Merge branch 'next' into for-linus

Prepare input updates for 4.19 merge window.

12 files changed, 655 insertions, 153 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 32267c1afebc..5374bd573e66 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -151,6 +151,18 @@ config TOUCHSCREEN_BU21013
 	  To compile this driver as a module, choose M here: the
 	  module will be called bu21013_ts.
 
+config TOUCHSCREEN_BU21029
+	tristate "Rohm BU21029 based touch panel controllers"
+	depends on I2C
+	help
+	  Say Y here if you have a Rohm BU21029 touchscreen controller
+	  connected to your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bu21029_ts.
+
 config TOUCHSCREEN_CHIPONE_ICN8318
 	tristate "chipone icn8318 touchscreen controller"
 	depends on GPIOLIB || COMPILE_TEST
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index fd4fd32fb73f..c2175163152d 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C)	+= ar1021_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT)	+= atmel_mxt_ts.o
 obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR)	+= auo-pixcir-ts.o
 obj-$(CONFIG_TOUCHSCREEN_BU21013)	+= bu21013_ts.o
+obj-$(CONFIG_TOUCHSCREEN_BU21029)	+= bu21029_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318)	+= chipone_icn8318.o
 obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8505)	+= chipone_icn8505.o
 obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 54fe190fd4bc..3232af5dcf89 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -75,6 +75,7 @@
 #define MXT_SPT_DIGITIZER_T43		43
 #define MXT_SPT_MESSAGECOUNT_T44	44
 #define MXT_SPT_CTECONFIG_T46		46
+#define MXT_SPT_DYNAMICCONFIGURATIONCONTAINER_T71 71
 #define MXT_TOUCH_MULTITOUCHSCREEN_T100 100
 
 /* MXT_GEN_MESSAGE_T5 object */
@@ -88,12 +89,12 @@
 #define MXT_COMMAND_DIAGNOSTIC	5
 
 /* Define for T6 status byte */
-#define MXT_T6_STATUS_RESET	(1 << 7)
-#define MXT_T6_STATUS_OFL	(1 << 6)
-#define MXT_T6_STATUS_SIGERR	(1 << 5)
-#define MXT_T6_STATUS_CAL	(1 << 4)
-#define MXT_T6_STATUS_CFGERR	(1 << 3)
-#define MXT_T6_STATUS_COMSERR	(1 << 2)
+#define MXT_T6_STATUS_RESET	BIT(7)
+#define MXT_T6_STATUS_OFL	BIT(6)
+#define MXT_T6_STATUS_SIGERR	BIT(5)
+#define MXT_T6_STATUS_CAL	BIT(4)
+#define MXT_T6_STATUS_CFGERR	BIT(3)
+#define MXT_T6_STATUS_COMSERR	BIT(2)
 
 /* MXT_GEN_POWER_T7 field */
 struct t7_config {
@@ -112,14 +113,14 @@ struct t7_config {
 #define MXT_T9_RANGE		18
 
 /* MXT_TOUCH_MULTI_T9 status */
-#define MXT_T9_UNGRIP		(1 << 0)
-#define MXT_T9_SUPPRESS		(1 << 1)
-#define MXT_T9_AMP		(1 << 2)
-#define MXT_T9_VECTOR		(1 << 3)
-#define MXT_T9_MOVE		(1 << 4)
-#define MXT_T9_RELEASE		(1 << 5)
-#define MXT_T9_PRESS		(1 << 6)
-#define MXT_T9_DETECT		(1 << 7)
+#define MXT_T9_UNGRIP		BIT(0)
+#define MXT_T9_SUPPRESS		BIT(1)
+#define MXT_T9_AMP		BIT(2)
+#define MXT_T9_VECTOR		BIT(3)
+#define MXT_T9_MOVE		BIT(4)
+#define MXT_T9_RELEASE		BIT(5)
+#define MXT_T9_PRESS		BIT(6)
+#define MXT_T9_DETECT		BIT(7)
 
 struct t9_range {
 	__le16 x;
@@ -127,9 +128,9 @@ struct t9_range {
 } __packed;
 
 /* MXT_TOUCH_MULTI_T9 orient */
-#define MXT_T9_ORIENT_SWITCH	(1 << 0)
-#define MXT_T9_ORIENT_INVERTX	(1 << 1)
-#define MXT_T9_ORIENT_INVERTY	(1 << 2)
+#define MXT_T9_ORIENT_SWITCH	BIT(0)
+#define MXT_T9_ORIENT_INVERTX	BIT(1)
+#define MXT_T9_ORIENT_INVERTY	BIT(2)
 
 /* MXT_SPT_COMMSCONFIG_T18 */
 #define MXT_COMMS_CTRL		0
@@ -214,7 +215,7 @@ enum t100_type {
 #define MXT_FRAME_CRC_PASS	0x04
 #define MXT_APP_CRC_FAIL	0x40	/* valid 7 8 bit only */
 #define MXT_BOOT_STATUS_MASK	0x3f
-#define MXT_BOOT_EXTENDED_ID	(1 << 5)
+#define MXT_BOOT_EXTENDED_ID	BIT(5)
 #define MXT_BOOT_ID_MASK	0x1f
 
 /* Touchscreen absolute values */
@@ -276,6 +277,19 @@ enum mxt_suspend_mode {
 	MXT_SUSPEND_T9_CTRL	= 1,
 };
 
+/* Config update context */
+struct mxt_cfg {
+	u8 *raw;
+	size_t raw_size;
+	off_t raw_pos;
+
+	u8 *mem;
+	size_t mem_size;
+	int start_ofs;
+
+	struct mxt_info info;
+};
+
 /* Each client has this additional data */
 struct mxt_data {
 	struct i2c_client *client;
@@ -317,6 +331,7 @@ struct mxt_data {
 	u8 T6_reportid;
 	u16 T6_address;
 	u16 T7_address;
+	u16 T71_address;
 	u8 T9_reportid_min;
 	u8 T9_reportid_max;
 	u8 T19_reportid;
@@ -382,6 +397,7 @@ static bool mxt_object_readable(unsigned int type)
 	case MXT_SPT_USERDATA_T38:
 	case MXT_SPT_DIGITIZER_T43:
 	case MXT_SPT_CTECONFIG_T46:
+	case MXT_SPT_DYNAMICCONFIGURATIONCONTAINER_T71:
 		return true;
 	default:
 		return false;
@@ -712,13 +728,13 @@ static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg)
 	u8 status = msg[1];
 	u32 crc = msg[2] | (msg[3] << 8) | (msg[4] << 16);
 
-	complete(&data->crc_completion);
-
 	if (crc != data->config_crc) {
 		data->config_crc = crc;
 		dev_dbg(dev, "T6 Config Checksum: 0x%06X\n", crc);
 	}
 
+	complete(&data->crc_completion);
+
 	/* Detect reset */
 	if (status & MXT_T6_STATUS_RESET)
 		complete(&data->reset_completion);
@@ -827,6 +843,10 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
 			mxt_input_sync(data);
 		}
 
+		/* if active, pressure must be non-zero */
+		if (!amplitude)
+			amplitude = MXT_PRESSURE_DEFAULT;
+
 		/* Touch active */
 		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 1);
 		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
@@ -1279,12 +1299,7 @@ static u32 mxt_calculate_crc(u8 *base, off_t start_off, off_t end_off)
 	return crc;
 }
 
-static int mxt_prepare_cfg_mem(struct mxt_data *data,
-			       const struct firmware *cfg,
-			       unsigned int data_pos,
-			       unsigned int cfg_start_ofs,
-			       u8 *config_mem,
-			       size_t config_mem_size)
+static int mxt_prepare_cfg_mem(struct mxt_data *data, struct mxt_cfg *cfg)
 {
 	struct device *dev = &data->client->dev;
 	struct mxt_object *object;
@@ -1295,9 +1310,9 @@ static int mxt_prepare_cfg_mem(struct mxt_data *data,
 	u16 reg;
 	u8 val;
 
-	while (data_pos < cfg->size) {
+	while (cfg->raw_pos < cfg->raw_size) {
 		/* Read type, instance, length */
-		ret = sscanf(cfg->data + data_pos, "%x %x %x%n",
+		ret = sscanf(cfg->raw + cfg->raw_pos, "%x %x %x%n",
 			     &type, &instance, &size, &offset);
 		if (ret == 0) {
 			/* EOF */
@@ -1306,20 +1321,20 @@ static int mxt_prepare_cfg_mem(struct mxt_data *data,
 			dev_err(dev, "Bad format: failed to parse object\n");
 			return -EINVAL;
 		}
-		data_pos += offset;
+		cfg->raw_pos += offset;
 
 		object = mxt_get_object(data, type);
 		if (!object) {
 			/* Skip object */
 			for (i = 0; i < size; i++) {
-				ret = sscanf(cfg->data + data_pos, "%hhx%n",
+				ret = sscanf(cfg->raw + cfg->raw_pos, "%hhx%n",
 					     &val, &offset);
 				if (ret != 1) {
 					dev_err(dev, "Bad format in T%d at %d\n",
 						type, i);
 					return -EINVAL;
 				}
-				data_pos += offset;
+				cfg->raw_pos += offset;
 			}
 			continue;
 		}
@@ -1354,7 +1369,7 @@ static int mxt_prepare_cfg_mem(struct mxt_data *data,
 		reg = object->start_address + mxt_obj_size(object) * instance;
 
 		for (i = 0; i < size; i++) {
-			ret = sscanf(cfg->data + data_pos, "%hhx%n",
+			ret = sscanf(cfg->raw + cfg->raw_pos, "%hhx%n",
 				     &val,
 				     &offset);
 			if (ret != 1) {
@@ -1362,15 +1377,15 @@ static int mxt_prepare_cfg_mem(struct mxt_data *data,
 					type, i);
 				return -EINVAL;
 			}
-			data_pos += offset;
+			cfg->raw_pos += offset;
 
 			if (i > mxt_obj_size(object))
 				continue;
 
-			byte_offset = reg + i - cfg_start_ofs;
+			byte_offset = reg + i - cfg->start_ofs;
 
-			if (byte_offset >= 0 && byte_offset < config_mem_size) {
-				*(config_mem + byte_offset) = val;
+			if (byte_offset >= 0 && byte_offset < cfg->mem_size) {
+				*(cfg->mem + byte_offset) = val;
 			} else {
 				dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n",
 					reg, object->type, byte_offset);
@@ -1382,22 +1397,21 @@ static int mxt_prepare_cfg_mem(struct mxt_data *data,
 	return 0;
 }
 
-static int mxt_upload_cfg_mem(struct mxt_data *data, unsigned int cfg_start,
-			      u8 *config_mem, size_t config_mem_size)
+static int mxt_upload_cfg_mem(struct mxt_data *data, struct mxt_cfg *cfg)
 {
 	unsigned int byte_offset = 0;
 	int error;
 
 	/* Write configuration as blocks */
-	while (byte_offset < config_mem_size) {
-		unsigned int size = config_mem_size - byte_offset;
+	while (byte_offset < cfg->mem_size) {
+		unsigned int size = cfg->mem_size - byte_offset;
 
 		if (size > MXT_MAX_BLOCK_WRITE)
 			size = MXT_MAX_BLOCK_WRITE;
 
 		error = __mxt_write_reg(data->client,
-					cfg_start + byte_offset,
-					size, config_mem + byte_offset);
+					cfg->start_ofs + byte_offset,
+					size, cfg->mem + byte_offset);
 		if (error) {
 			dev_err(&data->client->dev,
 				"Config write error, ret=%d\n", error);
@@ -1431,65 +1445,75 @@ static int mxt_init_t7_power_cfg(struct mxt_data *data);
  *   <SIZE> - 2-byte object size as hex
  *   <CONTENTS> - array of <SIZE> 1-byte hex values
  */
-static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
+static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)
 {
 	struct device *dev = &data->client->dev;
-	struct mxt_info cfg_info;
+	struct mxt_cfg cfg;
 	int ret;
 	int offset;
-	int data_pos;
 	int i;
-	int cfg_start_ofs;
 	u32 info_crc, config_crc, calculated_crc;
-	u8 *config_mem;
-	size_t config_mem_size;
+	u16 crc_start = 0;
+
+	/* Make zero terminated copy of the OBP_RAW file */
+	cfg.raw = kmemdup_nul(fw->data, fw->size, GFP_KERNEL);
+	if (!cfg.raw)
+		return -ENOMEM;
+
+	cfg.raw_size = fw->size;
 
 	mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1);
 
-	if (strncmp(cfg->data, MXT_CFG_MAGIC, strlen(MXT_CFG_MAGIC))) {
+	if (strncmp(cfg.raw, MXT_CFG_MAGIC, strlen(MXT_CFG_MAGIC))) {
 		dev_err(dev, "Unrecognised config file\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto release_raw;
 	}
 
-	data_pos = strlen(MXT_CFG_MAGIC);
+	cfg.raw_pos = strlen(MXT_CFG_MAGIC);
 
 	/* Load information block and check */
 	for (i = 0; i < sizeof(struct mxt_info); i++) {
-		ret = sscanf(cfg->data + data_pos, "%hhx%n",
-			     (unsigned char *)&cfg_info + i,
+		ret = sscanf(cfg.raw + cfg.raw_pos, "%hhx%n",
+			     (unsigned char *)&cfg.info + i,
 			     &offset);
 		if (ret != 1) {
 			dev_err(dev, "Bad format\n");
-			return -EINVAL;
+			ret = -EINVAL;
+			goto release_raw;
 		}
 
-		data_pos += offset;
+		cfg.raw_pos += offset;
 	}
 
-	if (cfg_info.family_id != data->info->family_id) {
+	if (cfg.info.family_id != data->info->family_id) {
 		dev_err(dev, "Family ID mismatch!\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto release_raw;
 	}
 
-	if (cfg_info.variant_id != data->info->variant_id) {
+	if (cfg.info.variant_id != data->info->variant_id) {
 		dev_err(dev, "Variant ID mismatch!\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto release_raw;
 	}
 
 	/* Read CRCs */
-	ret = sscanf(cfg->data + data_pos, "%x%n", &info_crc, &offset);
+	ret = sscanf(cfg.raw + cfg.raw_pos, "%x%n", &info_crc, &offset);
 	if (ret != 1) {
 		dev_err(dev, "Bad format: failed to parse Info CRC\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto release_raw;
 	}
-	data_pos += offset;
+	cfg.raw_pos += offset;
 
-	ret = sscanf(cfg->data + data_pos, "%x%n", &config_crc, &offset);
+	ret = sscanf(cfg.raw + cfg.raw_pos, "%x%n", &config_crc, &offset);
 	if (ret != 1) {
 		dev_err(dev, "Bad format: failed to parse Config CRC\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto release_raw;
 	}
-	data_pos += offset;
+	cfg.raw_pos += offset;
 
 	/*
 	 * The Info Block CRC is calculated over mxt_info and the object
@@ -1515,39 +1539,39 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
 	}
 
 	/* Malloc memory to store configuration */
-	cfg_start_ofs = MXT_OBJECT_START +
+	cfg.start_ofs = MXT_OBJECT_START +
 			data->info->object_num * sizeof(struct mxt_object) +
 			MXT_INFO_CHECKSUM_SIZE;
-	config_mem_size = data->mem_size - cfg_start_ofs;
-	config_mem = kzalloc(config_mem_size, GFP_KERNEL);
-	if (!config_mem) {
-		dev_err(dev, "Failed to allocate memory\n");
-		return -ENOMEM;
+	cfg.mem_size = data->mem_size - cfg.start_ofs;
+	cfg.mem = kzalloc(cfg.mem_size, GFP_KERNEL);
+	if (!cfg.mem) {
+		ret = -ENOMEM;
+		goto release_raw;
 	}
 
-	ret = mxt_prepare_cfg_mem(data, cfg, data_pos, cfg_start_ofs,
-				  config_mem, config_mem_size);
+	ret = mxt_prepare_cfg_mem(data, &cfg);
 	if (ret)
 		goto release_mem;
 
 	/* Calculate crc of the received configs (not the raw config file) */
-	if (data->T7_address < cfg_start_ofs) {
-		dev_err(dev, "Bad T7 address, T7addr = %x, config offset %x\n",
-			data->T7_address, cfg_start_ofs);
-		ret = 0;
-		goto release_mem;
-	}
+	if (data->T71_address)
+		crc_start = data->T71_address;
+	else if (data->T7_address)
+		crc_start = data->T7_address;
+	else
+		dev_warn(dev, "Could not find CRC start\n");
 
-	calculated_crc = mxt_calculate_crc(config_mem,
-					   data->T7_address - cfg_start_ofs,
-					   config_mem_size);
+	if (crc_start > cfg.start_ofs) {
+		calculated_crc = mxt_calculate_crc(cfg.mem,
+						   crc_start - cfg.start_ofs,
+						   cfg.mem_size);
 
-	if (config_crc > 0 && config_crc != calculated_crc)
-		dev_warn(dev, "Config CRC error, calculated=%06X, file=%06X\n",
-			 calculated_crc, config_crc);
+		if (config_crc > 0 && config_crc != calculated_crc)
+			dev_warn(dev, "Config CRC in file inconsistent, calculated=%06X, file=%06X\n",
+				 calculated_crc, config_crc);
+	}
 
-	ret = mxt_upload_cfg_mem(data, cfg_start_ofs,
-				 config_mem, config_mem_size);
+	ret = mxt_upload_cfg_mem(data, &cfg);
 	if (ret)
 		goto release_mem;
 
@@ -1562,8 +1586,10 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
 	/* T7 config may have changed */
 	mxt_init_t7_power_cfg(data);
 
+release_raw:
+	kfree(cfg.raw);
 release_mem:
-	kfree(config_mem);
+	kfree(cfg.mem);
 	return ret;
 }
 
@@ -1591,6 +1617,7 @@ static void mxt_free_object_table(struct mxt_data *data)
 	data->T5_msg_size = 0;
 	data->T6_reportid = 0;
 	data->T7_address = 0;
+	data->T71_address = 0;
 	data->T9_reportid_min = 0;
 	data->T9_reportid_max = 0;
 	data->T19_reportid = 0;
@@ -1656,12 +1683,16 @@ static int mxt_parse_object_table(struct mxt_data *data,
 		case MXT_GEN_POWER_T7:
 			data->T7_address = object->start_address;
 			break;
+		case MXT_SPT_DYNAMICCONFIGURATIONCONTAINER_T71:
+			data->T71_address = object->start_address;
+			break;
 		case MXT_TOUCH_MULTI_T9:
 			data->multitouch = MXT_TOUCH_MULTI_T9;
+			/* Only handle messages from first T9 instance */
 			data->T9_reportid_min = min_id;
-			data->T9_reportid_max = max_id;
-			data->num_touchids = object->num_report_ids
-						* mxt_obj_instances(object);
+			data->T9_reportid_max = min_id +
+						object->num_report_ids - 1;
+			data->num_touchids = object->num_report_ids;
 			break;
 		case MXT_SPT_MESSAGECOUNT_T44:
 			data->T44_address = object->start_address;
@@ -1981,10 +2012,8 @@ static int mxt_initialize_input_device(struct mxt_data *data)
 
 	/* Register input device */
 	input_dev = input_allocate_device();
-	if (!input_dev) {
-		dev_err(dev, "Failed to allocate memory\n");
+	if (!input_dev)
 		return -ENOMEM;
-	}
 
 	input_dev->name = "Atmel maXTouch Touchscreen";
 	input_dev->phys = data->phys;
@@ -2055,12 +2084,6 @@ static int mxt_initialize_input_device(struct mxt_data *data)
 	}
 
 	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
-	    data->t100_aux_ampl) {
-		input_set_abs_params(input_dev, ABS_MT_PRESSURE,
-				     0, 255, 0, 0);
-	}
-
-	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
 	    data->t100_aux_vect) {
 		input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
 				     0, 255, 0, 0);
diff --git a/drivers/input/touchscreen/bu21029_ts.c b/drivers/input/touchscreen/bu21029_ts.c
new file mode 100644
index 000000000000..49a8d4bbca3a
--- /dev/null
+++ b/drivers/input/touchscreen/bu21029_ts.c
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rohm BU21029 touchscreen controller driver
+ *
+ * Copyright (C) 2015-2018 Bosch Sicherheitssysteme GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/timer.h>
+
+/*
+ * HW_ID1 Register (PAGE=0, ADDR=0x0E, Reset value=0x02, Read only)
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * |   D7   |   D6   |   D5   |   D4   |   D3   |   D2   |   D1   |   D0   |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * |                                 HW_IDH                                |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * HW_ID2 Register (PAGE=0, ADDR=0x0F, Reset value=0x29, Read only)
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * |   D7   |   D6   |   D5   |   D4   |   D3   |   D2   |   D1   |   D0   |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * |                                 HW_IDL                                |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * HW_IDH: high 8bits of IC's ID
+ * HW_IDL: low  8bits of IC's ID
+ */
+#define BU21029_HWID_REG	(0x0E << 3)
+#define SUPPORTED_HWID		0x0229
+
+/*
+ * CFR0 Register (PAGE=0, ADDR=0x00, Reset value=0x20)
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * |   D7   |   D6   |   D5   |   D4   |   D3   |   D2   |   D1   |   D0   |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * |   0    |   0    |  CALIB |  INTRM |   0    |   0    |   0    |   0    |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * CALIB: 0 = not to use calibration result (*)
+ *        1 = use calibration result
+ * INTRM: 0 = INT output depend on "pen down" (*)
+ *        1 = INT output always "0"
+ */
+#define BU21029_CFR0_REG	(0x00 << 3)
+#define CFR0_VALUE		0x00
+
+/*
+ * CFR1 Register (PAGE=0, ADDR=0x01, Reset value=0xA6)
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * |   D7   |   D6   |   D5   |   D4   |   D3   |   D2   |   D1   |   D0   |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * |  MAV   |         AVE[2:0]         |   0    |         SMPL[2:0]        |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * MAV:  0 = median average filter off
+ *       1 = median average filter on (*)
+ * AVE:  AVE+1 = number of average samples for MAV,
+ *               if AVE>SMPL, then AVE=SMPL (=3)
+ * SMPL: SMPL+1 = number of conversion samples for MAV (=7)
+ */
+#define BU21029_CFR1_REG	(0x01 << 3)
+#define CFR1_VALUE		0xA6
+
+/*
+ * CFR2 Register (PAGE=0, ADDR=0x02, Reset value=0x04)
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * |   D7   |   D6   |   D5   |   D4   |   D3   |   D2   |   D1   |   D0   |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * |          INTVL_TIME[3:0]          |          TIME_ST_ADC[3:0]         |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * INTVL_TIME: waiting time between completion of conversion
+ *             and start of next conversion, only usable in
+ *             autoscan mode (=20.480ms)
+ * TIME_ST_ADC: waiting time between application of voltage
+ *              to panel and start of A/D conversion (=100us)
+ */
+#define BU21029_CFR2_REG	(0x02 << 3)
+#define CFR2_VALUE		0xC9
+
+/*
+ * CFR3 Register (PAGE=0, ADDR=0x0B, Reset value=0x72)
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * |   D7   |   D6   |   D5   |   D4   |   D3   |   D2   |   D1   |   D0   |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * |  RM8   | STRETCH|  PU90K |  DUAL  |           PIDAC_OFS[3:0]          |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * RM8: 0 = coordinate resolution is 12bit (*)
+ *      1 = coordinate resolution is 8bit
+ * STRETCH: 0 = SCL_STRETCH function off
+ *          1 = SCL_STRETCH function on (*)
+ * PU90K: 0 = internal pull-up resistance for touch detection is ~50kohms (*)
+ *        1 = internal pull-up resistance for touch detection is ~90kohms
+ * DUAL: 0 = dual touch detection off (*)
+ *       1 = dual touch detection on
+ * PIDAC_OFS: dual touch detection circuit adjustment, it is not necessary
+ *            to change this from initial value
+ */
+#define BU21029_CFR3_REG	(0x0B << 3)
+#define CFR3_VALUE		0x42
+
+/*
+ * LDO Register (PAGE=0, ADDR=0x0C, Reset value=0x00)
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * |   D7   |   D6   |   D5   |   D4   |   D3   |   D2   |   D1   |   D0   |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * |   0    |         PVDD[2:0]        |   0    |         AVDD[2:0]        |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * PVDD: output voltage of panel output regulator (=2.000V)
+ * AVDD: output voltage of analog circuit regulator (=2.000V)
+ */
+#define BU21029_LDO_REG		(0x0C << 3)
+#define LDO_VALUE		0x77
+
+/*
+ * Serial Interface Command Byte 1 (CID=1)
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * |   D7   |   D6   |   D5   |   D4   |   D3   |   D2   |   D1   |   D0   |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * |   1    |                 CF                |  CMSK  |  PDM   |  STP   |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+
+ * CF: conversion function, see table 3 in datasheet p6 (=0000, automatic scan)
+ * CMSK: 0 = executes convert function (*)
+ *       1 = reads the convert result
+ * PDM: 0 = power down after convert function stops (*)
+ *      1 = keep power on after convert function stops
+ * STP: 1 = abort current conversion and power down, set to "0" automatically
+ */
+#define BU21029_AUTOSCAN	0x80
+
+/*
+ * The timeout value needs to be larger than INTVL_TIME + tConv4 (sample and
+ * conversion time), where tConv4 is calculated by formula:
+ * tPON + tDLY1 + (tTIME_ST_ADC + (tADC * tSMPL) * 2 + tDLY2) * 3
+ * see figure 8 in datasheet p15 for details of each field.
+ */
+#define PEN_UP_TIMEOUT_MS	50
+
+#define STOP_DELAY_MIN_US	50
+#define STOP_DELAY_MAX_US	1000
+#define START_DELAY_MS		2
+#define BUF_LEN			8
+#define SCALE_12BIT		(1 << 12)
+#define MAX_12BIT		((1 << 12) - 1)
+#define DRIVER_NAME		"bu21029"
+
+struct bu21029_ts_data {
+	struct i2c_client		*client;
+	struct input_dev		*in_dev;
+	struct timer_list		timer;
+	struct regulator		*vdd;
+	struct gpio_desc		*reset_gpios;
+	u32				x_plate_ohms;
+	struct touchscreen_properties	prop;
+};
+
+static void bu21029_touch_report(struct bu21029_ts_data *bu21029, const u8 *buf)
+{
+	u16 x, y, z1, z2;
+	u32 rz;
+	s32 max_pressure = input_abs_get_max(bu21029->in_dev, ABS_PRESSURE);
+
+	/*
+	 * compose upper 8 and lower 4 bits into a 12bit value:
+	 * +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
+	 * |            ByteH              |            ByteL              |
+	 * +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
+	 * |b07|b06|b05|b04|b03|b02|b01|b00|b07|b06|b05|b04|b03|b02|b01|b00|
+	 * +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
+	 * |v11|v10|v09|v08|v07|v06|v05|v04|v03|v02|v01|v00| 0 | 0 | 0 | 0 |
+	 * +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
+	 */
+	x  = (buf[0] << 4) | (buf[1] >> 4);
+	y  = (buf[2] << 4) | (buf[3] >> 4);
+	z1 = (buf[4] << 4) | (buf[5] >> 4);
+	z2 = (buf[6] << 4) | (buf[7] >> 4);
+
+	if (z1 && z2) {
+		/*
+		 * calculate Rz (pressure resistance value) by equation:
+		 * Rz = Rx * (x/Q) * ((z2/z1) - 1), where
+		 * Rx is x-plate resistance,
+		 * Q  is the touch screen resolution (8bit = 256, 12bit = 4096)
+		 * x, z1, z2 are the measured positions.
+		 */
+		rz  = z2 - z1;
+		rz *= x;
+		rz *= bu21029->x_plate_ohms;
+		rz /= z1;
+		rz  = DIV_ROUND_CLOSEST(rz, SCALE_12BIT);
+		if (rz <= max_pressure) {
+			touchscreen_report_pos(bu21029->in_dev, &bu21029->prop,
+					       x, y, false);
+			input_report_abs(bu21029->in_dev, ABS_PRESSURE,
+					 max_pressure - rz);
+			input_report_key(bu21029->in_dev, BTN_TOUCH, 1);
+			input_sync(bu21029->in_dev);
+		}
+	}
+}
+
+static void bu21029_touch_release(struct timer_list *t)
+{
+	struct bu21029_ts_data *bu21029 = from_timer(bu21029, t, timer);
+
+	input_report_abs(bu21029->in_dev, ABS_PRESSURE, 0);
+	input_report_key(bu21029->in_dev, BTN_TOUCH, 0);
+	input_sync(bu21029->in_dev);
+}
+
+static irqreturn_t bu21029_touch_soft_irq(int irq, void *data)
+{
+	struct bu21029_ts_data *bu21029 = data;
+	u8 buf[BUF_LEN];
+	int error;
+
+	/*
+	 * Read touch data and deassert interrupt (will assert again after
+	 * INTVL_TIME + tConv4 for continuous touch)
+	 */
+	error = i2c_smbus_read_i2c_block_data(bu21029->client, BU21029_AUTOSCAN,
+					      sizeof(buf), buf);
+	if (error < 0)
+		goto out;
+
+	bu21029_touch_report(bu21029, buf);
+
+	/* reset timer for pen up detection */
+	mod_timer(&bu21029->timer,
+		  jiffies + msecs_to_jiffies(PEN_UP_TIMEOUT_MS));
+
+out:
+	return IRQ_HANDLED;
+}
+
+static void bu21029_put_chip_in_reset(struct bu21029_ts_data *bu21029)
+{
+	if (bu21029->reset_gpios) {
+		gpiod_set_value_cansleep(bu21029->reset_gpios, 1);
+		usleep_range(STOP_DELAY_MIN_US, STOP_DELAY_MAX_US);
+	}
+}
+
+static int bu21029_start_chip(struct input_dev *dev)
+{
+	struct bu21029_ts_data *bu21029 = input_get_drvdata(dev);
+	struct i2c_client *i2c = bu21029->client;
+	struct {
+		u8 reg;
+		u8 value;
+	} init_table[] = {
+		{BU21029_CFR0_REG, CFR0_VALUE},
+		{BU21029_CFR1_REG, CFR1_VALUE},
+		{BU21029_CFR2_REG, CFR2_VALUE},
+		{BU21029_CFR3_REG, CFR3_VALUE},
+		{BU21029_LDO_REG,  LDO_VALUE}
+	};
+	int error, i;
+	__be16 hwid;
+
+	error = regulator_enable(bu21029->vdd);
+	if (error) {
+		dev_err(&i2c->dev, "failed to power up chip: %d", error);
+		return error;
+	}
+
+	/* take chip out of reset */
+	if (bu21029->reset_gpios) {
+		gpiod_set_value_cansleep(bu21029->reset_gpios, 0);
+		msleep(START_DELAY_MS);
+	}
+
+	error = i2c_smbus_read_i2c_block_data(i2c, BU21029_HWID_REG,
+					      sizeof(hwid), (u8 *)&hwid);
+	if (error < 0) {
+		dev_err(&i2c->dev, "failed to read HW ID\n");
+		goto err_out;
+	}
+
+	if (be16_to_cpu(hwid) != SUPPORTED_HWID) {
+		dev_err(&i2c->dev,
+			"unsupported HW ID 0x%x\n", be16_to_cpu(hwid));
+		error = -ENODEV;
+		goto err_out;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(init_table); ++i) {
+		error = i2c_smbus_write_byte_data(i2c,
+						  init_table[i].reg,
+						  init_table[i].value);
+		if (error < 0) {
+			dev_err(&i2c->dev,
+				"failed to write %#02x to register %#02x: %d\n",
+				init_table[i].value, init_table[i].reg,
+				error);
+			goto err_out;
+		}
+	}
+
+	error = i2c_smbus_write_byte(i2c, BU21029_AUTOSCAN);
+	if (error < 0) {
+		dev_err(&i2c->dev, "failed to start autoscan\n");
+		goto err_out;
+	}
+
+	enable_irq(bu21029->client->irq);
+	return 0;
+
+err_out:
+	bu21029_put_chip_in_reset(bu21029);
+	regulator_disable(bu21029->vdd);
+	return error;
+}
+
+static void bu21029_stop_chip(struct input_dev *dev)
+{
+	struct bu21029_ts_data *bu21029 = input_get_drvdata(dev);
+
+	disable_irq(bu21029->client->irq);
+	del_timer_sync(&bu21029->timer);
+
+	bu21029_put_chip_in_reset(bu21029);
+	regulator_disable(bu21029->vdd);
+}
+
+static int bu21029_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct bu21029_ts_data *bu21029;
+	struct input_dev *in_dev;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_WRITE_BYTE |
+				     I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
+				     I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+		dev_err(&client->dev,
+			"i2c functionality support is not sufficient\n");
+		return -EIO;
+	}
+
+	bu21029 = devm_kzalloc(&client->dev, sizeof(*bu21029), GFP_KERNEL);
+	if (!bu21029)
+		return -ENOMEM;
+
+	error = device_property_read_u32(&client->dev, "rohm,x-plate-ohms",
+					 &bu21029->x_plate_ohms);
+	if (error) {
+		dev_err(&client->dev,
+			"invalid 'x-plate-ohms' supplied: %d\n", error);
+		return error;
+	}
+
+	bu21029->vdd = devm_regulator_get(&client->dev, "vdd");
+	if (IS_ERR(bu21029->vdd)) {
+		error = PTR_ERR(bu21029->vdd);
+		if (error != -EPROBE_DEFER)
+			dev_err(&client->dev,
+				"failed to acquire 'vdd' supply: %d\n", error);
+		return error;
+	}
+
+	bu21029->reset_gpios = devm_gpiod_get_optional(&client->dev,
+						       "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(bu21029->reset_gpios)) {
+		error = PTR_ERR(bu21029->reset_gpios);
+		if (error != -EPROBE_DEFER)
+			dev_err(&client->dev,
+				"failed to acquire 'reset' gpio: %d\n", error);
+		return error;
+	}
+
+	in_dev = devm_input_allocate_device(&client->dev);
+	if (!in_dev) {
+		dev_err(&client->dev, "unable to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	bu21029->client = client;
+	bu21029->in_dev = in_dev;
+	timer_setup(&bu21029->timer, bu21029_touch_release, 0);
+
+	in_dev->name		= DRIVER_NAME;
+	in_dev->id.bustype	= BUS_I2C;
+	in_dev->open		= bu21029_start_chip;
+	in_dev->close		= bu21029_stop_chip;
+
+	input_set_capability(in_dev, EV_KEY, BTN_TOUCH);
+	input_set_abs_params(in_dev, ABS_X, 0, MAX_12BIT, 0, 0);
+	input_set_abs_params(in_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
+	input_set_abs_params(in_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);
+	touchscreen_parse_properties(in_dev, false, &bu21029->prop);
+
+	input_set_drvdata(in_dev, bu21029);
+
+	irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, bu21029_touch_soft_irq,
+					  IRQF_ONESHOT, DRIVER_NAME, bu21029);
+	if (error) {
+		dev_err(&client->dev,
+			"unable to request touch irq: %d\n", error);
+		return error;
+	}
+
+	error = input_register_device(in_dev);
+	if (error) {
+		dev_err(&client->dev,
+			"unable to register input device: %d\n", error);
+		return error;
+	}
+
+	i2c_set_clientdata(client, bu21029);
+
+	return 0;
+}
+
+static int __maybe_unused bu21029_suspend(struct device *dev)
+{
+	struct i2c_client *i2c = to_i2c_client(dev);
+	struct bu21029_ts_data *bu21029 = i2c_get_clientdata(i2c);
+
+	if (!device_may_wakeup(dev)) {
+		mutex_lock(&bu21029->in_dev->mutex);
+		if (bu21029->in_dev->users)
+			bu21029_stop_chip(bu21029->in_dev);
+		mutex_unlock(&bu21029->in_dev->mutex);
+	}
+
+	return 0;
+}
+
+static int __maybe_unused bu21029_resume(struct device *dev)
+{
+	struct i2c_client