diff options
author | Ulf Hansson <ulf.hansson@stericsson.com> | 2011-12-13 16:57:07 +0100 |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2012-01-20 00:00:56 +0000 |
commit | 4d1a3a0dc551cfa7304ca46e014231500f3b81a6 (patch) | |
tree | 6ff7bfe536c5335b4821a2100d898861284ae8b2 /drivers/mmc/host | |
parent | 7d72a1d48af95211677ea83157945a8ef76b0751 (diff) |
ARM: 7218/1: mmc: mmci: Provide option to configure bus signal direction
The ST Micro variant supports bus signal direction indication. A new
member in the variant struct is added for this.
Moreover the actual signal direction configuration is board specific,
thus the amba mmci platform data is extended with a new member to be
able provide mmci with these specific board configurations.
This patch is based upon a patch from Sebastian Rasmussen.
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com>
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'drivers/mmc/host')
-rw-r--r-- | drivers/mmc/host/mmci.c | 21 | ||||
-rw-r--r-- | drivers/mmc/host/mmci.h | 10 |
2 files changed, 21 insertions, 10 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 7cc89beee87f..eb11ce61941d 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -54,6 +54,7 @@ static unsigned int fmax = 515633; * @st_clkdiv: true if using a ST-specific clock divider algorithm * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register * @pwrreg_powerup: power up value for MMCIPOWER register + * @signal_direction: input/out direction of bus signals can be indicated */ struct variant_data { unsigned int clkreg; @@ -65,6 +66,7 @@ struct variant_data { bool st_clkdiv; bool blksz_datactrl16; u32 pwrreg_powerup; + bool signal_direction; }; static struct variant_data variant_arm = { @@ -88,6 +90,7 @@ static struct variant_data variant_u300 = { .datalength_bits = 16, .sdio = true, .pwrreg_powerup = MCI_PWR_ON, + .signal_direction = true, }; static struct variant_data variant_ux500 = { @@ -99,6 +102,7 @@ static struct variant_data variant_ux500 = { .sdio = true, .st_clkdiv = true, .pwrreg_powerup = MCI_PWR_ON, + .signal_direction = true, }; static struct variant_data variant_ux500v2 = { @@ -111,6 +115,7 @@ static struct variant_data variant_ux500v2 = { .st_clkdiv = true, .blksz_datactrl16 = true, .pwrreg_powerup = MCI_PWR_ON, + .signal_direction = true, }; /* @@ -1057,6 +1062,22 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) break; } + if (variant->signal_direction && ios->power_mode != MMC_POWER_OFF) { + /* + * The ST Micro variant has some additional bits + * indicating signal direction for the signals in + * the SD/MMC bus and feedback-clock usage. + */ + pwr |= host->plat->sigdir; + + if (ios->bus_width == MMC_BUS_WIDTH_4) + pwr &= ~MCI_ST_DATA74DIREN; + else if (ios->bus_width == MMC_BUS_WIDTH_1) + pwr &= (~MCI_ST_DATA74DIREN & + ~MCI_ST_DATA31DIREN & + ~MCI_ST_DATA2DIREN); + } + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) { if (host->hw_designer != AMBA_VENDOR_ST) pwr |= MCI_ROD; diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 49f153e6ef7a..89eb2e3556d3 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -13,16 +13,6 @@ #define MCI_PWR_ON 0x03 #define MCI_OD (1 << 6) #define MCI_ROD (1 << 7) -/* - * The ST Micro version does not have ROD and reuse the voltage registers - * for direction settings - */ -#define MCI_ST_DATA2DIREN (1 << 2) -#define MCI_ST_CMDDIREN (1 << 3) -#define MCI_ST_DATA0DIREN (1 << 4) -#define MCI_ST_DATA31DIREN (1 << 5) -#define MCI_ST_FBCLKEN (1 << 7) -#define MCI_ST_DATA74DIREN (1 << 8) #define MMCICLOCK 0x004 #define MCI_CLK_ENABLE (1 << 8) |