIOS"; - - /* - * Now try to find where this partition ends based on the flash - * region registers. - */ - for (i = 1; i < ispi->nregions; i++) { - u32 region, base, limit; - - region = readl(ispi->base + FREG(i)); - base = region & FREG_BASE_MASK; - limit = (region & FREG_LIMIT_MASK) >> FREG_LIMIT_SHIFT; - - if (base >= limit || limit == 0) - continue; - - /* - * If any of the regions have protection bits set, make the - * whole partition read-only to be on the safe side. - */ - if (intel_spi_is_protected(ispi, base, limit)) - ispi->writeable = false; - - end = (limit << 12) + 4096; - if (end > part->size) - part->size = end; - } -} - -static const struct spi_nor_controller_ops intel_spi_controller_ops = { - .read_reg = intel_spi_read_reg, - .write_reg = intel_spi_write_reg, - .read = intel_spi_read, - .write = intel_spi_write, - .erase = intel_spi_erase, -}; - -struct intel_spi *intel_spi_probe(struct device *dev, - struct resource *mem, const struct intel_spi_boardinfo *info) -{ - const struct spi_nor_hwcaps hwcaps = { - .mask = SNOR_HWCAPS_READ | - SNOR_HWCAPS_READ_FAST | - SNOR_HWCAPS_PP, - }; - struct mtd_partition part; - struct intel_spi *ispi; - int ret; - - if (!info || !mem) - return ERR_PTR(-EINVAL); - - ispi = devm_kzalloc(dev, sizeof(*ispi), GFP_KERNEL); - if (!ispi) - return ERR_PTR(-ENOMEM); - - ispi->base = devm_ioremap_resource(dev, mem); - if (IS_ERR(ispi->base)) - return ERR_CAST(ispi->base); - - ispi->dev = dev; - ispi->info = info; - ispi->writeable = info->writeable; - - ret = intel_spi_init(ispi); - if (ret) - return ERR_PTR(ret); - - ispi->nor.dev = ispi->dev; - ispi->nor.priv = ispi; - ispi->nor.controller_ops = &intel_spi_controller_ops; - - ret = spi_nor_scan(&ispi->nor, NULL, &hwcaps); - if (ret) { - dev_info(dev, "failed to locate the chip\n"); - return ERR_PTR(ret); - } - - intel_spi_fill_partition(ispi, &part); - - /* Prevent writes if not explicitly enabled */ - if (!ispi->writeable || !writeable) - ispi->nor.mtd.flags &= ~MTD_WRITEABLE; - - ret = mtd_device_register(&ispi->nor.mtd, &part, 1); - if (ret) - return ERR_PTR(ret); - - return ispi; -} -EXPORT_SYMBOL_GPL(intel_spi_probe); - -int intel_spi_remove(struct intel_spi *ispi) -{ - return mtd_device_unregister(&ispi->nor.mtd); -} -EXPORT_SYMBOL_GPL(intel_spi_remove); - -MODULE_DESCRIPTION("Intel PCH/PCU SPI flash core driver"); -MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>"); -MODULE_LICENSE("GPL v2"); |