diff options
author | Hugues Fruchet <hugues.fruchet@st.com> | 2019-08-14 10:48:53 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab+samsung@kernel.org> | 2019-08-19 12:06:38 -0300 |
commit | f4378baf07a200cbf7a3f0f4ba646aca6d3b11ac (patch) | |
tree | 9f35da847b8b92a1a4c444c7c5cdf77776b01385 /drivers/media | |
parent | 34f8d704a32a32064ff5ae35802a6011107ea5c1 (diff) |
media: stm32-dcmi: add support of several sub-devices
Add support of several sub-devices within pipeline instead
of a single one.
This allows to support a CSI-2 camera sensor connected
through a CSI-2 to parallel bridge.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Diffstat (limited to 'drivers/media')
-rw-r--r-- | drivers/media/platform/stm32/stm32-dcmi.c | 217 |
1 files changed, 198 insertions, 19 deletions
diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c index 10c8d4f67c53..cb1daf8217ff 100644 --- a/drivers/media/platform/stm32/stm32-dcmi.c +++ b/drivers/media/platform/stm32/stm32-dcmi.c @@ -172,6 +172,7 @@ struct stm32_dcmi { struct media_device mdev; struct media_pad vid_cap_pad; + struct media_pipeline pipeline; }; static inline struct stm32_dcmi *notifier_to_dcmi(struct v4l2_async_notifier *n) @@ -583,6 +584,144 @@ static void dcmi_buf_queue(struct vb2_buffer *vb) spin_unlock_irq(&dcmi->irqlock); } +static struct media_entity *dcmi_find_source(struct stm32_dcmi *dcmi) +{ + struct media_entity *entity = &dcmi->vdev->entity; + struct media_pad *pad; + + /* Walk searching for entity having no sink */ + while (1) { + pad = &entity->pads[0]; + if (!(pad->flags & MEDIA_PAD_FL_SINK)) + break; + + pad = media_entity_remote_pad(pad); + if (!pad || !is_media_entity_v4l2_subdev(pad->entity)) + break; + + entity = pad->entity; + } + + return entity; +} + +static int dcmi_pipeline_s_fmt(struct stm32_dcmi *dcmi, + struct v4l2_subdev_pad_config *pad_cfg, + struct v4l2_subdev_format *format) +{ + struct media_entity *entity = &dcmi->entity.source->entity; + struct v4l2_subdev *subdev; + struct media_pad *sink_pad = NULL; + struct media_pad *src_pad = NULL; + struct media_pad *pad = NULL; + struct v4l2_subdev_format fmt = *format; + bool found = false; + int ret; + + /* + * Starting from sensor subdevice, walk within + * pipeline and set format on each subdevice + */ + while (1) { + unsigned int i; + + /* Search if current entity has a source pad */ + for (i = 0; i < entity->num_pads; i++) { + pad = &entity->pads[i]; + if (pad->flags & MEDIA_PAD_FL_SOURCE) { + src_pad = pad; + found = true; + break; + } + } + if (!found) + break; + + subdev = media_entity_to_v4l2_subdev(entity); + + /* Propagate format on sink pad if any, otherwise source pad */ + if (sink_pad) + pad = sink_pad; + + dev_dbg(dcmi->dev, "\"%s\":%d pad format set to 0x%x %ux%u\n", + subdev->name, pad->index, format->format.code, + format->format.width, format->format.height); + + fmt.pad = pad->index; + ret = v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt); + if (ret < 0) { + dev_err(dcmi->dev, "%s: Failed to set format 0x%x %ux%u on \"%s\":%d pad (%d)\n", + __func__, format->format.code, + format->format.width, format->format.height, + subdev->name, pad->index, ret); + return ret; + } + + if (fmt.format.code != format->format.code || + fmt.format.width != format->format.width || + fmt.format.height != format->format.height) { + dev_dbg(dcmi->dev, "\"%s\":%d pad format has been changed to 0x%x %ux%u\n", + subdev->name, pad->index, fmt.format.code, + fmt.format.width, fmt.format.height); + } + + /* Walk to next entity */ + sink_pad = media_entity_remote_pad(src_pad); + if (!sink_pad || !is_media_entity_v4l2_subdev(sink_pad->entity)) + break; + + entity = sink_pad->entity; + } + *format = fmt; + + return 0; +} + +static int dcmi_pipeline_s_stream(struct stm32_dcmi *dcmi, int state) +{ + struct media_entity *entity = &dcmi->vdev->entity; + struct v4l2_subdev *subdev; + struct media_pad *pad; + int ret; + + /* Start/stop all entities within pipeline */ + while (1) { + pad = &entity->pads[0]; + if (!(pad->flags & MEDIA_PAD_FL_SINK)) + break; + + pad = media_entity_remote_pad(pad); + if (!pad || !is_media_entity_v4l2_subdev(pad->entity)) + break; + + entity = pad->entity; + subdev = media_entity_to_v4l2_subdev(entity); + + ret = v4l2_subdev_call(subdev, video, s_stream, state); + if (ret < 0 && ret != -ENOIOCTLCMD) { + dev_err(dcmi->dev, "%s: \"%s\" failed to %s streaming (%d)\n", + __func__, subdev->name, + state ? "start" : "stop", ret); + return ret; + } + + dev_dbg(dcmi->dev, "\"%s\" is %s\n", + subdev->name, state ? "started" : "stopped"); + } + + return 0; +} + +static int dcmi_pipeline_start(struct stm32_dcmi *dcmi) +{ + return dcmi_pipeline_s_stream(dcmi, 1); +} + +static void dcmi_pipeline_stop(struct stm32_dcmi *dcmi) +{ + dcmi_pipeline_s_stream(dcmi, 0); +} + static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count) { struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq); @@ -597,14 +736,17 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count) goto err_release_buffers; } - /* Enable stream on the sub device */ - ret = v4l2_subdev_call(dcmi->entity.source, video, s_stream, 1); - if (ret && ret != -ENOIOCTLCMD) { - dev_err(dcmi->dev, "%s: Failed to start streaming, subdev streamon error", - __func__); + ret = media_pipeline_start(&dcmi->vdev->entity, &dcmi->pipeline); + if (ret < 0) { + dev_err(dcmi->dev, "%s: Failed to start streaming, media pipeline start error (%d)\n", + __func__, ret); goto err_pm_put; } + ret = dcmi_pipeline_start(dcmi); + if (ret) + goto err_media_pipeline_stop; + spin_lock_irq(&dcmi->irqlock); /* Set bus width */ @@ -676,7 +818,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count) if (ret) { dev_err(dcmi->dev, "%s: Start streaming failed, cannot start capture\n", __func__); - goto err_subdev_streamoff; + goto err_pipeline_stop; } /* Enable interruptions */ @@ -687,8 +829,11 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count) return 0; -err_subdev_streamoff: - v4l2_subdev_call(dcmi->entity.source, video, s_stream, 0); +err_pipeline_stop: + dcmi_pipeline_stop(dcmi); + +err_media_pipeline_stop: + media_pipeline_stop(&dcmi->vdev->entity); err_pm_put: pm_runtime_put(dcmi->dev); @@ -713,13 +858,10 @@ static void dcmi_stop_streaming(struct vb2_queue *vq) { struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq); struct dcmi_buf *buf, *node; - int ret; - /* Disable stream on the sub device */ - ret = v4l2_subdev_call(dcmi->entity.source, video, s_stream, 0); - if (ret && ret != -ENOIOCTLCMD) - dev_err(dcmi->dev, "%s: Failed to stop streaming, subdev streamoff error (%d)\n", - __func__, ret); + dcmi_pipeline_stop(dcmi); + + media_pipeline_stop(&dcmi->vdev->entity); spin_lock_irq(&dcmi->irqlock); @@ -937,8 +1079,7 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f) mf->width = sd_framesize.width; mf->height = sd_framesize.height; - ret = v4l2_subdev_call(dcmi->entity.source, pad, - set_fmt, NULL, &format); + ret = dcmi_pipeline_s_fmt(dcmi, NULL, &format); if (ret < 0) return ret; @@ -1412,6 +1553,12 @@ static int dcmi_set_default_fmt(struct stm32_dcmi *dcmi) return 0; } +/* + * FIXME: For the time being we only support subdevices + * which expose RGB & YUV "parallel form" mbus code (_2X8). + * Nevertheless, this allows to support serial source subdevices + * and serial to parallel bridges which conform to this. + */ static const struct dcmi_format dcmi_formats[] = { { .fourcc = V4L2_PIX_FMT_RGB565, @@ -1537,7 +1684,20 @@ static int dcmi_graph_notify_complete(struct v4l2_async_notifier *notifier) struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier); int ret; + /* + * Now that the graph is complete, + * we search for the source subdevice + * in order to expose it through V4L2 interface + */ + dcmi->entity.source = + media_entity_to_v4l2_subdev(dcmi_find_source(dcmi)); + if (!dcmi->entity.source) { + dev_err(dcmi->dev, "Source subdevice not found\n"); + return -ENODEV; + } + dcmi->vdev->ctrl_handler = dcmi->entity.source->ctrl_handler; + ret = dcmi_formats_init(dcmi); if (ret) { dev_err(dcmi->dev, "No supported mediabus format found\n"); @@ -1582,12 +1742,31 @@ static int dcmi_graph_notify_bound(struct v4l2_async_notifier *notifier, struct v4l2_async_subdev *asd) { struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier); + unsigned int ret; + int src_pad; - dev_dbg(dcmi->dev, "Subdev %s bound\n", subdev->name); + dev_dbg(dcmi->dev, "Subdev \"%s\" bound\n", subdev->name); - dcmi->entity.source = subdev; + /* + * Link this sub-device to DCMI, it could be + * a parallel camera sensor or a bridge + */ + src_pad = media_entity_get_fwnode_pad(&subdev->entity, + subdev->fwnode, + MEDIA_PAD_FL_SOURCE); + + ret = media_create_pad_link(&subdev->entity, src_pad, + &dcmi->vdev->entity, 0, + MEDIA_LNK_FL_IMMUTABLE | + MEDIA_LNK_FL_ENABLED); + if (ret) + dev_err(dcmi->dev, "Failed to create media pad link with subdev \"%s\"\n", + subdev->name); + else + dev_dbg(dcmi->dev, "DCMI is now linked to \"%s\"\n", + subdev->name); - return 0; + return ret; } static const struct v4l2_async_notifier_operations dcmi_graph_notify_ops = { |