Merge branch 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "Here is the 4.9 pull request from I2C including:

   - centralized error messages when registering to the core
   - improved lockdep annotations to prevent false positives
   - DT support for muxes, gates, and arbitrators
   - bus speeds can now be obtained from ACPI
   - i2c-octeon got refactored and now supports ThunderX SoCs, too
   - i2c-tegra and i2c-designware got a bigger bunch of updates
   - a couple of standard driver fixes and improvements"

* 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (71 commits)
  i2c: axxia: disable clks in case of failure in probe
  i2c: octeon: thunderx: Limit register access retries
  i2c: uniphier-f: fix misdetection of incomplete STOP condition
  gpio: pca953x: variable 'id' was used twice
  i2c: i801: Add support for Kaby Lake PCH-H
  gpio: pca953x: fix an incorrect lockdep warning
  i2c: add a warning to i2c_adapter_depth()
  lockdep: make MAX_LOCKDEP_SUBCLASSES unconditionally visible
  i2c: export i2c_adapter_depth()
  i2c: rk3x: Fix variable 'min_total_ns' unused warning
  i2c: rk3x: Fix sparse warning
  i2c / ACPI: Do not touch an I2C device if it belongs to another adapter
  i2c: octeon: Fix high-level controller status check
  i2c: octeon: Avoid sending STOP during recovery
  i2c: octeon: Fix set SCL recovery function
  i2c: rcar: add support for r8a7796 (R-Car M3-W)
  i2c: imx: make bus recovery through pinctrl optional
  i2c: meson: add gxbb compatible string
  i2c: uniphier-f: set the adapter to master mode when probing
  i2c: uniphier-f: avoid WARN_ON() of clk_disable() in failure path
  ...

68 files changed, 1904 insertions, 1296 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 5c3993b26129..6d94e2ec5b4f 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -836,7 +836,7 @@ config I2C_SH7760
 config I2C_SH_MOBILE
 	tristate "SuperH Mobile I2C Controller"
 	depends on HAS_DMA
-	depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+	depends on ARCH_SHMOBILE || ARCH_RENESAS || COMPILE_TEST
 	help
 	  If you say yes to this option, support will be included for the
 	  built-in I2C interface on the Renesas SH-Mobile processor.
@@ -956,6 +956,17 @@ config I2C_OCTEON
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-octeon.
 
+config I2C_THUNDERX
+	tristate "Cavium ThunderX I2C bus support"
+	depends on 64BIT && PCI && (ARM64 || COMPILE_TEST)
+	select I2C_SMBUS
+	help
+	  Say yes if you want to support the I2C serial bus on Cavium
+	  ThunderX SOC.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-thunderx.
+
 config I2C_XILINX
 	tristate "Xilinx I2C Controller"
 	depends on HAS_IOMEM
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 37f2819b4560..29764cc20a44 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -91,7 +91,10 @@ obj-$(CONFIG_I2C_UNIPHIER)	+= i2c-uniphier.o
 obj-$(CONFIG_I2C_UNIPHIER_F)	+= i2c-uniphier-f.o
 obj-$(CONFIG_I2C_VERSATILE)	+= i2c-versatile.o
 obj-$(CONFIG_I2C_WMT)		+= i2c-wmt.o
+i2c-octeon-objs := i2c-octeon-core.o i2c-octeon-platdrv.o
 obj-$(CONFIG_I2C_OCTEON)	+= i2c-octeon.o
+i2c-thunderx-objs := i2c-octeon-core.o i2c-thunderx-pcidrv.o
+obj-$(CONFIG_I2C_THUNDERX)	+= i2c-thunderx.o
 obj-$(CONFIG_I2C_XILINX)	+= i2c-xiic.o
 obj-$(CONFIG_I2C_XLR)		+= i2c-xlr.o
 obj-$(CONFIG_I2C_XLP9XX)	+= i2c-xlp9xx.o
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 6c7113d990f8..274908cd1fde 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -378,11 +378,8 @@ static int amd756_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		 amd756_ioport);
 
 	error = i2c_add_adapter(&amd756_smbus);
-	if (error) {
-		dev_err(&pdev->dev,
-			"Adapter registration failed, module not inserted\n");
+	if (error)
 		goto out_err;
-	}
 
 	return 0;
 
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 1bb97f658b47..0b86c6173e07 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -1122,8 +1122,6 @@ static int at91_twi_probe(struct platform_device *pdev)
 
 	rc = i2c_add_numbered_adapter(&dev->adapter);
 	if (rc) {
-		dev_err(dev->dev, "Adapter %s registration failed\n",
-			dev->adapter.name);
 		clk_disable_unprepare(dev->clk);
 
 		pm_runtime_disable(dev->dev);
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index c335cc7852f9..4351a9343058 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -545,7 +545,11 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	clk_prepare_enable(idev->i2c_clk);
+	ret = clk_prepare_enable(idev->i2c_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		return ret;
+	}
 
 	i2c_set_adapdata(&idev->adapter, idev);
 	strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name));
@@ -560,7 +564,7 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_adapter(&idev->adapter);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to add adapter\n");
+		clk_disable_unprepare(idev->i2c_clk);
 		return ret;
 	}
 
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 95f7cac76f89..326b3db02c48 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -488,13 +488,7 @@ static int bcm_iproc_i2c_probe(struct platform_device *pdev)
 	adap->dev.parent = &pdev->dev;
 	adap->dev.of_node = pdev->dev.of_node;
 
-	ret = i2c_add_adapter(adap);
-	if (ret) {
-		dev_err(iproc_i2c->device, "failed to add adapter\n");
-		return ret;
-	}
-
-	return 0;
+	return i2c_add_adapter(adap);
 }
 
 static int bcm_iproc_i2c_remove(struct platform_device *pdev)
diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
index 258cb9a40ab3..4e489a9d16fb 100644
--- a/drivers/i2c/busses/i2c-bcm-kona.c
+++ b/drivers/i2c/busses/i2c-bcm-kona.c
@@ -858,10 +858,8 @@ static int bcm_kona_i2c_probe(struct platform_device *pdev)
 	adap->dev.of_node = pdev->dev.of_node;
 
 	rc = i2c_add_adapter(adap);
-	if (rc) {
-		dev_err(dev->device, "failed to add adapter\n");
+	if (rc)
 		return rc;
-	}
 
 	dev_info(dev->device, "device registered successfully\n");
 
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 025686d41640..29d00c4f7824 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -685,10 +685,8 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 	write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
 
 	rc = i2c_add_numbered_adapter(p_adap);
-	if (rc < 0) {
-		dev_err(&pdev->dev, "Can't add i2c adapter!\n");
+	if (rc < 0)
 		goto out_error;
-	}
 
 	platform_set_drvdata(pdev, iface);
 
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index 385b57bfcb38..0652281662a8 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -648,10 +648,8 @@ static int brcmstb_i2c_probe(struct platform_device *pdev)
 	adap->dev.parent = &pdev->dev;
 	adap->dev.of_node = pdev->dev.of_node;
 	rc = i2c_add_adapter(adap);
-	if (rc) {
-		dev_err(dev->device, "failed to add adapter\n");
+	if (rc)
 		goto probe_errorout;
-	}
 
 	dev_info(dev->device, "%s@%dhz registered in %s mode\n",
 		 int_name ? int_name : " ", dev->clk_freq_hz,
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 3c16a2f7c673..686971263bef 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -963,10 +963,8 @@ static int cdns_i2c_probe(struct platform_device *pdev)
 	}
 
 	ret = i2c_add_adapter(&id->adap);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "reg adap failed: %d\n", ret);
+	if (ret < 0)
 		goto err_clk_dis;
-	}
 
 	/*
 	 * Cadence I2C controller has a bug wherein it generates
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index ee57c1e865e2..d89bde2c5da2 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -665,10 +665,8 @@ static int cpm_i2c_probe(struct platform_device *ofdev)
 	cpm->adap.nr = (data && len == 4) ? be32_to_cpup(data) : -1;
 	result = i2c_add_numbered_adapter(&cpm->adap);
 
-	if (result < 0) {
-		dev_err(&ofdev->dev, "Unable to register with I2C\n");
+	if (result < 0)
 		goto out_shut;
-	}
 
 	dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
 		cpm->adap.name);
diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
index 2d5ff86398d0..9b36a7b3befd 100644
--- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
+++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
@@ -281,10 +281,8 @@ static int ec_i2c_probe(struct platform_device *pdev)
 	bus->adap.retries = I2C_MAX_RETRIES;
 
 	err = i2c_add_adapter(&bus->adap);
-	if (err) {
-		dev_err(dev, "cannot register i2c adapter\n");
+	if (err)
 		return err;
-	}
 	platform_set_drvdata(pdev, bus);
 
 	return err;
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index a8bdcb5292f5..9e7ef5cf5d49 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -846,10 +846,8 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 
 	adap->nr = pdev->id;
 	r = i2c_add_numbered_adapter(adap);
-	if (r) {
-		dev_err(&pdev->dev, "failure adding adapter\n");
+	if (r)
 		goto err_unuse_clocks;
-	}
 
 	return 0;
 
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index fcd973d5131e..1fe93c43215c 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -42,6 +42,8 @@
 #define DW_IC_SS_SCL_LCNT	0x18
 #define DW_IC_FS_SCL_HCNT	0x1c
 #define DW_IC_FS_SCL_LCNT	0x20
+#define DW_IC_HS_SCL_HCNT	0x24
+#define DW_IC_HS_SCL_LCNT	0x28
 #define DW_IC_INTR_STAT		0x2c
 #define DW_IC_INTR_MASK		0x30
 #define DW_IC_RAW_INTR_STAT	0x34
@@ -89,12 +91,17 @@
 					 DW_IC_INTR_TX_ABRT | \
 					 DW_IC_INTR_STOP_DET)
 
-#define DW_IC_STATUS_ACTIVITY	0x1
+#define DW_IC_STATUS_ACTIVITY		0x1
+#define DW_IC_STATUS_TFE		BIT(2)
+#define DW_IC_STATUS_MST_ACTIVITY	BIT(5)
 
 #define DW_IC_ERR_TX_ABRT	0x1
 
 #define DW_IC_TAR_10BITADDR_MASTER BIT(12)
 
+#define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH	(BIT(2) | BIT(3))
+#define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK	GENMASK(3, 2)
+
 /*
  * status codes
  */
@@ -252,10 +259,15 @@ static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
 
 static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
 {
+	dw_writel(dev, enable, DW_IC_ENABLE);
+}
+
+static void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable)
+{
 	int timeout = 100;
 
 	do {
-		dw_writel(dev, enable, DW_IC_ENABLE);
+		__i2c_dw_enable(dev, enable);
 		if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable)
 			return;
 
@@ -282,6 +294,28 @@ static unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
 	return dev->get_clk_rate_khz(dev);
 }
 
+static int i2c_dw_acquire_lock(struct dw_i2c_dev *dev)
+{
+	int ret;
+
+	if (!dev->acquire_lock)
+		return 0;
+
+	ret = dev->acquire_lock(dev);
+	if (!ret)
+		return 0;
+
+	dev_err(dev->dev, "couldn't acquire bus ownership\n");
+
+	return ret;
+}
+
+static void i2c_dw_release_lock(struct dw_i2c_dev *dev)
+{
+	if (dev->release_lock)
+		dev->release_lock(dev);
+}
+
 /**
  * i2c_dw_init() - initialize the designware i2c master hardware
  * @dev: device private data
@@ -293,17 +327,13 @@ static unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
 int i2c_dw_init(struct dw_i2c_dev *dev)
 {
 	u32 hcnt, lcnt;
-	u32 reg;
+	u32 reg, comp_param1;
 	u32 sda_falling_time, scl_falling_time;
 	int ret;
 
-	if (dev->acquire_lock) {
-		ret = dev->acquire_lock(dev);
-		if (ret) {
-			dev_err(dev->dev, "couldn't acquire bus ownership\n");
-			return ret;
-		}
-	}
+	ret = i2c_dw_acquire_lock(dev);
+	if (ret)
+		return ret;
 
 	reg = dw_readl(dev, DW_IC_COMP_TYPE);
 	if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
@@ -315,13 +345,14 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 	} else if (reg != DW_IC_COMP_TYPE_VALUE) {
 		dev_err(dev->dev, "Unknown Synopsys component type: "
 			"0x%08x\n", reg);
-		if (dev->release_lock)
-			dev->release_lock(dev);
+		i2c_dw_release_lock(dev);
 		return -ENODEV;
 	}
 
+	comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
+
 	/* Disable the adapter */
-	__i2c_dw_enable(dev, false);
+	__i2c_dw_enable_and_wait(dev, false);
 
 	/* set standard and fast speed deviders for high/low periods */
 
@@ -347,8 +378,11 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 	dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
 	dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
 
-	/* Set SCL timing parameters for fast-mode */
-	if (dev->fs_hcnt && dev->fs_lcnt) {
+	/* Set SCL timing parameters for fast-mode or fast-mode plus */
+	if ((dev->clk_freq == 1000000) && dev->fp_hcnt && dev->fp_lcnt) {
+		hcnt = dev->fp_hcnt;
+		lcnt = dev->fp_lcnt;
+	} else if (dev->fs_hcnt && dev->fs_lcnt) {
 		hcnt = dev->fs_hcnt;
 		lcnt = dev->fs_lcnt;
 	} else {
@@ -366,6 +400,23 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 	dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
 	dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
 
+	if ((dev->master_cfg & DW_IC_CON_SPEED_MASK) ==
+		DW_IC_CON_SPEED_HIGH) {
+		if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK)
+			!= DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) {
+			dev_err(dev->dev, "High Speed not supported!\n");
+			dev->master_cfg &= ~DW_IC_CON_SPEED_MASK;
+			dev->master_cfg |= DW_IC_CON_SPEED_FAST;
+		} else if (dev->hs_hcnt && dev->hs_lcnt) {
+			hcnt = dev->hs_hcnt;
+			lcnt = dev->hs_lcnt;
+			dw_writel(dev, hcnt, DW_IC_HS_SCL_HCNT);
+			dw_writel(dev, lcnt, DW_IC_HS_SCL_LCNT);
+			dev_dbg(dev->dev, "HighSpeed-mode HCNT:LCNT = %d:%d\n",
+				hcnt, lcnt);
+		}
+	}
+
 	/* Configure SDA Hold Time if required */
 	reg = dw_readl(dev, DW_IC_COMP_VERSION);
 	if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
@@ -387,8 +438,8 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 	/* configure the i2c master */
 	dw_writel(dev, dev->master_cfg , DW_IC_CON);
 
-	if (dev->release_lock)
-		dev->release_lock(dev);
+	i2c_dw_release_lock(dev);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(i2c_dw_init);
@@ -415,27 +466,45 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
 static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 {
 	struct i2c_msg *msgs = dev->msgs;
-	u32 ic_con, ic_tar = 0;
+	u32 ic_tar = 0;
+	bool enabled;
 
-	/* Disable the adapter */
-	__i2c_dw_enable(dev, false);
+	enabled = dw_readl(dev, DW_IC_ENABLE_STATUS) & 1;
+
+	if (enabled) {
+		u32 ic_status;
+
+		/*
+		 * Only disable adapter if ic_tar and ic_con can't be
+		 * dynamically updated
+		 */
+		ic_status = dw_readl(dev, DW_IC_STATUS);
+		if (!dev->dynamic_tar_update_enabled ||
+		    (ic_status & DW_IC_STATUS_MST_ACTIVITY) ||
+		    !(ic_status & DW_IC_STATUS_TFE)) {
+			__i2c_dw_enable_and_wait(dev, false);
+			enabled = false;
+		}
+	}
 
 	/* if the slave address is ten bit address, enable 10BITADDR */
-	ic_con = dw_readl(dev, DW_IC_CON);
-	if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) {
-		ic_con |= DW_IC_CON_10BITADDR_MASTER;
+	if (dev->dynamic_tar_update_enabled) {
 		/*
 		 * If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing
-		 * mode has to be enabled via bit 12 of IC_TAR register.
-		 * We set it always as I2C_DYNAMIC_TAR_UPDATE can't be
-		 * detected from registers.
+		 * mode has to be enabled via bit 12 of IC_TAR register,
+		 * otherwise bit 4 of IC_CON is used.
 		 */
-		ic_tar = DW_IC_TAR_10BITADDR_MASTER;
+		if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
+			ic_tar = DW_IC_TAR_10BITADDR_MASTER;
 	} else {
-		ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
-	}
+		u32 ic_con = dw_readl(dev, DW_IC_CON);
 
-	dw_writel(dev, ic_con, DW_IC_CON);
+		if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
+			ic_con |= DW_IC_CON_10BITADDR_MASTER;
+		else
+			ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
+		dw_writel(dev, ic_con, DW_IC_CON);
+	}
 
 	/*
 	 * Set the slave (target) address and enable 10-bit addressing mode
@@ -446,8 +515,8 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 	/* enforce disabled interrupts (due to HW issues) */
 	i2c_dw_disable_int(dev);
 
-	/* Enable the adapter */
-	__i2c_dw_enable(dev, true);
+	if (!enabled)
+		__i2c_dw_enable(dev, true);
 
 	/* Clear and enable interrupts */
 	dw_readl(dev, DW_IC_CLR_INTR);
@@ -628,7 +697,8 @@ static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
 }
 
 /*
- * Prepare controller for a transaction and call i2c_dw_xfer_msg
+ * Prepare controller for a transaction and start transfer by calling
+ * i2c_dw_xfer_init()
  */
 static int
 i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
@@ -651,13 +721,9 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	dev->abort_source = 0;
 	dev->rx_outstanding = 0;
 
-	if (dev->acquire_lock) {
-		ret = dev->acquire_lock(dev);
-		if (ret) {
-			dev_err(dev->dev, "couldn't acquire bus ownership\n");
-			goto done_nolock;
-		}
-	}<