diff options
author | Mauro Carvalho Chehab <mchehab@redhat.com> | 2012-06-14 16:35:57 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2012-08-13 23:30:06 -0300 |
commit | 25aee3debe0464f6c680173041fa3de30ec9ff54 (patch) | |
tree | e2b14f952a0831399f9cbb444cfb9c7980b6485b /drivers/media/pci/mantis | |
parent | 786baecfe78f8e25547c628b48a60fc8e5636056 (diff) |
[media] Rename media/dvb as media/pci
The remaining dvb drivers are pci, so rename them to match the
bus.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/pci/mantis')
44 files changed, 5358 insertions, 0 deletions
diff --git a/drivers/media/pci/mantis/Kconfig b/drivers/media/pci/mantis/Kconfig new file mode 100644 index 000000000000..a13a50503134 --- /dev/null +++ b/drivers/media/pci/mantis/Kconfig @@ -0,0 +1,38 @@ +config MANTIS_CORE + tristate "Mantis/Hopper PCI bridge based devices" + depends on PCI && I2C && INPUT && RC_CORE + + help + Support for PCI cards based on the Mantis and Hopper PCi bridge. + + Say Y if you own such a device and want to use it. + +config DVB_MANTIS + tristate "MANTIS based cards" + depends on MANTIS_CORE && DVB_CORE && PCI && I2C + select DVB_MB86A16 if !DVB_FE_CUSTOMISE + select DVB_ZL10353 if !DVB_FE_CUSTOMISE + select DVB_STV0299 if !DVB_FE_CUSTOMISE + select DVB_LNBP21 if !DVB_FE_CUSTOMISE + select DVB_STB0899 if !DVB_FE_CUSTOMISE + select DVB_STB6100 if !DVB_FE_CUSTOMISE + select DVB_TDA665x if !DVB_FE_CUSTOMISE + select DVB_TDA10021 if !DVB_FE_CUSTOMISE + select DVB_TDA10023 if !DVB_FE_CUSTOMISE + select DVB_PLL + help + Support for PCI cards based on the Mantis PCI bridge. + Say Y when you have a Mantis based DVB card and want to use it. + + If unsure say N. + +config DVB_HOPPER + tristate "HOPPER based cards" + depends on MANTIS_CORE && DVB_CORE && PCI && I2C + select DVB_ZL10353 if !DVB_FE_CUSTOMISE + select DVB_PLL + help + Support for PCI cards based on the Hopper PCI bridge. + Say Y when you have a Hopper based DVB card and want to use it. + + If unsure say N diff --git a/drivers/media/pci/mantis/Makefile b/drivers/media/pci/mantis/Makefile new file mode 100644 index 000000000000..f715051e4453 --- /dev/null +++ b/drivers/media/pci/mantis/Makefile @@ -0,0 +1,28 @@ +mantis_core-objs := mantis_ioc.o \ + mantis_uart.o \ + mantis_dma.o \ + mantis_pci.o \ + mantis_i2c.o \ + mantis_dvb.o \ + mantis_evm.o \ + mantis_hif.o \ + mantis_ca.o \ + mantis_pcmcia.o \ + mantis_input.o + +mantis-objs := mantis_cards.o \ + mantis_vp1033.o \ + mantis_vp1034.o \ + mantis_vp1041.o \ + mantis_vp2033.o \ + mantis_vp2040.o \ + mantis_vp3030.o + +hopper-objs := hopper_cards.o \ + hopper_vp3028.o + +obj-$(CONFIG_MANTIS_CORE) += mantis_core.o +obj-$(CONFIG_DVB_MANTIS) += mantis.o +obj-$(CONFIG_DVB_HOPPER) += hopper.o + +ccflags-y += -Idrivers/media/dvb-core/ -Idrivers/media/dvb-frontends/ diff --git a/drivers/media/pci/mantis/hopper_cards.c b/drivers/media/pci/mantis/hopper_cards.c new file mode 100644 index 000000000000..cc0251e01077 --- /dev/null +++ b/drivers/media/pci/mantis/hopper_cards.c @@ -0,0 +1,277 @@ +/* + Hopper PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <asm/irq.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "hopper_vp3028.h" +#include "mantis_dma.h" +#include "mantis_dvb.h" +#include "mantis_uart.h" +#include "mantis_ioc.h" +#include "mantis_pci.h" +#include "mantis_i2c.h" +#include "mantis_reg.h" + +static unsigned int verbose; +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "verbose startup messages, default is 0 (no)"); + +#define DRIVER_NAME "Hopper" + +static char *label[10] = { + "DMA", + "IRQ-0", + "IRQ-1", + "OCERR", + "PABRT", + "RIPRR", + "PPERR", + "FTRGT", + "RISCI", + "RACK" +}; + +static int devs; + +static irqreturn_t hopper_irq_handler(int irq, void *dev_id) +{ + u32 stat = 0, mask = 0; + u32 rst_stat = 0, rst_mask = 0; + + struct mantis_pci *mantis; + struct mantis_ca *ca; + + mantis = (struct mantis_pci *) dev_id; + if (unlikely(mantis == NULL)) { + dprintk(MANTIS_ERROR, 1, "Mantis == NULL"); + return IRQ_NONE; + } + ca = mantis->mantis_ca; + + stat = mmread(MANTIS_INT_STAT); + mask = mmread(MANTIS_INT_MASK); + if (!(stat & mask)) + return IRQ_NONE; + + rst_mask = MANTIS_GPIF_WRACK | + MANTIS_GPIF_OTHERR | + MANTIS_SBUF_WSTO | + MANTIS_GPIF_EXTIRQ; + + rst_stat = mmread(MANTIS_GPIF_STATUS); + rst_stat &= rst_mask; + mmwrite(rst_stat, MANTIS_GPIF_STATUS); + + mantis->mantis_int_stat = stat; + mantis->mantis_int_mask = mask; + dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask); + if (stat & MANTIS_INT_RISCEN) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]); + } + if (stat & MANTIS_INT_IRQ0) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]); + mantis->gpif_status = rst_stat; + wake_up(&ca->hif_write_wq); + schedule_work(&ca->hif_evm_work); + } + if (stat & MANTIS_INT_IRQ1) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]); + schedule_work(&mantis->uart_work); + } + if (stat & MANTIS_INT_OCERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]); + } + if (stat & MANTIS_INT_PABORT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]); + } + if (stat & MANTIS_INT_RIPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]); + } + if (stat & MANTIS_INT_PPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]); + } + if (stat & MANTIS_INT_FTRGT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]); + } + if (stat & MANTIS_INT_RISCI) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]); + mantis->busy_block = (stat & MANTIS_INT_RISCSTAT) >> 28; + tasklet_schedule(&mantis->tasklet); + } + if (stat & MANTIS_INT_I2CDONE) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]); + wake_up(&mantis->i2c_wq); + } + mmwrite(stat, MANTIS_INT_STAT); + stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE | + MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 | + MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 | + MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 | + MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 | + MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 | + MANTIS_INT_IRQ0 | MANTIS_INT_OCERR | + MANTIS_INT_PABORT | MANTIS_INT_RIPERR | + MANTIS_INT_PPERR | MANTIS_INT_FTRGT | + MANTIS_INT_RISCI); + + if (stat) + dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask); + + dprintk(MANTIS_DEBUG, 0, "\n"); + return IRQ_HANDLED; +} + +static int __devinit hopper_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) +{ + struct mantis_pci *mantis; + struct mantis_hwconfig *config; + int err = 0; + + mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL); + if (mantis == NULL) { + printk(KERN_ERR "%s ERROR: Out of memory\n", __func__); + err = -ENOMEM; + goto fail0; + } + + mantis->num = devs; + mantis->verbose = verbose; + mantis->pdev = pdev; + config = (struct mantis_hwconfig *) pci_id->driver_data; + config->irq_handler = &hopper_irq_handler; + mantis->hwconfig = config; + + err = mantis_pci_init(mantis); + if (err) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err); + goto fail1; + } + + err = mantis_stream_control(mantis, STREAM_TO_HIF); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err); + goto fail1; + } + + err = mantis_i2c_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err); + goto fail2; + } + + err = mantis_get_mac(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err); + goto fail2; + } + + err = mantis_dma_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err); + goto fail3; + } + + err = mantis_dvb_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err); + goto fail4; + } + devs++; + + return err; + +fail4: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err); + mantis_dma_exit(mantis); + +fail3: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err); + mantis_i2c_exit(mantis); + +fail2: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err); + mantis_pci_exit(mantis); + +fail1: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err); + kfree(mantis); + +fail0: + return err; +} + +static void __devexit hopper_pci_remove(struct pci_dev *pdev) +{ + struct mantis_pci *mantis = pci_get_drvdata(pdev); + + if (mantis) { + mantis_dvb_exit(mantis); + mantis_dma_exit(mantis); + mantis_i2c_exit(mantis); + mantis_pci_exit(mantis); + kfree(mantis); + } + return; + +} + +static struct pci_device_id hopper_pci_table[] = { + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3028_DVB_T, &vp3028_config), + { } +}; + +MODULE_DEVICE_TABLE(pci, hopper_pci_table); + +static struct pci_driver hopper_pci_driver = { + .name = DRIVER_NAME, + .id_table = hopper_pci_table, + .probe = hopper_pci_probe, + .remove = hopper_pci_remove, +}; + +static int __devinit hopper_init(void) +{ + return pci_register_driver(&hopper_pci_driver); +} + +static void __devexit hopper_exit(void) +{ + return pci_unregister_driver(&hopper_pci_driver); +} + +module_init(hopper_init); +module_exit(hopper_exit); + +MODULE_DESCRIPTION("HOPPER driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/mantis/hopper_vp3028.c b/drivers/media/pci/mantis/hopper_vp3028.c new file mode 100644 index 000000000000..68a29f8bdf73 --- /dev/null +++ b/drivers/media/pci/mantis/hopper_vp3028.c @@ -0,0 +1,88 @@ +/* + Hopper VP-3028 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "zl10353.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "hopper_vp3028.h" + +struct zl10353_config hopper_vp3028_config = { + .demod_address = 0x0f, +}; + +#define MANTIS_MODEL_NAME "VP-3028" +#define MANTIS_DEV_TYPE "DVB-T" + +static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + struct mantis_hwconfig *config = mantis->hwconfig; + int err = 0; + + mantis_gpio_set_bits(mantis, config->reset, 0); + msleep(100); + err = mantis_frontend_power(mantis, POWER_ON); + msleep(100); + mantis_gpio_set_bits(mantis, config->reset, 1); + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + msleep(250); + dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); + fe = dvb_attach(zl10353_attach, &hopper_vp3028_config, adapter); + + if (!fe) + return -1; + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp3028_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp3028_frontend_init, + .power = GPIF_A00, + .reset = GPIF_A03, +}; diff --git a/drivers/media/pci/mantis/hopper_vp3028.h b/drivers/media/pci/mantis/hopper_vp3028.h new file mode 100644 index 000000000000..57239498bc87 --- /dev/null +++ b/drivers/media/pci/mantis/hopper_vp3028.h @@ -0,0 +1,30 @@ +/* + Hopper VP-3028 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP3028_H +#define __MANTIS_VP3028_H + +#include "mantis_common.h" + +#define MANTIS_VP_3028_DVB_T 0x0028 + +extern struct mantis_hwconfig vp3028_config; + +#endif /* __MANTIS_VP3028_H */ diff --git a/drivers/media/pci/mantis/mantis_ca.c b/drivers/media/pci/mantis/mantis_ca.c new file mode 100644 index 000000000000..3d7046909009 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_ca.c @@ -0,0 +1,209 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <asm/io.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_link.h" +#include "mantis_hif.h" +#include "mantis_reg.h" + +#include "mantis_ca.h" + +static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot); + + if (slot != 0) + return -EINVAL; + + return mantis_hif_read_mem(ca, addr); +} + +static int mantis_ca_write_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr, u8 data) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot); + + if (slot != 0) + return -EINVAL; + + return mantis_hif_write_mem(ca, addr, data); +} + +static int mantis_ca_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot); + + if (slot != 0) + return -EINVAL; + + return mantis_hif_read_iom(ca, addr); +} + +static int mantis_ca_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr, u8 data) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot); + + if (slot != 0) + return -EINVAL; + + return mantis_hif_write_iom(ca, addr, data); +} + +static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot); + udelay(500); /* Wait.. */ + mmwrite(0xda, MANTIS_PCMCIA_RESET); /* Leading edge assert */ + udelay(500); + mmwrite(0x00, MANTIS_PCMCIA_RESET); /* Trailing edge deassert */ + msleep(1000); + dvb_ca_en50221_camready_irq(&ca->en50221, 0); + + return 0; +} + +static int mantis_ca_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot); + + return 0; +} + +static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot); +/* mantis_set_direction(mantis, 1); */ /* Enable TS through CAM */ + + return 0; +} + +static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot); + + if (ca->slot_state == MODULE_INSERTED) { + dprintk(MANTIS_DEBUG, 1, "CA Module present and ready"); + return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; + } else { + dprintk(MANTIS_DEBUG, 1, "CA Module not present or not ready"); + } + + return 0; +} + +int mantis_ca_init(struct mantis_pci *mantis) +{ + struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter; + struct mantis_ca *ca; + int ca_flags = 0, result; + + dprintk(MANTIS_DEBUG, 1, "Initializing Mantis CA"); + ca = kzalloc(sizeof(struct mantis_ca), GFP_KERNEL); + if (!ca) { + dprintk(MANTIS_ERROR, 1, "Out of memory!, exiting .."); + result = -ENOMEM; + goto err; + } + + ca->ca_priv = mantis; + mantis->mantis_ca = ca; + ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE; + /* register CA interface */ + ca->en50221.owner = THIS_MODULE; + ca->en50221.read_attribute_mem = mantis_ca_read_attr_mem; + ca->en50221.write_attribute_mem = mantis_ca_write_attr_mem; + ca->en50221.read_cam_control = mantis_ca_read_cam_ctl; + ca->en50221.write_cam_control = mantis_ca_write_cam_ctl; + ca->en50221.slot_reset = mantis_ca_slot_reset; + ca->en50221.slot_shutdown = mantis_ca_slot_shutdown; + ca->en50221.slot_ts_enable = mantis_ts_control; + ca->en50221.poll_slot_status = mantis_slot_status; + ca->en50221.data = ca; + + mutex_init(&ca->ca_lock); + + init_waitqueue_head(&ca->hif_data_wq); + init_waitqueue_head(&ca->hif_opdone_wq); + init_waitqueue_head(&ca->hif_write_wq); + + dprintk(MANTIS_ERROR, 1, "Registering EN50221 device"); + result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1); + if (result != 0) { + dprintk(MANTIS_ERROR, 1, "EN50221: Initialization failed <%d>", result); + goto err; + } + dprintk(MANTIS_ERROR, 1, "Registered EN50221 device"); + mantis_evmgr_init(ca); + return 0; +err: + kfree(ca); + return result; +} +EXPORT_SYMBOL_GPL(mantis_ca_init); + +void mantis_ca_exit(struct mantis_pci *mantis) +{ + struct mantis_ca *ca = mantis->mantis_ca; + + dprintk(MANTIS_DEBUG, 1, "Mantis CA exit"); + + mantis_evmgr_exit(ca); + dprintk(MANTIS_ERROR, 1, "Unregistering EN50221 device"); + if (ca) + dvb_ca_en50221_release(&ca->en50221); + + kfree(ca); +} +EXPORT_SYMBOL_GPL(mantis_ca_exit); diff --git a/drivers/media/pci/mantis/mantis_ca.h b/drivers/media/pci/mantis/mantis_ca.h new file mode 100644 index 000000000000..dc63e55f7eca --- /dev/null +++ b/drivers/media/pci/mantis/mantis_ca.h @@ -0,0 +1,27 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_CA_H +#define __MANTIS_CA_H + +extern int mantis_ca_init(struct mantis_pci *mantis); +extern void mantis_ca_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_CA_H */ diff --git a/drivers/media/pci/mantis/mantis_cards.c b/drivers/media/pci/mantis/mantis_cards.c new file mode 100644 index 000000000000..0207d1f064e0 --- /dev/null +++ b/drivers/media/pci/mantis/mantis_cards.c @@ -0,0 +1,307 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> |