media: remove redundant 'default n' from Kconfig-s

'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

5 files changed, 0 insertions, 16 deletions

diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 011c1c2fcf19..853330c642f1 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -5,7 +5,6 @@
 menuconfig V4L_PLATFORM_DRIVERS
 	bool "V4L platform devices"
 	depends on MEDIA_CAMERA_SUPPORT
-	default n
 	help
 	  Say Y here to enable support for platform-specific V4L drivers.
 
@@ -154,7 +153,6 @@ config VIDEO_TI_CAL
 	depends on SOC_DRA7XX || COMPILE_TEST
 	select VIDEOBUF2_DMA_CONTIG
 	select V4L2_FWNODE
-	default n
 	help
 	  Support for the TI CAL (Camera Adaptation Layer) block
 	  found on DRA72X SoC.
@@ -167,7 +165,6 @@ menuconfig V4L_MEM2MEM_DRIVERS
 	bool "Memory-to-memory multimedia devices"
 	depends on VIDEO_V4L2
 	depends on MEDIA_CAMERA_SUPPORT
-	default n
 	help
 	  Say Y here to enable selecting drivers for V4L devices that
 	  use system memory for both source and destination buffers, as opposed
@@ -235,7 +232,6 @@ config VIDEO_MEDIATEK_MDP
 	select VIDEOBUF2_DMA_CONTIG
 	select V4L2_MEM2MEM_DEV
 	select VIDEO_MEDIATEK_VPU
-	default n
 	help
 	    It is a v4l2 driver and present in Mediatek MT8173 SoCs.
 	    The driver supports for scaling and color space conversion.
@@ -251,7 +247,6 @@ config VIDEO_MEDIATEK_VCODEC
 	select VIDEOBUF2_DMA_CONTIG
 	select V4L2_MEM2MEM_DEV
 	select VIDEO_MEDIATEK_VPU
-	default n
 	help
 	    Mediatek video codec driver provides HW capability to
 	    encode and decode in a range of video formats
@@ -275,7 +270,6 @@ config VIDEO_SAMSUNG_S5P_G2D
 	depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
 	select VIDEOBUF2_DMA_CONTIG
 	select V4L2_MEM2MEM_DEV
-	default n
 	help
 	  This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D
 	  2d graphics accelerator.
@@ -295,7 +289,6 @@ config VIDEO_SAMSUNG_S5P_MFC
 	depends on VIDEO_DEV && VIDEO_V4L2
 	depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
 	select VIDEOBUF2_DMA_CONTIG
-	default n
 	help
 	    MFC 5.1 and 6.x driver for V4L2
 
@@ -458,7 +451,6 @@ config VIDEO_ROCKCHIP_RGA
 	depends on ARCH_ROCKCHIP || COMPILE_TEST
 	select VIDEOBUF2_DMA_SG
 	select V4L2_MEM2MEM_DEV
-	default n
 	help
 	  This is a v4l2 driver for Rockchip SOC RGA 2d graphics accelerator.
 	  Rockchip RGA is a separate 2D raster graphic acceleration unit.
@@ -476,7 +468,6 @@ config VIDEO_TI_VPE
 	select VIDEO_TI_VPDMA
 	select VIDEO_TI_SC
 	select VIDEO_TI_CSC
-	default n
 	help
 	  Support for the TI VPE(Video Processing Engine) block
 	  found on DRA7XX SoC.
@@ -529,7 +520,6 @@ config VIDEO_VIM2M
 	depends on VIDEO_DEV && VIDEO_V4L2
 	select VIDEOBUF2_VMALLOC
 	select V4L2_MEM2MEM_DEV
-	default n
 	help
 	  This is a virtual test device for the memory-to-memory driver
 	  framework.
@@ -541,7 +531,6 @@ endif #V4L_TEST_DRIVERS
 menuconfig DVB_PLATFORM_DRIVERS
 	bool "DVB platform devices"
 	depends on MEDIA_DIGITAL_TV_SUPPORT
-	default n
 	help
 	  Say Y here to enable support for platform-specific Digital TV drivers.
 
@@ -677,7 +666,6 @@ endif #CEC_PLATFORM_DRIVERS
 menuconfig SDR_PLATFORM_DRIVERS
 	bool "SDR platform devices"
 	depends on MEDIA_SDR_SUPPORT
-	default n
 	help
 	  Say Y here to enable support for platform-specific SDR Drivers.
 
diff --git a/drivers/media/platform/omap/Kconfig b/drivers/media/platform/omap/Kconfig
index 30ce2ba120a1..0af804bfe641 100644
--- a/drivers/media/platform/omap/Kconfig
+++ b/drivers/media/platform/omap/Kconfig
@@ -13,6 +13,5 @@ config VIDEO_OMAP2_VOUT
 	select VIDEOBUF_DMA_CONTIG
 	select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
 	select FRAME_VECTOR
-	default n
 	help
 	  V4L2 Display driver support for OMAP2/3 based boards.
diff --git a/drivers/media/platform/vicodec/Kconfig b/drivers/media/platform/vicodec/Kconfig
index ad13329e3461..6b662e2f5020 100644
--- a/drivers/media/platform/vicodec/Kconfig
+++ b/drivers/media/platform/vicodec/Kconfig
@@ -3,7 +3,6 @@ config VIDEO_VICODEC
 	depends on VIDEO_DEV && VIDEO_V4L2
 	select VIDEOBUF2_VMALLOC
 	select V4L2_MEM2MEM_DEV
-	default n
 	help
 	  Driver for a Virtual Codec
 
diff --git a/drivers/media/platform/vimc/Kconfig b/drivers/media/platform/vimc/Kconfig
index 1de9bc9aa49b..12ee961e4f23 100644
--- a/drivers/media/platform/vimc/Kconfig
+++ b/drivers/media/platform/vimc/Kconfig
@@ -3,7 +3,6 @@ config VIDEO_VIMC
 	depends on VIDEO_DEV && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	select VIDEOBUF2_VMALLOC
 	select VIDEO_V4L2_TPG
-	default n
 	help
 	  Skeleton driver for Virtual Media Controller
 
diff --git a/drivers/media/platform/vivid/Kconfig b/drivers/media/platform/vivid/Kconfig
index 4b51d4d6cf93..a90719a45014 100644
--- a/drivers/media/platform/vivid/Kconfig
+++ b/drivers/media/platform/vivid/Kconfig
@@ -10,7 +10,6 @@ config VIDEO_VIVID
 	select VIDEOBUF2_VMALLOC
 	select VIDEOBUF2_DMA_CONTIG
 	select VIDEO_V4L2_TPG
-	default n
 	help
 	  Enables a virtual video driver. This driver emulates a webcam,
 	  TV, S-Video and HDMI capture hardware, including VBI support for