mfd: update DB8500 PRCMU driver

This updates the DB8500 PRCMU driver to the latest version
available internally. Nominally we would update the dependent
CPUfreq driver at the same time but since that is being moved
around in this patch set we postpone that by simply deactivating
it for the time being.

This is a snapshot of the current PRCMU firmware API as it looks
right now. The PRCMU firmware is still subject to change. This
also updates the CPUfreq driver to a newer version that will
utilize the new API.

Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
Signed-off-by: Martin Persson <martin.persson@stericsson.com>
Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Sebastien Rault <sebastien.rault@stericsson.com>
Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Rickard Andersson <rickard.andersson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

2 files changed, 1802 insertions, 235 deletions

diff --git a/drivers/mfd/db8500-prcmu-regs.h b/drivers/mfd/db8500-prcmu-regs.h
index c1226da19bfb..3bbf04d58043 100644
--- a/drivers/mfd/db8500-prcmu-regs.h
+++ b/drivers/mfd/db8500-prcmu-regs.h
@@ -9,86 +9,158 @@
  *
  * PRCM Unit registers
  */
+#ifndef __DB8500_PRCMU_REGS_H
+#define __DB8500_PRCMU_REGS_H
 
-#ifndef __MACH_PRCMU_REGS_H
-#define __MACH_PRCMU_REGS_H
-
+#include <linux/bitops.h>
 #include <mach/hardware.h>
 
-#define PRCM_ARM_PLLDIVPS	(_PRCMU_BASE + 0x118)
-#define PRCM_ARM_CHGCLKREQ	(_PRCMU_BASE + 0x114)
-#define PRCM_PLLARM_ENABLE	(_PRCMU_BASE + 0x98)
-#define PRCM_ARMCLKFIX_MGT	(_PRCMU_BASE + 0x0)
-#define PRCM_A9_RESETN_CLR	(_PRCMU_BASE + 0x1f4)
-#define PRCM_A9_RESETN_SET	(_PRCMU_BASE + 0x1f0)
-#define PRCM_ARM_LS_CLAMP	(_PRCMU_BASE + 0x30c)
-#define PRCM_SRAM_A9		(_PRCMU_BASE + 0x308)
+#define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
+
+#define PRCM_ARM_PLLDIVPS 0x118
+#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE	BITS(0, 5)
+#define PRCM_ARM_PLLDIVPS_MAX_MASK	0xF
+
+#define PRCM_PLLARM_LOCKP 0x0A8
+#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 BIT(1)
+
+#define PRCM_ARM_CHGCLKREQ 0x114
+#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ BIT(0)
+
+#define PRCM_PLLARM_ENABLE 0x98
+#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE	BIT(0)
+#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON	BIT(8)
+
+#define PRCM_ARMCLKFIX_MGT	0x0
+#define PRCM_A9_RESETN_CLR	0x1f4
+#define PRCM_A9_RESETN_SET	0x1f0
+#define PRCM_ARM_LS_CLAMP	0x30C
+#define PRCM_SRAM_A9		0x308
 
 /* ARM WFI Standby signal register */
-#define PRCM_ARM_WFI_STANDBY    (_PRCMU_BASE + 0x130)
-#define PRCMU_IOCR              (_PRCMU_BASE + 0x310)
+#define PRCM_ARM_WFI_STANDBY	0x130
+#define PRCM_IOCR		0x310
+#define PRCM_IOCR_IOFORCE BIT(0)
 
 /* CPU mailbox registers */
-#define PRCM_MBOX_CPU_VAL	(_PRCMU_BASE + 0x0fc)
-#define PRCM_MBOX_CPU_SET	(_PRCMU_BASE + 0x100)
-#define PRCM_MBOX_CPU_CLR	(_PRCMU_BASE + 0x104)
+#define PRCM_MBOX_CPU_VAL 0x0FC
+#define PRCM_MBOX_CPU_SET 0x100
 
 /* Dual A9 core interrupt management unit registers */
-#define PRCM_A9_MASK_REQ	(_PRCMU_BASE + 0x328)
-#define PRCM_A9_MASK_ACK	(_PRCMU_BASE + 0x32c)
-#define PRCM_ARMITMSK31TO0	(_PRCMU_BASE + 0x11c)
-#define PRCM_ARMITMSK63TO32	(_PRCMU_BASE + 0x120)
-#define PRCM_ARMITMSK95TO64	(_PRCMU_BASE + 0x124)
-#define PRCM_ARMITMSK127TO96	(_PRCMU_BASE + 0x128)
-#define PRCM_POWER_STATE_VAL	(_PRCMU_BASE + 0x25C)
-#define PRCM_ARMITVAL31TO0	(_PRCMU_BASE + 0x260)
-#define PRCM_ARMITVAL63TO32	(_PRCMU_BASE + 0x264)
-#define PRCM_ARMITVAL95TO64	(_PRCMU_BASE + 0x268)
-#define PRCM_ARMITVAL127TO96	(_PRCMU_BASE + 0x26C)
-
-#define PRCM_HOSTACCESS_REQ	(_PRCMU_BASE + 0x334)
-#define ARM_WAKEUP_MODEM	0x1
-
-#define PRCM_ARM_IT1_CLEAR	(_PRCMU_BASE + 0x48C)
-#define PRCM_ARM_IT1_VAL	(_PRCMU_BASE + 0x494)
-#define PRCM_HOLD_EVT		(_PRCMU_BASE + 0x174)
-
-#define PRCM_ITSTATUS0		(_PRCMU_BASE + 0x148)
-#define PRCM_ITSTATUS1		(_PRCMU_BASE + 0x150)
-#define PRCM_ITSTATUS2		(_PRCMU_BASE + 0x158)
-#define PRCM_ITSTATUS3		(_PRCMU_BASE + 0x160)
-#define PRCM_ITSTATUS4		(_PRCMU_BASE + 0x168)
-#define PRCM_ITSTATUS5		(_PRCMU_BASE + 0x484)
-#define PRCM_ITCLEAR5		(_PRCMU_BASE + 0x488)
-#define PRCM_ARMIT_MASKXP70_IT	(_PRCMU_BASE + 0x1018)
+#define PRCM_A9_MASK_REQ 0x328
+#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ BIT(0)
+
+#define PRCM_A9_MASK_ACK	0x32C
+#define PRCM_ARMITMSK31TO0	0x11C
+#define PRCM_ARMITMSK63TO32	0x120
+#define PRCM_ARMITMSK95TO64	0x124
+#define PRCM_ARMITMSK127TO96	0x128
+#define PRCM_POWER_STATE_VAL	0x25C
+#define PRCM_ARMITVAL31TO0	0x260
+#define PRCM_ARMITVAL63TO32	0x264
+#define PRCM_ARMITVAL95TO64	0x268
+#define PRCM_ARMITVAL127TO96	0x26C
+
+#define PRCM_HOSTACCESS_REQ 0x334
+#define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ BIT(0)
+
+#define PRCM_ARM_IT1_CLR 0x48C
+#define PRCM_ARM_IT1_VAL 0x494
+
+#define PRCM_ITSTATUS0		0x148
+#define PRCM_ITSTATUS1		0x150
+#define PRCM_ITSTATUS2		0x158
+#define PRCM_ITSTATUS3		0x160
+#define PRCM_ITSTATUS4		0x168
+#define PRCM_ITSTATUS5		0x484
+#define PRCM_ITCLEAR5		0x488
+#define PRCM_ARMIT_MASKXP70_IT	0x1018
 
 /* System reset register */
-#define PRCM_APE_SOFTRST	(_PRCMU_BASE + 0x228)
+#define PRCM_APE_SOFTRST 0x228
 
 /* Level shifter and clamp control registers */
-#define PRCM_MMIP_LS_CLAMP_SET     (_PRCMU_BASE + 0x420)
-#define PRCM_MMIP_LS_CLAMP_CLR     (_PRCMU_BASE + 0x424)
+#define PRCM_MMIP_LS_CLAMP_SET 0x420
+#define PRCM_MMIP_LS_CLAMP_CLR 0x424
+
+/* PRCMU HW semaphore */
+#define PRCM_SEM 0x400
+#define PRCM_SEM_PRCM_SEM BIT(0)
 
 /* PRCMU clock/PLL/reset registers */
-#define PRCM_PLLDSI_FREQ           (_PRCMU_BASE + 0x500)
-#define PRCM_PLLDSI_ENABLE         (_PRCMU_BASE + 0x504)
-#define PRCM_LCDCLK_MGT            (_PRCMU_BASE + 0x044)
-#define PRCM_MCDECLK_MGT           (_PRCMU_BASE + 0x064)
-#define PRCM_HDMICLK_MGT           (_PRCMU_BASE + 0x058)
-#define PRCM_TVCLK_MGT             (_PRCMU_BASE + 0x07c)
-#define PRCM_DSI_PLLOUT_SEL        (_PRCMU_BASE + 0x530)
-#define PRCM_DSITVCLK_DIV          (_PRCMU_BASE + 0x52C)
-#define PRCM_APE_RESETN_SET        (_PRCMU_BASE + 0x1E4)
-#define PRCM_APE_RESETN_CLR        (_PRCMU_BASE + 0x1E8)
+#define PRCM_PLLDSI_FREQ	0x500
+#define PRCM_PLLDSI_ENABLE	0x504
+#define PRCM_PLLDSI_LOCKP	0x508
+#define PRCM_DSI_PLLOUT_SEL	0x530
+#define PRCM_DSITVCLK_DIV	0x52C
+#define PRCM_APE_RESETN_SET	0x1E4
+#define PRCM_APE_RESETN_CLR	0x1E8
+
+#define PRCM_TCR		0x1C8
+#define PRCM_TCR_TENSEL_MASK	BITS(0, 7)
+#define PRCM_TCR_STOP_TIMERS	BIT(16)
+#define PRCM_TCR_DOZE_MODE	BIT(17)
+
+#define PRCM_CLKOCR			0x1CC
+#define PRCM_CLKOCR_CLKODIV0_SHIFT	0
+#define PRCM_CLKOCR_CLKODIV0_MASK	BITS(0, 5)
+#define PRCM_CLKOCR_CLKOSEL0_SHIFT	6
+#define PRCM_CLKOCR_CLKOSEL0_MASK	BITS(6, 8)
+#define PRCM_CLKOCR_CLKODIV1_SHIFT	16
+#define PRCM_CLKOCR_CLKODIV1_MASK	BITS(16, 21)
+#define PRCM_CLKOCR_CLKOSEL1_SHIFT	22
+#define PRCM_CLKOCR_CLKOSEL1_MASK	BITS(22, 24)
+#define PRCM_CLKOCR_CLK1TYPE		BIT(28)
+
+#define PRCM_SGACLK_MGT		0x014
+#define PRCM_UARTCLK_MGT	0x018
+#define PRCM_MSP02CLK_MGT	0x01C
+#define PRCM_MSP1CLK_MGT	0x288
+#define PRCM_I2CCLK_MGT		0x020
+#define PRCM_SDMMCCLK_MGT	0x024
+#define PRCM_SLIMCLK_MGT	0x028
+#define PRCM_PER1CLK_MGT	0x02C
+#define PRCM_PER2CLK_MGT	0x030
+#define PRCM_PER3CLK_MGT	0x034
+#define PRCM_PER5CLK_MGT	0x038
+#define PRCM_PER6CLK_MGT	0x03C
+#define PRCM_PER7CLK_MGT	0x040
+#define PRCM_LCDCLK_MGT		0x044
+#define PRCM_BMLCLK_MGT		0x04C
+#define PRCM_HSITXCLK_MGT	0x050
+#define PRCM_HSIRXCLK_MGT	0x054
+#define PRCM_HDMICLK_MGT	0x058
+#define PRCM_APEATCLK_MGT	0x05C
+#define PRCM_APETRACECLK_MGT	0x060
+#define PRCM_MCDECLK_MGT	0x064
+#define PRCM_IPI2CCLK_MGT	0x068
+#define PRCM_DSIALTCLK_MGT	0x06C
+#define PRCM_DMACLK_MGT		0x074
+#define PRCM_B2R2CLK_MGT	0x078
+#define PRCM_TVCLK_MGT		0x07C
+#define PRCM_UNIPROCLK_MGT	0x278
+#define PRCM_SSPCLK_MGT		0x280
+#define PRCM_RNGCLK_MGT		0x284
+#define PRCM_UICCCLK_MGT	0x27C
+
+#define PRCM_CLK_MGT_CLKPLLDIV_MASK	BITS(0, 4)
+#define PRCM_CLK_MGT_CLKPLLSW_MASK	BITS(5, 7)
+#define PRCM_CLK_MGT_CLKEN		BIT(8)
 
 /* ePOD and memory power signal control registers */
-#define PRCM_EPOD_C_SET            (_PRCMU_BASE + 0x410)
-#define PRCM_SRAM_LS_SLEEP         (_PRCMU_BASE + 0x304)
+#define PRCM_EPOD_C_SET		0x410
+#define PRCM_SRAM_LS_SLEEP	0x304
 
 /* Debug power control unit registers */
-#define PRCM_POWER_STATE_SET       (_PRCMU_BASE + 0x254)
+#define PRCM_POWER_STATE_SET 0x254
 
 /* Miscellaneous unit registers */
-#define PRCM_DSI_SW_RESET          (_PRCMU_BASE + 0x324)
+#define PRCM_DSI_SW_RESET 0x324
+#define PRCM_GPIOCR		0x138
+
+/* GPIOCR register */
+#define PRCM_GPIOCR_SPI2_SELECT BIT(23)
+
+#define PRCM_DDR_SUBSYS_APE_MINBW  0x438
 
-#endif /* __MACH_PRCMU_REGS_H */
+#endif /* __DB8500_PRCMU_REGS_H */
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 31f18c8c6bf8..c44725bd8b9a 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -10,94 +10,1355 @@
  * U8500 PRCM Unit interface driver
  *
  */
-#include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/spinlock.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/completion.h>
+#include <linux/irq.h>
 #include <linux/jiffies.h>
 #include <linux/bitops.h>
-#include <linux/interrupt.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/mfd/core.h>
 #include <linux/mfd/db8500-prcmu.h>
-
 #include <mach/hardware.h>
-
+#include <mach/irqs.h>
+#include <mach/db8500-regs.h>
+#include <mach/id.h>
 #include "db8500-prcmu-regs.h"
 
-/* Global var to runtime determine TCDM base for v2 or v1 */
-static __iomem void *tcdm_base;
+/* Offset for the firmware version within the TCPM */
+#define PRCMU_FW_VERSION_OFFSET 0xA4
 
-#define _MBOX_HEADER		(tcdm_base + 0xFE8)
-#define MBOX_HEADER_REQ_MB0	(_MBOX_HEADER + 0x0)
+/* PRCMU project numbers, defined by PRCMU FW */
+#define PRCMU_PROJECT_ID_8500V1_0 1
+#define PRCMU_PROJECT_ID_8500V2_0 2
+#define PRCMU_PROJECT_ID_8400V2_0 3
 
-#define REQ_MB1 (tcdm_base + 0xFD0)
-#define REQ_MB5 (tcdm_base + 0xE44)
+/* Index of different voltages to be used when accessing AVSData */
+#define PRCM_AVS_BASE		0x2FC
+#define PRCM_AVS_VBB_RET	(PRCM_AVS_BASE + 0x0)
+#define PRCM_AVS_VBB_MAX_OPP	(PRCM_AVS_BASE + 0x1)
+#define PRCM_AVS_VBB_100_OPP	(PRCM_AVS_BASE + 0x2)
+#define PRCM_AVS_VBB_50_OPP	(PRCM_AVS_BASE + 0x3)
+#define PRCM_AVS_VARM_MAX_OPP	(PRCM_AVS_BASE + 0x4)
+#define PRCM_AVS_VARM_100_OPP	(PRCM_AVS_BASE + 0x5)
+#define PRCM_AVS_VARM_50_OPP	(PRCM_AVS_BASE + 0x6)
+#define PRCM_AVS_VARM_RET	(PRCM_AVS_BASE + 0x7)
+#define PRCM_AVS_VAPE_100_OPP	(PRCM_AVS_BASE + 0x8)
+#define PRCM_AVS_VAPE_50_OPP	(PRCM_AVS_BASE + 0x9)
+#define PRCM_AVS_VMOD_100_OPP	(PRCM_AVS_BASE + 0xA)
+#define PRCM_AVS_VMOD_50_OPP	(PRCM_AVS_BASE + 0xB)
+#define PRCM_AVS_VSAFE		(PRCM_AVS_BASE + 0xC)
 
-#define REQ_MB1_ARMOPP		(REQ_MB1 + 0x0)
-#define REQ_MB1_APEOPP		(REQ_MB1 + 0x1)
-#define REQ_MB1_BOOSTOPP	(REQ_MB1 + 0x2)
+#define PRCM_AVS_VOLTAGE		0
+#define PRCM_AVS_VOLTAGE_MASK		0x3f
+#define PRCM_AVS_ISSLOWSTARTUP		6
+#define PRCM_AVS_ISSLOWSTARTUP_MASK	(1 << PRCM_AVS_ISSLOWSTARTUP)
+#define PRCM_AVS_ISMODEENABLE		7
+#define PRCM_AVS_ISMODEENABLE_MASK	(1 << PRCM_AVS_ISMODEENABLE)
 
-#define ACK_MB1 (tcdm_base + 0xE04)
-#define ACK_MB5 (tcdm_base + 0xDF4)
+#define PRCM_BOOT_STATUS	0xFFF
+#define PRCM_ROMCODE_A2P	0xFFE
+#define PRCM_ROMCODE_P2A	0xFFD
+#define PRCM_XP70_CUR_PWR_STATE 0xFFC      /* 4 BYTES */
 
-#define ACK_MB1_CURR_ARMOPP		(ACK_MB1 + 0x0)
-#define ACK_MB1_CURR_APEOPP		(ACK_MB1 + 0x1)
+#define PRCM_SW_RST_REASON 0xFF8 /* 2 bytes */
 
-#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5)
-#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1)
-#define REQ_MB5_I2C_REG (REQ_MB5 + 2)
-#define REQ_MB5_I2C_VAL (REQ_MB5 + 3)
+#define _PRCM_MBOX_HEADER		0xFE8 /* 16 bytes */
+#define PRCM_MBOX_HEADER_REQ_MB0	(_PRCM_MBOX_HEADER + 0x0)
+#define PRCM_MBOX_HEADER_REQ_MB1	(_PRCM_MBOX_HEADER + 0x1)
+#define PRCM_MBOX_HEADER_REQ_MB2	(_PRCM_MBOX_HEADER + 0x2)
+#define PRCM_MBOX_HEADER_REQ_MB3	(_PRCM_MBOX_HEADER + 0x3)
+#define PRCM_MBOX_HEADER_REQ_MB4	(_PRCM_MBOX_HEADER + 0x4)
+#define PRCM_MBOX_HEADER_REQ_MB5	(_PRCM_MBOX_HEADER + 0x5)
+#define PRCM_MBOX_HEADER_ACK_MB0	(_PRCM_MBOX_HEADER + 0x8)
 
-#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1)
-#define ACK_MB5_I2C_VAL (ACK_MB5 + 3)
+/* Req Mailboxes */
+#define PRCM_REQ_MB0 0xFDC /* 12 bytes  */
+#define PRCM_REQ_MB1 0xFD0 /* 12 bytes  */
+#define PRCM_REQ_MB2 0xFC0 /* 16 bytes  */
+#define PRCM_REQ_MB3 0xE4C /* 372 bytes  */
+#define PRCM_REQ_MB4 0xE48 /* 4 bytes  */
+#define PRCM_REQ_MB5 0xE44 /* 4 bytes  */
 
-#define PRCM_AVS_VARM_MAX_OPP		(tcdm_base + 0x2E4)
-#define PRCM_AVS_ISMODEENABLE		7
-#define PRCM_AVS_ISMODEENABLE_MASK	(1 << PRCM_AVS_ISMODEENABLE)
+/* Ack Mailboxes */
+#define PRCM_ACK_MB0 0xE08 /* 52 bytes  */
+#define PRCM_ACK_MB1 0xE04 /* 4 bytes */
+#define PRCM_ACK_MB2 0xE00 /* 4 bytes */
+#define PRCM_ACK_MB3 0xDFC /* 4 bytes */
+#define PRCM_ACK_MB4 0xDF8 /* 4 bytes */
+#define PRCM_ACK_MB5 0xDF4 /* 4 bytes */
+
+/* Mailbox 0 headers */
+#define MB0H_POWER_STATE_TRANS		0
+#define MB0H_CONFIG_WAKEUPS_EXE		1
+#define MB0H_READ_WAKEUP_ACK		3
+#define MB0H_CONFIG_WAKEUPS_SLEEP	4
+
+#define MB0H_WAKEUP_EXE 2
+#define MB0H_WAKEUP_SLEEP 5
+
+/* Mailbox 0 REQs */
+#define PRCM_REQ_MB0_AP_POWER_STATE	(PRCM_REQ_MB0 + 0x0)
+#define PRCM_REQ_MB0_AP_PLL_STATE	(PRCM_REQ_MB0 + 0x1)
+#define PRCM_REQ_MB0_ULP_CLOCK_STATE	(PRCM_REQ_MB0 + 0x2)
+#define PRCM_REQ_MB0_DO_NOT_WFI		(PRCM_REQ_MB0 + 0x3)
+#define PRCM_REQ_MB0_WAKEUP_8500	(PRCM_REQ_MB0 + 0x4)
+#define PRCM_REQ_MB0_WAKEUP_4500	(PRCM_REQ_MB0 + 0x8)
+
+/* Mailbox 0 ACKs */
+#define PRCM_ACK_MB0_AP_PWRSTTR_STATUS	(PRCM_ACK_MB0 + 0x0)
+#define PRCM_ACK_MB0_READ_POINTER	(PRCM_ACK_MB0 + 0x1)
+#define PRCM_ACK_MB0_WAKEUP_0_8500	(PRCM_ACK_MB0 + 0x4)
+#define PRCM_ACK_MB0_WAKEUP_0_4500	(PRCM_ACK_MB0 + 0x8)
+#define PRCM_ACK_MB0_WAKEUP_1_8500	(PRCM_ACK_MB0 + 0x1C)
+#define PRCM_ACK_MB0_WAKEUP_1_4500	(PRCM_ACK_MB0 + 0x20)
+#define PRCM_ACK_MB0_EVENT_4500_NUMBERS	20
+
+/* Mailbox 1 headers */
+#define MB1H_ARM_APE_OPP 0x0
+#define MB1H_RESET_MODEM 0x2
+#define MB1H_REQUEST_APE_OPP_100_VOLT 0x3
+#define MB1H_RELEASE_APE_OPP_100_VOLT 0x4
+#define MB1H_RELEASE_USB_WAKEUP 0x5
+
+/* Mailbox 1 Requests */
+#define PRCM_REQ_MB1_ARM_OPP			(PRCM_REQ_MB1 + 0x0)
+#define PRCM_REQ_MB1_APE_OPP			(PRCM_REQ_MB1 + 0x1)
+#define PRCM_REQ_MB1_APE_OPP_100_RESTORE	(PRCM_REQ_MB1 + 0x4)
+#define PRCM_REQ_MB1_ARM_OPP_100_RESTORE	(PRCM_REQ_MB1 + 0x8)
+
+/* Mailbox 1 ACKs */
+#define PRCM_ACK_MB1_CURRENT_ARM_OPP	(PRCM_ACK_MB1 + 0x0)
+#define PRCM_ACK_MB1_CURRENT_APE_OPP	(PRCM_ACK_MB1 + 0x1)
+#define PRCM_ACK_MB1_APE_VOLTAGE_STATUS	(PRCM_ACK_MB1 + 0x2)
+#define PRCM_ACK_MB1_DVFS_STATUS	(PRCM_ACK_MB1 + 0x3)
+
+/* Mailbox 2 headers */
+#define MB2H_DPS	0x0
+#define MB2H_AUTO_PWR	0x1
+
+/* Mailbox 2 REQs */
+#define PRCM_REQ_MB2_SVA_MMDSP		(PRCM_REQ_MB2 + 0x0)
+#define PRCM_REQ_MB2_SVA_PIPE		(PRCM_REQ_MB2 + 0x1)
+#define PRCM_REQ_MB2_SIA_MMDSP		(PRCM_REQ_MB2 + 0x2)
+#define PRCM_REQ_MB2_SIA_PIPE		(PRCM_REQ_MB2 + 0x3)
+#define PRCM_REQ_MB2_SGA		(PRCM_REQ_MB2 + 0x4)
+#define PRCM_REQ_MB2_B2R2_MCDE		(PRCM_REQ_MB2 + 0x5)
+#define PRCM_REQ_MB2_ESRAM12		(PRCM_REQ_MB2 + 0x6)
+#define PRCM_REQ_MB2_ESRAM34		(PRCM_REQ_MB2 + 0x7)
+#define PRCM_REQ_MB2_AUTO_PM_SLEEP	(PRCM_REQ_MB2 + 0x8)
+#define PRCM_REQ_MB2_AUTO_PM_IDLE	(PRCM_REQ_MB2 + 0xC)
 
-#define I2C_WRITE(slave) \
+/* Mailbox 2 ACKs */
+#define PRCM_ACK_MB2_DPS_STATUS (PRCM_ACK_MB2 + 0x0)
+#define HWACC_PWR_ST_OK 0xFE
+
+/* Mailbox 3 headers */
+#define MB3H_ANC	0x0
+#define MB3H_SIDETONE	0x1
+#define MB3H_SYSCLK	0xE
+
+/* Mailbox 3 Requests */
+#define PRCM_REQ_MB3_ANC_FIR_COEFF	(PRCM_REQ_MB3 + 0x0)
+#define PRCM_REQ_MB3_ANC_IIR_COEFF	(PRCM_REQ_MB3 + 0x20)
+#define PRCM_REQ_MB3_ANC_SHIFTER	(PRCM_REQ_MB3 + 0x60)
+#define PRCM_REQ_MB3_ANC_WARP		(PRCM_REQ_MB3 + 0x64)
+#define PRCM_REQ_MB3_SIDETONE_FIR_GAIN	(PRCM_REQ_MB3 + 0x68)
+#define PRCM_REQ_MB3_SIDETONE_FIR_COEFF	(PRCM_REQ_MB3 + 0x6C)
+#define PRCM_REQ_MB3_SYSCLK_MGT		(PRCM_REQ_MB3 + 0x16C)
+
+/* Mailbox 4 headers */
+#define MB4H_DDR_INIT	0x0
+#define MB4H_MEM_ST	0x1
+#define MB4H_HOTDOG	0x12
+#define MB4H_HOTMON	0x13
+#define MB4H_HOT_PERIOD	0x14
+
+/* Mailbox 4 Requests */
+#define PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE	(PRCM_REQ_MB4 + 0x0)
+#define PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE	(PRCM_REQ_MB4 + 0x1)
+#define PRCM_REQ_MB4_ESRAM0_ST			(PRCM_REQ_MB4 + 0x3)
+#define PRCM_REQ_MB4_HOTDOG_THRESHOLD		(PRCM_REQ_MB4 + 0x0)
+#define PRCM_REQ_MB4_HOTMON_LOW			(PRCM_REQ_MB4 + 0x0)
+#define PRCM_REQ_MB4_HOTMON_HIGH		(PRCM_REQ_MB4 + 0x1)
+#define PRCM_REQ_MB4_HOTMON_CONFIG		(PRCM_REQ_MB4 + 0x2)
+#define PRCM_REQ_MB4_HOT_PERIOD			(PRCM_REQ_MB4 + 0x0)
+#define HOTMON_CONFIG_LOW			BIT(0)
+#define HOTMON_CONFIG_HIGH			BIT(1)
+
+/* Mailbox 5 Requests */
+#define PRCM_REQ_MB5_I2C_SLAVE_OP	(PRCM_REQ_MB5 + 0x0)
+#define PRCM_REQ_MB5_I2C_HW_BITS	(PRCM_REQ_MB5 + 0x1)
+#define PRCM_REQ_MB5_I2C_REG		(PRCM_REQ_MB5 + 0x2)
+#define PRCM_REQ_MB5_I2C_VAL		(PRCM_REQ_MB5 + 0x3)
+#define PRCMU_I2C_WRITE(slave) \
 	(((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0))
-#define I2C_READ(slave) \
-	(((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0) | BIT(0))
-#define I2C_STOP_EN BIT(3)
-
-enum mb1_h {
-	MB1H_ARM_OPP = 1,
-	MB1H_APE_OPP,
-	MB1H_ARM_APE_OPP,
+#define PRCMU_I2C_READ(slave) \
+	(((slave) << 1) | BIT(0) | (cpu_is_u8500v2() ? BIT(6) : 0))
+#define PRCMU_I2C_STOP_EN		BIT(3)
+
+/* Mailbox 5 ACKs */
+#define PRCM_ACK_MB5_I2C_STATUS	(PRCM_ACK_MB5 + 0x1)
+#define PRCM_ACK_MB5_I2C_VAL	(PRCM_ACK_MB5 + 0x3)
+#define I2C_WR_OK 0x1
+#define I2C_RD_OK 0x2
+
+#define NUM_MB 8
+#define MBOX_BIT BIT
+#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1)
+
+/*
+ * Wakeups/IRQs
+ */
+
+#define WAKEUP_BIT_RTC BIT(0)
+#define WAKEUP_BIT_RTT0 BIT(1)
+#define WAKEUP_BIT_RTT1 BIT(2)
+#define WAKEUP_BIT_HSI0 BIT(3)
+#define WAKEUP_BIT_HSI1 BIT(4)
+#define WAKEUP_BIT_CA_WAKE BIT(5)
+#define WAKEUP_BIT_USB BIT(6)
+#define WAKEUP_BIT_ABB BIT(7)
+#define WAKEUP_BIT_ABB_FIFO BIT(8)
+#define WAKEUP_BIT_SYSCLK_OK BIT(9)
+#define WAKEUP_BIT_CA_SLEEP BIT(10)
+#define WAKEUP_BIT_AC_WAKE_ACK BIT(11)
+#define WAKEUP_BIT_SIDE_TONE_OK BIT(12)
+#define WAKEUP_BIT_ANC_OK BIT(13)
+#define WAKEUP_BIT_SW_ERROR BIT(14)
+#define WAKEUP_BIT_AC_SLEEP_ACK BIT(15)
+#define WAKEUP_BIT_ARM BIT(17)
+#define WAKEUP_BIT_HOTMON_LOW BIT(18)
+#define WAKEUP_BIT_HOTMON_HIGH BIT(19)
+#define WAKEUP_BIT_MODEM_SW_RESET_REQ BIT(20)
+#define WAKEUP_BIT_GPIO0 BIT(23)
+#define WAKEUP_BIT_GPIO1 BIT(24)
+#define WAKEUP_BIT_GPIO2 BIT(25)
+#define WAKEUP_BIT_GPIO3 BIT(26)
+#define WAKEUP_BIT_GPIO4 BIT(27)
+#define WAKEUP_BIT_GPIO5 BIT(28)
+#define WAKEUP_BIT_GPIO6 BIT(29)
+#define WAKEUP_BIT_GPIO7 BIT(30)
+#define WAKEUP_BIT_GPIO8 BIT(31)
+
+/*
+ * This vector maps irq numbers to the bits in the bit field used in
+ * communication with the PRCMU firmware.
+ *
+ * The reason for having this is to keep the irq numbers contiguous even though
+ * the bits in the bit field are not. (The bits also have a tendency to move
+ * around, to further complicate matters.)
+ */
+#define IRQ_INDEX(_name) ((IRQ_PRCMU_##_name) - IRQ_PRCMU_BASE)
+#define IRQ_ENTRY(_name)[IRQ_INDEX(_name)] = (WAKEUP_BIT_##_name)
+static u32 prcmu_irq_bit[NUM_PRCMU_WAKEUPS] = {
+	IRQ_ENTRY(RTC),
+	IRQ_ENTRY(RTT0),
+	IRQ_ENTRY(RTT1),
+	IRQ_ENTRY(HSI0),
+	IRQ_ENTRY(HSI1),
+	IRQ_ENTRY(CA_WAKE),
+	IRQ_ENTRY(USB),
+	IRQ_ENTRY(ABB),
+	IRQ_ENTRY(ABB_FIFO),
+	IRQ_ENTRY(CA_SLEEP),
+	IRQ_ENTRY(ARM),
+	IRQ_ENTRY(HOTMON_LOW),
+	IRQ_ENTRY(HOTMON_HIGH),
+	IRQ_ENTRY(MODEM_SW_RESET_REQ),
+	IRQ_ENTRY(GPIO0),
+	IRQ_ENTRY(GPIO1),
+	IRQ_ENTRY(GPIO2),
+	IRQ_ENTRY(GPIO3),
+	IRQ_ENTRY(GPIO4),
+	IRQ_ENTRY(GPIO5),
+	IRQ_ENTRY(GPIO6),
+	IRQ_ENTRY(GPIO7),
+	IRQ_ENTRY(GPIO8)
+};
+
+#define VALID_WAKEUPS (BIT(NUM_PRCMU_WAKEUP_INDICES) - 1)
+#define WAKEUP_ENTRY(_name)[PRCMU_WAKEUP_INDEX_##_name] = (WAKEUP_BIT_##_name)
+static u32 prcmu_wakeup_bit[NUM_PRCMU_WAKEUP_INDICES] = {
+	WAKEUP_ENTRY(RTC),
+	WAKEUP_ENTRY(RTT0),
+	WAKEUP_ENTRY(RTT1),
+	WAKEUP_ENTRY(HSI0),
+	WAKEUP_ENTRY(HSI1),
+	WAKEUP_ENTRY(USB),
+	WAKEUP_ENTRY(ABB),
+	WAKEUP_ENTRY(ABB_FIFO),
+	WAKEUP_ENTRY(ARM)
 };
 
+/*
+ * mb0_transfer - state needed for mailbox 0 communication.
+ * @lock:		The transaction lock.
+ * @dbb_events_lock:	A lock used to handle concurrent access to (parts of)
+ *			the request data.
+ * @mask_work:		Work structure used for (un)masking wakeup interrupts.
+ * @req:		Request data that need to persist between requests.
+ */
+static struct {
+	spinlock_t lock;
+	spinlock_t dbb_irqs_lock;
+	struct work_struct mask_work;
+	struct mutex ac_wake_lock;
+	struct completion ac_wake_work;
+	struct {
+		u32 dbb_irqs;
+		u32 dbb_wakeups;
+		u32 abb_events;
+	} req;
+} mb0_transfer;
+
+/*
+ * mb1_transfer - state needed for mailbox 1 communication.
+ * @lock:	The transaction lock.
+ * @work:	The transaction completion structure.
+ * @ack:	Reply ("acknowledge") data.
+ */
 static struct {
 	struct mutex lock;
 	struct completion work;
 	struct {
+		u8 header;
 		u8 arm_opp;
 		u8 ape_opp;
-		u8 arm_status;
-		u8 ape_status;
+		u8 ape_voltage_status;
 	} ack;
 } mb1_transfer;
 
-enum ack_mb5_status {
-	I2C_WR_OK = 0x01,
-	I2C_RD_OK = 0x02,
-};
+/*
+ * mb2_transfer - state needed for mailbox 2 communication.
+ * @lock:            The transaction lock.
+ * @work:            The transaction completion structure.
+ * @auto_pm_lock:    The autonomous power management configuration lock.
+ * @auto_pm_enabled: A flag indicating whether autonomous PM is enabled.
+ * @req:             Request data that need to persist between requests.
+ * @ack:             Reply ("acknowledge") data.
+ */
+static struct {
+	struct mutex lock;
+	struct completion work;
+	spinlock_t auto_pm_lock;
+	bool auto_pm_enabled;
+	struct {
+		u8 status;
+	} ack;
+} mb2_transfer;
 
-#define MBOX_BIT BIT
-#define NUM_MBOX 8
+/*
+ * mb3_transfer - state needed for mailbox 3 communication.
+ * @lock:		The request lock.
+ * @sysclk_lock:	A lock used to handle concurrent sysclk requests.
+ * @sysclk_work:	Work structure used for sysclk requests.
+ */
+static struct {
+	spinlock_t lock;
+	struct mutex sysclk_lock;
+	struct completion sysclk_work;
+} mb3_transfer;
 
+/*
+ * mb4_transfer - state needed for mailbox 4 communication.
+ * @lock:	The transaction lock.
+ * @work:	The transaction completion structure.
+ */
+static struct {
+	struct mutex lock;
+	struct completion work;
+} mb4_transfer;
+
+/*
+ * mb5_transfer - state needed for mailbox 5 communication.
+ * @lock:	The transaction lock.
+ * @work:	The transaction completion structure.
+ * @ack:	Reply ("acknowledge") data.
+ */
 static struct {
 	struct mutex lock;
 	struct completion work;
-	bool failed;
 	struct {
 		u8 status;
 		u8 value;
 	} ack;
 } mb5_transfer;
 
+static atomic_t ac_wake_req_state = ATOMIC_INIT(0);
+
+/* Spinlocks */
+static DEFINE_SPINLOCK(clkout_lock);
+static DEFINE_SPINLOCK(gpiocr_lock);
+
+/* Global var to runtime determine TCDM base for v2 or v1 */
+static __iomem void *tcdm_base;
+
+struct clk_mgt {
+	unsigned int offset;
+	u32 pllsw;
+};
+
+static DEFINE_SPINLOCK(clk_mgt_lock);
+
+#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT), 0 }
+struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
+	CLK_MGT_ENTRY(SGACLK),
+	CLK_MGT_ENTRY(UARTCLK),
+	CLK_MGT_ENTRY(MSP02CLK),
+	CLK_MGT_ENTRY(MSP1CLK),
+	CLK_MGT_ENTRY(I2CCLK),
+	CLK_MGT_ENTRY(SDMMCCLK),
+	CLK_MGT_ENTRY(SLIMCLK),
+	CLK_MGT_ENTRY(PER1CLK),
+	CLK_MGT_ENTRY(PER2CLK),
+	CLK_MGT_ENTRY(PER3CLK),
+	CLK_MGT_ENTRY(PER5CLK),
+	CLK_MGT_ENTRY(PER6CLK),
+	CLK_MGT_ENTRY(PER7CLK),
+	CLK_MGT_ENTRY(LCDCLK),
+	CLK_MGT_ENTRY(BMLCLK),
+	CLK_MGT_ENTRY(HSITXCLK),
+	CLK_MGT_ENTRY(HSIRXCLK),
+	CLK_MGT_ENTRY(HDMICLK),
+	CLK_MGT_ENTRY(APEATCLK),
+	CLK_MGT_ENTRY(APETRACECLK),
+	CLK_MGT_ENTRY(MCDECLK),
+	CLK_MGT_ENTRY(IPI2CCLK),
+	CLK_MGT_ENTRY(DSIALTCLK),
+	CLK_MGT_ENTRY(DMACLK),
+	CLK_MGT_ENTRY(B2R2CLK),
+	CLK_MGT_ENTRY(TVCLK),
+	CLK_MGT_ENTRY(SSPCLK),
+	CLK_MGT_ENTRY(RNGCLK),
+	CLK_MGT_ENTRY(UICCCLK),
+};
+
+/*
+* Used by MCDE to setup all necessary PRCMU registers
+*/
+#define PRCMU_RESET_DSIPLL		0x00004000
+#define PRCMU_UNCLAMP_DSIPLL		0x00400800
+
+#define PRCMU_CLK_PLL_DIV_SHIFT		0
+#define PRCMU_CLK_PLL_SW_SHIFT		5
+#define PRCMU_CLK_38			(1 << 9)
+#define PRCMU_CLK_38_SRC		(1 << 10)
+#define PRCMU_CLK_38_DIV		(1 << 11)
+
+/* PLLDIV=12, PLLSW=4 (PLLDDR) */
+#define PRCMU_DSI_CLOCK_SETTING		0x0000008C
+
+/* PLLDIV=8, PLLSW=4 (PLLDDR) */
+#define PRCMU_DSI_CLOCK_SETTING_U8400	0x00000088
+
+/* DPI 50000000 Hz */
+#define PRCMU_DPI_CLOCK_SETTING		((1 << PRCMU_CLK_PLL_SW_SHIFT) | \
+					  (16 << PRCMU_CLK_PLL_DIV_SHIFT))
+#define PRCMU_DSI_LP_CLOCK_SETTING	0x00000E00
+
+/* D=101, N=1, R=4, SELDIV2=0 */
+#define PRCMU_PLLDSI_FREQ_SETTING	0x00040165
+
+/* D=70, N=1, R=3, SELDIV2=0 */
+#define PRCMU_PLLDSI_FREQ_SETTING_U8400	0x00030146
+
+#define PRCMU_ENABLE_PLLDSI		0x00000001
+#define PRCMU_DISABLE_PLLDSI		0x00000000
+#define PRCMU_RELEASE_RESET_DSS		0x0000400C
+#define PRCMU_DSI_PLLOUT_SEL_SETTING	0x00000202
+/* ESC clk, div0=1, div1=1, div2=3 */
+#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV	0x07030101
+#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV	0x00030101
+#define PRCMU_DSI_RESET_SW		0x00000007
+
+#define PRCMU_PLLDSI_LOCKP_LOCKED	0x3
+
+static struct {
+	u8 project_number;
+	u8 api_version;
+	u8 func_version;
+	u8 errata;
+} prcmu_version;
+
+
+int prcmu_enable_dsipll(void)
+{
+	int i;
+	unsigned int plldsifreq;
+
+	/* Clear DSIPLL_RESETN */
+	writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_CLR));
+	/* Unclamp DSIPLL in/out */
+	writel(PRCMU_UNCLAMP_DSIPLL, (_PRCMU_BASE + PRCM_MMIP_LS_CLAMP_CLR));
+
+	if (prcmu_is_u8400())
+		plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400;
+	else
+		plldsifreq = PRCMU_PLLDSI_FREQ_SETTING;
+	/* Set DSI PLL FREQ */
+	writel(plldsifreq, (_PRCMU_BASE + PRCM_PLLDSI_FREQ));
+	writel(PRCMU_DSI_PLLOUT_SEL_SETTING,
+		(_PRCMU_BASE + PRCM_DSI_PLLOUT_SEL));
+	/* Enable Escape clocks */
+	writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV,
+					(_PRCMU_BASE + PRCM_DSITVCLK_DIV));
+
+	/* Start DSI PLL */
+	writel(PRCMU_ENABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
+	/* Reset DSI PLL */
+	writel(PRCMU_DSI_RESET_SW, (_PRCMU_BASE + PRCM_DSI_SW_RESET));
+	for (i = 0; i < 10; i++) {
+		if ((readl(_PRCMU_BASE + PRCM_PLLDSI_LOCKP) &
+			PRCMU_PLLDSI_LOCKP_LOCKED)
+					== PRCMU_PLLDSI_LOCKP_LOCKED)
+			break;
+		udelay(100);
+	}
+	/* Set DSIPLL_RESETN */
+	writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_SET));
+	return 0;
+}
+
+int prcmu_disable_dsipll(void)
+{
+	/* Disable dsi pll */
+	writel(PRCMU_DISABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
+	/* Disable  escapeclock */
+	writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV,
+					(_PRCMU_BASE + PRCM_DSITVCLK_DIV));
+	return 0;
+}
+
+int prcmu_set_display_clocks(void)
+{
+	unsigned long flags;
+	unsigned int dsiclk;
+
+	if (prcmu_is_u8400())
+		dsiclk = PRCMU_DSI_CLOCK_SETTING_U8400;
+	else
+		dsiclk = PRCMU_DSI_CLOCK_SETTING;
+
+	spin_lock_irqsave(&clk_mgt_lock, flags);
+
+	/* Grab the HW semaphore. */
+	while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+		cpu_relax();
+
+	writel(dsiclk, (_PRCMU_BASE + PRCM_HDMICLK_MGT));
+	writel(PRCMU_DSI_LP_CLOCK_SETTING, (_PRCMU_BASE + PRCM_TVCLK_MGT));
+	writel(PRCMU_DPI_CLOCK_SETTING, (_PRCMU_BASE + PRCM_LCDCLK_MGT));
+
+	/* Release the HW semaphore. */
+	writel(0, (_PRCMU_BASE + PRCM_SEM));
+
+	spin_unlock_irqrestore(&clk_mgt_lock, flags);
+
+	return 0;
+}
+
+/**
+ * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1.
+ */
+void prcmu_enable_spi2(void)
+{
+	u32 reg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpiocr_lock, flags);
+	reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
+	writel(reg | PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
+	spin_unlock_irqrestore(&gpiocr_lock, flags);
+}
+
+/**
+ * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1.
+ */
+void prcmu_disable_spi2(void)
+{
+	u32 reg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpiocr_lock, flags);
+	reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
+	writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
+	spin_unlock_irqrestore(&gpiocr_lock, flags);
+}
+
+bool prcmu_has_arm_maxopp(void)
+{
+	return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) &
+		PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK;
+}
+
+bool prcmu_is_u8400(void)
+{
+	return prcmu_version.project_number == PRCMU_PROJECT_ID_8400V2_0;
+}
+
+/**
+ * prcmu_get_boot_status - PRCMU boot status checking
+ * Returns: the current PRCMU boot status
+ */
+int prcmu_get_boot_status(void)
+{
+	return readb(tcdm_base + PRCM_BOOT_STATUS);
+}
+
+/**
+ * prcmu_set_rc_a2p - This function is used to run few power state sequences
+ * @val: Value to be set, i.e. transition requested
+ * Returns: 0 on success, -EINVAL on invalid argument
+ *
+ * This function is used to run the following power state sequences -
+ * any state to ApReset,  ApDeepSleep to ApExecute, ApExecute to ApDeepSleep
+ */
+int prcmu_set_rc_a2p(enum romcode_write val)
+{
+	if (val < RDY_2_DS || val > RDY_2_XP70_RST)
+		return -EINVAL;
+	writeb(val, (tcdm_base + PRCM_ROMCODE_A2P));
+	return 0;
+}
+
+/**
+ * prcmu_get_rc_p2a - This function is used to get power state sequences
+ * Returns: the power transition that has last happened
+ *
+ * This function can return the following transitions-
+ * any state to ApReset,  ApDeepSleep to ApExecute, ApExecute to ApDeepSleep
+ */
+enum romcode_read prcmu_get_rc_p2a(void)
+{
+	return readb(tcdm_base + PRCM_ROMCODE_P2A);
+}
+
+/**
+ * prcmu_get_current_mode - Return the current XP70 power mode
+ * Returns: Returns the current AP(ARM) power mode: init,
+ * apBoot, apExecute, apDeepSleep, apSleep, apIdle, apReset
+ */
+enum ap_pwrst prcmu_get_xp70_current_state(void)
+{
+	return readb(tcdm_base + PRCM_XP70_CUR_PWR_STATE);
+}
+
+/**
+ * prcmu_config_clkout - Configure one of the programmable clock outputs.
+ * @clkout:	The CLKOUT number (0 or 1).
+ * @source:	The clock to be used (one of the PRCMU_CLKSRC_*).
+ * @div:	The divider to be applied.
+ *
+ * Configures one of the programmable clock outputs (CLKOUTs).
+ * @div should be in the range [1,63] to request a configuration, or 0 to
+ * inform that the configuration is no longer requested.
+ */
+int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
+{
+	static int requests[2];
+	int r = 0;
+	unsigned long flags;
+	u32 val;
+	u32 bits;
+	u32 mask;
+	u32 div_mask;
+
+	BUG_ON(clkout > 1);
+	BUG_ON(div > 63);
+	BUG_ON((clkout == 0) && (source > PRCMU_CLKSRC_CLK009));
+
+	if (!div && !requests[clkout])
+		return -EINVAL;
+
+	switch (clkout) {
+	case 0:
+		div_mask = PRCM_CLKOCR_CLKODIV0_MASK;
+		mask = (PRCM_CLKOCR_CLKODIV0_MASK | PRCM_CLKOCR_CLKOSEL0_MASK);
+		bits = ((source << PRCM_CLKOCR_CLKOSEL0_SHIFT) |
+			(div << PRCM_CLKOCR_CLKODIV0_SHIFT));
+		break;
+	case 1:
+		div_mask = PRCM_CLKOCR_CLKODIV1_MASK;
+		mask = (PRCM_CLKOCR_CLKODIV1_MASK | PRCM_CLKOCR_CLKOSEL1_MASK |
+			PRCM_CLKOCR_CLK1TYPE);
+		bits = ((source << PRCM_CLKOCR_CLKOSEL1_SHIFT) |
+			(div << PRCM_CLKOCR_CLKODIV1_SHIFT));
+		break;
+	}
+	bits &= mask;
+
+	spin_lock_irqsave(&clkout_lock, flags);
+
+	val = readl(_PRCMU_BASE + PRCM_CLKOCR);
+	if (val & div_mask) {
+		if (div) {
+			if ((val & mask) != bits) {
+				r = -EBUSY;
+				goto unlock_and_return;
+			}
+		} else {
+			if ((val & mask & ~div_mask) != bits) {
+				r = -EINVAL;
+				goto unlock_and_return;
+			}
+		}
+	}
+	writel((bits | (val & ~mask)), (_PRCMU_BASE + PRCM_CLKOCR));
+	requests[clkout] += (div ? 1 : -1);
+
+unlock_and_return:
+	spin_unlock_irqrestore(&clkout_lock, flags);
+
+	return r;
+}
+
+int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
+{
+	unsigned long flags;
+
+	BUG_ON((state < PRCMU_AP_SLEEP) || (PRCMU_AP_DEEP_IDLE < state));
+
+	spin_lock_irqsave(&mb0_transfer.lock, flags);
+
+	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+		cpu_relax();
+
+	writeb(MB0H_POWER_STATE_TRANS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
+	writeb(state, (tcdm_base + PRCM_REQ_MB0_AP_POWER_STATE));
+	writeb((keep_ap_pll ? 1 : 0), (tcdm_base + PRCM_REQ_MB0_AP_PLL_STATE));
+	writeb((keep_ulp_clk ? 1 : 0),
+		(tcdm_base + PRCM_REQ_MB0_ULP_CLOCK_STATE));
+	writeb(0, (tcdm_base + PRCM_REQ_MB0_DO_NOT_WFI));
+	writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+
+	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
+
+	return 0;
+}
+
+/* This function should only be called while mb0_transfer.lock is held. */
+static void config_wakeups(void)
+{
+	const u8 header[2] = {
+		MB0H_CONFIG_WAKEUPS_EXE,
+		MB0H_CONFIG_WAKEUPS_SLEEP
+	};
+	static u32 last_dbb_events;
+	static u32 last_abb_events;
+	u32 dbb_events;
+	u32 abb_events;
+	unsigned int i;
+
+	dbb_events = mb0_transfer.req.dbb_irqs | mb0_transfer.req.dbb_wakeups;
+	dbb_events |= (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK);
+
+	abb_events = mb0_transfer.req.abb_events;
+
+	if ((dbb_events == last_dbb_events) && (abb_events == last_abb_events))
+		return;
+
+	for (i = 0; i < 2; i++) {
+		while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+			cpu_relax();
+		writel(dbb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_8500));
+		writel(abb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_4500));
+		writeb(header[i], (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
+		writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	}
+	last_dbb_events = dbb_events;
+	last_abb_events = abb_events;
+}
+
+void prcmu_enable_wakeups(u32 wakeups)
+{
+	unsigned long flags;
+	u32 bits;
+	int i;
+
+	BUG_ON(wakeups != (wakeups & VALID_WAKEUPS));
+
+	for (i = 0, bits = 0; i < NUM_PRCMU_WAKEUP_INDICES; i++) {
+		if (wakeups & BIT(i))
+			bits |= prcmu_wakeup_bit[i];
+	}
+
+	spin_lock_irqsave(&mb0_transfer.lock, flags);
+
+	mb0_transfer.req.dbb_wakeups = bits;
+	config_wakeups();
+
+	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
+}
+
+void prcmu_config_abb_event_readout(u32 abb_events)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mb0_transfer.lock, flags);
+
+	mb0_transfer.req.abb_events = abb_events;
+	config_wakeups();
+
+	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
+}
+
+void prcmu_get_abb_event_buffer(void __iomem **buf)