[PATCH] I2C: Move hwmon drivers (2/3)

Part 2: Move the driver files themselves.

Note that the patch "adds trailing whitespace", because it does move the
files as-is, and some files happen to have trailing whitespace.

From: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

34 files changed, 0 insertions, 25444 deletions

diff --git a/drivers/i2c/chips/adm1021.c b/drivers/i2c/chips/adm1021.c
deleted file mode 100644
index d2c774c32f45..000000000000
--- a/drivers/i2c/chips/adm1021.c
+++ /dev/null
@@ -1,402 +0,0 @@
-/*
-    adm1021.c - Part of lm_sensors, Linux kernel modules for hardware
-             monitoring
-    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> and
-    Philip Edelbrock <phil@netroedge.com>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-
-
-/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
-					0x29, 0x2a, 0x2b,
-					0x4c, 0x4d, 0x4e, 
-					I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
-
-/* Insmod parameters */
-SENSORS_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066);
-
-/* adm1021 constants specified below */
-
-/* The adm1021 registers */
-/* Read-only */
-#define ADM1021_REG_TEMP		0x00
-#define ADM1021_REG_REMOTE_TEMP		0x01
-#define ADM1021_REG_STATUS		0x02
-#define ADM1021_REG_MAN_ID		0x0FE	/* 0x41 = AMD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi*/
-#define ADM1021_REG_DEV_ID		0x0FF	/* ADM1021 = 0x0X, ADM1023 = 0x3X */
-#define ADM1021_REG_DIE_CODE		0x0FF	/* MAX1617A */
-/* These use different addresses for reading/writing */
-#define ADM1021_REG_CONFIG_R		0x03
-#define ADM1021_REG_CONFIG_W		0x09
-#define ADM1021_REG_CONV_RATE_R		0x04
-#define ADM1021_REG_CONV_RATE_W		0x0A
-/* These are for the ADM1023's additional precision on the remote temp sensor */
-#define ADM1021_REG_REM_TEMP_PREC	0x010
-#define ADM1021_REG_REM_OFFSET		0x011
-#define ADM1021_REG_REM_OFFSET_PREC	0x012
-#define ADM1021_REG_REM_TOS_PREC	0x013
-#define ADM1021_REG_REM_THYST_PREC	0x014
-/* limits */
-#define ADM1021_REG_TOS_R		0x05
-#define ADM1021_REG_TOS_W		0x0B
-#define ADM1021_REG_REMOTE_TOS_R	0x07
-#define ADM1021_REG_REMOTE_TOS_W	0x0D
-#define ADM1021_REG_THYST_R		0x06
-#define ADM1021_REG_THYST_W		0x0C
-#define ADM1021_REG_REMOTE_THYST_R	0x08
-#define ADM1021_REG_REMOTE_THYST_W	0x0E
-/* write-only */
-#define ADM1021_REG_ONESHOT		0x0F
-
-
-/* Conversions. Rounding and limit checking is only done on the TO_REG
-   variants. Note that you should be a bit careful with which arguments
-   these macros are called: arguments may be evaluated more than once.
-   Fixing this is just not worth it. */
-/* Conversions  note: 1021 uses normal integer signed-byte format*/
-#define TEMP_FROM_REG(val)	(val > 127 ? (val-256)*1000 : val*1000)
-#define TEMP_TO_REG(val)	(SENSORS_LIMIT((val < 0 ? (val/1000)+256 : val/1000),0,255))
-
-/* Initial values */
-
-/* Note: Even though I left the low and high limits named os and hyst, 
-they don't quite work like a thermostat the way the LM75 does.  I.e., 
-a lower temp than THYST actually triggers an alarm instead of 
-clearing it.  Weird, ey?   --Phil  */
-
-/* Each client has this additional data */
-struct adm1021_data {
-	struct i2c_client client;
-	enum chips type;
-
-	struct semaphore update_lock;
-	char valid;		/* !=0 if following fields are valid */
-	unsigned long last_updated;	/* In jiffies */
-
-	u8	temp_max;	/* Register values */
-	u8	temp_hyst;
-	u8	temp_input;
-	u8	remote_temp_max;
-	u8	remote_temp_hyst;
-	u8	remote_temp_input;
-	u8	alarms;
-        /* Special values for ADM1023 only */
-	u8	remote_temp_prec;
-	u8	remote_temp_os_prec;
-	u8	remote_temp_hyst_prec;
-	u8	remote_temp_offset;
-	u8	remote_temp_offset_prec;
-};
-
-static int adm1021_attach_adapter(struct i2c_adapter *adapter);
-static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind);
-static void adm1021_init_client(struct i2c_client *client);
-static int adm1021_detach_client(struct i2c_client *client);
-static int adm1021_read_value(struct i2c_client *client, u8 reg);
-static int adm1021_write_value(struct i2c_client *client, u8 reg,
-			       u16 value);
-static struct adm1021_data *adm1021_update_device(struct device *dev);
-
-/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
-static int read_only = 0;
-
-
-/* This is the driver that will be inserted */
-static struct i2c_driver adm1021_driver = {
-	.owner		= THIS_MODULE,
-	.name		= "adm1021",
-	.id		= I2C_DRIVERID_ADM1021,
-	.flags		= I2C_DF_NOTIFY,
-	.attach_adapter	= adm1021_attach_adapter,
-	.detach_client	= adm1021_detach_client,
-};
-
-#define show(value)	\
-static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf)		\
-{									\
-	struct adm1021_data *data = adm1021_update_device(dev);		\
-	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value));	\
-}
-show(temp_max);
-show(temp_hyst);
-show(temp_input);
-show(remote_temp_max);
-show(remote_temp_hyst);
-show(remote_temp_input);
-
-#define show2(value)	\
-static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf)		\
-{									\
-	struct adm1021_data *data = adm1021_update_device(dev);		\
-	return sprintf(buf, "%d\n", data->value);			\
-}
-show2(alarms);
-
-#define set(value, reg)	\
-static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)	\
-{								\
-	struct i2c_client *client = to_i2c_client(dev);		\
-	struct adm1021_data *data = i2c_get_clientdata(client);	\
-	int temp = simple_strtoul(buf, NULL, 10);		\
-								\
-	down(&data->update_lock);				\
-	data->value = TEMP_TO_REG(temp);			\
-	adm1021_write_value(client, reg, data->value);		\
-	up(&data->update_lock);					\
-	return count;						\
-}
-set(temp_max, ADM1021_REG_TOS_W);
-set(temp_hyst, ADM1021_REG_THYST_W);
-set(remote_temp_max, ADM1021_REG_REMOTE_TOS_W);
-set(remote_temp_hyst, ADM1021_REG_REMOTE_THYST_W);
-
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
-static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
-static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL);
-static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_remote_temp_max, set_remote_temp_max);
-static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_remote_temp_hyst, set_remote_temp_hyst);
-static DEVICE_ATTR(temp2_input, S_IRUGO, show_remote_temp_input, NULL);
-static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
-
-
-static int adm1021_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_detect(adapter, &addr_data, adm1021_detect);
-}
-
-static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind)
-{
-	int i;
-	struct i2c_client *new_client;
-	struct adm1021_data *data;
-	int err = 0;
-	const char *type_name = "";
-
-	/* Make sure we aren't probing the ISA bus!! This is just a safety check
-	   at this moment; i2c_detect really won't call us. */
-#ifdef DEBUG
-	if (i2c_is_isa_adapter(adapter)) {
-		dev_dbg(&adapter->dev, "adm1021_detect called for an ISA bus adapter?!?\n");
-		return 0;
-	}
-#endif
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto error0;
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access adm1021_{read,write}_value. */
-
-	if (!(data = kmalloc(sizeof(struct adm1021_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto error0;
-	}
-	memset(data, 0, sizeof(struct adm1021_data));
-
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &adm1021_driver;
-	new_client->flags = 0;
-
-	/* Now, we do the remaining detection. */
-	if (kind < 0) {
-		if ((adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0x03) != 0x00
-		 || (adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x3F) != 0x00
-		 || (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) & 0xF8) != 0x00) {
-			err = -ENODEV;
-			goto error1;
-		}
-	}
-
-	/* Determine the chip type. */
-	if (kind <= 0) {
-		i = adm1021_read_value(new_client, ADM1021_REG_MAN_ID);
-		if (i == 0x41)
-			if ((adm1021_read_value(new_client, ADM1021_REG_DEV_ID) & 0x0F0) == 0x030)
-				kind = adm1023;
-			else
-				kind = adm1021;
-		else if (i == 0x49)
-			kind = thmc10;
-		else if (i == 0x23)
-			kind = gl523sm;
-		else if ((i == 0x4d) &&
-			 (adm1021_read_value(new_client, ADM1021_REG_DEV_ID) == 0x01))
-			kind = max1617a;
-		else if (i == 0x54)
-			kind = mc1066;
-		/* LM84 Mfr ID in a different place, and it has more unused bits */
-		else if (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) == 0x00
-		      && (kind == 0 /* skip extra detection */
-		       || ((adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x7F) == 0x00
-			&& (adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0xAB) == 0x00)))
-			kind = lm84;
-		else
-			kind = max1617;
-	}
-
-	if (kind == max1617) {
-		type_name = "max1617";
-	} else if (kind == max1617a) {
-		type_name = "max1617a";
-	} else if (kind == adm1021) {
-		type_name = "adm1021";
-	} else if (kind == adm1023) {
-		type_name = "adm1023";
-	} else if (kind == thmc10) {
-		type_name = "thmc10";
-	} else if (kind == lm84) {
-		type_name = "lm84";
-	} else if (kind == gl523sm) {
-		type_name = "gl523sm";
-	} else if (kind == mc1066) {
-		type_name = "mc1066";
-	}
-
-	/* Fill in the remaining client fields and put it into the global list */
-	strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
-	data->type = kind;
-	data->valid = 0;
-	init_MUTEX(&data->update_lock);
-
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(new_client)))
-		goto error1;
-
-	/* Initialize the ADM1021 chip */
-	if (kind != lm84)
-		adm1021_init_client(new_client);
-
-	/* Register sysfs hooks */
-	device_create_file(&new_client->dev, &dev_attr_temp1_max);
-	device_create_file(&new_client->dev, &dev_attr_temp1_min);
-	device_create_file(&new_client->dev, &dev_attr_temp1_input);
-	device_create_file(&new_client->dev, &dev_attr_temp2_max);
-	device_create_file(&new_client->dev, &dev_attr_temp2_min);
-	device_create_file(&new_client->dev, &dev_attr_temp2_input);
-	device_create_file(&new_client->dev, &dev_attr_alarms);
-
-	return 0;
-
-error1:
-	kfree(data);
-error0:
-	return err;
-}
-
-static void adm1021_init_client(struct i2c_client *client)
-{
-	/* Enable ADC and disable suspend mode */
-	adm1021_write_value(client, ADM1021_REG_CONFIG_W,
-		adm1021_read_value(client, ADM1021_REG_CONFIG_R) & 0xBF);
-	/* Set Conversion rate to 1/sec (this can be tinkered with) */
-	adm1021_write_value(client, ADM1021_REG_CONV_RATE_W, 0x04);
-}
-
-static int adm1021_detach_client(struct i2c_client *client)
-{
-	int err;
-
-	if ((err = i2c_detach_client(client))) {
-		dev_err(&client->dev, "Client deregistration failed, client not detached.\n");
-		return err;
-	}
-
-	kfree(i2c_get_clientdata(client));
-	return 0;
-}
-
-/* All registers are byte-sized */
-static int adm1021_read_value(struct i2c_client *client, u8 reg)
-{
-	return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int adm1021_write_value(struct i2c_client *client, u8 reg, u16 value)
-{
-	if (!read_only)
-		return i2c_smbus_write_byte_data(client, reg, value);
-	return 0;
-}
-
-static struct adm1021_data *adm1021_update_device(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adm1021_data *data = i2c_get_clientdata(client);
-
-	down(&data->update_lock);
-
-	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
-	    || !data->valid) {
-		dev_dbg(&client->dev, "Starting adm1021 update\n");
-
-		data->temp_input = adm1021_read_value(client, ADM1021_REG_TEMP);
-		data->temp_max = adm1021_read_value(client, ADM1021_REG_TOS_R);
-		data->temp_hyst = adm1021_read_value(client, ADM1021_REG_THYST_R);
-		data->remote_temp_input = adm1021_read_value(client, ADM1021_REG_REMOTE_TEMP);
-		data->remote_temp_max = adm1021_read_value(client, ADM1021_REG_REMOTE_TOS_R);
-		data->remote_temp_hyst = adm1021_read_value(client, ADM1021_REG_REMOTE_THYST_R);
-		data->alarms = adm1021_read_value(client, ADM1021_REG_STATUS) & 0x7c;
-		if (data->type == adm1023) {
-			data->remote_temp_prec = adm1021_read_value(client, ADM1021_REG_REM_TEMP_PREC);
-			data->remote_temp_os_prec = adm1021_read_value(client, ADM1021_REG_REM_TOS_PREC);
-			data->remote_temp_hyst_prec = adm1021_read_value(client, ADM1021_REG_REM_THYST_PREC);
-			data->remote_temp_offset = adm1021_read_value(client, ADM1021_REG_REM_OFFSET);
-			data->remote_temp_offset_prec = adm1021_read_value(client, ADM1021_REG_REM_OFFSET_PREC);
-		}
-		data->last_updated = jiffies;
-		data->valid = 1;
-	}
-
-	up(&data->update_lock);
-
-	return data;
-}
-
-static int __init sensors_adm1021_init(void)
-{
-	return i2c_add_driver(&adm1021_driver);
-}
-
-static void __exit sensors_adm1021_exit(void)
-{
-	i2c_del_driver(&adm1021_driver);
-}
-
-MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl> and "
-		"Philip Edelbrock <phil@netroedge.com>");
-MODULE_DESCRIPTION("adm1021 driver");
-MODULE_LICENSE("GPL");
-
-module_param(read_only, bool, 0);
-MODULE_PARM_DESC(read_only, "Don't set any values, read only mode");
-
-module_init(sensors_adm1021_init)
-module_exit(sensors_adm1021_exit)
diff --git a/drivers/i2c/chips/adm1025.c b/drivers/i2c/chips/adm1025.c
deleted file mode 100644
index e452d0daf906..000000000000
--- a/drivers/i2c/chips/adm1025.c
+++ /dev/null
@@ -1,577 +0,0 @@
-/*
- * adm1025.c
- *
- * Copyright (C) 2000       Chen-Yuan Wu <gwu@esoft.com>
- * Copyright (C) 2003-2004  Jean Delvare <khali@linux-fr.org>
- *
- * The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6
- * voltages (including its own power source) and up to two temperatures
- * (its own plus up to one external one). Voltages are scaled internally
- * (which is not the common way) with ratios such that the nominal value
- * of each voltage correspond to a register value of 192 (which means a
- * resolution of about 0.5% of the nominal value). Temperature values are
- * reported with a 1 deg resolution and a 3 deg accuracy. Complete
- * datasheet can be obtained from Analog's website at:
- *   http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html
- *
- * This driver also supports the ADM1025A, which differs from the ADM1025
- * only in that it has "open-drain VID inputs while the ADM1025 has
- * on-chip 100k pull-ups on the VID inputs". It doesn't make any
- * difference for us.
- *
- * This driver also supports the NE1619, a sensor chip made by Philips.
- * That chip is similar to the ADM1025A, with a few differences. The only
- * difference that matters to us is that the NE1619 has only two possible
- * addresses while the ADM1025A has a third one. Complete datasheet can be
- * obtained from Philips's website at:
- *   http://www.semiconductors.philips.com/pip/NE1619DS.html
- *
- * Since the ADM1025 was the first chipset supported by this driver, most
- * comments will refer to this chipset, but are actually general and
- * concern all supported chipsets, unless mentioned otherwise.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/i2c-sensor.h>
-#include <linux/i2c-vid.h>
-
-/*
- * Addresses to scan
- * ADM1025 and ADM1025A have three possible addresses: 0x2c, 0x2d and 0x2e.
- * NE1619 has two possible addresses: 0x2c and 0x2d.
- */
-
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
-static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
-
-/*
- * Insmod parameters
- */
-
-SENSORS_INSMOD_2(adm1025, ne1619);
-
-/*
- * The ADM1025 registers
- */
-
-#define ADM1025_REG_MAN_ID		0x3E
-#define ADM1025_REG_CHIP_ID 		0x3F
-#define ADM1025_REG_CONFIG		0x40
-#define ADM1025_REG_STATUS1		0x41
-#define ADM1025_REG_STATUS2		0x42
-#define ADM1025_REG_IN(nr)		(0x20 + (nr))
-#define ADM1025_REG_IN_MAX(nr)		(0x2B + (nr) * 2)
-#define ADM1025_REG_IN_MIN(nr)		(0x2C + (nr) * 2)
-#define ADM1025_REG_TEMP(nr)		(0x26 + (nr))
-#define ADM1025_REG_TEMP_HIGH(nr)	(0x37 + (nr) * 2)
-#define ADM1025_REG_TEMP_LOW(nr)	(0x38 + (nr) * 2)
-#define ADM1025_REG_VID			0x47
-#define ADM1025_REG_VID4		0x49
-
-/*
- * Conversions and various macros
- * The ADM1025 uses signed 8-bit values for temperatures.
- */
-
-static int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 };
-
-#define IN_FROM_REG(reg,scale)	(((reg) * (scale) + 96) / 192)
-#define IN_TO_REG(val,scale)	((val) <= 0 ? 0 : \
-				 (val) * 192 >= (scale) * 255 ? 255 : \
-				 ((val) * 192 + (scale)/2) / (scale))
-
-#define TEMP_FROM_REG(reg)	((reg) * 1000)
-#define TEMP_TO_REG(val)	((val) <= -127500 ? -128 : \
-				 (val) >= 126500 ? 127 : \
-				 (((val) < 0 ? (val)-500 : (val)+500) / 1000))
-
-/*
- * Functions declaration
- */
-
-static int adm1025_attach_adapter(struct i2c_adapter *adapter);
-static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind);
-static void adm1025_init_client(struct i2c_client *client);
-static int adm1025_detach_client(struct i2c_client *client);
-static struct adm1025_data *adm1025_update_device(struct device *dev);
-
-/*
- * Driver data (common to all clients)
- */
-
-static struct i2c_driver adm1025_driver = {
-	.owner		= THIS_MODULE,
-	.name		= "adm1025",
-	.id		= I2C_DRIVERID_ADM1025,
-	.flags		= I2C_DF_NOTIFY,
-	.attach_adapter	= adm1025_attach_adapter,
-	.detach_client	= adm1025_detach_client,
-};
-
-/*
- * Client data (each client gets its own)
- */
-
-struct adm1025_data {
-	struct i2c_client client;
-	struct semaphore update_lock;
-	char valid; /* zero until following fields are valid */
-	unsigned long last_updated; /* in jiffies */
-
-	u8 in[6];		/* register value */
-	u8 in_max[6];		/* register value */
-	u8 in_min[6];		/* register value */
-	s8 temp[2];		/* register value */
-	s8 temp_min[2];		/* register value */
-	s8 temp_max[2];		/* register value */
-	u16 alarms;		/* register values, combined */
-	u8 vid;			/* register values, combined */
-	u8 vrm;
-};
-
-/*
- * Sysfs stuff
- */
-
-#define show_in(offset) \
-static ssize_t show_in##offset(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
-	struct adm1025_data *data = adm1025_update_device(dev); \
-	return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \
-		       in_scale[offset])); \
-} \
-static ssize_t show_in##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
-	struct adm1025_data *data = adm1025_update_device(dev); \
-	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \
-		       in_scale[offset])); \
-} \
-static ssize_t show_in##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
-	struct adm1025_data *data = adm1025_update_device(dev); \
-	return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \
-		       in_scale[offset])); \
-} \
-static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL);
-show_in(0);
-show_in(1);
-show_in(2);
-show_in(3);
-show_in(4);
-show_in(5);
-
-#define show_temp(offset) \
-static ssize_t show_temp##offset(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
-	struct adm1025_data *data = adm1025_update_device(dev); \
-	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \
-} \
-static ssize_t show_temp##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
-	struct adm1025_data *data = adm1025_update_device(dev); \
-	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[offset-1])); \
-} \
-static ssize_t show_temp##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
-	struct adm1025_data *data = adm1025_update_device(dev); \
-	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[offset-1])); \
-}\
-static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp##offset, NULL);
-show_temp(1);
-show_temp(2);
-
-#define set_in(offset) \
-static ssize_t set_in##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
-	size_t count) \
-{ \
-	struct i2c_client *client = to_i2c_client(dev); \
-	struct adm1025_data *data = i2c_get_clientdata(client); \
-	long val = simple_strtol(buf, NULL, 10); \
- \
-	down(&data->update_lock); \
-	data->in_min[offset] = IN_TO_REG(val, in_scale[offset]); \
-	i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MIN(offset), \
-				  data->in_min[offset]); \
-	up(&data->update_lock); \
-	return count; \
-} \
-static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
-	size_t count) \
-{ \
-	struct i2c_client *client = to_i2c_client(dev); \
-	struct adm1025_data *data = i2c_get_clientdata(client); \
-	long val = simple_strtol(buf, NULL, 10); \
- \
-	down(&data->update_lock); \
-	data->in_max[offset] = IN_TO_REG(val, in_scale[offset]); \
-	i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MAX(offset), \
-				  data->in_max[offset]); \
-	up(&data->update_lock); \
-	return count; \
-} \
-static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
-	show_in##offset##_min, set_in##offset##_min); \
-static DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \
-	show_in##offset##_max, set_in##offset##_max);
-set_in(0);
-set_in(1);
-set_in(2);
-set_in(3);
-set_in(4);
-set_in(5);
-
-#define set_temp(offset) \
-static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
-	size_t count) \
-{ \
-	struct i2c_client *client = to_i2c_client(dev); \
-	struct adm1025_data *data = i2c_get_clientdata(client); \
-	long val = simple_strtol(buf, NULL, 10); \
- \
-	down(&data->update_lock); \
-	data->temp_min[offset-1] = TEMP_TO_REG(val); \
-	i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_LOW(offset-1), \
-				  data->temp_min[offset-1]); \
-	up(&data->update_lock); \
-	return count; \
-} \
-static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
-	size_t count) \
-{ \
-	struct i2c_client *client = to_i2c_client(dev); \
-	struct adm1025_data *data = i2c_get_clientdata(client); \
-	long val = simple_strtol(buf, NULL, 10); \
- \
-	down(&data->update_lock); \
-	data->temp_max[offset-1] = TEMP_TO_REG(val); \
-	i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_HIGH(offset-1), \
-				  data->temp_max[offset-1]); \
-	up(&data->update_lock); \
-	return count; \
-} \
-static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
-	show_temp##offset##_min, set_temp##offset##_min); \
-static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
-	show_temp##offset##_max, set_temp##offset##_max);
-set_temp(1);
-set_temp(2);
-
-static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct adm1025_data *data = adm1025_update_device(dev);
-	return sprintf(buf, "%u\n", data->alarms);
-}
-static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
-
-static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct adm1025_data *data = adm1025_update_device(dev);
-	return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
-}
-/* in1_ref is deprecated in favour of cpu0_vid, remove after 2005-11-11 */
-static DEVICE_ATTR(in1_ref, S_IRUGO, show_vid, NULL);
-static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
-
-static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct adm1025_data *data = adm1025_update_device(dev);
-	return sprintf(buf, "%u\n", data->vrm);
-}
-static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct adm1025_data *data = i2c_get_clientdata(client);
-	data->vrm = simple_strtoul(buf, NULL, 10);
-	return count;
-}
-static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
-
-/*
- * Real code
- */
-
-static int adm1025_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_detect(adapter, &addr_data, adm1025_detect);
-}
-
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
-{
-	struct i2c_client *new_client;
-	struct adm1025_data *data;
-	int err = 0;
-	const char *name = "";
-	u8 config;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto exit;
-
-	if (!(data = kmalloc(sizeof(struct adm1025_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-	memset(data, 0, sizeof(struct adm1025_data));
-
-	/* The common I2C client data is placed right before the
-	   ADM1025-specific data. */
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &adm1025_driver;
-	new_client->flags = 0;
-
-	/*
-	 * Now we do the remaining detection. A negative kind means that
-	 * the driver was loaded with no force parameter (default), so we
-	 * must both detect and identify the chip. A zero kind means that
-	 * the driver was loaded with the force parameter, the detection
-	 * step shall be skipped. A positive kind means that the driver
-	 * was loaded with the force parameter and a given kind of chip is
-	 * requested, so both the detection and the identification steps
-	 * are skipped.
-	 */
-	config = i2c_smbus_read_byte_data(new_client, ADM1025_REG_CONFIG);
-	if (kind < 0) { /* detection */
-		if ((config & 0x80) != 0x00
-		 || (i2c_smbus_read_byte_data(new_client,
-		     ADM1025_REG_STATUS1) & 0xC0) != 0x00
-		 || (i2c_smbus_read_byte_data(new_client,
-		     ADM1025_REG_STATUS2) & 0xBC) != 0x00) {
-			dev_dbg(&adapter->dev,
-				"ADM1025 detection failed at 0x%02x.\n",
-				address);
-			goto exit_free;
-		}
-	}
-
-	if (kind <= 0) { /* identification */
-		u8 man_id, chip_id;