Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (120 commits)
  [MTD] Fix mtdoops.c compilation
  [MTD] [NOR] fix startup lock when using multiple nor flash chips
  [MTD] [DOC200x] eccbuf is statically defined and always evaluate to true
  [MTD] Fix maps/physmap.c compilation with CONFIG_PM
  [MTD] onenand: Add panic_write function to the onenand driver
  [MTD] mtdoops: Use the panic_write function when present
  [MTD] Add mtd panic_write function pointer
  [MTD] [NAND] Freescale enhanced Local Bus Controller FCM NAND support.
  [MTD] physmap.c: Add support for multiple resources
  [MTD] [NAND] Fix misparenthesization introduced by commit 78b65179...
  [MTD] [NAND] Fix Blackfin NFC ECC calculating bug with page size 512 bytes
  [MTD] [NAND] Remove wrong operation in PM function of the BF54x NFC driver
  [MTD] [NAND] Remove unused variable in plat_nand_remove
  [MTD] Unlocking all Intel flash that is locked on power up.
  [MTD] [NAND] at91_nand: Make mtdparts option can override board info
  [MTD] mtdoops: Various minor cleanups
  [MTD] mtdoops: Ensure sequential write to the buffer
  [MTD] mtdoops: Perform write operations in a workqueue
  [MTD] mtdoops: Add further error return code checking
  [MTD] [NOR] Test devtype, not definition in flash_probe(), drivers/mtd/devices/lart.c
  ...

11 files changed, 1780 insertions, 35 deletions

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 246d4512f64b..4a3c6759492b 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -93,7 +93,7 @@ config MTD_NAND_AU1550
 
 config MTD_NAND_BF5XX
 	tristate "Blackfin on-chip NAND Flash Controller driver"
-	depends on BF54x && MTD_NAND
+	depends on (BF54x || BF52x) && MTD_NAND
 	help
 	  This enables the Blackfin on-chip NAND flash controller
 
@@ -283,6 +283,12 @@ config MTD_NAND_CM_X270
 	tristate "Support for NAND Flash on CM-X270 modules"
 	depends on MTD_NAND && MACH_ARMCORE
 
+config MTD_NAND_PASEMI
+	tristate "NAND support for PA Semi PWRficient"
+	depends on MTD_NAND && PPC_PASEMI
+	help
+	  Enables support for NAND Flash interface on PA Semi PWRficient
+	  based boards
 
 config MTD_NAND_NANDSIM
 	tristate "Support for NAND Flash Simulator"
@@ -306,4 +312,22 @@ config MTD_ALAUDA
 	  These two (and possibly other) Alauda-based cardreaders for
 	  SmartMedia and xD allow raw flash access.
 
+config MTD_NAND_ORION
+	tristate "NAND Flash support for Marvell Orion SoC"
+	depends on ARCH_ORION && MTD_NAND
+	help
+	  This enables the NAND flash controller on Orion machines.
+
+	  No board specific support is done by this driver, each board
+	  must advertise a platform_device for the driver to attach.
+
+config MTD_NAND_FSL_ELBC
+	tristate "NAND support for Freescale eLBC controllers"
+	depends on MTD_NAND && PPC_OF
+	help
+	  Various Freescale chips, including the 8313, include a NAND Flash
+	  Controller Module with built-in hardware ECC capabilities.
+	  Enabling this option will enable you to use this to control
+	  external NAND devices.
+
 endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 3ad6c0165da3..80d575eeee96 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -29,5 +29,8 @@ obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
 obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
 obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
+obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
+obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
+obj-$(CONFIG_MTD_NAND_FSL_ELBC)		+= fsl_elbc_nand.o
 
 nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/at91_nand.c b/drivers/mtd/nand/at91_nand.c
index b2a5672df6e0..c9fb2acf4056 100644
--- a/drivers/mtd/nand/at91_nand.c
+++ b/drivers/mtd/nand/at91_nand.c
@@ -156,14 +156,14 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 	}
 
 #ifdef CONFIG_MTD_PARTITIONS
-	if (host->board->partition_info)
-		partitions = host->board->partition_info(mtd->size, &num_partitions);
 #ifdef CONFIG_MTD_CMDLINE_PARTS
-	else {
-		mtd->name = "at91_nand";
-		num_partitions = parse_mtd_partitions(mtd, part_probes, &partitions, 0);
-	}
+	mtd->name = "at91_nand";
+	num_partitions = parse_mtd_partitions(mtd, part_probes,
+					      &partitions, 0);
 #endif
+	if (num_partitions <= 0 && host->board->partition_info)
+		partitions = host->board->partition_info(mtd->size,
+							 &num_partitions);
 
 	if ((!partitions) || (num_partitions == 0)) {
 		printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index a52f3a737c39..747042ab094a 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -74,7 +74,22 @@ static int hardware_ecc = 1;
 static int hardware_ecc;
 #endif
 
-static unsigned short bfin_nfc_pin_req[] = {P_NAND_CE, P_NAND_RB, 0};
+static unsigned short bfin_nfc_pin_req[] =
+	{P_NAND_CE,
+	 P_NAND_RB,
+	 P_NAND_D0,
+	 P_NAND_D1,
+	 P_NAND_D2,
+	 P_NAND_D3,
+	 P_NAND_D4,
+	 P_NAND_D5,
+	 P_NAND_D6,
+	 P_NAND_D7,
+	 P_NAND_WE,
+	 P_NAND_RE,
+	 P_NAND_CLE,
+	 P_NAND_ALE,
+	 0};
 
 /*
  * Data structures for bf5xx nand flash controller driver
@@ -278,7 +293,6 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
 	u16 ecc0, ecc1;
 	u32 code[2];
 	u8 *p;
-	int bytes = 3, i;
 
 	/* first 4 bytes ECC code for 256 page size */
 	ecc0 = bfin_read_NFC_ECC0();
@@ -288,19 +302,24 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
 
 	dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]);
 
+	/* first 3 bytes in ecc_code for 256 page size */
+	p = (u8 *) code;
+	memcpy(ecc_code, p, 3);
+
 	/* second 4 bytes ECC code for 512 page size */
 	if (page_size == 512) {
 		ecc0 = bfin_read_NFC_ECC2();
 		ecc1 = bfin_read_NFC_ECC3();
 		code[1] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11);
-		bytes = 6;
+
+		/* second 3 bytes in ecc_code for second 256
+		 * bytes of 512 page size
+		 */
+		p = (u8 *) (code + 1);
+		memcpy((ecc_code + 3), p, 3);
 		dev_dbg(info->device, "returning ecc 0x%08x\n", code[1]);
 	}
 
-	p = (u8 *)code;
-	for (i = 0; i < bytes; i++)
-		ecc_code[i] = p[i];
-
 	return 0;
 }
 
@@ -507,12 +526,13 @@ static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info)
 
 	init_completion(&info->dma_completion);
 
+#ifdef CONFIG_BF54x
 	/* Setup DMAC1 channel mux for NFC which shared with SDH */
 	val = bfin_read_DMAC1_PERIMUX();
 	val &= 0xFFFE;
 	bfin_write_DMAC1_PERIMUX(val);
 	SSYNC();
-
+#endif
 	/* Request NFC DMA channel */
 	ret = request_dma(CH_NFC, "BF5XX NFC driver");
 	if (ret < 0) {
@@ -744,9 +764,6 @@ static int bf5xx_nand_resume(struct platform_device *dev)
 {
 	struct bf5xx_nand_info *info = platform_get_drvdata(dev);
 
-	if (info)
-		bf5xx_nand_hw_init(info);
-
 	return 0;
 }
 
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 1e811715211a..da6ceaa80ba1 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -11,6 +11,7 @@
 #undef DEBUG
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 #include <linux/rslib.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
@@ -52,6 +53,7 @@
 
 struct cafe_priv {
 	struct nand_chip nand;
+	struct mtd_partition *parts;
 	struct pci_dev *pdev;
 	void __iomem *mmio;
 	struct rs_control *rs;
@@ -84,6 +86,10 @@ static unsigned int numtimings;
 static int timing[3];
 module_param_array(timing, int, &numtimings, 0644);
 
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probes[] = { "RedBoot", NULL };
+#endif
+
 /* Hrm. Why isn't this already conditional on something in the struct device? */
 #define cafe_dev_dbg(dev, args...) do { if (debug) dev_dbg(dev, ##args); } while(0)
 
@@ -620,7 +626,9 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 {
 	struct mtd_info *mtd;
 	struct cafe_priv *cafe;
+	struct mtd_partition *parts;
 	uint32_t ctrl;
+	int nr_parts;
 	int err = 0;
 
 	/* Very old versions shared the same PCI ident for all three
@@ -787,7 +795,18 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 		goto out_irq;
 
 	pci_set_drvdata(pdev, mtd);
+
+	/* We register the whole device first, separate from the partitions */
 	add_mtd_device(mtd);
+
+#ifdef CONFIG_MTD_PARTITIONS
+	nr_parts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
+	if (nr_parts > 0) {
+		cafe->parts = parts;
+		dev_info(&cafe->pdev->dev, "%d RedBoot partitions found\n", nr_parts);
+		add_mtd_partitions(mtd, parts, nr_parts);
+	}
+#endif
 	goto out;
 
  out_irq:
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
new file mode 100644
index 000000000000..b025dfe0b274
--- /dev/null
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -0,0 +1,1244 @@
+/* Freescale Enhanced Local Bus Controller NAND driver
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor
+ *
+ * Authors: Nick Spence <nick.spence@freescale.com>,
+ *          Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+
+
+#define MAX_BANKS 8
+#define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */
+#define FCM_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait for FCM */
+
+struct elbc_bank {
+	__be32 br;             /**< Base Register  */
+#define BR_BA           0xFFFF8000
+#define BR_BA_SHIFT             15
+#define BR_PS           0x00001800
+#define BR_PS_SHIFT             11
+#define BR_PS_8         0x00000800  /* Port Size 8 bit */
+#define BR_PS_16        0x00001000  /* Port Size 16 bit */
+#define BR_PS_32        0x00001800  /* Port Size 32 bit */
+#define BR_DECC         0x00000600
+#define BR_DECC_SHIFT            9
+#define BR_DECC_OFF     0x00000000  /* HW ECC checking and generation off */
+#define BR_DECC_CHK     0x00000200  /* HW ECC checking on, generation off */
+#define BR_DECC_CHK_GEN 0x00000400  /* HW ECC checking and generation on */
+#define BR_WP           0x00000100
+#define BR_WP_SHIFT              8
+#define BR_MSEL         0x000000E0
+#define BR_MSEL_SHIFT            5
+#define BR_MS_GPCM      0x00000000  /* GPCM */
+#define BR_MS_FCM       0x00000020  /* FCM */
+#define BR_MS_SDRAM     0x00000060  /* SDRAM */
+#define BR_MS_UPMA      0x00000080  /* UPMA */
+#define BR_MS_UPMB      0x000000A0  /* UPMB */
+#define BR_MS_UPMC      0x000000C0  /* UPMC */
+#define BR_V            0x00000001
+#define BR_V_SHIFT               0
+#define BR_RES          ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
+
+	__be32 or;             /**< Base Register  */
+#define OR0 0x5004
+#define OR1 0x500C
+#define OR2 0x5014
+#define OR3 0x501C
+#define OR4 0x5024
+#define OR5 0x502C
+#define OR6 0x5034
+#define OR7 0x503C
+
+#define OR_FCM_AM               0xFFFF8000
+#define OR_FCM_AM_SHIFT                 15
+#define OR_FCM_BCTLD            0x00001000
+#define OR_FCM_BCTLD_SHIFT              12
+#define OR_FCM_PGS              0x00000400
+#define OR_FCM_PGS_SHIFT                10
+#define OR_FCM_CSCT             0x00000200
+#define OR_FCM_CSCT_SHIFT                9
+#define OR_FCM_CST              0x00000100
+#define OR_FCM_CST_SHIFT                 8
+#define OR_FCM_CHT              0x00000080
+#define OR_FCM_CHT_SHIFT                 7
+#define OR_FCM_SCY              0x00000070
+#define OR_FCM_SCY_SHIFT                 4
+#define OR_FCM_SCY_1            0x00000010
+#define OR_FCM_SCY_2            0x00000020
+#define OR_FCM_SCY_3            0x00000030
+#define OR_FCM_SCY_4            0x00000040
+#define OR_FCM_SCY_5            0x00000050
+#define OR_FCM_SCY_6            0x00000060
+#define OR_FCM_SCY_7            0x00000070
+#define OR_FCM_RST              0x00000008
+#define OR_FCM_RST_SHIFT                 3
+#define OR_FCM_TRLX             0x00000004
+#define OR_FCM_TRLX_SHIFT                2
+#define OR_FCM_EHTR             0x00000002
+#define OR_FCM_EHTR_SHIFT                1
+};
+
+struct elbc_regs {
+	struct elbc_bank bank[8];
+	u8 res0[0x28];
+	__be32 mar;             /**< UPM Address Register */
+	u8 res1[0x4];
+	__be32 mamr;            /**< UPMA Mode Register */
+	__be32 mbmr;            /**< UPMB Mode Register */
+	__be32 mcmr;            /**< UPMC Mode Register */
+	u8 res2[0x8];
+	__be32 mrtpr;           /**< Memory Refresh Timer Prescaler Register */
+	__be32 mdr;             /**< UPM Data Register */
+	u8 res3[0x4];
+	__be32 lsor;            /**< Special Operation Initiation Register */
+	__be32 lsdmr;           /**< SDRAM Mode Register */
+	u8 res4[0x8];
+	__be32 lurt;            /**< UPM Refresh Timer */
+	__be32 lsrt;            /**< SDRAM Refresh Timer */
+	u8 res5[0x8];
+	__be32 ltesr;           /**< Transfer Error Status Register */
+#define LTESR_BM   0x80000000
+#define LTESR_FCT  0x40000000
+#define LTESR_PAR  0x20000000
+#define LTESR_WP   0x04000000
+#define LTESR_ATMW 0x00800000
+#define LTESR_ATMR 0x00400000
+#define LTESR_CS   0x00080000
+#define LTESR_CC   0x00000001
+#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
+	__be32 ltedr;           /**< Transfer Error Disable Register */
+	__be32 lteir;           /**< Transfer Error Interrupt Register */
+	__be32 lteatr;          /**< Transfer Error Attributes Register */
+	__be32 ltear;           /**< Transfer Error Address Register */
+	u8 res6[0xC];
+	__be32 lbcr;            /**< Configuration Register */
+#define LBCR_LDIS  0x80000000
+#define LBCR_LDIS_SHIFT    31
+#define LBCR_BCTLC 0x00C00000
+#define LBCR_BCTLC_SHIFT   22
+#define LBCR_AHD   0x00200000
+#define LBCR_LPBSE 0x00020000
+#define LBCR_LPBSE_SHIFT   17
+#define LBCR_EPAR  0x00010000
+#define LBCR_EPAR_SHIFT    16
+#define LBCR_BMT   0x0000FF00
+#define LBCR_BMT_SHIFT      8
+#define LBCR_INIT  0x00040000
+	__be32 lcrr;            /**< Clock Ratio Register */
+#define LCRR_DBYP    0x80000000
+#define LCRR_DBYP_SHIFT      31
+#define LCRR_BUFCMDC 0x30000000
+#define LCRR_BUFCMDC_SHIFT   28
+#define LCRR_ECL     0x03000000
+#define LCRR_ECL_SHIFT       24
+#define LCRR_EADC    0x00030000
+#define LCRR_EADC_SHIFT      16
+#define LCRR_CLKDIV  0x0000000F
+#define LCRR_CLKDIV_SHIFT     0
+	u8 res7[0x8];
+	__be32 fmr;             /**< Flash Mode Register */
+#define FMR_CWTO     0x0000F000
+#define FMR_CWTO_SHIFT       12
+#define FMR_BOOT     0x00000800
+#define FMR_ECCM     0x00000100
+#define FMR_AL       0x00000030
+#define FMR_AL_SHIFT          4
+#define FMR_OP       0x00000003
+#define FMR_OP_SHIFT          0
+	__be32 fir;             /**< Flash Instruction Register */
+#define FIR_OP0      0xF0000000
+#define FIR_OP0_SHIFT        28
+#define FIR_OP1      0x0F000000
+#define FIR_OP1_SHIFT        24
+#define FIR_OP2      0x00F00000
+#define FIR_OP2_SHIFT        20
+#define FIR_OP3      0x000F0000
+#define FIR_OP3_SHIFT        16
+#define FIR_OP4      0x0000F000
+#define FIR_OP4_SHIFT        12
+#define FIR_OP5      0x00000F00
+#define FIR_OP5_SHIFT         8
+#define FIR_OP6      0x000000F0
+#define FIR_OP6_SHIFT         4
+#define FIR_OP7      0x0000000F
+#define FIR_OP7_SHIFT         0
+#define FIR_OP_NOP   0x0	/* No operation and end of sequence */
+#define FIR_OP_CA    0x1        /* Issue current column address */
+#define FIR_OP_PA    0x2        /* Issue current block+page address */
+#define FIR_OP_UA    0x3        /* Issue user defined address */
+#define FIR_OP_CM0   0x4        /* Issue command from FCR[CMD0] */
+#define FIR_OP_CM1   0x5        /* Issue command from FCR[CMD1] */
+#define FIR_OP_CM2   0x6        /* Issue command from FCR[CMD2] */
+#define FIR_OP_CM3   0x7        /* Issue command from FCR[CMD3] */
+#define FIR_OP_WB    0x8        /* Write FBCR bytes from FCM buffer */
+#define FIR_OP_WS    0x9        /* Write 1 or 2 bytes from MDR[AS] */
+#define FIR_OP_RB    0xA        /* Read FBCR bytes to FCM buffer */
+#define FIR_OP_RS    0xB        /* Read 1 or 2 bytes to MDR[AS] */
+#define FIR_OP_CW0   0xC        /* Wait then issue FCR[CMD0] */
+#define FIR_OP_CW1   0xD        /* Wait then issue FCR[CMD1] */
+#define FIR_OP_RBW   0xE        /* Wait then read FBCR bytes */
+#define FIR_OP_RSW   0xE        /* Wait then read 1 or 2 bytes */
+	__be32 fcr;             /**< Flash Command Register */
+#define FCR_CMD0     0xFF000000
+#define FCR_CMD0_SHIFT       24
+#define FCR_CMD1     0x00FF0000
+#define FCR_CMD1_SHIFT       16
+#define FCR_CMD2     0x0000FF00
+#define FCR_CMD2_SHIFT        8
+#define FCR_CMD3     0x000000FF
+#define FCR_CMD3_SHIFT        0
+	__be32 fbar;            /**< Flash Block Address Register */
+#define FBAR_BLK     0x00FFFFFF
+	__be32 fpar;            /**< Flash Page Address Register */
+#define FPAR_SP_PI   0x00007C00
+#define FPAR_SP_PI_SHIFT     10
+#define FPAR_SP_MS   0x00000200
+#define FPAR_SP_CI   0x000001FF
+#define FPAR_SP_CI_SHIFT      0
+#define FPAR_LP_PI   0x0003F000
+#define FPAR_LP_PI_SHIFT     12
+#define FPAR_LP_MS   0x00000800
+#define FPAR_LP_CI   0x000007FF
+#define FPAR_LP_CI_SHIFT      0
+	__be32 fbcr;            /**< Flash Byte Count Register */
+#define FBCR_BC      0x00000FFF
+	u8 res11[0x8];
+	u8 res8[0xF00];
+};
+
+struct fsl_elbc_ctrl;
+
+/* mtd information per set */
+
+struct fsl_elbc_mtd {
+	struct mtd_info mtd;
+	struct nand_chip chip;
+	struct fsl_elbc_ctrl *ctrl;
+
+	struct device *dev;
+	int bank;               /* Chip select bank number           */
+	u8 __iomem *vbase;      /* Chip select base virtual address  */
+	int page_size;          /* NAND page size (0=512, 1=2048)    */
+	unsigned int fmr;       /* FCM Flash Mode Register value     */
+};
+
+/* overview of the fsl elbc controller */
+
+struct fsl_elbc_ctrl {
+	struct nand_hw_control controller;
+	struct fsl_elbc_mtd *chips[MAX_BANKS];
+
+	/* device info */
+	struct device *dev;
+	struct elbc_regs __iomem *regs;
+	int irq;
+	wait_queue_head_t irq_wait;
+	unsigned int irq_status; /* status read from LTESR by irq handler */
+	u8 __iomem *addr;        /* Address of assigned FCM buffer        */
+	unsigned int page;       /* Last page written to / read from      */
+	unsigned int read_bytes; /* Number of bytes read during command   */
+	unsigned int column;     /* Saved column from SEQIN               */
+	unsigned int index;      /* Pointer to next byte to 'read'        */
+	unsigned int status;     /* status read from LTESR after last op  */
+	unsigned int mdr;        /* UPM/FCM Data Register value           */
+	unsigned int use_mdr;    /* Non zero if the MDR is to be set      */
+	unsigned int oob;        /* Non zero if operating on OOB data     */
+	char *oob_poi;           /* Place to write ECC after read back    */
+};
+
+/* These map to the positions used by the FCM hardware ECC generator */
+
+/* Small Page FLASH with FMR[ECCM] = 0 */
+static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = {
+	.eccbytes = 3,
+	.eccpos = {6, 7, 8},
+	.oobfree = { {0, 5}, {9, 7} },
+	.oobavail = 12,
+};
+
+/* Small Page FLASH with FMR[ECCM] = 1 */
+static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = {
+	.eccbytes = 3,
+	.eccpos = {8, 9, 10},
+	.oobfree = { {0, 5}, {6, 2}, {11, 5} },
+	.oobavail = 12,
+};
+
+/* Large Page FLASH with FMR[ECCM] = 0 */
+static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = {
+	.eccbytes = 12,
+	.eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
+	.oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
+	.oobavail = 48,
+};
+
+/* Large Page FLASH with FMR[ECCM] = 1 */
+static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
+	.eccbytes = 12,
+	.eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
+	.oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
+	.oobavail = 48,
+};
+
+/*=================================*/
+
+/*
+ * Set up the FCM hardware block and page address fields, and the fcm
+ * structure addr field to point to the correct FCM buffer in memory
+ */
+static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_elbc_mtd *priv = chip->priv;
+	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct elbc_regs __iomem *lbc = ctrl->regs;
+	int buf_num;
+
+	ctrl->page = page_addr;
+
+	out_be32(&lbc->fbar,
+	         page_addr >> (chip->phys_erase_shift - chip->page_shift));
+
+	if (priv->page_size) {
+		out_be32(&lbc->fpar,
+		         ((page_addr << FPAR_LP_PI_SHIFT) & FPAR_LP_PI) |
+		         (oob ? FPAR_LP_MS : 0) | column);
+		buf_num = (page_addr & 1) << 2;
+	} else {
+		out_be32(&lbc->fpar,
+		         ((page_addr << FPAR_SP_PI_SHIFT) & FPAR_SP_PI) |
+		         (oob ? FPAR_SP_MS : 0) | column);
+		buf_num = page_addr & 7;
+	}
+
+	ctrl->addr = priv->vbase + buf_num * 1024;
+	ctrl->index = column;
+
+	/* for OOB data point to the second half of the buffer */
+	if (oob)
+		ctrl->index += priv->page_size ? 2048 : 512;
+
+	dev_vdbg(ctrl->dev, "set_addr: bank=%d, ctrl->addr=0x%p (0x%p), "
+	                    "index %x, pes %d ps %d\n",
+	         buf_num, ctrl->addr, priv->vbase, ctrl->index,
+	         chip->phys_erase_shift, chip->page_shift);
+}
+
+/*
+ * execute FCM command and wait for it to complete
+ */
+static int fsl_elbc_run_command(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_elbc_mtd *priv = chip->priv;
+	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct elbc_regs __iomem *lbc = ctrl->regs;
+
+	/* Setup the FMR[OP] to execute without write protection */
+	out_be32(&lbc->fmr, priv->fmr | 3);
+	if (ctrl->use_mdr)
+		out_be32(&lbc->mdr, ctrl->mdr);
+
+	dev_vdbg(ctrl->dev,
+	         "fsl_elbc_run_command: fmr=%08x fir=%08x fcr=%08x\n",
+	         in_be32(&lbc->fmr), in_be32(&lbc->fir), in_be32(&lbc->fcr));
+	dev_vdbg(ctrl->dev,
+	         "fsl_elbc_run_command: fbar=%08x fpar=%08x "
+	         "fbcr=%08x bank=%d\n",
+	         in_be32(&lbc->fbar), in_be32(&lbc->fpar),
+	         in_be32(&lbc->fbcr), priv->bank);
+
+	/* execute special operation */
+	out_be32(&lbc->lsor, priv->bank);
+
+	/* wait for FCM complete flag or timeout */
+	ctrl->irq_status = 0;
+	wait_event_timeout(ctrl->irq_wait, ctrl->irq_status,
+	                   FCM_TIMEOUT_MSECS * HZ/1000);
+	ctrl->status = ctrl->irq_status;
+
+	/* store mdr value in case it was needed */
+	if (ctrl->use_mdr)
+		ctrl->mdr = in_be32(&lbc->mdr);
+
+	ctrl->use_mdr = 0;
+
+	dev_vdbg(ctrl->dev,
+	         "fsl_elbc_run_command: stat=%08x mdr=%08x fmr=%08x\n",
+	         ctrl->status, ctrl->mdr, in_be32(&lbc->fmr));
+
+	/* returns 0 on success otherwise non-zero) */
+	return ctrl->status == LTESR_CC ? 0 : -EIO;
+}
+
+static void fsl_elbc_do_read(struct nand_chip *chip, int oob)
+{
+	struct fsl_elbc_mtd *priv = chip->priv;
+	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct elbc_regs __iomem *lbc = ctrl->regs;
+
+	if (priv->page_size) {
+		out_be32(&lbc->fir,
+		         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+		         (FIR_OP_CA  << FIR_OP1_SHIFT) |
+		         (FIR_OP_PA  << FIR_OP2_SHIFT) |
+		         (FIR_OP_CW1 << FIR_OP3_SHIFT) |
+		         (FIR_OP_RBW << FIR_OP4_SHIFT));
+
+		out_be32(&lbc->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) |
+		                    (NAND_CMD_READSTART << FCR_CMD1_SHIFT));
+	} else {
+		out_be32(&lbc->fir,
+		         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+		         (FIR_OP_CA  << FIR_OP1_SHIFT) |
+		         (FIR_OP_PA  << FIR_OP2_SHIFT) |
+		         (FIR_OP_RBW << FIR_OP3_SHIFT));
+
+		if (oob)
+			out_be32(&lbc->fcr, NAND_CMD_READOOB << FCR_CMD0_SHIFT);
+		else
+			out_be32(&lbc->fcr, NAND_CMD_READ0 << FCR_CMD0_SHIFT);
+	}
+}
+
+/* cmdfunc send commands to the FCM */
+static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
+                             int column, int page_addr)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_elbc_mtd *priv = chip->priv;
+	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	struct elbc_regs __iomem *lbc = ctrl->regs;
+
+	ctrl->use_mdr = 0;
+
+	/* clear the read buffer */
+	ctrl->read_bytes = 0;
+	if (command != NAND_CMD_PAGEPROG)
+		ctrl->index = 0;
+
+	switch (command) {
+	/* READ0 and READ1 read the entire buffer to use hardware ECC. */
+	case NAND_CMD_READ1:
+		column += 256;
+
+	/* fall-through */
+	case NAND_CMD_READ0:
+		dev_dbg(ctrl->dev,
+		        "fsl_elbc_cmdfunc: NAND_CMD_READ0, page_addr:"
+		        " 0x%x, column: 0x%x.\n", page_addr, column);
+
+
+		out_be32(&lbc->fbcr, 0); /* read entire page to enable ECC */
+		set_addr(mtd, 0, page_addr, 0);
+
+		ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+		ctrl->index += column;
+
+		fsl_elbc_do_read(chip, 0);
+		fsl_elbc_run_command(mtd);
+		return;
+
+	/* READOOB reads only the OOB because no ECC is performed. */
+	case NAND_CMD_READOOB:
+		dev_vdbg(ctrl->dev,
+		         "fsl_elbc_cmdfunc: NAND_CMD_READOOB, page_addr:"
+			 " 0x%x, column: 0x%x.\n", page_addr, column);
+
+		out_be32(&lbc->fbcr, mtd->oobsize - column);
+		set_addr(mtd, column, page_addr, 1);
+
+		ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+
+		fsl_elbc_do_read(chip, 1);
+		fsl_elbc_run_command(mtd);
+		return;
+
+	/* READID must read all 5 possible bytes while CEB is active */
+	case NAND_CMD_READID:
+		dev_vdbg(ctrl->dev, "fsl_elbc_cmdfunc: NAND_CMD_READID.\n");
+
+		out_be32(&lbc->fir, (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+		                    (FIR_OP_UA  << FIR_OP1_SHIFT) |
+		                    (FIR_OP_RBW << FIR_OP2_SHIFT));
+		out_be32(&lbc->fcr, NAND_CMD_READID << FCR_CMD0_SHIFT);
+		/* 5 bytes for manuf, device and exts */
+		out_be32(&lbc->fbcr, 5);
+		ctrl->read_bytes = 5;
+		ctrl->use_mdr = 1;
+		ctrl->mdr = 0;
+
+		set_addr(mtd, 0, 0, 0);
+		fsl_elbc_run_command(mtd);
+		return;
+
+	/* ERASE1 stores the block and page address */
+	case NAND_CMD_ERASE1:
+		dev_vdbg(ctrl->dev,
+		         "fsl_elbc_cmdfunc: NAND_CMD_ERASE1, "
+		         "page_addr: 0x%x.\n", page_addr);
+		set_addr(mtd, 0, page_addr, 0);
+		return;
+
+	/* ERASE2 uses the block and page address from ERASE1 */
+	case NAND_CMD_ERASE2:
+		dev_vdbg(ctrl->dev, "fsl_elbc_cmdfunc: NAND_CMD_ERASE2.\n");
+
+		out_be32(&lbc->fir,
+		         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+		         (FIR_OP_PA  << FIR_OP1_SHIFT) |
+		         (FIR_OP_CM1 << FIR_OP2_SHIFT));
+
+		out_be32(&lbc->fcr,
+		         (NAND_CMD_ERASE1 << FCR_CMD0_SHIFT) |
+		         (NAND_CMD_ERASE2 << FCR_CMD1_SHIFT));
+
+		out_be32(&lbc->fbcr, 0);
+		ctrl->read_bytes = 0;
+
+		fsl_elbc_run_command(mtd);
+		return;
+
+	/* SEQIN sets up the addr buffer and all registers except the length */
+	case NAND_CMD_SEQIN: {
+		__be32 fcr;
+		dev_vdbg(ctrl->dev,
+		         "fsl_elbc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG, "
+		         "page_addr: 0x%x, column: 0x%x.\n",
+		         page_addr, column);
+
+		ctrl->column = column;
+		ctrl->oob = 0;
+
+		fcr = (NAND_CMD_PAGEPROG << FCR_CMD1_SHIFT) |
+		      (NAND_CMD_SEQIN << FCR_CMD2_SHIFT);
+
+		if (priv->page_size) {
+			out_be32(&lbc->fir,
+			         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+			         (FIR_OP_CA  << FIR_OP1_SHIFT) |
+			         (FIR_OP_PA  << FIR_OP2_SHIFT) |
+			         (FIR_OP_WB  << FIR_OP3_SHIFT) |
+			         (FIR_OP_CW1 << FIR_OP4_SHIFT));
+
+			fcr |= NAND_CMD_READ0 << FCR_CMD0_SHIFT;
+		} else {
+			out_be32(&lbc->fir,
+			         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+			         (FIR_OP_CM2 << FIR_OP1_SHIFT) |
+			         (FIR_OP_CA  << FIR_OP2_SHIFT) |
+			         (FIR_OP_PA  << FIR_OP3_SHIFT) |
+			         (FIR_OP_WB  << FIR_OP4_SHIFT) |
+			         (FIR_OP_CW1 << FIR_OP5_SHIFT));
+
+			if (column >= mtd->writesize) {
+				/* OOB area --> READOOB */
+				column -= mtd->writesize;
+				fcr |= NAND_CMD_READOOB << FCR_CMD0_SHIFT;
+				ctrl->oob = 1;
+			} else if (column < 256) {
+				/* First 256 bytes --> READ0 */
+				fcr |= NAND_CMD_READ0 << FCR_CMD0_SHIFT;
+			} else {
+				/* Second 256 bytes --> READ1 */
+				fcr |= NAND_CMD_READ1 << FCR_CMD0_SHIFT;
+			}
+		}
+
+		out_be32(&lbc->fcr, fcr);
+		set_addr(mtd, column, page_addr, ctrl->oob);
+		return;
+	}
+
+	/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
+	case NAND_CMD_PAGEPROG: {
+		int full_page;
+		dev_vdbg(ctrl->dev,
+		         "fsl_elbc_cmdfunc: NAND_CMD_PAGEPROG "
+		         "writing %d bytes.\n", ctrl->index);
+
+		/* if the write did not start at 0 or is not a full page
+		 * then set the exact length, otherwise use a full page
+		 * write so the HW generates the ECC.
+		 */
+		if (ctrl->oob || ctrl->column != 0 ||
+		    ctrl->index != mtd->writesize + mtd->oobsize) {
+			out_be32(&lbc->fbcr, ctrl->index);
+			full_page = 0;
+		} else {
+			out_be32(&lbc->fbcr, 0);
+			full_page = 1;
+		}
+
+		fsl_elbc_run_command(mtd);
+
+		/* Read back the page in order to fill in the ECC for the
+		 * caller.  Is this really needed?
+		 */
+		if (full_page && ctrl->oob_poi) {
+			out_be32(&lbc->fbcr, 3);
+			set_addr(mtd, 6, page_addr, 1);
+
+			ctrl->read_bytes = mtd->writesize + 9;
+
+			fsl_elbc_do_read(chip, 1);
+			fsl_elbc_run_command(mtd);
+
+			memcpy_fromio(ctrl->oob_poi + 6,
+			              &ctrl->addr[ctrl->index], 3);
+			ctrl->index += 3;
+		}
+
+		ctrl->oob_poi = NULL;
+		return;
+	}
+
+	/* CMD_STATUS must read the status byte while CEB is active */
+	/* Note - it does not wait for the ready line */
+	case NAND_CMD_STATUS:
+		out_be32(&lbc->fir,
+		         (FIR_OP_CM0 << FIR_OP0_SHIFT) |
+		         (FIR_OP_RBW << FIR_OP1_SHIFT));
+		out_be32(&lbc->fcr, NAND_CMD_STATUS << FCR_CMD0_SHIFT);
+		out_be32(&lbc->fbcr, 1);
+		set_addr(mtd, 0, 0, 0);
+		ctrl->read_bytes = 1;
+
+		fsl_elbc_run_command(mtd);
+
+		/* The chip always seems to report that it is
+		 * write-protected, even when it is not.
+		 */
+		setbits8(ctrl->addr, NAND_STATUS_WP);
+		return;
+
+	/* RESET without waiting for the ready line */
+	case NAND_CMD_RESET:
+		dev_dbg(ctrl->dev, "fsl_elbc_cmdfunc: NAND_CMD_RESET.\n");
+		out_be32(&lbc->fir, FIR_OP_CM0 << FIR_OP0_SHIFT);
+		out_be32(&lbc->fcr, NAND_CMD_RESET << FCR_CMD0_SHIFT);
+		fsl_elbc_run_command(mtd);
+		return;
+
+	default:
+		dev_err(ctrl->dev,
+		        "fsl_elbc_cmdfunc: error, unsupported command 0x%x.\n",
+		        command);
+	}
+}
+
+static void fsl_elbc_select_chip(struct mtd_info *mtd, int chip)
+{
+	/* The hardware does not seem to support multiple
+	 * chips per bank.
+	 */
+}
+
+/*
+ * Write buf to the FCM Controller Data Buffer
+ */
+static void fsl_elbc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_elbc_mtd *priv = chip->priv;
+	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+	unsigned int bufsize = mtd->writesize + mtd->oobsize;
+
+	if (len < 0) {
+		dev_err(ctrl->dev, "write_buf of %d bytes", len);
+		ctrl->status = 0;
+		return;
+	}
+
+	if ((unsigned int)len > bufsize - ctrl->index) {
+		dev_err(ctrl->dev,
+		        "write_buf beyond end of buffer "
+		        "(%d requested, %u available)\n",
+		        len, bufsize - ctrl->index);
+		len = bufsize - ctrl->index;
+	}
+
+	memcpy_toio(&ctrl->addr[ctrl->index], buf, len);
+	ctrl->index += len;
+}
+