Merge tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This has two exciting community drivers for ARM Mali accelerators.
  Since ARM has never been open source friendly on the GPU side of the
  house, the community has had to create open source drivers for the
  Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx
  series. Well done to all involved and hopefully this will help ARM
  head in the right direction.

  There is also now the ability if you don't have any of the legacy
  drivers enabled (pre-KMS) to remove all the pre-KMS support code from
  the core drm, this saves 10% or so in codesize on my machine.

  i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo
  moves out of staging.

  There are also some rcar-du patches which crossover with media tree
  but all should be acked by Mauro.

  Summary:

  uapi changes:
   - Colorspace connector property
   - fourcc - new YUV formts
   - timeline sync objects initially merged
   - expose FB_DAMAGE_CLIPS to atomic userspace

  new drivers:
   - vboxvideo: moved out of staging
   - aspeed: ASPEED SoC BMC chip display support
   - lima: ARM Mali4xx GPU acceleration driver support
   - panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support

  core:
   - component helper docs
   - unplugging fixes
   - devm device init
   - MIPI/DSI rate control
   - shmem backed gem objects
   - connector, display_info, edid_quirks cleanups
   - dma_buf fence chain support
   - 64-bit dma-fence seqno comparison fixes
   - move initial fb config code to core
   - gem fence array helpers for Lima
   - ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size)
   - lease fixes

  ttm:
   - unified DRM_FILE_PAGE_OFFSET handling
   - Account for kernel allocations in kernel zone only

  panel:
   - OSD070T1718-19TS panel support
   - panel-tpo-td028ttec1 backlight support
   - Ronbo RB070D30 MIPI/DSI
   - Feiyang FY07024DI26A30-D MIPI-DSI panel
   - Rocktech jh057n00900 MIPI-DSI panel

  i915:
   - Comet Lake (Gen9) PCI IDs
   - Updated Icelake PCI IDs
   - Elkhartlake (Gen11) support
   - DP MST property addtions
   - plane and watermark fixes
   - Icelake port sync and VEBOX disable fixes
   - struct_mutex usage reduction
   - Icelake gamma fix
   - GuC reset fixes
   - make mmap more asynchronous
   - sound display power well race fixes
   - DDI/MIPI-DSI clocks for Icelake
   - Icelake RPS frequency changing support
   - Icelake workarounds

  amdgpu:
   - Use HMM for userptr
   - vega20 experimental smu11 support
   - RAS support for vega20
   - BACO support for vega12 + fixes for vega20
   - reworked IH interrupt handling
   - amdkfd RAS support
   - Freesync improvements
   - initial timeline sync object support
   - DC Z ordering fixes
   - NV12 planes support
   - colorspace properties for planes=
   - eDP opts if eDP already initialized

  nouveau:
   - misc fixes

  etnaviv:
   - misc fixes

  msm:
   - GPU zap shader support expansion
   - robustness ABI addition

  exynos:
   - Logging cleanups

  tegra:
   - Shared reset fix
   - CPU cache maintenance fix

  cirrus:
   - driver rewritten using simple helpers

  meson:
   - G12A support

  vmwgfx:
   - Resource dirtying management improvements
   - Userspace logging improvements

  virtio:
   - PRIME fixes

  rockchip:
   - rk3066 hdmi support

  sun4i:
   - DSI burst mode support

  vc4:
   - load tracker to detect underflow

  v3d:
   - v3d v4.2 support

  malidp:
   - initial Mali D71 support in komeda driver

  tfp410:
   - omap related improvement

  omapdrm:
   - drm bridge/panel support
   - drop some omap specific panels

  rcar-du:
   - Display writeback support"

* tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits)
  drm/msm/a6xx: No zap shader is not an error
  drm/cma-helper: Fix drm_gem_cma_free_object()
  drm: Fix timestamp docs for variable refresh properties.
  drm/komeda: Mark the local functions as static
  drm/komeda: Fixed warning: Function parameter or member not described
  drm/komeda: Expose bus_width to Komeda-CORE
  drm/komeda: Add sysfs attribute: core_id and config_id
  drm: add non-desktop quirk for Valve HMDs
  drm/panfrost: Show stored feature registers
  drm/panfrost: Don't scream about deferred probe
  drm/panfrost: Disable PM on probe failure
  drm/panfrost: Set DMA masks earlier
  drm/panfrost: Add sanity checks to submit IOCTL
  drm/etnaviv: initialize idle mask before querying the HW db
  drm: introduce a capability flag for syncobj timeline support
  drm: report consistent errors when checking syncobj capibility
  drm/nouveau/nouveau: forward error generated while resuming objects tree
  drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully"
  drm/nouveau/i2c: Disable i2c bus access after ->fini()
  drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition
  ...

1 files changed, 56 insertions, 28 deletions

diff --git a/drivers/media/platform/vsp1/vsp1_dl.c b/drivers/media/platform/vsp1/vsp1_dl.c
index 26289adaf658..104b6f514536 100644
--- a/drivers/media/platform/vsp1/vsp1_dl.c
+++ b/drivers/media/platform/vsp1/vsp1_dl.c
@@ -178,7 +178,7 @@ struct vsp1_dl_cmd_pool {
  * @post_cmd: post command to be issued through extended dl header
  * @has_chain: if true, indicates that there's a partition chain
  * @chain: entry in the display list partition chain
- * @internal: whether the display list is used for internal purpose
+ * @flags: display list flags, a combination of VSP1_DL_FRAME_END_*
  */
 struct vsp1_dl_list {
 	struct list_head list;
@@ -197,7 +197,7 @@ struct vsp1_dl_list {
 	bool has_chain;
 	struct list_head chain;
 
-	bool internal;
+	unsigned int flags;
 };
 
 /**
@@ -699,8 +699,8 @@ struct vsp1_dl_body *vsp1_dl_list_get_body0(struct vsp1_dl_list *dl)
  * which bodies are added.
  *
  * Adding a body to a display list passes ownership of the body to the list. The
- * caller retains its reference to the fragment when adding it to the display
- * list, but is not allowed to add new entries to the body.
+ * caller retains its reference to the body when adding it to the display list,
+ * but is not allowed to add new entries to the body.
  *
  * The reference must be explicitly released by a call to vsp1_dl_body_put()
  * when the body isn't needed anymore.
@@ -770,17 +770,35 @@ static void vsp1_dl_list_fill_header(struct vsp1_dl_list *dl, bool is_last)
 	}
 
 	dl->header->num_lists = num_lists;
+	dl->header->flags = 0;
 
-	if (!list_empty(&dl->chain) && !is_last) {
+	/*
+	 * Enable the interrupt for the end of each frame. In continuous mode
+	 * chained lists are used with one list per frame, so enable the
+	 * interrupt for each list. In singleshot mode chained lists are used
+	 * to partition a single frame, so enable the interrupt for the last
+	 * list only.
+	 */
+	if (!dlm->singleshot || is_last)
+		dl->header->flags |= VSP1_DLH_INT_ENABLE;
+
+	/*
+	 * In continuous mode enable auto-start for all lists, as the VSP must
+	 * loop on the same list until a new one is queued. In singleshot mode
+	 * enable auto-start for all lists but the last to chain processing of
+	 * partitions without software intervention.
+	 */
+	if (!dlm->singleshot || !is_last)
+		dl->header->flags |= VSP1_DLH_AUTO_START;
+
+	if (!is_last) {
 		/*
-		 * If this display list's chain is not empty, we are on a list,
-		 * and the next item is the display list that we must queue for
-		 * automatic processing by the hardware.
+		 * If this is not the last display list in the chain, queue the
+		 * next item for automatic processing by the hardware.
 		 */
 		struct vsp1_dl_list *next = list_next_entry(dl, chain);
 
 		dl->header->next_header = next->dma;
-		dl->header->flags = VSP1_DLH_AUTO_START;
 	} else if (!dlm->singleshot) {
 		/*
 		 * if the display list manager works in continuous mode, the VSP
@@ -788,13 +806,6 @@ static void vsp1_dl_list_fill_header(struct vsp1_dl_list *dl, bool is_last)
 		 * instructed to do otherwise.
 		 */
 		dl->header->next_header = dl->dma;
-		dl->header->flags = VSP1_DLH_INT_ENABLE | VSP1_DLH_AUTO_START;
-	} else {
-		/*
-		 * Otherwise, in mem-to-mem mode, we work in single-shot mode
-		 * and the next display list must not be started automatically.
-		 */
-		dl->header->flags = VSP1_DLH_INT_ENABLE;
 	}
 
 	if (!dl->extension)
@@ -861,13 +872,15 @@ static void vsp1_dl_list_commit_continuous(struct vsp1_dl_list *dl)
 	 *
 	 * If a display list is already pending we simply drop it as the new
 	 * display list is assumed to contain a more recent configuration. It is
-	 * an error if the already pending list has the internal flag set, as
-	 * there is then a process waiting for that list to complete. This
-	 * shouldn't happen as the waiting process should perform proper
-	 * locking, but warn just in case.
+	 * an error if the already pending list has the
+	 * VSP1_DL_FRAME_END_INTERNAL flag set, as there is then a process
+	 * waiting for that list to complete. This shouldn't happen as the
+	 * waiting process should perform proper locking, but warn just in
+	 * case.
 	 */
 	if (vsp1_dl_list_hw_update_pending(dlm)) {
-		WARN_ON(dlm->pending && dlm->pending->internal);
+		WARN_ON(dlm->pending &&
+			(dlm->pending->flags & VSP1_DL_FRAME_END_INTERNAL));
 		__vsp1_dl_list_put(dlm->pending);
 		dlm->pending = dl;
 		return;
@@ -897,7 +910,7 @@ static void vsp1_dl_list_commit_singleshot(struct vsp1_dl_list *dl)
 	dlm->active = dl;
 }
 
-void vsp1_dl_list_commit(struct vsp1_dl_list *dl, bool internal)
+void vsp1_dl_list_commit(struct vsp1_dl_list *dl, unsigned int dl_flags)
 {
 	struct vsp1_dl_manager *dlm = dl->dlm;
 	struct vsp1_dl_list *dl_next;
@@ -912,7 +925,7 @@ void vsp1_dl_list_commit(struct vsp1_dl_list *dl, bool internal)
 		vsp1_dl_list_fill_header(dl_next, last);
 	}
 
-	dl->internal = internal;
+	dl->flags = dl_flags & ~VSP1_DL_FRAME_END_COMPLETED;
 
 	spin_lock_irqsave(&dlm->lock, flags);
 
@@ -941,9 +954,13 @@ void vsp1_dl_list_commit(struct vsp1_dl_list *dl, bool internal)
  * set in single-shot mode as display list processing is then not continuous and
  * races never occur.
  *
- * The VSP1_DL_FRAME_END_INTERNAL flag indicates that the previous display list
- * has completed and had been queued with the internal notification flag.
- * Internal notification is only supported for continuous mode.
+ * The following flags are only supported for continuous mode.
+ *
+ * The VSP1_DL_FRAME_END_INTERNAL flag indicates that the display list that just
+ * became active had been queued with the internal notification flag.
+ *
+ * The VSP1_DL_FRAME_END_WRITEBACK flag indicates that the previously active
+ * display list had been queued with the writeback flag.
  */
 unsigned int vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm)
 {
@@ -982,13 +999,24 @@ unsigned int vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm)
 		goto done;
 
 	/*
+	 * If the active display list has the writeback flag set, the frame
+	 * completion marks the end of the writeback capture. Return the
+	 * VSP1_DL_FRAME_END_WRITEBACK flag and reset the display list's
+	 * writeback flag.
+	 */
+	if (dlm->active && (dlm->active->flags & VSP1_DL_FRAME_END_WRITEBACK)) {
+		flags |= VSP1_DL_FRAME_END_WRITEBACK;
+		dlm->active->flags &= ~VSP1_DL_FRAME_END_WRITEBACK;
+	}
+
+	/*
 	 * The device starts processing the queued display list right after the
 	 * frame end interrupt. The display list thus becomes active.
 	 */
 	if (dlm->queued) {
-		if (dlm->queued->internal)
+		if (dlm->queued->flags & VSP1_DL_FRAME_END_INTERNAL)
 			flags |= VSP1_DL_FRAME_END_INTERNAL;
-		dlm->queued->internal = false;
+		dlm->queued->flags &= ~VSP1_DL_FRAME_END_INTERNAL;
 
 		__vsp1_dl_list_put(dlm->active);
 		dlm->active = dlm->queued;