Merge tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "This time, this pull request contains changes crossing subsystems and
  archs/platforms, which is mainly because of a bigger modernization of
  moving from legacy GPIO to GPIO descriptors for MMC (by Linus
  Walleij).

  Additionally, once again, I am funneling changes to
  drivers/misc/cardreader/* and drivers/memstick/* through my MMC tree,
  mostly due to that we lack a maintainer for these.

  Summary:

  MMC core:
   - Cleanup BKOPS support
   - Introduce MMC_CAP_SYNC_RUNTIME_PM
   - slot-gpio: Delete legacy slot GPIO handling

  MMC host:
   - alcor: Add new mmc host driver for Alcor Micro PCI based cardreader
   - bcm2835: Several improvements to better recover from errors
   - jz4740: Rework and fixup pre|post_req support
   - mediatek: Add support for SDIO IRQs
   - meson-gx: Improve clock phase management
   - meson-gx: Stop descriptor on errors
   - mmci: Complete the sbc error path by sending a stop command
   - renesas_sdhi/tmio: Fixup reset/resume operations
   - renesas_sdhi: Add support for r8a774c0 and R7S9210
   - renesas_sdhi: Whitelist R8A77990 SDHI
   - renesas_sdhi: Fixup eMMC HS400 compatibility issues for H3 and M3-W
   - rtsx_usb_sdmmc: Re-work card detection/removal support
   - rtsx_usb_sdmmc: Re-work runtime PM support
   - sdhci: Fix timeout loops for some variant drivers
   - sdhci: Improve support for error handling due to failing commands
   - sdhci-acpi/pci: Disable LED control for Intel BYT-based controllers
   - sdhci_am654: Add new SDHCI variant driver to support TI's AM654 SOCs
   - sdhci-of-esdhc: Add support for eMMC HS400 mode
   - sdhci-omap: Fixup reset support
   - sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures
   - sdhci-msm: Fixup sporadic write transfers issues for SDR104/HS200
   - sdhci-msm: Fixup dynamical clock gating issues
   - various: Complete converting all hosts into using slot GPIO descriptors

  Other:
   - Move GPIO mmc platform data for mips/sh/arm to GPIO descriptors
   - Add new Alcor Micro cardreader PCI driver
   - Support runtime power management for memstick rtsx_usb_ms driver
   - Use USB remote wakeups for card detection for rtsx_usb misc driver"

* tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (99 commits)
  mmc: mediatek: Add MMC_CAP_SDIO_IRQ support
  mmc: renesas_sdhi_internal_dmac: Whitelist r8a774c0
  dt-bindings: mmc: renesas_sdhi: Add r8a774c0 support
  mmc: core: Cleanup BKOPS support
  mmc: core: Drop redundant check in mmc_send_hpi_cmd()
  mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929)
  dt-bindings: sdhci-omap: Add note for cpu_thermal
  mmc: sdhci-acpi: Disable LED control for Intel BYT-based controllers
  mmc: sdhci-pci: Disable LED control for Intel BYT-based controllers
  mmc: sdhci: Add quirk to disable LED control
  mmc: mmci: add variant property to set command stop bit
  misc: alcor_pci: fix spelling mistake "invailid" -> "invalid"
  mmc: meson-gx: add signal resampling
  mmc: meson-gx: align default phase on soc vendor tree
  mmc: meson-gx: remove useless lock
  mmc: meson-gx: make sure the descriptor is stopped on errors
  mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver
  dt-bindings: mmc: sdhci-of-arasan: Add deprecated message for AM65
  dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's AM654 SOCs
  mmc: sdhci-msm: avoid unused function warning
  ...

46 files changed, 2574 insertions, 788 deletions

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 62e7619d5a4d..aef1185f383d 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -1960,7 +1960,7 @@ static void mmc_blk_urgent_bkops(struct mmc_queue *mq,
 				 struct mmc_queue_req *mqrq)
 {
 	if (mmc_blk_urgent_bkops_needed(mq, mqrq))
-		mmc_start_bkops(mq->card, true);
+		mmc_run_bkops(mq->card);
 }
 
 void mmc_blk_mq_complete(struct request *req)
diff --git a/drivers/mmc/core/card.h b/drivers/mmc/core/card.h
index 1170feb8f969..eef301452406 100644
--- a/drivers/mmc/core/card.h
+++ b/drivers/mmc/core/card.h
@@ -23,15 +23,13 @@
 #define MMC_STATE_BLOCKADDR	(1<<2)		/* card uses block-addressing */
 #define MMC_CARD_SDXC		(1<<3)		/* card is SDXC */
 #define MMC_CARD_REMOVED	(1<<4)		/* card has been removed */
-#define MMC_STATE_DOING_BKOPS	(1<<5)		/* card is doing BKOPS */
-#define MMC_STATE_SUSPENDED	(1<<6)		/* card is suspended */
+#define MMC_STATE_SUSPENDED	(1<<5)		/* card is suspended */
 
 #define mmc_card_present(c)	((c)->state & MMC_STATE_PRESENT)
 #define mmc_card_readonly(c)	((c)->state & MMC_STATE_READONLY)
 #define mmc_card_blockaddr(c)	((c)->state & MMC_STATE_BLOCKADDR)
 #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC)
 #define mmc_card_removed(c)	((c) && ((c)->state & MMC_CARD_REMOVED))
-#define mmc_card_doing_bkops(c)	((c)->state & MMC_STATE_DOING_BKOPS)
 #define mmc_card_suspended(c)	((c)->state & MMC_STATE_SUSPENDED)
 
 #define mmc_card_set_present(c)	((c)->state |= MMC_STATE_PRESENT)
@@ -39,8 +37,6 @@
 #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
 #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
 #define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
-#define mmc_card_set_doing_bkops(c)	((c)->state |= MMC_STATE_DOING_BKOPS)
-#define mmc_card_clr_doing_bkops(c)	((c)->state &= ~MMC_STATE_DOING_BKOPS)
 #define mmc_card_set_suspended(c) ((c)->state |= MMC_STATE_SUSPENDED)
 #define mmc_card_clr_suspended(c) ((c)->state &= ~MMC_STATE_SUSPENDED)
 
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 50a5c340307b..5bd58b95d318 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -887,7 +887,10 @@ void mmc_release_host(struct mmc_host *host)
 		spin_unlock_irqrestore(&host->lock, flags);
 		wake_up(&host->wq);
 		pm_runtime_mark_last_busy(mmc_dev(host));
-		pm_runtime_put_autosuspend(mmc_dev(host));
+		if (host->caps & MMC_CAP_SYNC_RUNTIME_PM)
+			pm_runtime_put_sync_suspend(mmc_dev(host));
+		else
+			pm_runtime_put_autosuspend(mmc_dev(host));
 	}
 }
 EXPORT_SYMBOL(mmc_release_host);
@@ -2413,20 +2416,6 @@ int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen)
 }
 EXPORT_SYMBOL(mmc_set_blocklen);
 
-int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount,
-			bool is_rel_write)
-{
-	struct mmc_command cmd = {};
-
-	cmd.opcode = MMC_SET_BLOCK_COUNT;
-	cmd.arg = blockcount & 0x0000FFFF;
-	if (is_rel_write)
-		cmd.arg |= 1 << 31;
-	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
-	return mmc_wait_for_cmd(card->host, &cmd, 5);
-}
-EXPORT_SYMBOL(mmc_set_blockcount);
-
 static void mmc_hw_reset_for_init(struct mmc_host *host)
 {
 	mmc_pwrseq_reset(host);
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 087ba68b2920..8fb6bc37f808 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -118,8 +118,6 @@ int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
 unsigned int mmc_calc_max_discard(struct mmc_card *card);
 
 int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen);
-int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount,
-			bool is_rel_write);
 
 int __mmc_claim_host(struct mmc_host *host, struct mmc_ctx *ctx,
 		     atomic_t *abort);
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 55997cf84b39..da892a599524 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1181,6 +1181,9 @@ static int mmc_select_hs400(struct mmc_card *card)
 	if (err)
 		goto out_err;
 
+	if (host->ops->hs400_prepare_ddr)
+		host->ops->hs400_prepare_ddr(host);
+
 	/* Switch card to DDR */
 	err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 			 EXT_CSD_BUS_WIDTH,
@@ -2011,12 +2014,6 @@ static int _mmc_suspend(struct mmc_host *host, bool is_suspend)
 	if (mmc_card_suspended(host->card))
 		goto out;
 
-	if (mmc_card_doing_bkops(host->card)) {
-		err = mmc_stop_bkops(host->card);
-		if (err)
-			goto out;
-	}
-
 	err = mmc_flush_cache(host->card);
 	if (err)
 		goto out;
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 873b2aa0c155..9054329fe903 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -802,12 +802,6 @@ static int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
 	unsigned int opcode;
 	int err;
 
-	if (!card->ext_csd.hpi) {
-		pr_warn("%s: Card didn't support HPI command\n",
-			mmc_hostname(card->host));
-		return -EINVAL;
-	}
-
 	opcode = card->ext_csd.hpi_cmd;
 	if (opcode == MMC_STOP_TRANSMISSION)
 		cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
@@ -897,34 +891,6 @@ int mmc_can_ext_csd(struct mmc_card *card)
 	return (card && card->csd.mmca_vsn > CSD_SPEC_VER_3);
 }
 
-/**
- *	mmc_stop_bkops - stop ongoing BKOPS
- *	@card: MMC card to check BKOPS
- *
- *	Send HPI command to stop ongoing background operations to
- *	allow rapid servicing of foreground operations, e.g. read/
- *	writes. Wait until the card comes out of the programming state
- *	to avoid errors in servicing read/write requests.
- */
-int mmc_stop_bkops(struct mmc_card *card)
-{
-	int err = 0;
-
-	err = mmc_interrupt_hpi(card);
-
-	/*
-	 * If err is EINVAL, we can't issue an HPI.
-	 * It should complete the BKOPS.
-	 */
-	if (!err || (err == -EINVAL)) {
-		mmc_card_clr_doing_bkops(card);
-		mmc_retune_release(card->host);
-		err = 0;
-	}
-
-	return err;
-}
-
 static int mmc_read_bkops_status(struct mmc_card *card)
 {
 	int err;
@@ -941,22 +907,17 @@ static int mmc_read_bkops_status(struct mmc_card *card)
 }
 
 /**
- *	mmc_start_bkops - start BKOPS for supported cards
- *	@card: MMC card to start BKOPS
- *	@from_exception: A flag to indicate if this function was
- *			 called due to an exception raised by the card
+ *	mmc_run_bkops - Run BKOPS for supported cards
+ *	@card: MMC card to run BKOPS for
  *
- *	Start background operations whenever requested.
- *	When the urgent BKOPS bit is set in a R1 command response
- *	then background operations should be started immediately.
+ *	Run background operations synchronously for cards having manual BKOPS
+ *	enabled and in case it reports urgent BKOPS level.
 */
-void mmc_start_bkops(struct mmc_card *card, bool from_exception)
+void mmc_run_bkops(struct mmc_card *card)
 {
 	int err;
-	int timeout;
-	bool use_busy_signal;
 
-	if (!card->ext_csd.man_bkops_en || mmc_card_doing_bkops(card))
+	if (!card->ext_csd.man_bkops_en)
 		return;
 
 	err = mmc_read_bkops_status(card);
@@ -966,44 +927,26 @@ void mmc_start_bkops(struct mmc_card *card, bool from_exception)
 		return;
 	}
 
-	if (!card->ext_csd.raw_bkops_status)
-		return;
-
-	if (card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2 &&
-	    from_exception)
+	if (!card->ext_csd.raw_bkops_status ||
+	    card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2)
 		return;
 
-	if (card->ext_csd.raw_bkops_status >= EXT_CSD_BKOPS_LEVEL_2) {
-		timeout = MMC_OPS_TIMEOUT_MS;
-		use_busy_signal = true;
-	} else {
-		timeout = 0;
-		use_busy_signal = false;
-	}
-
 	mmc_retune_hold(card->host);
 
-	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-			EXT_CSD_BKOPS_START, 1, timeout, 0,
-			use_busy_signal, true, false);
-	if (err) {
+	/*
+	 * For urgent BKOPS status, LEVEL_2 and higher, let's execute
+	 * synchronously. Future wise, we may consider to start BKOPS, for less
+	 * urgent levels by using an asynchronous background task, when idle.
+	 */
+	err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+			EXT_CSD_BKOPS_START, 1, MMC_OPS_TIMEOUT_MS);
+	if (err)
 		pr_warn("%s: Error %d starting bkops\n",
 			mmc_hostname(card->host), err);
-		mmc_retune_release(card->host);
-		return;
-	}
 
-	/*
-	 * For urgent bkops status (LEVEL_2 and more)
-	 * bkops executed synchronously, otherwise
-	 * the operation is in progress
-	 */
-	if (!use_busy_signal)
-		mmc_card_set_doing_bkops(card);
-	else
-		mmc_retune_release(card->host);
+	mmc_retune_release(card->host);
 }
-EXPORT_SYMBOL(mmc_start_bkops);
+EXPORT_SYMBOL(mmc_run_bkops);
 
 /*
  * Flush the cache to the non-volatile storage.
diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
index a1390d486381..018a5e3f66d6 100644
--- a/drivers/mmc/core/mmc_ops.h
+++ b/drivers/mmc/core/mmc_ops.h
@@ -40,8 +40,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 		bool use_busy_signal, bool send_status,	bool retry_crc_err);
 int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 		unsigned int timeout_ms);
-int mmc_stop_bkops(struct mmc_card *card);
-void mmc_start_bkops(struct mmc_card *card, bool from_exception);
+void mmc_run_bkops(struct mmc_card *card);
 int mmc_flush_cache(struct mmc_card *card);
 int mmc_cmdq_enable(struct mmc_card *card);
 int mmc_cmdq_disable(struct mmc_card *card);
diff --git a/drivers/mmc/core/mmc_test.c b/drivers/mmc/core/mmc_test.c
index ef18daeaa4cc..eabb1cab1765 100644
--- a/drivers/mmc/core/mmc_test.c
+++ b/drivers/mmc/core/mmc_test.c
@@ -3145,17 +3145,7 @@ static int mtf_testlist_show(struct seq_file *sf, void *data)
 	return 0;
 }
 
-static int mtf_testlist_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, mtf_testlist_show, inode->i_private);
-}
-
-static const struct file_operations mmc_test_fops_testlist = {
-	.open		= mtf_testlist_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(mtf_testlist);
 
 static void mmc_test_free_dbgfs_file(struct mmc_card *card)
 {
@@ -3216,7 +3206,7 @@ static int mmc_test_register_dbgfs_file(struct mmc_card *card)
 		goto err;
 
 	ret = __mmc_test_register_dbgfs_file(card, "testlist", S_IRUGO,
-		&mmc_test_fops_testlist);
+		&mtf_testlist_fops);
 	if (ret)
 		goto err;
 
diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c
index 86803a3a04dc..319ccd93383d 100644
--- a/drivers/mmc/core/slot-gpio.c
+++ b/drivers/mmc/core/slot-gpio.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/err.h>
-#include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
@@ -27,8 +26,8 @@ struct mmc_gpio {
 	bool override_cd_active_level;
 	irqreturn_t (*cd_gpio_isr)(int irq, void *dev_id);
 	char *ro_label;
+	char *cd_label;
 	u32 cd_debounce_delay_ms;
-	char cd_label[];
 };
 
 static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id)
@@ -45,15 +44,19 @@ static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id)
 
 int mmc_gpio_alloc(struct mmc_host *host)
 {
-	size_t len = strlen(dev_name(host->parent)) + 4;
 	struct mmc_gpio *ctx = devm_kzalloc(host->parent,
-				sizeof(*ctx) + 2 * len,	GFP_KERNEL);
+					    sizeof(*ctx), GFP_KERNEL);
 
 	if (ctx) {
-		ctx->ro_label = ctx->cd_label + len;
 		ctx->cd_debounce_delay_ms = 200;
-		snprintf(ctx->cd_label, len, "%s cd", dev_name(host->parent));
-		snprintf(ctx->ro_label, len, "%s ro", dev_name(host->parent));
+		ctx->cd_label = devm_kasprintf(host->parent, GFP_KERNEL,
+				"%s cd", dev_name(host->parent));
+		if (!ctx->cd_label)
+			return -ENOMEM;
+		ctx->ro_label = devm_kasprintf(host->parent, GFP_KERNEL,
+				"%s ro", dev_name(host->parent));
+		if (!ctx->ro_label)
+			return -ENOMEM;
 		host->slot.handler_priv = ctx;
 		host->slot.cd_irq = -EINVAL;
 	}
@@ -98,36 +101,6 @@ int mmc_gpio_get_cd(struct mmc_host *host)
 }
 EXPORT_SYMBOL(mmc_gpio_get_cd);
 
-/**
- * mmc_gpio_request_ro - request a gpio for write-protection
- * @host: mmc host
- * @gpio: gpio number requested
- *
- * As devm_* managed functions are used in mmc_gpio_request_ro(), client
- * drivers do not need to worry about freeing up memory.
- *
- * Returns zero on success, else an error.
- */
-int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio)
-{
-	struct mmc_gpio *ctx = host->slot.handler_priv;
-	int ret;
-
-	if (!gpio_is_valid(gpio))
-		return -EINVAL;
-
-	ret = devm_gpio_request_one(host->parent, gpio, GPIOF_DIR_IN,
-				    ctx->ro_label);
-	if (ret < 0)
-		return ret;
-
-	ctx->override_ro_active_level = true;
-	ctx->ro_gpio = gpio_to_desc(gpio);
-
-	return 0;
-}
-EXPORT_SYMBOL(mmc_gpio_request_ro);
-
 void mmc_gpiod_request_cd_irq(struct mmc_host *host)
 {
 	struct mmc_gpio *ctx = host->slot.handler_priv;
@@ -197,50 +170,6 @@ void mmc_gpio_set_cd_isr(struct mmc_host *host,
 EXPORT_SYMBOL(mmc_gpio_set_cd_isr);
 
 /**
- * mmc_gpio_request_cd - request a gpio for card-detection
- * @host: mmc host
- * @gpio: gpio number requested
- * @debounce: debounce time in microseconds
- *
- * As devm_* managed functions are used in mmc_gpio_request_cd(), client
- * drivers do not need to worry about freeing up memory.
- *
- * If GPIO debouncing is desired, set the debounce parameter to a non-zero
- * value. The caller is responsible for ensuring that the GPIO driver associated
- * with the GPIO supports debouncing, otherwise an error will be returned.
- *
- * Returns zero on success, else an error.
- */
-int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio,
-			unsigned int debounce)
-{
-	struct mmc_gpio *ctx = host->slot.handler_priv;
-	int ret;
-
-	ret = devm_gpio_request_one(host->parent, gpio, GPIOF_DIR_IN,
-				    ctx->cd_label);
-	if (ret < 0)
-		/*
-		 * don't bother freeing memory. It might still get used by other
-		 * slot functions, in any case it will be freed, when the device
-		 * is destroyed.
-		 */
-		return ret;
-
-	if (debounce) {
-		ret = gpio_set_debounce(gpio, debounce);
-		if (ret < 0)
-			return ret;
-	}
-
-	ctx->override_cd_active_level = true;
-	ctx->cd_gpio = gpio_to_desc(gpio);
-
-	return 0;
-}
-EXPORT_SYMBOL(mmc_gpio_request_cd);
-
-/**
  * mmc_gpiod_request_cd - request a gpio descriptor for card-detection
  * @host: mmc host
  * @con_id: function within the GPIO consumer
@@ -250,8 +179,7 @@ EXPORT_SYMBOL(mmc_gpio_request_cd);
  * @gpio_invert: will return whether the GPIO line is inverted or not, set
  * to NULL to ignore
  *
- * Use this function in place of mmc_gpio_request_cd() to use the GPIO
- * descriptor API.  Note that it must be called prior to mmc_add_host()
+ * Note that this must be called prior to mmc_add_host()
  * otherwise the caller must also call mmc_gpiod_request_cd_irq().
  *
  * Returns zero on success, else an error.
@@ -302,9 +230,6 @@ EXPORT_SYMBOL(mmc_can_gpio_cd);
  * @gpio_invert: will return whether the GPIO line is inverted or not,
  * set to NULL to ignore
  *
- * Use this function in place of mmc_gpio_request_ro() to use the GPIO
- * descriptor API.
- *
  * Returns zero on success, else an error.
  */
 int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 1b58739d9744..e26b8145efb3 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -441,6 +441,13 @@ config MMC_WBSD
 
 	  If unsure, say N.
 
+config MMC_ALCOR
+	tristate "Alcor Micro/Alcor Link SD/MMC controller"
+	depends on MISC_ALCOR_PCI
+	help
+	  Say Y here to include driver code to support SD/MMC card interface
+	  of Alcor Micro PCI-E card reader
+
 config MMC_AU1X
 	tristate "Alchemy AU1XX0 MMC Card Interface support"
 	depends on MIPS_ALCHEMY
@@ -646,13 +653,14 @@ config MMC_SDHI_SYS_DMAC
 
 config MMC_SDHI_INTERNAL_DMAC
 	tristate "DMA for SDHI SD/SDIO controllers using on-chip bus mastering"
-	depends on ARM64 || ARCH_R8A77470 || COMPILE_TEST
+	depends on ARM64 || ARCH_R7S9210 || ARCH_R8A77470 || COMPILE_TEST
 	depends on MMC_SDHI
-	default MMC_SDHI if (ARM64 || ARCH_R8A77470)
+	default MMC_SDHI if (ARM64 || ARCH_R7S9210 || ARCH_R8A77470)
 	help
 	  This provides DMA support for SDHI SD/SDIO controllers
 	  using on-chip bus mastering. This supports the controllers
-	  found in arm64 based SoCs.
+	  found in arm64 based SoCs. This controller is also found in
+	  some RZ family SoCs.
 
 config MMC_UNIPHIER
 	tristate "UniPhier SD/eMMC Host Controller support"
@@ -969,6 +977,8 @@ config MMC_SDHCI_XENON
 config MMC_SDHCI_OMAP
 	tristate "TI SDHCI Controller Support"
 	depends on MMC_SDHCI_PLTFM && OF
+	select THERMAL
+	select TI_SOC_THERMAL
 	help
 	  This selects the Secure Digital Host Controller Interface (SDHCI)
 	  support present in TI's DRA7 SOCs. The controller supports
@@ -977,3 +987,15 @@ config MMC_SDHCI_OMAP
 	  If you have a controller with this interface, say Y or M here.
 
 	  If unsure, say N.
+
+config MMC_SDHCI_AM654
+	tristate "Support for the SDHCI Controller in TI's AM654 SOCs"
+	depends on MMC_SDHCI_PLTFM && OF
+	help
+	  This selects the Secure Digital Host Controller Interface (SDHCI)
+	  support present in TI's AM654 SOCs. The controller supports
+	  SD/MMC/SDIO devices.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 720d37777098..73578718f119 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -22,8 +22,10 @@ obj-$(CONFIG_MMC_SDHCI_S3C)	+= sdhci-s3c.o
 obj-$(CONFIG_MMC_SDHCI_SIRF)   	+= sdhci-sirf.o
 obj-$(CONFIG_MMC_SDHCI_F_SDH30)	+= sdhci_f_sdh30.o
 obj-$(CONFIG_MMC_SDHCI_SPEAR)	+= sdhci-spear.o
+obj-$(CONFIG_MMC_SDHCI_AM654)	+= sdhci_am654.o
 obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
 obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
+obj-$(CONFIG_MMC_ALCOR)	+= alcor.o
 obj-$(CONFIG_MMC_MTK)		+= mtk-sd.o
 obj-$(CONFIG_MMC_OMAP)		+= omap.o
 obj-$(CONFIG_MMC_OMAP_HS)	+= omap_hsmmc.o
diff --git a/drivers/mmc/host/alcor.c b/drivers/mmc/host/alcor.c
new file mode 100644
index 000000000000..c712b7deb3a9
--- /dev/null
+++ b/drivers/mmc/host/alcor.c
@@ -0,0 +1,1162 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Driver for Alcor Micro AU6601 and AU6621 controllers
+ */
+
+/* Note: this driver was created without any documentation. Based
+ * on sniffing, testing and in some cases mimic of original driver.
+ * As soon as some one with documentation or more experience in SD/MMC, or
+ * reverse engineering then me, please review this driver and question every
+ * thing what I did. 2018 Oleksij Rempel <linux@rempel-privat.de>
+ */
+
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+
+#include <linux/alcor_pci.h>
+
+enum alcor_cookie {
+	COOKIE_UNMAPPED,
+	COOKIE_PRE_MAPPED,
+	COOKIE_MAPPED,
+};
+
+struct alcor_pll_conf {
+	unsigned int clk_src_freq;
+	unsigned int clk_src_reg;
+	unsigned int min_div;
+	unsigned int max_div;
+};
+
+struct alcor_sdmmc_host {
+	struct  device *dev;
+	struct alcor_pci_priv *alcor_pci;
+
+	struct mmc_host *mmc;
+	struct mmc_request *mrq;
+	struct mmc_command *cmd;
+	struct mmc_data *data;
+	unsigned int dma_on:1;
+	unsigned int early_data:1;
+
+	struct mutex cmd_mutex;
+
+	struct delayed_work timeout_work;
+
+	struct sg_mapping_iter sg_miter;	/* SG state for PIO */
+	struct scatterlist *sg;
+	unsigned int blocks;		/* remaining PIO blocks */
+	int sg_count;
+
+	u32			irq_status_sd;
+	unsigned char		cur_power_mode;
+};
+
+static const struct alcor_pll_conf alcor_pll_cfg[] = {
+	/* MHZ,		CLK src,		max div, min div */
+	{ 31250000,	AU6601_CLK_31_25_MHZ,	1,	511},
+	{ 48000000,	AU6601_CLK_48_MHZ,	1,	511},
+	{125000000,	AU6601_CLK_125_MHZ,	1,	511},
+	{384000000,	AU6601_CLK_384_MHZ,	1,	511},
+};
+
+static inline void alcor_rmw8(struct alcor_sdmmc_host *host, unsigned int addr,
+			       u8 clear, u8 set)
+{
+	struct alcor_pci_priv *priv = host->alcor_pci;
+	u32 var;
+
+	var = alcor_read8(priv, addr);
+	var &= ~clear;
+	var |= set;
+	alcor_write8(priv, var, addr);
+}
+
+/* As soon as irqs are masked, some status updates may be missed.
+ * Use this with care.
+ */
+static inline void alcor_mask_sd_irqs(struct alcor_sdmmc_host *host)
+{
+	struct alcor_pci_priv *priv = host->alcor_pci;
+
+	alcor_write32(priv, 0, AU6601_REG_INT_ENABLE);
+}
+
+static inline void alcor_unmask_sd_irqs(struct alcor_sdmmc_host *host)
+{
+	struct alcor_pci_priv *priv = host->alcor_pc