isdn: remove hisax driver

With the decline of ISDN, this seems to have become almost completely
obsolete, and even in the past years before that, almost all remaining
users appear to have used mISDN instead.

Birger Harzenetter noted that he is still using i4l/hisax to take
advantage of the 'divert' driver for call diversion, but otherwise uses
mISDN on the same hardware. This is a rare edge case as far as I
can tell, but we are still breaking an actively used work flow
(see https://xkcd.com/1172/).

We debated moving i4l/hisax to staging as an intermediate step, but as
he is not likely to change the setup, and that would just delay breaking
this use case.  The alternatives here are to stay on stable kernels
< 5.2, to create an external driver repository for isdn4linux, or to
add divert functionality to mISDN.

Cc: Birger Harzenetter <WIMPy@yeti.dk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 433 deletions

diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c
deleted file mode 100644
index dd663ea57ec6..000000000000
--- a/drivers/isdn/hisax/bkm_a8.c
+++ /dev/null
@@ -1,433 +0,0 @@
-/* $Id: bkm_a8.c,v 1.22.2.4 2004/01/15 14:02:34 keil Exp $
- *
- * low level stuff for Scitel Quadro (4*S0, passive)
- *
- * Author       Roland Klabunde
- * Copyright    by Roland Klabunde   <R.Klabunde@Berkom.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-
-#include <linux/init.h>
-#include "hisax.h"
-#include "isac.h"
-#include "ipac.h"
-#include "hscx.h"
-#include "isdnl1.h"
-#include <linux/pci.h>
-#include "bkm_ax.h"
-
-#define	ATTEMPT_PCI_REMAPPING	/* Required for PLX rev 1 */
-
-static const char sct_quadro_revision[] = "$Revision: 1.22.2.4 $";
-
-static const char *sct_quadro_subtypes[] =
-{
-	"",
-	"#1",
-	"#2",
-	"#3",
-	"#4"
-};
-
-
-#define wordout(addr, val) outw(val, addr)
-#define wordin(addr) inw(addr)
-
-static inline u_char
-readreg(unsigned int ale, unsigned int adr, u_char off)
-{
-	register u_char ret;
-	wordout(ale, off);
-	ret = wordin(adr) & 0xFF;
-	return (ret);
-}
-
-static inline void
-readfifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
-{
-	int i;
-	wordout(ale, off);
-	for (i = 0; i < size; i++)
-		data[i] = wordin(adr) & 0xFF;
-}
-
-
-static inline void
-writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
-{
-	wordout(ale, off);
-	wordout(adr, data);
-}
-
-static inline void
-writefifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
-{
-	int i;
-	wordout(ale, off);
-	for (i = 0; i < size; i++)
-		wordout(adr, data[i]);
-}
-
-/* Interface functions */
-
-static u_char
-ReadISAC(struct IsdnCardState *cs, u_char offset)
-{
-	return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80));
-}
-
-static void
-WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
-{
-	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80, value);
-}
-
-static void
-ReadISACfifo(struct IsdnCardState *cs, u_char *data, int size)
-{
-	readfifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
-}
-
-static void
-WriteISACfifo(struct IsdnCardState *cs, u_char *data, int size)
-{
-	writefifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
-}
-
-
-static u_char
-ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
-{
-	return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0)));
-}
-
-static void
-WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
-{
-	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0), value);
-}
-
-/* Set the specific ipac to active */
-static void
-set_ipac_active(struct IsdnCardState *cs, u_int active)
-{
-	/* set irq mask */
-	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK,
-		 active ? 0xc0 : 0xff);
-}
-
-/*
- * fast interrupt HSCX stuff goes here
- */
-
-#define READHSCX(cs, nr, reg) readreg(cs->hw.ax.base,			\
-				      cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0))
-#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.ax.base,		\
-					      cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0), data)
-#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.base,		\
-						cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
-#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.ax.base,	\
-						  cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
-
-#include "hscx_irq.c"
-
-static irqreturn_t
-bkm_interrupt_ipac(int intno, void *dev_id)
-{
-	struct IsdnCardState *cs = dev_id;
-	u_char ista, val, icnt = 5;
-	u_long flags;
-
-	spin_lock_irqsave(&cs->lock, flags);
-	ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
-	if (!(ista & 0x3f)) { /* not this IPAC */
-		spin_unlock_irqrestore(&cs->lock, flags);
-		return IRQ_NONE;
-	}
-Start_IPAC:
-	if (cs->debug & L1_DEB_IPAC)
-		debugl1(cs, "IPAC ISTA %02X", ista);
-	if (ista & 0x0f) {
-		val = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, HSCX_ISTA + 0x40);
-		if (ista & 0x01)
-			val |= 0x01;
-		if (ista & 0x04)
-			val |= 0x02;
-		if (ista & 0x08)
-			val |= 0x04;
-		if (val) {
-			hscx_int_main(cs, val);
-		}
-	}
-	if (ista & 0x20) {
-		val = 0xfe & readreg(cs->hw.ax.base, cs->hw.ax.data_adr, ISAC_ISTA | 0x80);
-		if (val) {
-			isac_interrupt(cs, val);
-		}
-	}
-	if (ista & 0x10) {
-		val = 0x01;
-		isac_interrupt(cs, val);
-	}
-	ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
-	if ((ista & 0x3f) && icnt) {
-		icnt--;
-		goto Start_IPAC;
-	}
-	if (!icnt)
-		printk(KERN_WARNING "HiSax: Scitel Quadro (%s) IRQ LOOP\n",
-		       sct_quadro_subtypes[cs->subtyp]);
-	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xFF);
-	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xC0);
-	spin_unlock_irqrestore(&cs->lock, flags);
-	return IRQ_HANDLED;
-}
-
-static void
-release_io_sct_quadro(struct IsdnCardState *cs)
-{
-	release_region(cs->hw.ax.base & 0xffffffc0, 128);
-	if (cs->subtyp == SCT_1)
-		release_region(cs->hw.ax.plx_adr, 64);
-}
-
-static void
-enable_bkm_int(struct IsdnCardState *cs, unsigned bEnable)
-{
-	if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
-		if (bEnable)
-			wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) | 0x41));
-		else
-			wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) & ~0x41));
-	}
-}
-
-static void
-reset_bkm(struct IsdnCardState *cs)
-{
-	if (cs->subtyp == SCT_1) {
-		wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) & ~4));
-		mdelay(10);
-		/* Remove the soft reset */
-		wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) | 4));
-		mdelay(10);
-	}
-}
-
-static int
-BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
-{
-	u_long flags;
-
-	switch (mt) {
-	case CARD_RESET:
-		spin_lock_irqsave(&cs->lock, flags);
-		/* Disable ints */
-		set_ipac_active(cs, 0);
-		enable_bkm_int(cs, 0);
-		reset_bkm(cs);
-		spin_unlock_irqrestore(&cs->lock, flags);
-		return (0);
-	case CARD_RELEASE:
-		/* Sanity */
-		spin_lock_irqsave(&cs->lock, flags);
-		set_ipac_active(cs, 0);
-		enable_bkm_int(cs, 0);
-		spin_unlock_irqrestore(&cs->lock, flags);
-		release_io_sct_quadro(cs);
-		return (0);
-	case CARD_INIT:
-		spin_lock_irqsave(&cs->lock, flags);
-		cs->debug |= L1_DEB_IPAC;
-		set_ipac_active(cs, 1);
-		inithscxisac(cs, 3);
-		/* Enable ints */
-		enable_bkm_int(cs, 1);
-		spin_unlock_irqrestore(&cs->lock, flags);
-		return (0);
-	case CARD_TEST:
-		return (0);
-	}
-	return (0);
-}
-
-static int sct_alloc_io(u_int adr, u_int len)
-{
-	if (!request_region(adr, len, "scitel")) {
-		printk(KERN_WARNING
-		       "HiSax: Scitel port %#x-%#x already in use\n",
-		       adr, adr + len);
-		return (1);
-	}
-	return (0);
-}
-
-static struct pci_dev *dev_a8 = NULL;
-static u16  sub_vendor_id = 0;
-static u16  sub_sys_id = 0;
-static u_char pci_bus = 0;
-static u_char pci_device_fn = 0;
-static u_char pci_irq = 0;
-
-int setup_sct_quadro(struct IsdnCard *card)
-{
-	struct IsdnCardState *cs = card->cs;
-	char tmp[64];
-	u_int found = 0;
-	u_int pci_ioaddr1, pci_ioaddr2, pci_ioaddr3, pci_ioaddr4, pci_ioaddr5;
-
-	strcpy(tmp, sct_quadro_revision);
-	printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
-	if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
-		cs->subtyp = SCT_1;	/* Preset */
-	} else
-		return (0);
-
-	/* Identify subtype by para[0] */
-	if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4)
-		cs->subtyp = card->para[0];
-	else {
-		printk(KERN_WARNING "HiSax: Scitel Quadro: Invalid "
-		       "subcontroller in configuration, default to 1\n");
-		return (0);
-	}
-	if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
-				      (sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
-		return (0);
-	if (cs->subtyp == SCT_1) {
-		while ((dev_a8 = hisax_find_pci_device(PCI_VENDOR_ID_PLX,
-						       PCI_DEVICE_ID_PLX_9050, dev_a8))) {
-
-			sub_vendor_id = dev_a8->subsystem_vendor;
-			sub_sys_id = dev_a8->subsystem_device;
-			if ((sub_sys_id == PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) &&
-			    (sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
-				if (pci_enable_device(dev_a8))
-					return (0);
-				pci_ioaddr1 = pci_resource_start(dev_a8, 1);
-				pci_irq = dev_a8->irq;
-				pci_bus = dev_a8->bus->number;
-				pci_device_fn = dev_a8->devfn;
-				found = 1;
-				break;
-			}
-		}
-		if (!found) {
-			printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
-			       "Card not found\n",
-			       sct_quadro_subtypes[cs->subtyp]);
-			return (0);
-		}
-#ifdef ATTEMPT_PCI_REMAPPING
-/* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
-		if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
-			printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
-			       "PLX rev 1, remapping required!\n",
-			       sct_quadro_subtypes[cs->subtyp]);
-			/* Restart PCI negotiation */
-			pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int)-1);
-			/* Move up by 0x80 byte */
-			pci_ioaddr1 += 0x80;
-			pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
-			pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, pci_ioaddr1);
-			dev_a8->resource[1].start = pci_ioaddr1;
-		}
-#endif /* End HACK */
-	}
-	if (!pci_irq) {		/* IRQ range check ?? */
-		printk(KERN_WARNING "HiSax: Scitel Quadro (%s): No IRQ\n",
-		       sct_quadro_subtypes[cs->subtyp]);
-		return (0);
-	}
-	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_1, &pci_ioaddr1);
-	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_2, &pci_ioaddr2);
-	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_3, &pci_ioaddr3);
-	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
-	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
-	if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) {
-		printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
-		       "No IO base address(es)\n",
-		       sct_quadro_subtypes[cs->subtyp]);
-		return (0);
-	}
-	pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
-	pci_ioaddr2 &= PCI_BASE_ADDRESS_IO_MASK;
-	pci_ioaddr3 &= PCI_BASE_ADDRESS_IO_MASK;
-	pci_ioaddr4 &= PCI_BASE_ADDRESS_IO_MASK;
-	pci_ioaddr5 &= PCI_BASE_ADDRESS_IO_MASK;
-	/* Take over */
-	cs->irq = pci_irq;
-	cs->irq_flags |= IRQF_SHARED;
-	/* pci_ioaddr1 is unique to all subdevices */
-	/* pci_ioaddr2 is for the fourth subdevice only */
-	/* pci_ioaddr3 is for the third subdevice only */
-	/* pci_ioaddr4 is for the second subdevice only */
-	/* pci_ioaddr5 is for the first subdevice only */
-	cs->hw.ax.plx_adr = pci_ioaddr1;
-	/* Enter all ipac_base addresses */
-	switch (cs->subtyp) {
-	case 1:
-		cs->hw.ax.base = pci_ioaddr5 + 0x00;
-		if (sct_alloc_io(pci_ioaddr1, 128))
-			return (0);
-		if (sct_alloc_io(pci_ioaddr5, 64))
-			return (0);
-		/* disable all IPAC */
-		writereg(pci_ioaddr5, pci_ioaddr5 + 4,
-			 IPAC_MASK, 0xFF);
-		writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c,
-			 IPAC_MASK, 0xFF);
-		writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14,
-			 IPAC_MASK, 0xFF);
-		writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24,
-			 IPAC_MASK, 0xFF);
-		break;
-	case 2:
-		cs->hw.ax.base = pci_ioaddr4 + 0x08;
-		if (sct_alloc_io(pci_ioaddr4, 64))
-			return (0);
-		break;
-	case 3:
-		cs->hw.ax.base = pci_ioaddr3 + 0x10;
-		if (sct_alloc_io(pci_ioaddr3, 64))
-			return (0);
-		break;
-	case 4:
-		cs->hw.ax.base = pci_ioaddr2 + 0x20;
-		if (sct_alloc_io(pci_ioaddr2, 64))
-			return (0);
-		break;
-	}
-	/* For isac and hscx data path */
-	cs->hw.ax.data_adr = cs->hw.ax.base + 4;
-
-	printk(KERN_INFO "HiSax: Scitel Quadro (%s) configured at "
-	       "0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
-	       sct_quadro_subtypes[cs->subtyp],
-	       cs->hw.ax.plx_adr,
-	       cs->hw.ax.base,
-	       cs->hw.ax.data_adr,
-	       cs->irq);
-
-	test_and_set_bit(HW_IPAC, &cs->HW_Flags);
-
-	cs->readisac = &ReadISAC;
-	cs->writeisac = &WriteISAC;
-	cs->readisacfifo = &ReadISACfifo;
-	cs->writeisacfifo = &WriteISACfifo;
-
-	cs->BC_Read_Reg = &ReadHSCX;
-	cs->BC_Write_Reg = &WriteHSCX;
-	cs->BC_Send_Data = &hscx_fill_fifo;
-	cs->cardmsg = &BKM_card_msg;
-	cs->irq_func = &bkm_interrupt_ipac;
-
-	printk(KERN_INFO "HiSax: Scitel Quadro (%s): IPAC Version %d\n",
-	       sct_quadro_subtypes[cs->subtyp],
-	       readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
-	return (1);
-}