isdn: remove hisax driver

With the decline of ISDN, this seems to have become almost completely
obsolete, and even in the past years before that, almost all remaining
users appear to have used mISDN instead.

Birger Harzenetter noted that he is still using i4l/hisax to take
advantage of the 'divert' driver for call diversion, but otherwise uses
mISDN on the same hardware. This is a rare edge case as far as I
can tell, but we are still breaking an actively used work flow
(see https://xkcd.com/1172/).

We debated moving i4l/hisax to staging as an intermediate step, but as
he is not likely to change the setup, and that would just delay breaking
this use case.  The alternatives here are to stay on stable kernels
< 5.2, to create an external driver repository for isdn4linux, or to
add divert functionality to mISDN.

Cc: Birger Harzenetter <WIMPy@yeti.dk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 873 deletions

diff --git a/drivers/isdn/hisax/sedlbauer.c b/drivers/isdn/hisax/sedlbauer.c
deleted file mode 100644
index c0b97b893495..000000000000
--- a/drivers/isdn/hisax/sedlbauer.c
+++ /dev/null
@@ -1,873 +0,0 @@
-/* $Id: sedlbauer.c,v 1.34.2.6 2004/01/24 20:47:24 keil Exp $
- *
- * low level stuff for Sedlbauer cards
- * includes support for the Sedlbauer speed star (speed star II),
- * support for the Sedlbauer speed fax+,
- * support for the Sedlbauer ISDN-Controller PC/104 and
- * support for the Sedlbauer speed pci
- * derived from the original file asuscom.c from Karsten Keil
- *
- * Author       Marcus Niemann
- * Copyright    by Marcus Niemann    <niemann@www-bib.fh-bielefeld.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * Thanks to  Karsten Keil
- *            Sedlbauer AG for informations
- *            Edgar Toernig
- *
- */
-
-/* Supported cards:
- * Card:	Chip:		Configuration:	Comment:
- * ---------------------------------------------------------------------
- * Speed Card	ISAC_HSCX	DIP-SWITCH
- * Speed Win	ISAC_HSCX	ISAPNP
- * Speed Fax+	ISAC_ISAR	ISAPNP		Full analog support
- * Speed Star	ISAC_HSCX	CARDMGR
- * Speed Win2	IPAC		ISAPNP
- * ISDN PC/104	IPAC		DIP-SWITCH
- * Speed Star2	IPAC		CARDMGR
- * Speed PCI	IPAC		PCI PNP
- * Speed Fax+	ISAC_ISAR	PCI PNP		Full analog support
- *
- * Important:
- * For the sedlbauer speed fax+ to work properly you have to download
- * the firmware onto the card.
- * For example: hisaxctrl <DriverID> 9 ISAR.BIN
- */
-
-#include <linux/init.h>
-#include "hisax.h"
-#include "isac.h"
-#include "ipac.h"
-#include "hscx.h"
-#include "isar.h"
-#include "isdnl1.h"
-#include <linux/pci.h>
-#include <linux/isapnp.h>
-
-static const char *Sedlbauer_revision = "$Revision: 1.34.2.6 $";
-
-static const char *Sedlbauer_Types[] =
-{"None", "speed card/win", "speed star", "speed fax+",
- "speed win II / ISDN PC/104", "speed star II", "speed pci",
- "speed fax+ pyramid", "speed fax+ pci", "HST Saphir III"};
-
-#define PCI_SUBVENDOR_SPEEDFAX_PYRAMID	0x51
-#define PCI_SUBVENDOR_HST_SAPHIR3	0x52
-#define PCI_SUBVENDOR_SEDLBAUER_PCI	0x53
-#define PCI_SUBVENDOR_SPEEDFAX_PCI	0x54
-#define PCI_SUB_ID_SEDLBAUER		0x01
-
-#define SEDL_SPEED_CARD_WIN	1
-#define SEDL_SPEED_STAR		2
-#define SEDL_SPEED_FAX		3
-#define SEDL_SPEED_WIN2_PC104	4
-#define SEDL_SPEED_STAR2	5
-#define SEDL_SPEED_PCI		6
-#define SEDL_SPEEDFAX_PYRAMID	7
-#define SEDL_SPEEDFAX_PCI	8
-#define HST_SAPHIR3		9
-
-#define SEDL_CHIP_TEST		0
-#define SEDL_CHIP_ISAC_HSCX	1
-#define SEDL_CHIP_ISAC_ISAR	2
-#define SEDL_CHIP_IPAC		3
-
-#define SEDL_BUS_ISA		1
-#define SEDL_BUS_PCI		2
-#define	SEDL_BUS_PCMCIA		3
-
-#define byteout(addr, val) outb(val, addr)
-#define bytein(addr) inb(addr)
-
-#define SEDL_HSCX_ISA_RESET_ON	0
-#define SEDL_HSCX_ISA_RESET_OFF	1
-#define SEDL_HSCX_ISA_ISAC	2
-#define SEDL_HSCX_ISA_HSCX	3
-#define SEDL_HSCX_ISA_ADR	4
-
-#define SEDL_HSCX_PCMCIA_RESET	0
-#define SEDL_HSCX_PCMCIA_ISAC	1
-#define SEDL_HSCX_PCMCIA_HSCX	2
-#define SEDL_HSCX_PCMCIA_ADR	4
-
-#define SEDL_ISAR_ISA_ISAC		4
-#define SEDL_ISAR_ISA_ISAR		6
-#define SEDL_ISAR_ISA_ADR		8
-#define SEDL_ISAR_ISA_ISAR_RESET_ON	10
-#define SEDL_ISAR_ISA_ISAR_RESET_OFF	12
-
-#define SEDL_IPAC_ANY_ADR		0
-#define SEDL_IPAC_ANY_IPAC		2
-
-#define SEDL_IPAC_PCI_BASE		0
-#define SEDL_IPAC_PCI_ADR		0xc0
-#define SEDL_IPAC_PCI_IPAC		0xc8
-#define SEDL_ISAR_PCI_ADR		0xc8
-#define SEDL_ISAR_PCI_ISAC		0xd0
-#define SEDL_ISAR_PCI_ISAR		0xe0
-#define SEDL_ISAR_PCI_ISAR_RESET_ON	0x01
-#define SEDL_ISAR_PCI_ISAR_RESET_OFF	0x18
-#define SEDL_ISAR_PCI_LED1		0x08
-#define SEDL_ISAR_PCI_LED2		0x10
-
-#define SEDL_RESET      0x3	/* same as DOS driver */
-
-static inline u_char
-readreg(unsigned int ale, unsigned int adr, u_char off)
-{
-	register u_char ret;
-
-	byteout(ale, off);
-	ret = bytein(adr);
-	return (ret);
-}
-
-static inline void
-readfifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
-{
-	byteout(ale, off);
-	insb(adr, data, size);
-}
-
-
-static inline void
-writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
-{
-	byteout(ale, off);
-	byteout(adr, data);
-}
-
-static inline void
-writefifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
-{
-	byteout(ale, off);
-	outsb(adr, data, size);
-}
-
-/* Interface functions */
-
-static u_char
-ReadISAC(struct IsdnCardState *cs, u_char offset)
-{
-	return (readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset));
-}
-
-static void
-WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
-{
-	writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset, value);
-}
-
-static void
-ReadISACfifo(struct IsdnCardState *cs, u_char *data, int size)
-{
-	readfifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0, data, size);
-}
-
-static void
-WriteISACfifo(struct IsdnCardState *cs, u_char *data, int size)
-{
-	writefifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0, data, size);
-}
-
-static u_char
-ReadISAC_IPAC(struct IsdnCardState *cs, u_char offset)
-{
-	return (readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset | 0x80));
-}
-
-static void
-WriteISAC_IPAC(struct IsdnCardState *cs, u_char offset, u_char value)
-{
-	writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset | 0x80, value);
-}
-
-static void
-ReadISACfifo_IPAC(struct IsdnCardState *cs, u_char *data, int size)
-{
-	readfifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0x80, data, size);
-}
-
-static void
-WriteISACfifo_IPAC(struct IsdnCardState *cs, u_char *data, int size)
-{
-	writefifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0x80, data, size);
-}
-
-static u_char
-ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
-{
-	return (readreg(cs->hw.sedl.adr,
-			cs->hw.sedl.hscx, offset + (hscx ? 0x40 : 0)));
-}
-
-static void
-WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
-{
-	writereg(cs->hw.sedl.adr,
-		 cs->hw.sedl.hscx, offset + (hscx ? 0x40 : 0), value);
-}
-
-/* ISAR access routines
- * mode = 0 access with IRQ on
- * mode = 1 access with IRQ off
- * mode = 2 access with IRQ off and using last offset
- */
-
-static u_char
-ReadISAR(struct IsdnCardState *cs, int mode, u_char offset)
-{
-	if (mode == 0)
-		return (readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, offset));
-	else if (mode == 1)
-		byteout(cs->hw.sedl.adr, offset);
-	return (bytein(cs->hw.sedl.hscx));
-}
-
-static void
-WriteISAR(struct IsdnCardState *cs, int mode, u_char offset, u_char value)
-{
-	if (mode == 0)
-		writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, offset, value);
-	else {
-		if (mode == 1)
-			byteout(cs->hw.sedl.adr, offset);
-		byteout(cs->hw.sedl.hscx, value);
-	}
-}
-
-/*
- * fast interrupt HSCX stuff goes here
- */
-
-#define READHSCX(cs, nr, reg) readreg(cs->hw.sedl.adr,			\
-				      cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0))
-#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.sedl.adr,		\
-					      cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0), data)
-
-#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.sedl.adr,	\
-						cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
-
-#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.sedl.adr,	\
-						  cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
-
-#include "hscx_irq.c"
-
-static irqreturn_t
-sedlbauer_interrupt(int intno, void *dev_id)
-{
-	struct IsdnCardState *cs = dev_id;
-	u_char val;
-	u_long flags;
-
-	spin_lock_irqsave(&cs->lock, flags);
-	if ((cs->hw.sedl.bus == SEDL_BUS_PCMCIA) && (*cs->busy_flag == 1)) {
-		/* The card tends to generate interrupts while being removed
-		   causing us to just crash the kernel. bad. */
-		spin_unlock_irqrestore(&cs->lock, flags);
-		printk(KERN_WARNING "Sedlbauer: card not available!\n");
-		return IRQ_NONE;
-	}
-
-	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
-Start_HSCX:
-	if (val)
-		hscx_int_main(cs, val);
-	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
-Start_ISAC:
-	if (val)
-		isac_interrupt(cs, val);
-	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
-	if (val) {
-		if (cs->debug & L1_DEB_HSCX)
-			debugl1(cs, "HSCX IntStat after IntRoutine");
-		goto Start_HSCX;
-	}
-	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
-	if (val) {
-		if (cs->debug & L1_DEB_ISAC)
-			debugl1(cs, "ISAC IntStat after IntRoutine");
-		goto Start_ISAC;
-	}
-	writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_MASK, 0xFF);
-	writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_MASK + 0x40, 0xFF);
-	writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_MASK, 0xFF);
-	writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_MASK, 0x0);
-	writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_MASK, 0x0);
-	writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_MASK + 0x40, 0x0);
-	spin_unlock_irqrestore(&cs->lock, flags);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t
-sedlbauer_interrupt_ipac(int intno, void *dev_id)
-{
-	struct IsdnCardState *cs = dev_id;
-	u_char ista, val, icnt = 5;
-	u_long flags;
-
-	spin_lock_irqsave(&cs->lock, flags);
-	ista = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ISTA);
-Start_IPAC:
-	if (cs->debug & L1_DEB_IPAC)
-		debugl1(cs, "IPAC ISTA %02X", ista);
-	if (ista & 0x0f) {
-		val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
-		if (ista & 0x01)
-			val |= 0x01;
-		if (ista & 0x04)
-			val |= 0x02;
-		if (ista & 0x08)
-			val |= 0x04;
-		if (val)
-			hscx_int_main(cs, val);
-	}
-	if (ista & 0x20) {
-		val = 0xfe & readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA | 0x80);
-		if (val) {
-			isac_interrupt(cs, val);
-		}
-	}
-	if (ista & 0x10) {
-		val = 0x01;
-		isac_interrupt(cs, val);
-	}
-	ista  = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ISTA);
-	if ((ista & 0x3f) && icnt) {
-		icnt--;
-		goto Start_IPAC;
-	}
-	if (!icnt)
-		if (cs->debug & L1_DEB_ISAC)
-			debugl1(cs, "Sedlbauer IRQ LOOP");
-	writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_MASK, 0xFF);
-	writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_MASK, 0xC0);
-	spin_unlock_irqrestore(&cs->lock, flags);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t
-sedlbauer_interrupt_isar(int intno, void *dev_id)
-{
-	struct IsdnCardState *cs = dev_id;
-	u_char val;
-	int cnt = 5;
-	u_long flags;
-
-	spin_lock_irqsave(&cs->lock, flags);
-	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT);
-Start_ISAR:
-	if (val & ISAR_IRQSTA)
-		isar_int_main(cs);
-	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
-Start_ISAC:
-	if (val)
-		isac_interrupt(cs, val);
-	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT);
-	if ((val & ISAR_IRQSTA) && --cnt) {
-		if (cs->debug & L1_DEB_HSCX)
-			debugl1(cs, "ISAR IntStat after IntRoutine");
-		goto Start_ISAR;
-	}
-	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
-	if (val && --cnt) {
-		if (cs->debug & L1_DEB_ISAC)
-			debugl1(cs, "ISAC IntStat after IntRoutine");
-		goto Start_ISAC;
-	}
-	if (!cnt)
-		if (cs->debug & L1_DEB_ISAC)
-			debugl1(cs, "Sedlbauer IRQ LOOP");
-
-	writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT, 0);
-	writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_MASK, 0xFF);
-	writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_MASK, 0x0);
-	writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT, ISAR_IRQMSK);
-	spin_unlock_irqrestore(&cs->lock, flags);
-	return IRQ_HANDLED;
-}
-
-static void
-release_io_sedlbauer(struct IsdnCardState *cs)
-{
-	int bytecnt = 8;
-
-	if (cs->subtyp == SEDL_SPEED_FAX) {
-		bytecnt = 16;
-	} else if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
-		bytecnt = 256;
-	}
-	if (cs->hw.sedl.cfg_reg)
-		release_region(cs->hw.sedl.cfg_reg, bytecnt);
-}
-
-static void
-reset_sedlbauer(struct IsdnCardState *cs)
-{
-	printk(KERN_INFO "Sedlbauer: resetting card\n");
-
-	if (!((cs->hw.sedl.bus == SEDL_BUS_PCMCIA) &&
-	      (cs->hw.sedl.chip == SEDL_CHIP_ISAC_HSCX))) {
-		if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
-			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_POTA2, 0x20);
-			mdelay(2);
-			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_POTA2, 0x0);
-			mdelay(10);
-			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_CONF, 0x0);
-			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ACFG, 0xff);
-			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_AOE, 0x0);
-			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_MASK, 0xc0);
-			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_PCFG, 0x12);
-		} else if ((cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) &&
-			   (cs->hw.sedl.bus == SEDL_BUS_PCI)) {
-			byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_on);
-			mdelay(2);
-			byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_off);
-			mdelay(10);
-		} else {
-			byteout(cs->hw.sedl.reset_on, SEDL_RESET);	/* Reset On */
-			mdelay(2);
-			byteout(cs->hw.sedl.reset_off, 0);	/* Reset Off */
-			mdelay(10);
-		}
-	}
-}
-
-static int
-Sedl_card_msg(struct IsdnCardState *cs, int mt, void *arg)
-{
-	u_long flags;
-
-	switch (mt) {
-	case CARD_RESET:
-		spin_lock_irqsave(&cs->lock, flags);
-		reset_sedlbauer(cs);
-		spin_unlock_irqrestore(&cs->lock, flags);
-		return (0);
-	case CARD_RELEASE:
-		if (cs->hw.sedl.bus == SEDL_BUS_PCI)
-			/* disable all IRQ */
-			byteout(cs->hw.sedl.cfg_reg + 5, 0);
-		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
-			spin_lock_irqsave(&cs->lock, flags);
-			writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
-				 ISAR_IRQBIT, 0);
-			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
-				 ISAC_MASK, 0xFF);
-			reset_sedlbauer(cs);
-			writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
-				 ISAR_IRQBIT, 0);
-			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
-				 ISAC_MASK, 0xFF);
-			spin_unlock_irqrestore(&cs->lock, flags);
-		}
-		release_io_sedlbauer(cs);
-		return (0);
-	case CARD_INIT:
-		spin_lock_irqsave(&cs->lock, flags);
-		if (cs->hw.sedl.bus == SEDL_BUS_PCI)
-			/* enable all IRQ */
-			byteout(cs->hw.sedl.cfg_reg + 5, 0x02);
-		reset_sedlbauer(cs);
-		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
-			clear_pending_isac_ints(cs);
-			writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
-				 ISAR_IRQBIT, 0);
-			initisac(cs);
-			initisar(cs);
-			/* Reenable all IRQ */
-			cs->writeisac(cs, ISAC_MASK, 0);
-			/* RESET Receiver and Transmitter */
-			cs->writeisac(cs, ISAC_CMDR, 0x41);
-		} else {
-			inithscxisac(cs, 3);
-		}
-		spin_unlock_irqrestore(&cs->lock, flags);
-		return (0);
-	case CARD_TEST:
-		return (0);
-	case MDL_INFO_CONN:
-		if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
-			return (0);
-		spin_lock_irqsave(&cs->lock, flags);
-		if ((long) arg)
-			cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED2;
-		else
-			cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED1;
-		byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_off);
-		spin_unlock_irqrestore(&cs->lock, flags);
-		break;
-	case MDL_INFO_REL:
-		if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
-			return (0);
-		spin_lock_irqsave(&cs->lock, flags);
-		if ((long) arg)
-			cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED2;
-		else
-			cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED1;
-		byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_off);
-		spin_unlock_irqrestore(&cs->lock, flags);
-		break;
-	}
-	return (0);
-}
-
-#ifdef __ISAPNP__
-static struct isapnp_device_id sedl_ids[] = {
-	{ ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01),
-	  ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01),
-	  (unsigned long) "Speed win" },
-	{ ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02),
-	  ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02),
-	  (unsigned long) "Speed Fax+" },
-	{ 0, }
-};
-
-static struct isapnp_device_id *ipid = &sedl_ids[0];
-static struct pnp_card *pnp_c = NULL;
-
-static int setup_sedlbauer_isapnp(struct IsdnCard *card, int *bytecnt)
-{
-	struct IsdnCardState *cs = card->cs;
-	struct pnp_dev *pnp_d;
-
-	if (!isapnp_present())
-		return -1;
-
-	while (ipid->card_vendor) {
-		if ((pnp_c = pnp_find_card(ipid->card_vendor,
-					   ipid->card_device, pnp_c))) {
-			pnp_d = NULL;
-			if ((pnp_d = pnp_find_dev(pnp_c,
-						  ipid->vendor, ipid->function, pnp_d))) {
-				int err;
-
-				printk(KERN_INFO "HiSax: %s detected\n",
-				       (char *)ipid->driver_data);
-				pnp_disable_dev(pnp_d);
-				err = pnp_activate_dev(pnp_d);
-				if (err < 0) {
-					printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
-					       __func__, err);
-					return (0);
-				}
-				card->para[1] = pnp_port_start(pnp_d, 0);
-				card->para[0] = pnp_irq(pnp_d, 0);
-
-				if (card->para[0] == -1 || !card->para[1]) {
-					printk(KERN_ERR "Sedlbauer PnP:some resources are missing %ld/%lx\n",
-					       card->para[0], card->para[1]);
-					pnp_disable_dev(pnp_d);
-					return (0);
-				}
-				cs->hw.sedl.cfg_reg = card->para[1];
-				cs->irq = card->para[0];
-				if (ipid->function == ISAPNP_FUNCTION(0x2)) {
-					cs->subtyp = SEDL_SPEED_FAX;
-					cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
-					*bytecnt = 16;
-				} else {
-					cs->subtyp = SEDL_SPEED_CARD_WIN;
-					cs->hw.sedl.chip = SEDL_CHIP_TEST;
-				}
-
-				return (1);
-			} else {
-				printk(KERN_ERR "Sedlbauer PnP: PnP error card found, no device\n");
-				return (0);
-			}
-		}
-		ipid++;
-		pnp_c = NULL;
-	}
-
-	printk(KERN_INFO "Sedlbauer PnP: no ISAPnP card found\n");
-	return -1;
-}
-#else
-
-static int setup_sedlbauer_isapnp(struct IsdnCard *card, int *bytecnt)
-{
-	return -1;
-}
-#endif /* __ISAPNP__ */
-
-#ifdef CONFIG_PCI
-static struct pci_dev *dev_sedl = NULL;
-
-static int setup_sedlbauer_pci(struct IsdnCard *card)
-{
-	struct IsdnCardState *cs = card->cs;
-	u16 sub_vendor_id, sub_id;
-
-	if ((dev_sedl = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
-					      PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) {
-		if (pci_enable_device(dev_sedl))
-			return (0);
-		cs->irq = dev_sedl->irq;
-		if (!cs->irq) {
-			printk(KERN_WARNING "Sedlbauer: No IRQ for PCI card found\n");
-			return (0);
-		}
-		cs->hw.sedl.cfg_reg = pci_resource_start(dev_sedl, 0);
-	} else {
-		printk(KERN_WARNING "Sedlbauer: No PCI card found\n");
-		return (0);
-	}
-	cs->irq_flags |= IRQF_SHARED;
-	cs->hw.sedl.bus = SEDL_BUS_PCI;
-	sub_vendor_id = dev_sedl->subsystem_vendor;
-	sub_id = dev_sedl->subsystem_device;
-	printk(KERN_INFO "Sedlbauer: PCI subvendor:%x subid %x\n",
-	       sub_vendor_id, sub_id);
-	printk(KERN_INFO "Sedlbauer: PCI base adr %#x\n",
-	       cs->hw.sedl.cfg_reg);
-	if (sub_id != PCI_SUB_ID_SEDLBAUER) {
-		printk(KERN_ERR "Sedlbauer: unknown sub id %#x\n", sub_id);
-		return (0);
-	}
-	if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PYRAMID) {
-		cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
-		cs->subtyp = SEDL_SPEEDFAX_PYRAMID;
-	} else if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PCI) {
-		cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
-		cs->subtyp = SEDL_SPEEDFAX_PCI;
-	} else if (sub_vendor_id == PCI_SUBVENDOR_HST_SAPHIR3) {
-		cs->hw.sedl.chip = SEDL_CHIP_IPAC;
-		cs->subtyp = HST_SAPHIR3;
-	} else if (sub_vendor_id == PCI_SUBVENDOR_SEDLBAUER_PCI) {
-		cs->hw.sedl.chip = SEDL_CHIP_IPAC;
-		cs->subtyp = SEDL_SPEED_PCI;
-	} else {
-		printk(KERN_ERR "Sedlbauer: unknown sub vendor id %#x\n",
-		       sub_vendor_id);
-		return (0);
-	}
-
-	cs->hw.sedl.reset_on = SEDL_ISAR_PCI_ISAR_RESET_ON;
-	cs->hw.sedl.reset_off = SEDL_ISAR_PCI_ISAR_RESET_OFF;
-	byteout(cs->hw.sedl.cfg_reg, 0xff);
-	byteout(cs->hw.sedl.cfg_reg, 0x00);
-	byteout(cs->hw.sedl.cfg_reg + 2, 0xdd);
-	byteout(cs->hw.sedl.cfg_reg + 5, 0); /* disable all IRQ */
-	byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_on);
-	mdelay(2);
-	byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_off);
-	mdelay(10);
-
-	return (1);
-}
-
-#else
-
-static int setup_sedlbauer_pci(struct IsdnCard *card)
-{
-	return (1);
-}
-
-#endif /* CONFIG_PCI */
-
-int setup_sedlbauer(struct IsdnCard *card)
-{
-	int bytecnt = 8, ver, val, rc;
-	struct IsdnCardState *cs = card->cs;
-	char tmp[64];
-
-	strcpy(tmp, Sedlbauer_revision);
-	printk(KERN_INFO "HiSax: Sedlbauer driver Rev. %s\n", HiSax_getrev(tmp));
-
-	if (cs->typ == ISDN_CTYPE_SEDLBAUER) {
-		cs->subtyp = SEDL_SPEED_CARD_WIN;
-		cs->hw.sedl.bus = SEDL_BUS_ISA;
-		cs->hw.sedl.chip = SEDL_CHIP_TEST;
-	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_PCMCIA) {
-		cs->subtyp = SEDL_SPEED_STAR;
-		cs->hw.sedl.bus = SEDL_BUS_PCMCIA;
-		cs->hw.sedl.chip = SEDL_CHIP_TEST;
-	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_FAX) {
-		cs->subtyp = SEDL_SPEED_FAX;
-		cs->hw.sedl.bus = SEDL_BUS_ISA;
-		cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
-	} else
-		return (0);
-
-	bytecnt = 8;
-	if (card->para[1]) {
-		cs->hw.sedl.cfg_reg = card->para[1];
-		cs->irq = card->para[0];
-		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
-			bytecnt = 16;
-		}
-	} else {
-		rc = setup_sedlbauer_isapnp(card, &bytecnt);
-		if (!rc)
-			return (0);
-		if (rc > 0)
-			goto ready;
-
-		/* Probe for Sedlbauer speed pci */
-		rc = setup_sedlbauer_pci(card);
-		if (!rc)
-			return (0);
-
-		bytecnt = 256;
-	}
-
-ready:
-
-	/* In case of the sedlbauer pcmcia card, this region is in use,
-	 * reserved for us by the card manager. So we do not check it
-	 * here, it would fail.
-	 */
-	if (cs->hw.sedl.bus != SEDL_BUS_PCMCIA &&
-	    !request_region(cs->hw.sedl.cfg_reg, bytecnt, "sedlbauer isdn")) {
-		printk(KERN_WARNING
-		       "HiSax: %s config port %x-%x already in use\n",
-		       CardType[card->typ],
-		       cs->hw.sedl.cfg_reg,
-		       cs->hw.sedl.cfg_reg + bytecnt);
-		return (0);
-	}
-
-	printk(KERN_INFO
-	       "Sedlbauer: defined at 0x%x-0x%x IRQ %d\n",
-	       cs->hw.sedl.cfg_reg,
-	       cs->hw.sedl.cfg_reg + bytecnt,
-	       cs->irq);
-
-	cs->BC_Read_Reg = &ReadHSCX;
-	cs->BC_Write_Reg = &WriteHSCX;
-	cs->BC_Send_Data = &hscx_fill_fifo;
-	cs->cardmsg = &Sedl_card_msg;
-
-/*
- * testing ISA and PCMCIA Cards for IPAC, default is ISAC
- * do not test for PCI card, because ports are different
- * and PCI card uses only IPAC (for the moment)
- */
-	if (cs->hw.sedl.bus != SEDL_BUS_PCI) {
-		val = readreg(cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR,
-			      cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC, IPAC_ID);
-		printk(KERN_DEBUG "Sedlbauer: testing IPAC version %x\n", val);
-		if ((val == 1) || (val == 2)) {
-			/* IPAC */
-			cs->subtyp = SEDL_SPEED_WIN2_PC104;
-			if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
-				cs->subtyp = SEDL_SPEED_STAR2;
-			}
-			cs->hw.sedl.chip = SEDL_CHIP_IPAC;
-		} else {
-			/* ISAC_HSCX oder ISAC_ISAR */
-			if (cs->hw.sedl.chip == SEDL_CHIP_TEST) {
-				cs->hw.sedl.chip = SEDL_CHIP_ISAC_HSCX;
-			}
-		}
-	}
-
-/*
- * hw.sedl.chip is now properly set
- */
-	printk(KERN_INFO "Sedlbauer: %s detected\n",
-	       Sedlbauer_Types[cs->subtyp]);
-
-	setup_isac(cs);
-	if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
-		if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
-			cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_ADR;
-			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
-			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
-		} else {
-			cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR;
-			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
-			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
-		}
-		test_and_set_bit(HW_IPAC, &cs->HW_Flags);
-		cs->readisac = &ReadISAC_IPAC;
-		cs->writeisac = &WriteISAC_IPAC;
-		cs->readisacfifo = &ReadISACfifo_IPAC;
-		cs->writeisacfifo = &WriteISACfifo_IPAC;
-		cs->irq_func = &sedlbauer_interrupt_ipac;
-		val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ID);
-		printk(KERN_INFO "Sedlbauer: IPAC version %x\n", val);
-	} else {
-		/* ISAC_HSCX oder ISAC_ISAR */
-		cs->readisac = &ReadISAC;
-		cs->writeisac = &WriteISAC;
-		cs->readisacfifo = &ReadISACfifo;
-		cs->writeisacfifo = &WriteISACfifo;
-		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
-			if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
-				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
-					SEDL_ISAR_PCI_ADR;
-				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
-					SEDL_ISAR_PCI_ISAC;
-				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
-					SEDL_ISAR_PCI_ISAR;
-			} else {
-				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
-					SEDL_ISAR_ISA_ADR;
-				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
-					SEDL_ISAR_ISA_ISAC;
-				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
-					SEDL_ISAR_ISA_ISAR;
-				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg +
-					SEDL_ISAR_ISA_ISAR_RESET_ON;
-				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg +
-					SEDL_ISAR_ISA_ISAR_RESET_OFF;
-			}
-			cs->bcs[0].hw.isar.reg = &cs->hw.sedl.isar;
-			cs->bcs[1].hw.isar.reg = &cs->hw.sedl.isar;
-			test_and_set_bit(HW_ISAR, &cs->HW_Flags);
-			cs->irq_func = &sedlbauer_interrupt_isar;
-			cs->auxcmd = &isar_auxcmd;
-			ISACVersion(cs, "Sedlbauer:");
-			cs->BC_Read_Reg = &ReadISAR;
-			cs->BC_Write_Reg = &WriteISAR;
-			cs->BC_Send_Data = &isar_fill_fifo;
-			bytecnt = 3;
-			while (bytecnt) {
-				ver = ISARVersion(cs, "Sedlbauer:");
-				if (ver < 0)
-					printk(KERN_WARNING
-					       "Sedlbauer: wrong ISAR version (ret = %d)\n", ver);
-				else
-					break;
-				reset_sedlbauer(cs);
-				bytecnt--;
-			}
-			if (!bytecnt) {
-				release_io_sedlbauer(cs);
-				return (0);
-			}
-		} else {
-			if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
-				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ADR;
-				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ISAC;
-				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_HSCX;
-				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
-				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
-				cs->irq_flags |= IRQF_SHARED;
-			} else {
-				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ADR;
-				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ISAC;
-				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_HSCX;
-				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_ON;
-				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_OFF;
-			}
-			cs->irq_func = &sedlbauer_interrupt;
-			ISACVersion(cs, "Sedlbauer:");
-
-			if (HscxVersion(cs, "Sedlbauer:")) {
-				printk(KERN_WARNING
-				       "Sedlbauer: wrong HSCX versions check IO address\n");
-				release_io_sedlbauer(cs);
-				return (0);
-			}
-		}
-	}
-	return (1);
-}