diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-08-04 18:36:12 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-08-04 18:36:12 -0700 |
commit | 53ee983378ff23e8f3ff95ecf99dea7c6c221900 (patch) | |
tree | 85e09b2bf6317a155f1405be0d45c69051b6e041 /drivers/iio | |
parent | 29b88e23a9212136d39b0161a39afe587d0170a5 (diff) | |
parent | b9aaea39f65e242303103b5283abeaefd8e538a4 (diff) |
Merge tag 'staging-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here's the big pull request for the staging driver tree for 3.17-rc1.
Lots of things in here, over 2000 patches, but the best part is this:
1480 files changed, 39070 insertions(+), 254659 deletions(-)
Thanks to the great work of Kristina Martšenko, 14 different staging
drivers have been removed from the tree as they were obsolete and no
one was willing to work on cleaning them up. Other than the driver
removals, loads of cleanups are in here (comedi, lustre, etc.) as well
as the usual IIO driver updates and additions.
All of this has been in the linux-next tree for a while"
* tag 'staging-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (2199 commits)
staging: comedi: addi_apci_1564: remove diagnostic interrupt support code
staging: comedi: addi_apci_1564: add subdevice to check diagnostic status
staging: wlan-ng: coding style problem fix
staging: wlan-ng: fixing coding style problems
staging: comedi: ii_pci20kc: request and ioremap memory
staging: lustre: bitwise vs logical typo
staging: dgnc: Remove unneeded dgnc_trace.c and dgnc_trace.h
staging: dgnc: rephrase comment
staging: comedi: ni_tio: remove some dead code
staging: rtl8723au: Fix static symbol sparse warning
staging: rtl8723au: usb_dvobj_init(): Remove unused variable 'pdev_desc'
staging: rtl8723au: Do not duplicate kernel provided USB macros
staging: rtl8723au: Remove never set struct pwrctrl_priv.bHWPowerdown
staging: rtl8723au: Remove two never set variables
staging: rtl8723au: RSSI_test is never set
staging:r8190: coding style: Fixed checkpatch reported Error
staging:r8180: coding style: Fixed too long lines
staging:r8180: coding style: Fixed commenting style
staging: lustre: ptlrpc: lproc_ptlrpc.c - fix dereferenceing user space buffer
staging: lustre: ldlm: ldlm_resource.c - fix dereferenceing user space buffer
...
Diffstat (limited to 'drivers/iio')
61 files changed, 4717 insertions, 759 deletions
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 1e120fa1e156..12addf272a61 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -77,4 +77,16 @@ config MMA8452 To compile this driver as a module, choose M here: the module will be called mma8452. +config KXCJK1013 + tristate "Kionix 3-Axis Accelerometer Driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here if you want to build a driver for the Kionix KXCJK-1013 + triaxial acceleration sensor. + + To compile this driver as a module, choose M here: the module will + be called kxcjk-1013. + endmenu diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index dc0e379c2592..6578ca1a8e09 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -5,6 +5,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_BMA180) += bma180.o obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o +obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o obj-$(CONFIG_KXSD9) += kxsd9.o obj-$(CONFIG_MMA8452) += mma8452.o diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c new file mode 100644 index 000000000000..7941cf2d31ee --- /dev/null +++ b/drivers/iio/accel/kxcjk-1013.c @@ -0,0 +1,764 @@ +/* + * KXCJK-1013 3-axis accelerometer driver + * Copyright (c) 2014, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/acpi.h> +#include <linux/gpio/consumer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/accel/kxcjk_1013.h> + +#define KXCJK1013_DRV_NAME "kxcjk1013" +#define KXCJK1013_IRQ_NAME "kxcjk1013_event" + +#define KXCJK1013_REG_XOUT_L 0x06 +/* + * From low byte X axis register, all the other addresses of Y and Z can be + * obtained by just applying axis offset. The following axis defines are just + * provide clarity, but not used. + */ +#define KXCJK1013_REG_XOUT_H 0x07 +#define KXCJK1013_REG_YOUT_L 0x08 +#define KXCJK1013_REG_YOUT_H 0x09 +#define KXCJK1013_REG_ZOUT_L 0x0A +#define KXCJK1013_REG_ZOUT_H 0x0B + +#define KXCJK1013_REG_DCST_RESP 0x0C +#define KXCJK1013_REG_WHO_AM_I 0x0F +#define KXCJK1013_REG_INT_SRC1 0x16 +#define KXCJK1013_REG_INT_SRC2 0x17 +#define KXCJK1013_REG_STATUS_REG 0x18 +#define KXCJK1013_REG_INT_REL 0x1A +#define KXCJK1013_REG_CTRL1 0x1B +#define KXCJK1013_REG_CTRL2 0x1D +#define KXCJK1013_REG_INT_CTRL1 0x1E +#define KXCJK1013_REG_INT_CTRL2 0x1F +#define KXCJK1013_REG_DATA_CTRL 0x21 +#define KXCJK1013_REG_WAKE_TIMER 0x29 +#define KXCJK1013_REG_SELF_TEST 0x3A +#define KXCJK1013_REG_WAKE_THRES 0x6A + +#define KXCJK1013_REG_CTRL1_BIT_PC1 BIT(7) +#define KXCJK1013_REG_CTRL1_BIT_RES BIT(6) +#define KXCJK1013_REG_CTRL1_BIT_DRDY BIT(5) +#define KXCJK1013_REG_CTRL1_BIT_GSEL1 BIT(4) +#define KXCJK1013_REG_CTRL1_BIT_GSEL0 BIT(3) +#define KXCJK1013_REG_CTRL1_BIT_WUFE BIT(1) +#define KXCJK1013_REG_INT_REG1_BIT_IEA BIT(4) +#define KXCJK1013_REG_INT_REG1_BIT_IEN BIT(5) + +#define KXCJK1013_DATA_MASK_12_BIT 0x0FFF +#define KXCJK1013_MAX_STARTUP_TIME_US 100000 + +struct kxcjk1013_data { + struct i2c_client *client; + struct iio_trigger *trig; + bool trig_mode; + struct mutex mutex; + s16 buffer[8]; + int power_state; + u8 odr_bits; + bool active_high_intr; +}; + +enum kxcjk1013_axis { + AXIS_X, + AXIS_Y, + AXIS_Z, +}; + +enum kxcjk1013_mode { + STANDBY, + OPERATION, +}; + +static const struct { + int val; + int val2; + int odr_bits; +} samp_freq_table[] = { {0, 781000, 0x08}, {1, 563000, 0x09}, + {3, 125000, 0x0A}, {6, 250000, 0x0B}, {12, 500000, 0}, + {25, 0, 0x01}, {50, 0, 0x02}, {100, 0, 0x03}, + {200, 0, 0x04}, {400, 0, 0x05}, {800, 0, 0x06}, + {1600, 0, 0x07} }; + +/* Refer to section 4 of the specification */ +static const struct { + int odr_bits; + int usec; +} odr_start_up_times[] = { {0x08, 100000}, {0x09, 100000}, {0x0A, 100000}, + {0x0B, 100000}, { 0, 80000}, {0x01, 41000}, + {0x02, 21000}, {0x03, 11000}, {0x04, 6400}, + {0x05, 3900}, {0x06, 2700}, {0x07, 2100} }; + +static int kxcjk1013_set_mode(struct kxcjk1013_data *data, + enum kxcjk1013_mode mode) +{ + int ret; + + ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); + return ret; + } + + if (mode == STANDBY) + ret &= ~KXCJK1013_REG_CTRL1_BIT_PC1; + else + ret |= KXCJK1013_REG_CTRL1_BIT_PC1; + + ret = i2c_smbus_write_byte_data(data->client, + KXCJK1013_REG_CTRL1, ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_ctrl1\n"); + return ret; + } + + return 0; +} + +static int kxcjk1013_chip_init(struct kxcjk1013_data *data) +{ + int ret; + + ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_WHO_AM_I); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading who_am_i\n"); + return ret; + } + + dev_dbg(&data->client->dev, "KXCJK1013 Chip Id %x\n", ret); + + ret = kxcjk1013_set_mode(data, STANDBY); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); + return ret; + } + + /* Setting range to 4G */ + ret |= KXCJK1013_REG_CTRL1_BIT_GSEL0; + ret &= ~KXCJK1013_REG_CTRL1_BIT_GSEL1; + + /* Set 12 bit mode */ + ret |= KXCJK1013_REG_CTRL1_BIT_RES; + + ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_CTRL1, + ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_ctrl\n"); + return ret; + } + + ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_DATA_CTRL); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_data_ctrl\n"); + return ret; + } + + data->odr_bits = ret; + + /* Set up INT polarity */ + ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n"); + return ret; + } + + if (data->active_high_intr) + ret |= KXCJK1013_REG_INT_REG1_BIT_IEA; + else + ret &= ~KXCJK1013_REG_INT_REG1_BIT_IEA; + + ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1, + ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n"); + return ret; + } + + return 0; +} + +static int kxcjk1013_chip_setup_interrupt(struct kxcjk1013_data *data, + bool status) +{ + int ret; + + /* This is requirement by spec to change state to STANDBY */ + ret = kxcjk1013_set_mode(data, STANDBY); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n"); + return ret; + } + + if (status) + ret |= KXCJK1013_REG_INT_REG1_BIT_IEN; + else + ret &= ~KXCJK1013_REG_INT_REG1_BIT_IEN; + + ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1, + ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n"); + return ret; + } + + ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); + return ret; + } + + if (status) + ret |= KXCJK1013_REG_CTRL1_BIT_DRDY; + else + ret &= ~KXCJK1013_REG_CTRL1_BIT_DRDY; + + ret = i2c_smbus_write_byte_data(data->client, + KXCJK1013_REG_CTRL1, ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_ctrl1\n"); + return ret; + } + + return ret; +} + +static int kxcjk1013_convert_freq_to_bit(int val, int val2) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(samp_freq_table); ++i) { + if (samp_freq_table[i].val == val && + samp_freq_table[i].val2 == val2) { + return samp_freq_table[i].odr_bits; + } + } + + return -EINVAL; +} + +static int kxcjk1013_set_odr(struct kxcjk1013_data *data, int val, int val2) +{ + int ret; + int odr_bits; + + odr_bits = kxcjk1013_convert_freq_to_bit(val, val2); + if (odr_bits < 0) + return odr_bits; + + /* To change ODR, the chip must be set to STANDBY as per spec */ + ret = kxcjk1013_set_mode(data, STANDBY); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_DATA_CTRL, + odr_bits); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing data_ctrl\n"); + return ret; + } + + data->odr_bits = odr_bits; + + /* Check, if the ODR is changed after data enable */ + if (data->power_state) { + /* Set the state back to operation */ + ret = kxcjk1013_set_mode(data, OPERATION); + if (ret < 0) + return ret; + } + + return 0; +} + +static int kxcjk1013_get_odr(struct kxcjk1013_data *data, int *val, int *val2) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(samp_freq_table); ++i) { + if (samp_freq_table[i].odr_bits == data->odr_bits) { + *val = samp_freq_table[i].val; + *val2 = samp_freq_table[i].val2; + return IIO_VAL_INT_PLUS_MICRO; + } + } + + return -EINVAL; +} + +static int kxcjk1013_get_acc_reg(struct kxcjk1013_data *data, int axis) +{ + u8 reg = KXCJK1013_REG_XOUT_L + axis * 2; + int ret; + + ret = i2c_smbus_read_word_data(data->client, reg); + if (ret < 0) { + dev_err(&data->client->dev, + "failed to read accel_%c registers\n", 'x' + axis); + return ret; + } + + return ret; +} + +static int kxcjk1013_get_startup_times(struct kxcjk1013_data *data) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(odr_start_up_times); ++i) { + if (odr_start_up_times[i].odr_bits == data->odr_bits) + return odr_start_up_times[i].usec; + } + + return KXCJK1013_MAX_STARTUP_TIME_US; +} + +static int kxcjk1013_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct kxcjk1013_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&data->mutex); + if (iio_buffer_enabled(indio_dev)) + ret = -EBUSY; + else { + int sleep_val; + + ret = kxcjk1013_set_mode(data, OPERATION); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } + ++data->power_state; + sleep_val = kxcjk1013_get_startup_times(data); + if (sleep_val < 20000) + usleep_range(sleep_val, 20000); + else + msleep_interruptible(sleep_val/1000); + ret = kxcjk1013_get_acc_reg(data, chan->scan_index); + if (--data->power_state == 0) + kxcjk1013_set_mode(data, STANDBY); + } + mutex_unlock(&data->mutex); + + if (ret < 0) + return ret; + + *val = sign_extend32(ret >> 4, 11); + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = 19163; /* range +-4g (4/2047*9.806650) */ + return IIO_VAL_INT_PLUS_MICRO; + + case IIO_CHAN_INFO_SAMP_FREQ: + mutex_lock(&data->mutex); + ret = kxcjk1013_get_odr(data, val, val2); + mutex_unlock(&data->mutex); + return ret; + + default: + return -EINVAL; + } +} + +static int kxcjk1013_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct kxcjk1013_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + mutex_lock(&data->mutex); + ret = kxcjk1013_set_odr(data, val, val2); + mutex_unlock(&data->mutex); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int kxcjk1013_validate_trigger(struct iio_dev *indio_dev, + struct iio_trigger *trig) +{ + struct kxcjk1013_data *data = iio_priv(indio_dev); + + if (data->trig != trig) + return -EINVAL; + + return 0; +} + +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( + "0.781000 1.563000 3.125000 6.250000 12.500000 25 50 100 200 400 800 1600"); + +static struct attribute *kxcjk1013_attributes[] = { + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group kxcjk1013_attrs_group = { + .attrs = kxcjk1013_attributes, +}; + +#define KXCJK1013_CHANNEL(_axis) { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = IIO_MOD_##_axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = AXIS_##_axis, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 12, \ + .storagebits = 16, \ + .shift = 4, \ + .endianness = IIO_CPU, \ + }, \ +} + +static const struct iio_chan_spec kxcjk1013_channels[] = { + KXCJK1013_CHANNEL(X), + KXCJK1013_CHANNEL(Y), + KXCJK1013_CHANNEL(Z), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static const struct iio_info kxcjk1013_info = { + .attrs = &kxcjk1013_attrs_group, + .read_raw = kxcjk1013_read_raw, + .write_raw = kxcjk1013_write_raw, + .validate_trigger = kxcjk1013_validate_trigger, + .driver_module = THIS_MODULE, +}; + +static irqreturn_t kxcjk1013_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct kxcjk1013_data *data = iio_priv(indio_dev); + int bit, ret, i = 0; + + mutex_lock(&data->mutex); + + for_each_set_bit(bit, indio_dev->buffer->scan_mask, + indio_dev->masklength) { + ret = kxcjk1013_get_acc_reg(data, bit); + if (ret < 0) { + mutex_unlock(&data->mutex); + goto err; + } + data->buffer[i++] = ret; + } + mutex_unlock(&data->mutex); + + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + pf->timestamp); +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int kxcjk1013_trig_try_reen(struct iio_trigger *trig) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct kxcjk1013_data *data = iio_priv(indio_dev); + int ret; + + ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_REL); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_rel\n"); + return ret; + } + + return 0; +} + +static int kxcjk1013_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct kxcjk1013_data *data = iio_priv(indio_dev); + + mutex_lock(&data->mutex); + if (state) { + kxcjk1013_chip_setup_interrupt(data, true); + kxcjk1013_set_mode(data, OPERATION); + ++data->power_state; + } else { + if (--data->power_state) { + mutex_unlock(&data->mutex); + return 0; + } + kxcjk1013_chip_setup_interrupt(data, false); + kxcjk1013_set_mode(data, STANDBY); + } + mutex_unlock(&data->mutex); + + return 0; +} + +static const struct iio_trigger_ops kxcjk1013_trigger_ops = { + .set_trigger_state = kxcjk1013_data_rdy_trigger_set_state, + .try_reenable = kxcjk1013_trig_try_reen, + .owner = THIS_MODULE, +}; + +static int kxcjk1013_acpi_gpio_probe(struct i2c_client *client, + struct kxcjk1013_data *data) +{ + const struct acpi_device_id *id; + struct device *dev; + struct gpio_desc *gpio; + int ret; + + if (!client) + return -EINVAL; + + dev = &client->dev; + if (!ACPI_HANDLE(dev)) + return -ENODEV; + + id = acpi_match_device(dev->driver->acpi_match_table, dev); + if (!id) + return -ENODEV; + + /* data ready gpio interrupt pin */ + gpio = devm_gpiod_get_index(dev, "kxcjk1013_int", 0); + if (IS_ERR(gpio)) { + dev_err(dev, "acpi gpio get index failed\n"); + return PTR_ERR(gpio); + } + + ret = gpiod_direction_input(gpio); + if (ret) + return ret; + + ret = gpiod_to_irq(gpio); + + dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret); + + return ret; +} + +static int kxcjk1013_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct kxcjk1013_data *data; + struct iio_dev *indio_dev; + struct iio_trigger *trig = NULL; + struct kxcjk_1013_platform_data *pdata; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + + pdata = dev_get_platdata(&client->dev); + if (pdata) + data-&g |