Merge tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Framework:
   - Document (kerneldoc) core mfd_add_devices() API

  New Drivers:
   - Altera SOCFPGA System Manager
   - Maxim MAX77650/77651 PMIC
   - Maxim MAX77663 PMIC
   - ST Multi-Function eXpander (STMFX)

  New Device Support:
   - LEDs support in Intel Cherry Trail Whiskey Cove PMIC
   - RTC support in SAMSUNG Electronics S2MPA01 PMIC
   - SAM9X60 support in Atmel HLCDC (High-end LCD Controller)
   - USB X-Powers AXP 8xx PMICs
   - Integrated Sensor Hub (ISH) in ChromeOS EC
   - USB PD Logger in ChromeOS EC
   - AXP223 in X-Powers AXP series PMICs
   - Power Supply in X-Powers AXP 803 PMICs
   - Comet Lake in Intel Low Power Subsystem
   - Fingerprint MCU in ChromeOS EC
   - Touchpad MCU in ChromeOS EC
   - Move TI LM3532 support to LED

  New Functionality:
   - max77650, max77620: Add/extend DT support
   - max77620 power-off
   - syscon clocking
   - croc_ec host sleep event

  Fix-ups:
   - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
   - Remove unused functionality; rk808, da9063-*
   - SPDX conversion; da9063-*, atmel-*,
   - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
   - Fix-up DT bindings; ti-lmu, cirrus,lochnagar
   - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb

  Bug Fixes:
   - Fix incorrect defined values; max77620, da9063
   - Fix device initialisation; twl6040
   - Reset device on init; intel-lpss
   - Fix build warnings when !OF; sun6i-prcm
   - Register OF match tables; tps65912-spi
   - Fix DMI matching; intel_quark_i2c_gpio"

* tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
  mfd: Use dev_get_drvdata() directly
  mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device
  mfd: cros_ec: Instantiate properly CrOS FP MCU device
  mfd: cros_ec: Update the EC feature codes
  mfd: intel-lpss: Add Intel Comet Lake PCI IDs
  mfd: lochnagar: Add links to binding docs for sound and hwmon
  mfd: ab8500-debugfs: Fix a typo ("deubgfs")
  mfd: imx6sx: Add MQS register definition for iomuxc gpr
  dt-bindings: mfd: LMU: Fix lm3632 dt binding example
  mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching
  mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L
  mfd: tps65912-spi: Add missing of table registration
  mfd: axp20x: Add USB power supply mfd cell to AXP803
  mfd: sun6i-prcm: Fix build warning for non-OF configurations
  mfd: intel-lpss: Set the device in reset state when init
  platform/chrome: Add support for v1 of host sleep event
  mfd: cros_ec: Add host_sleep_event_v1 command
  mfd: cros_ec: Instantiate the CrOS USB PD logger driver
  mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable
  mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable
  ...

33 files changed, 1350 insertions, 176 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 26ad6468d13a..294d9567cc71 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -16,7 +16,7 @@ config MFD_CS5535
 	depends on PCI && (X86_32 || (X86 && COMPILE_TEST))
 	---help---
 	  This is the core driver for CS5535/CS5536 MFD functions.  This is
-          necessary for using the board's GPIO and MFGPT functionality.
+	  necessary for using the board's GPIO and MFGPT functionality.
 
 config MFD_ALTERA_A10SR
 	bool "Altera Arria10 DevKit System Resource chip"
@@ -29,6 +29,16 @@ config MFD_ALTERA_A10SR
 	  accessing the external gpio extender (LEDs & buttons) and
 	  power supply alarms (hwmon).
 
+config MFD_ALTERA_SYSMGR
+	bool "Altera SOCFPGA System Manager"
+	depends on (ARCH_SOCFPGA || ARCH_STRATIX10) && OF
+	select MFD_SYSCON
+	help
+	  Select this to get System Manager support for all Altera branded
+	  SOCFPGAs. The SOCFPGA System Manager handles all SOCFPGAs by
+	  using regmap_mmio accesses for ARM32 parts and SMC calls to
+	  EL3 for ARM64 parts.
+
 config MFD_ACT8945A
 	tristate "Active-semi ACT8945A"
 	select MFD_CORE
@@ -213,13 +223,13 @@ config MFD_CROS_EC
 	  protocol for talking to the EC is defined by the bus driver.
 
 config MFD_CROS_EC_CHARDEV
-        tristate "Chrome OS Embedded Controller userspace device interface"
-        depends on MFD_CROS_EC
-        ---help---
-          This driver adds support to talk with the ChromeOS EC from userspace.
+	tristate "Chrome OS Embedded Controller userspace device interface"
+	depends on MFD_CROS_EC
+	---help---
+	  This driver adds support to talk with the ChromeOS EC from userspace.
 
-          If you have a supported Chromebook, choose Y or M here.
-          The module will be called cros_ec_dev.
+	  If you have a supported Chromebook, choose Y or M here.
+	  The module will be called cros_ec_dev.
 
 config MFD_MADERA
 	tristate "Cirrus Logic Madera codecs"
@@ -733,6 +743,20 @@ config MFD_MAX77620
 	  provides common support for accessing the device; additional drivers
 	  must be enabled in order to use the functionality of the device.
 
+config MFD_MAX77650
+	tristate "Maxim MAX77650/77651 PMIC Support"
+	depends on I2C
+	depends on OF || COMPILE_TEST
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Say Y here to add support for Maxim Semiconductor MAX77650 and
+	  MAX77651 Power Management ICs. This is the core multifunction
+	  driver for interacting with the device. The module name is
+	  'max77650'. Additional drivers can be enabled in order to use
+	  the following functionalities of the device: GPIO, regulator,
+	  charger, LED, onkey.
+
 config MFD_MAX77686
 	tristate "Maxim Semiconductor MAX77686/802 PMIC Support"
 	depends on I2C
@@ -867,7 +891,7 @@ config MFD_CPCAP
 	  At least Motorola Droid 4 is known to use CPCAP.
 
 config MFD_VIPERBOARD
-        tristate "Nano River Technologies Viperboard"
+	tristate "Nano River Technologies Viperboard"
 	select MFD_CORE
 	depends on USB
 	default n
@@ -903,15 +927,15 @@ config PCF50633_ADC
 	tristate "NXP PCF50633 ADC"
 	depends on MFD_PCF50633
 	help
-	 Say yes here if you want to include support for ADC in the
-	 NXP PCF50633 chip.
+	  Say yes here if you want to include support for ADC in the
+	  NXP PCF50633 chip.
 
 config PCF50633_GPIO
 	tristate "NXP PCF50633 GPIO"
 	depends on MFD_PCF50633
 	help
-	 Say yes here if you want to include support GPIO for pins on
-	 the PCF50633 chip.
+	  Say yes here if you want to include support GPIO for pins on
+	  the PCF50633 chip.
 
 config UCB1400_CORE
 	tristate "Philips UCB1400 Core driver"
@@ -1026,7 +1050,7 @@ config MFD_RN5T618
 	select REGMAP_I2C
 	help
 	  Say yes here to add support for the Ricoh RN5T567,
-          RN5T618, RC5T619 PMIC.
+	  RN5T618, RC5T619 PMIC.
 	  This driver provides common support for accessing the device,
 	  additional drivers must be enabled in order to use the
 	  functionality of the device.
@@ -1079,9 +1103,9 @@ config MFD_SM501_GPIO
 	bool "Export GPIO via GPIO layer"
 	depends on MFD_SM501 && GPIOLIB
 	 ---help---
-	 This option uses the gpio library layer to export the 64 GPIO
-	 lines on the SM501. The platform data is used to supply the
-	 base number for the first GPIO line to register.
+	  This option uses the gpio library layer to export the 64 GPIO
+	  lines on the SM501. The platform data is used to supply the
+	  base number for the first GPIO line to register.
 
 config MFD_SKY81452
 	tristate "Skyworks Solutions SKY81452"
@@ -1096,16 +1120,16 @@ config MFD_SKY81452
 	  will be called sky81452.
 
 config MFD_SMSC
-       bool "SMSC ECE1099 series chips"
-       depends on I2C=y
-       select MFD_CORE
-       select REGMAP_I2C
-       help
-        If you say yes here you get support for the
-        ece1099 chips from SMSC.
+	bool "SMSC ECE1099 series chips"
+	depends on I2C=y
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the
+	  ece1099 chips from SMSC.
 
-        To compile this driver as a module, choose M here: the
-        module will be called smsc.
+	  To compile this driver as a module, choose M here: the
+	  module will be called smsc.
 
 config MFD_SC27XX_PMIC
 	tristate "Spreadtrum SC27xx PMICs"
@@ -1171,12 +1195,12 @@ config AB8500_CORE
 	  This chip embeds various other multimedia funtionalities as well.
 
 config AB8500_DEBUG
-       bool "Enable debug info via debugfs"
-       depends on AB8500_GPADC && DEBUG_FS
-       default y if DEBUG_FS
-       help
-         Select this option if you want debug information using the debug
-         filesystem, debugfs.
+	bool "Enable debug info via debugfs"
+	depends on AB8500_GPADC && DEBUG_FS
+	default y if DEBUG_FS
+	help
+	  Select this option if you want debug information using the debug
+	  filesystem, debugfs.
 
 config AB8500_GPADC
 	bool "ST-Ericsson AB8500 GPADC driver"
@@ -1907,6 +1931,19 @@ config MFD_STPMIC1
 	  To compile this driver as a module, choose M here: the
 	  module will be called stpmic1.
 
+config MFD_STMFX
+	tristate "Support for STMicroelectronics Multi-Function eXpander (STMFX)"
+	depends on I2C
+	depends on OF || COMPILE_TEST
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Support for the STMicroelectronics Multi-Function eXpander.
+
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.
+
 menu "Multimedia Capabilities Port drivers"
 	depends on ARCH_SA1100
 
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b4569ed7f3f3..52b1a90ff515 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -155,6 +155,7 @@ obj-$(CONFIG_MFD_DA9150)	+= da9150-core.o
 
 obj-$(CONFIG_MFD_MAX14577)	+= max14577.o
 obj-$(CONFIG_MFD_MAX77620)	+= max77620.o
+obj-$(CONFIG_MFD_MAX77650)	+= max77650.o
 obj-$(CONFIG_MFD_MAX77686)	+= max77686.o
 obj-$(CONFIG_MFD_MAX77693)	+= max77693.o
 obj-$(CONFIG_MFD_MAX77843)	+= max77843.o
@@ -237,6 +238,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI)	+= intel_soc_pmic_chtdc_ti.o
 obj-$(CONFIG_MFD_MT6397)	+= mt6397-core.o
 
 obj-$(CONFIG_MFD_ALTERA_A10SR)	+= altera-a10sr.o
+obj-$(CONFIG_MFD_ALTERA_SYSMGR) += altera-sysmgr.o
 obj-$(CONFIG_MFD_STPMIC1)	+= stpmic1.o
 obj-$(CONFIG_MFD_SUN4I_GPADC)	+= sun4i-gpadc.o
 
@@ -246,4 +248,4 @@ obj-$(CONFIG_MFD_MXS_LRADC)     += mxs-lradc.o
 obj-$(CONFIG_MFD_SC27XX_PMIC)	+= sprd-sc27xx-spi.o
 obj-$(CONFIG_RAVE_SP_CORE)	+= rave-sp.o
 obj-$(CONFIG_MFD_ROHM_BD718XX)	+= rohm-bd718x7.o
-
+obj-$(CONFIG_MFD_STMFX) 	+= stmfx.o
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index 8d652b2f9d14..f70d3f6a959b 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -2587,7 +2587,7 @@ static ssize_t ab8500_unsubscribe_write(struct file *file,
 }
 
 /*
- * - several deubgfs nodes fops
+ * - several debugfs nodes fops
  */
 
 static const struct file_operations ab8500_bank_fops = {
diff --git a/drivers/mfd/altera-sysmgr.c b/drivers/mfd/altera-sysmgr.c
new file mode 100644
index 000000000000..8976f82785bb
--- /dev/null
+++ b/drivers/mfd/altera-sysmgr.c
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2018-2019, Intel Corporation.
+ *  Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *  Copyright (C) 2012 Linaro Ltd.
+ *
+ *  Based on syscon driver.
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mfd/altera-sysmgr.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/**
+ * struct altr_sysmgr - Altera SOCFPGA System Manager
+ * @regmap: the regmap used for System Manager accesses.
+ * @base  : the base address for the System Manager
+ */
+struct altr_sysmgr {
+	struct regmap   *regmap;
+	resource_size_t *base;
+};
+
+static struct platform_driver altr_sysmgr_driver;
+
+/**
+ * s10_protected_reg_write
+ * Write to a protected SMC register.
+ * @base: Base address of System Manager
+ * @reg:  Address offset of register
+ * @val:  Value to write
+ * Return: INTEL_SIP_SMC_STATUS_OK (0) on success
+ *	   INTEL_SIP_SMC_REG_ERROR on error
+ *	   INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION if not supported
+ */
+static int s10_protected_reg_write(void *base,
+				   unsigned int reg, unsigned int val)
+{
+	struct arm_smccc_res result;
+	unsigned long sysmgr_base = (unsigned long)base;
+
+	arm_smccc_smc(INTEL_SIP_SMC_REG_WRITE, sysmgr_base + reg,
+		      val, 0, 0, 0, 0, 0, &result);
+
+	return (int)result.a0;
+}
+
+/**
+ * s10_protected_reg_read
+ * Read the status of a protected SMC register
+ * @base: Base address of System Manager.
+ * @reg:  Address of register
+ * @val:  Value read.
+ * Return: INTEL_SIP_SMC_STATUS_OK (0) on success
+ *	   INTEL_SIP_SMC_REG_ERROR on error
+ *	   INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION if not supported
+ */
+static int s10_protected_reg_read(void *base,
+				  unsigned int reg, unsigned int *val)
+{
+	struct arm_smccc_res result;
+	unsigned long sysmgr_base = (unsigned long)base;
+
+	arm_smccc_smc(INTEL_SIP_SMC_REG_READ, sysmgr_base + reg,
+		      0, 0, 0, 0, 0, 0, &result);
+
+	*val = (unsigned int)result.a1;
+
+	return (int)result.a0;
+}
+
+static struct regmap_config altr_sysmgr_regmap_cfg = {
+	.name = "altr_sysmgr",
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.fast_io = true,
+	.use_single_read = true,
+	.use_single_write = true,
+};
+
+/**
+ * sysmgr_match_phandle
+ * Matching function used by driver_find_device().
+ * Return: True if match is found, otherwise false.
+ */
+static int sysmgr_match_phandle(struct device *dev, void *data)
+{
+	return dev->of_node == (struct device_node *)data;
+}
+
+/**
+ * altr_sysmgr_regmap_lookup_by_phandle
+ * Find the sysmgr previous configured in probe() and return regmap property.
+ * Return: regmap if found or error if not found.
+ */
+struct regmap *altr_sysmgr_regmap_lookup_by_phandle(struct device_node *np,
+						    const char *property)
+{
+	struct device *dev;
+	struct altr_sysmgr *sysmgr;
+	struct device_node *sysmgr_np;
+
+	if (property)
+		sysmgr_np = of_parse_phandle(np, property, 0);
+	else
+		sysmgr_np = np;
+
+	if (!sysmgr_np)
+		return ERR_PTR(-ENODEV);
+
+	dev = driver_find_device(&altr_sysmgr_driver.driver, NULL,
+				 (void *)sysmgr_np, sysmgr_match_phandle);
+	of_node_put(sysmgr_np);
+	if (!dev)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	sysmgr = dev_get_drvdata(dev);
+
+	return sysmgr->regmap;
+}
+EXPORT_SYMBOL_GPL(altr_sysmgr_regmap_lookup_by_phandle);
+
+static int sysmgr_probe(struct platform_device *pdev)
+{
+	struct altr_sysmgr *sysmgr;
+	struct regmap *regmap;
+	struct resource *res;
+	struct regmap_config sysmgr_config = altr_sysmgr_regmap_cfg;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+
+	sysmgr = devm_kzalloc(dev, sizeof(*sysmgr), GFP_KERNEL);
+	if (!sysmgr)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOENT;
+
+	sysmgr_config.max_register = resource_size(res) -
+				     sysmgr_config.reg_stride;
+	if (of_device_is_compatible(np, "altr,sys-mgr-s10")) {
+		/* Need physical address for SMCC call */
+		sysmgr->base = (resource_size_t *)res->start;
+		sysmgr_config.reg_read = s10_protected_reg_read;
+		sysmgr_config.reg_write = s10_protected_reg_write;
+
+		regmap = devm_regmap_init(dev, NULL, sysmgr->base,
+					  &sysmgr_config);
+	} else {
+		sysmgr->base = devm_ioremap(dev, res->start,
+					    resource_size(res));
+		if (!sysmgr->base)
+			return -ENOMEM;
+
+		sysmgr_config.max_register = res->end - res->start - 3;
+		regmap = devm_regmap_init_mmio(dev, sysmgr->base,
+					       &sysmgr_config);
+	}
+
+	if (IS_ERR(regmap)) {
+		pr_err("regmap init failed\n");
+		return PTR_ERR(regmap);
+	}
+
+	sysmgr->regmap = regmap;
+
+	platform_set_drvdata(pdev, sysmgr);
+
+	return 0;
+}
+
+static const struct of_device_id altr_sysmgr_of_match[] = {
+	{ .compatible = "altr,sys-mgr" },
+	{ .compatible = "altr,sys-mgr-s10" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altr_sysmgr_of_match);
+
+static struct platform_driver altr_sysmgr_driver = {
+	.probe =  sysmgr_probe,
+	.driver = {
+		.name = "altr,system_manager",
+		.of_match_table = altr_sysmgr_of_match,
+	},
+};
+
+static int __init altr_sysmgr_init(void)
+{
+	return platform_driver_register(&altr_sysmgr_driver);
+}
+core_initcall(altr_sysmgr_init);
+
+static void __exit altr_sysmgr_exit(void)
+{
+	platform_driver_unregister(&altr_sysmgr_driver);
+}
+module_exit(altr_sysmgr_exit);
+
+MODULE_AUTHOR("Thor Thayer <>");
+MODULE_DESCRIPTION("SOCFPGA System Manager driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/atmel-hlcdc.c b/drivers/mfd/atmel-hlcdc.c
index e82543bcfdc8..35a9e16f9902 100644
--- a/drivers/mfd/atmel-hlcdc.c
+++ b/drivers/mfd/atmel-hlcdc.c
@@ -141,6 +141,7 @@ static const struct of_device_id atmel_hlcdc_match[] = {
 	{ .compatible = "atmel,sama5d2-hlcdc" },
 	{ .compatible = "atmel,sama5d3-hlcdc" },
 	{ .compatible = "atmel,sama5d4-hlcdc" },
+	{ .compatible = "microchip,sam9x60-hlcdc" },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, atmel_hlcdc_match);
diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c
index a7b7c5423ea5..c2e8a0dee7f8 100644
--- a/drivers/mfd/axp20x-i2c.c
+++ b/drivers/mfd/axp20x-i2c.c
@@ -65,6 +65,7 @@ static const struct of_device_id axp20x_i2c_of_match[] = {
 	{ .compatible = "x-powers,axp202", .data = (void *)AXP202_ID },
 	{ .compatible = "x-powers,axp209", .data = (void *)AXP209_ID },
 	{ .compatible = "x-powers,axp221", .data = (void *)AXP221_ID },
+	{ .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
 	{ .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
 	{ },
 };
@@ -75,6 +76,7 @@ static const struct i2c_device_id axp20x_i2c_id[] = {
 	{ "axp202", 0 },
 	{ "axp209", 0 },
 	{ "axp221", 0 },
+	{ "axp223", 0 },
 	{ "axp806", 0 },
 	{ },
 };
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 3c97f2c0fdfe..2215660dfa05 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -198,6 +198,12 @@ static const struct resource axp22x_usb_power_supply_resources[] = {
 	DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
 };
 
+/* AXP803 and AXP813/AXP818 share the same interrupts */
+static const struct resource axp803_usb_power_supply_resources[] = {
+	DEFINE_RES_IRQ_NAMED(AXP803_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
+	DEFINE_RES_IRQ_NAMED(AXP803_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
+};
+
 static const struct resource axp22x_pek_resources[] = {
 	DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
 	DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
@@ -741,6 +747,11 @@ static const struct mfd_cell axp803_cells[] = {
 		.of_compatible	= "x-powers,axp813-ac-power-supply",
 		.num_resources	= ARRAY_SIZE(axp20x_ac_power_supply_resources),
 		.resources	= axp20x_ac_power_supply_resources,
+	}, {
+		.name		= "axp20x-usb-power-supply",
+		.num_resources	= ARRAY_SIZE(axp803_usb_power_supply_resources),
+		.resources	= axp803_usb_power_supply_resources,
+		.of_compatible	= "x-powers,axp813-usb-power-supply",
 	},
 	{	.name		= "axp20x-regulator" },
 };
@@ -793,6 +804,11 @@ static const struct mfd_cell axp813_cells[] = {
 		.of_compatible	= "x-powers,axp813-ac-power-supply",
 		.num_resources	= ARRAY_SIZE(axp20x_ac_power_supply_resources),
 		.resources	= axp20x_ac_power_supply_resources,
+	}, {
+		.name		= "axp20x-usb-power-supply",
+		.num_resources	= ARRAY_SIZE(axp803_usb_power_supply_resources),
+		.resources	= axp803_usb_power_supply_resources,
+		.of_compatible	= "x-powers,axp813-usb-power-supply",
 	},
 };
 
diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c
index 6acfe036d522..bd2bcdd4718b 100644
--- a/drivers/mfd/cros_ec.c
+++ b/drivers/mfd/cros_ec.c
@@ -75,20 +75,49 @@ static irqreturn_t ec_irq_thread(int irq, void *data)
 
 static int cros_ec_sleep_event(struct cros_ec_device *ec_dev, u8 sleep_event)
 {
+	int ret;
 	struct {
 		struct cros_ec_command msg;
-		struct ec_params_host_sleep_event req;
+		union {
+			struct ec_params_host_sleep_event req0;
+			struct ec_params_host_sleep_event_v1 req1;
+			struct ec_response_host_sleep_event_v1 resp1;
+		} u;
 	} __packed buf;
 
 	memset(&buf, 0, sizeof(buf));
 
-	buf.req.sleep_event = sleep_event;
+	if (ec_dev->host_sleep_v1) {
+		buf.u.req1.sleep_event = sleep_event;
+		buf.u.req1.suspend_params.sleep_timeout_ms =
+				EC_HOST_SLEEP_TIMEOUT_DEFAULT;
+
+		buf.msg.outsize = sizeof(buf.u.req1);
+		if ((sleep_event == HOST_SLEEP_EVENT_S3_RESUME) ||
+		    (sleep_event == HOST_SLEEP_EVENT_S0IX_RESUME))
+			buf.msg.insize = sizeof(buf.u.resp1);
+
+		buf.msg.version = 1;
+
+	} else {
+		buf.u.req0.sleep_event = sleep_event;
+		buf.msg.outsize = sizeof(buf.u.req0);
+	}
 
 	buf.msg.command = EC_CMD_HOST_SLEEP_EVENT;
-	buf.msg.version = 0;
-	buf.msg.outsize = sizeof(buf.req);
 
-	return cros_ec_cmd_xfer(ec_dev, &buf.msg);
+	ret = cros_ec_cmd_xfer(ec_dev, &buf.msg);
+
+	/* For now, report failure to transition to S0ix with a warning. */
+	if (ret >= 0 && ec_dev->host_sleep_v1 &&
+	    (sleep_event == HOST_SLEEP_EVENT_S0IX_RESUME))
+		WARN_ONCE(buf.u.resp1.resume_response.sleep_transitions &
+			  EC_HOST_RESUME_SLEEP_TIMEOUT,
+			  "EC detected sleep transition timeout. Total slp_s0 transitions: %d",
+			  buf.u.resp1.resume_response.sleep_transitions &
+			  EC_HOST_RESUME_SLEEP_TRANSITIONS_MASK);
+
+	return ret;
 }
 
 int cros_ec_register(struct cros_ec_device *ec_dev)
diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index d275deaecb12..54a58df571b6 100644
--- a/drivers/mfd/cros_ec_dev.c
+++ b/drivers/mfd/cros_ec_dev.c
@@ -385,7 +385,8 @@ static const struct mfd_cell cros_ec_rtc_cells[] = {
 };
 
 static const struct mfd_cell cros_usbpd_charger_cells[] = {
-	{ .name = "cros-usbpd-charger" }
+	{ .name = "cros-usbpd-charger" },
+	{ .name = "cros-usbpd-logger" },
 };
 
 static const struct mfd_cell cros_ec_platform_cells[] = {
@@ -418,6 +419,39 @@ static int ec_device_probe(struct platform_device *pdev)
 	device_initialize(&ec->class_dev);
 	cdev_init(&ec->cdev, &fops);
 
+	/* Check whether this is actually a Fingerprint MCU rather than an EC */
+	if (cros_ec_check_features(ec, EC_FEATURE_FINGERPRINT)) {
+		dev_info(dev, "CrOS Fingerprint MCU detected.\n");
+		/*
+		 * Help userspace differentiating ECs from FP MCU,
+		 * regardless of the probing order.
+		 */
+		ec_platform->ec_name = CROS_EC_DEV_FP_NAME;
+	}
+
+	/*
+	 * Check whether this is actually an Integrated Sensor Hub (ISH)
+	 * rather than an EC.
+	 */
+	if (cros_ec_check_features(ec, EC_FEATURE_ISH)) {
+		dev_info(dev, "CrOS ISH MCU detected.\n");
+		/*
+		 * Help userspace differentiating ECs from ISH MCU,
+		 * regardless of the probing order.
+		 */
+		ec_platform->ec_name = CROS_EC_DEV_ISH_NAME;
+	}
+
+	/* Check whether this is actually a Touchpad MCU rather than an EC */
+	if (cros_ec_check_features(ec, EC_FEATURE_TOUCHPAD)) {
+		dev_info(dev, "CrOS Touchpad MCU detected.\n");
+		/*
+		 * Help userspace differentiating ECs from TP MCU,
+		 * regardless of the probing order.
+		 */
+		ec_platform->ec_name = CROS_EC_DEV_TP_NAME;
+	}
+
 	/*
 	 * Add the class device
 	 * Link to the character device for creating the /dev entry
diff --git a/drivers/mfd/cs47l35-tables.c b/drivers/mfd/cs47l35-tables.c
index 604c9dd14df5..338b825127f1 100644
--- a/drivers/mfd/cs47l35-tables.c
+++ b/drivers/mfd/cs47l35-tables.c
@@ -178,6 +178,7 @@ static const struct reg_default cs47l35_reg_default[] = {
 	{ 0x00000448, 0x0a83 }, /* R1096 (0x448) - eDRE Enable */
 	{ 0x0000044a, 0x0000 }, /* R1098 (0x44a) - eDRE Manual */
 	{ 0x00000450, 0x0000 }, /* R1104 (0x450) - DAC AEC Control 1 */
+	{ 0x00000451, 0x0000 }, /* R1105 (0x451) - DAC AEC Control 2 */
 	{ 0x00000458, 0x0000 }, /* R1112 (0x458) - Noise Gate Control */
 	{ 0x00000490, 0x0069 }, /* R1168 (0x490) - PDM SPK1 CTRL 1 */
 	{ 0x00000491, 0x0000 }, /* R1169 (0x491) - PDM SPK1 CTRL 2 */
@@ -970,6 +971,7 @@ static bool cs47l35_16bit_readable_register(struct device *dev,
 	case MADERA_EDRE_ENABLE:
 	case MADERA_EDRE_MANUAL:
 	case MADERA_DAC_AEC_CONTROL_1:
+	case MADERA_DAC_AEC_CONTROL_2:
 	case MADERA_NOISE_GATE_CONTROL:
 	case MADERA_PDM_SPK1_CTRL_1:
 	case MADERA_PDM_SPK1_CTRL_2:
diff --git a/drivers/mfd/cs47l90-tables.c b/drivers/mfd/cs47l90-tables.c
index 77207d98f0cc..c040d3d7232a 100644
--- a/drivers/mfd/cs47l90-tables.c
+++ b/drivers/mfd/cs47l90-tables.c
@@ -263,6 +263,7 @@ static const struct reg_default cs47l90_reg_default[] = {
 	{ 0x00000440, 0x003f }, /* R1088 (0x440) - DRE Enable */
 	{ 0x00000448, 0x003f }, /* R1096 (0x448) - eDRE Enable */
 	{ 0x00000450, 0x0000 }, /* R1104 (0x450) - DAC AEC Control 1 */
+	{ 0x00000451, 0x0000 }, /* R1104 (0x450) - DAC AEC Control 2 */
 	{ 0x00000458, 0x0000 }, /* R1112 (0x458) - Noise Gate Control */
 	{ 0x00000490, 0x0069 }, /* R1168 (0x490) - PDM SPK1 CTRL 1 */
 	{ 0x00000491, 0x0000 }, /* R1169 (0x491) - PDM SPK1 CTRL 2 */
@@ -1692,6 +1693,7 @@ static bool cs47l90_16bit_readable_register(struct device *dev,
 	case MADERA_DRE_ENABLE:
 	case MADERA_EDRE_ENABLE:
 	case MADERA_DAC_AEC_CONTROL_1:
+	case MADERA_DAC_AEC_CONTROL_2:
 	case MADERA_NOISE_GATE_CONTROL:
 	case MADERA_PDM_SPK1_CTRL_1:
 	case MADERA_PDM_SPK1_CTRL_2:
diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c
index 6e4ce49b4405..b125f90dd375 100644
--- a/drivers/mfd/da9063-core.c
+++ b/drivers/mfd/da9063-core.c
@@ -1,5 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
- * da9063-core.c: Device access for Dialog DA9063 modules
+ * Device access for Dialog DA9063 modules
  *
  * Copyright 2012 Dialog Semiconductors Ltd.
  * Copyright 2013 Philipp Zabel, Pengutronix
@@ -7,11 +8,6 @@
  * Author: Krystian Garbaciak, Dialog Semiconductor
  * Author: Michal Hajduk, Dialog Semiconductor
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
  */
 
 #include <linux/kernel.h>
@@ -26,7 +22,6 @@
 #include <linux/regmap.h>
 
 #include <linux/mfd/da9063/core.h>
-#include <linux/mfd/da9063/pdata.h>
 #include <linux/mfd/da9063/registers.h>
 
 #include <linux/proc_fs.h>
@@ -165,7 +160,6 @@ static int da9063_clear_fault_log(struct da9063 *da9063)
 
 int da9063_device_init(struct da9063 *da9063, unsigned int irq)
 {
-	struct da9063_pdata *pdata = da9063->dev->platform_data;
 	int model, variant_id, variant_code;
 	int ret;
 
@@ -173,24 +167,10 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
 	if (ret < 0)
 		dev_err(da9063->dev, "Cannot clear fault log\n");
 
-	if (pdata) {
-		da9063->flags = pdata->flags;
-		da9063->irq_base = pdata->irq_base;
-	} else {
-		da9063->flags = 0;
-		da9063->irq_base = -1;
-	}
+	da9063->flags = 0;
+	da9063->irq_base = -1;
 	da9063->chip_irq = irq;
 
-	if (pdata && pdata->init != NULL) {
-		ret = pdata->init(da9063);
-		if (ret != 0) {
-			dev_err(da9063->dev,
-				"Platform initialization failed.\n");
-			return ret;
-		}
-	}
-
 	ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_ID, &model);
 	if (ret < 0) {
 		dev_err(da9063->dev, "Cannot read chip model id.\n");
diff --git a/drivers/mfd/da9063-i2c.c b/drivers/mfd/da9063-i2c.c
index 50a24b1921d0..455de74c0dd2 100644
--- a/drivers/mfd/da9063-i2c.c
+++ b/drivers/mfd/da9063-i2c.c
@@ -1,15 +1,10 @@
-/* da9063-i2c.c: Interrupt support for Dialog DA9063
+// SPDX-License-Identifier: GPL-2.0+
+/* I2C support for Dia