Merge tag 'hwmon-for-linus-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - drivers for MAX31785 and MAX6621

 - support for AMD family 17h (Ryzen, Threadripper) temperature sensors

 - various driver cleanups and minor improvements

* tag 'hwmon-for-linus-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (30 commits)
  dt-bindings: pmbus: Add Maxim MAX31785 documentation
  pmbus: Add driver for Maxim MAX31785 Intelligent Fan Controller
  hwmon: (aspeed-pwm-tacho) Sort headers
  hwmon: (xgene) Minor clean up of ifdef and acpi_match_table reference
  hwmon: (max6621) Inverted if condition in max6621_read()
  hwmon: (asc7621) remove redundant assignment to newval
  hwmon: (xgene) Support hwmon v2
  hwmon: (gpio-fan) Fix null pointer dereference at probe
  hwmon: (gpio-fan) Convert to use GPIO descriptors
  hwmon: (gpio-fan) Rename GPIO line state variables
  hwmon: (gpio-fan) Get rid of the gpio alarm struct
  hwmon: (gpio-fan) Get rid of platform data struct
  hwmon: (gpio-fan) Mandate OF_GPIO and cut pdata path
  hwmon: (gpio-fan) Send around device pointer
  hwmon: (gpio-fan) Localize platform data
  hwmon: (gpio-fan) Use local variable pointers
  hwmon: (gpio-fan) Move DT bindings to the right place
  Documentation: devicetree: add max6621 device
  hwmon: (max6621) Add support for Maxim MAX6621 temperature sensor
  hwmon: (w83793) make const array watchdog_minors static, reduces object code size
  ...

17 files changed, 1034 insertions, 320 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index d65431417b17..7ad017690e3a 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -552,6 +552,7 @@ config SENSORS_G762
 
 config SENSORS_GPIO_FAN
 	tristate "GPIO fan"
+	depends on OF_GPIO
 	depends on GPIOLIB || COMPILE_TEST
 	depends on THERMAL || THERMAL=n
 	help
@@ -862,6 +863,20 @@ tristate "MAX31722 temperature sensor"
 	  This driver can also be built as a module. If so, the module
 	  will be called max31722.
 
+config SENSORS_MAX6621
+	tristate "Maxim MAX6621 sensor chip"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for MAX6621 sensor chip.
+	  MAX6621 is a PECI-to-I2C translator provides an efficient,
+	  low-cost solution for PECI-to-SMBus/I2C protocol conversion.
+	  It allows reading the temperature from the PECI-compliant
+	  host directly from up to four PECI-enabled CPUs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called max6621.
+
 config SENSORS_MAX6639
 	tristate "Maxim MAX6639 sensor chip"
 	depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 23e195a5a2f3..0fe489fab663 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -118,6 +118,7 @@ obj-$(CONFIG_SENSORS_MAX1619)	+= max1619.o
 obj-$(CONFIG_SENSORS_MAX1668)	+= max1668.o
 obj-$(CONFIG_SENSORS_MAX197)	+= max197.o
 obj-$(CONFIG_SENSORS_MAX31722)	+= max31722.o
+obj-$(CONFIG_SENSORS_MAX6621)	+= max6621.o
 obj-$(CONFIG_SENSORS_MAX6639)	+= max6639.o
 obj-$(CONFIG_SENSORS_MAX6642)	+= max6642.o
 obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o
diff --git a/drivers/hwmon/asc7621.c b/drivers/hwmon/asc7621.c
index 4875e99b59c9..6d34c05a4f83 100644
--- a/drivers/hwmon/asc7621.c
+++ b/drivers/hwmon/asc7621.c
@@ -579,7 +579,6 @@ static ssize_t show_pwm_enable(struct device *dev,
 	mutex_unlock(&data->update_lock);
 
 	val = config | (altbit << 3);
-	newval = 0;
 
 	if (val == 3 || val >= 10)
 		newval = 255;
diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c
index 69b97d45e3cb..63a95e23ca81 100644
--- a/drivers/hwmon/aspeed-pwm-tacho.c
+++ b/drivers/hwmon/aspeed-pwm-tacho.c
@@ -7,19 +7,19 @@
  */
 
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/gpio/consumer.h>
-#include <linux/delay.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/of_platform.h>
 #include <linux/of_device.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
-#include <linux/sysfs.h>
 #include <linux/regmap.h>
+#include <linux/sysfs.h>
 #include <linux/thermal.h>
 
 /* ASPEED PWM & FAN Tach Register Definition */
@@ -161,7 +161,7 @@
  * 11: reserved.
  */
 #define M_TACH_MODE 0x02 /* 10b */
-#define M_TACH_UNIT 0x00c0
+#define M_TACH_UNIT 0x0210
 #define INIT_FAN_CTRL 0xFF
 
 /* How long we sleep in us while waiting for an RPM result. */
diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index 9c355b9d31c5..5c9a52599cf6 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -29,21 +29,24 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/hwmon.h>
-#include <linux/gpio.h>
-#include <linux/gpio-fan.h>
+#include <linux/gpio/consumer.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/of_gpio.h>
 #include <linux/thermal.h>
 
+struct gpio_fan_speed {
+	int rpm;
+	int ctrl_val;
+};
+
 struct gpio_fan_data {
-	struct platform_device	*pdev;
+	struct device		*dev;
 	struct device		*hwmon_dev;
 	/* Cooling device if any */
 	struct thermal_cooling_device *cdev;
 	struct mutex		lock; /* lock GPIOs operations. */
-	int			num_ctrl;
-	unsigned		*ctrl;
+	int			num_gpios;
+	struct gpio_desc	**gpios;
 	int			num_speed;
 	struct gpio_fan_speed	*speed;
 	int			speed_index;
@@ -51,7 +54,7 @@ struct gpio_fan_data {
 	int			resume_speed;
 #endif
 	bool			pwm_enable;
-	struct gpio_fan_alarm	*alarm;
+	struct gpio_desc	*alarm_gpio;
 	struct work_struct	alarm_work;
 };
 
@@ -64,8 +67,8 @@ static void fan_alarm_notify(struct work_struct *ws)
 	struct gpio_fan_data *fan_data =
 		container_of(ws, struct gpio_fan_data, alarm_work);
 
-	sysfs_notify(&fan_data->pdev->dev.kobj, NULL, "fan1_alarm");
-	kobject_uevent(&fan_data->pdev->dev.kobj, KOBJ_CHANGE);
+	sysfs_notify(&fan_data->dev->kobj, NULL, "fan1_alarm");
+	kobject_uevent(&fan_data->dev->kobj, KOBJ_CHANGE);
 }
 
 static irqreturn_t fan_alarm_irq_handler(int irq, void *dev_id)
@@ -81,47 +84,30 @@ static ssize_t fan1_alarm_show(struct device *dev,
 			       struct device_attribute *attr, char *buf)
 {
 	struct gpio_fan_data *fan_data = dev_get_drvdata(dev);
-	struct gpio_fan_alarm *alarm = fan_data->alarm;
-	int value = gpio_get_value_cansleep(alarm->gpio);
 
-	if (alarm->active_low)
-		value = !value;
-
-	return sprintf(buf, "%d\n", value);
+	return sprintf(buf, "%d\n",
+		       gpiod_get_value_cansleep(fan_data->alarm_gpio));
 }
 
 static DEVICE_ATTR_RO(fan1_alarm);
 
-static int fan_alarm_init(struct gpio_fan_data *fan_data,
-			  struct gpio_fan_alarm *alarm)
+static int fan_alarm_init(struct gpio_fan_data *fan_data)
 {
-	int err;
 	int alarm_irq;
-	struct platform_device *pdev = fan_data->pdev;
-
-	fan_data->alarm = alarm;
-
-	err = devm_gpio_request(&pdev->dev, alarm->gpio, "GPIO fan alarm");
-	if (err)
-		return err;
-
-	err = gpio_direction_input(alarm->gpio);
-	if (err)
-		return err;
+	struct device *dev = fan_data->dev;
 
 	/*
 	 * If the alarm GPIO don't support interrupts, just leave
 	 * without initializing the fail notification support.
 	 */
-	alarm_irq = gpio_to_irq(alarm->gpio);
-	if (alarm_irq < 0)
+	alarm_irq = gpiod_to_irq(fan_data->alarm_gpio);
+	if (alarm_irq <= 0)
 		return 0;
 
 	INIT_WORK(&fan_data->alarm_work, fan_alarm_notify);
 	irq_set_irq_type(alarm_irq, IRQ_TYPE_EDGE_BOTH);
-	err = devm_request_irq(&pdev->dev, alarm_irq, fan_alarm_irq_handler,
-			       IRQF_SHARED, "GPIO fan alarm", fan_data);
-	return err;
+	return devm_request_irq(dev, alarm_irq, fan_alarm_irq_handler,
+				IRQF_SHARED, "GPIO fan alarm", fan_data);
 }
 
 /*
@@ -133,8 +119,9 @@ static void __set_fan_ctrl(struct gpio_fan_data *fan_data, int ctrl_val)
 {
 	int i;
 
-	for (i = 0; i < fan_data->num_ctrl; i++)
-		gpio_set_value_cansleep(fan_data->ctrl[i], (ctrl_val >> i) & 1);
+	for (i = 0; i < fan_data->num_gpios; i++)
+		gpiod_set_value_cansleep(fan_data->gpios[i],
+					 (ctrl_val >> i) & 1);
 }
 
 static int __get_fan_ctrl(struct gpio_fan_data *fan_data)
@@ -142,10 +129,10 @@ static int __get_fan_ctrl(struct gpio_fan_data *fan_data)
 	int i;
 	int ctrl_val = 0;
 
-	for (i = 0; i < fan_data->num_ctrl; i++) {
+	for (i = 0; i < fan_data->num_gpios; i++) {
 		int value;
 
-		value = gpio_get_value_cansleep(fan_data->ctrl[i]);
+		value = gpiod_get_value_cansleep(fan_data->gpios[i]);
 		ctrl_val |= (value << i);
 	}
 	return ctrl_val;
@@ -170,7 +157,7 @@ static int get_fan_speed_index(struct gpio_fan_data *fan_data)
 		if (fan_data->speed[i].ctrl_val == ctrl_val)
 			return i;
 
-	dev_warn(&fan_data->pdev->dev,
+	dev_warn(fan_data->dev,
 		 "missing speed array entry for GPIO value 0x%x\n", ctrl_val);
 
 	return -ENODEV;
@@ -328,9 +315,9 @@ static umode_t gpio_fan_is_visible(struct kobject *kobj,
 	struct device *dev = container_of(kobj, struct device, kobj);
 	struct gpio_fan_data *data = dev_get_drvdata(dev);
 
-	if (index == 0 && !data->alarm)
+	if (index == 0 && !data->alarm_gpio)
 		return 0;
-	if (index > 0 && !data->ctrl)
+	if (index > 0 && !data->gpios)
 		return 0;
 
 	return attr->mode;
@@ -358,30 +345,25 @@ static const struct attribute_group *gpio_fan_groups[] = {
 	NULL
 };
 
-static int fan_ctrl_init(struct gpio_fan_data *fan_data,
-			 struct gpio_fan_platform_data *pdata)
+static int fan_ctrl_init(struct gpio_fan_data *fan_data)
 {
-	struct platform_device *pdev = fan_data->pdev;
-	int num_ctrl = pdata->num_ctrl;
-	unsigned *ctrl = pdata->ctrl;
+	int num_gpios = fan_data->num_gpios;
+	struct gpio_desc **gpios = fan_data->gpios;
 	int i, err;
 
-	for (i = 0; i < num_ctrl; i++) {
-		err = devm_gpio_request(&pdev->dev, ctrl[i],
-					"GPIO fan control");
-		if (err)
-			return err;
-
-		err = gpio_direction_output(ctrl[i],
-					    gpio_get_value_cansleep(ctrl[i]));
+	for (i = 0; i < num_gpios; i++) {
+		/*
+		 * The GPIO descriptors were retrieved with GPIOD_ASIS so here
+		 * we set the GPIO into output mode, carefully preserving the
+		 * current value by setting it to whatever it is already set
+		 * (no surprise changes in default fan speed).
+		 */
+		err = gpiod_direction_output(gpios[i],
+					gpiod_get_value_cansleep(gpios[i]));
 		if (err)
 			return err;
 	}
 
-	fan_data->num_ctrl = num_ctrl;
-	fan_data->ctrl = ctrl;
-	fan_data->num_speed = pdata->num_speed;
-	fan_data->speed = pdata->speed;
 	fan_data->pwm_enable = true; /* Enable manual fan speed control. */
 	fan_data->speed_index = get_fan_speed_index(fan_data);
 	if (fan_data->speed_index < 0)
@@ -432,67 +414,47 @@ static const struct thermal_cooling_device_ops gpio_fan_cool_ops = {
 	.set_cur_state = gpio_fan_set_cur_state,
 };
 
-#ifdef CONFIG_OF_GPIO
 /*
  * Translate OpenFirmware node properties into platform_data
  */
-static int gpio_fan_get_of_pdata(struct device *dev,
-			    struct gpio_fan_platform_data *pdata)
+static int gpio_fan_get_of_data(struct gpio_fan_data *fan_data)
 {
-	struct device_node *node;
 	struct gpio_fan_speed *speed;
-	unsigned *ctrl;
+	struct device *dev = fan_data->dev;
+	struct device_node *np = dev->of_node;
+	struct gpio_desc **gpios;
 	unsigned i;
 	u32 u;
 	struct property *prop;
 	const __be32 *p;
 
-	node = dev->of_node;
-
 	/* Alarm GPIO if one exists */
-	if (of_gpio_named_count(node, "alarm-gpios") > 0) {
-		struct gpio_fan_alarm *alarm;
-		int val;
-		enum of_gpio_flags flags;
-
-		alarm = devm_kzalloc(dev, sizeof(struct gpio_fan_alarm),
-					GFP_KERNEL);
-		if (!alarm)
-			return -ENOMEM;
-
-		val = of_get_named_gpio_flags(node, "alarm-gpios", 0, &flags);
-		if (val < 0)
-			return val;
-		alarm->gpio = val;
-		alarm->active_low = flags & OF_GPIO_ACTIVE_LOW;
-
-		pdata->alarm = alarm;
-	}
+	fan_data->alarm_gpio = devm_gpiod_get_optional(dev, "alarm", GPIOD_IN);
+	if (IS_ERR(fan_data->alarm_gpio))
+		return PTR_ERR(fan_data->alarm_gpio);
 
 	/* Fill GPIO pin array */
-	pdata->num_ctrl = of_gpio_count(node);
-	if (pdata->num_ctrl <= 0) {
-		if (pdata->alarm)
+	fan_data->num_gpios = gpiod_count(dev, NULL);
+	if (fan_data->num_gpios <= 0) {
+		if (fan_data->alarm_gpio)
 			return 0;
 		dev_err(dev, "DT properties empty / missing");
 		return -ENODEV;
 	}
-	ctrl = devm_kzalloc(dev, pdata->num_ctrl * sizeof(unsigned),
-				GFP_KERNEL);
-	if (!ctrl)
+	gpios = devm_kzalloc(dev,
+			     fan_data->num_gpios * sizeof(struct gpio_desc *),
+			     GFP_KERNEL);
+	if (!gpios)
 		return -ENOMEM;
-	for (i = 0; i < pdata->num_ctrl; i++) {
-		int val;
-
-		val = of_get_gpio(node, i);
-		if (val < 0)
-			return val;
-		ctrl[i] = val;
+	for (i = 0; i < fan_data->num_gpios; i++) {
+		gpios[i] = devm_gpiod_get_index(dev, NULL, i, GPIOD_ASIS);
+		if (IS_ERR(gpios[i]))
+			return PTR_ERR(gpios[i]);
 	}
-	pdata->ctrl = ctrl;
+	fan_data->gpios = gpios;
 
 	/* Get number of RPM/ctrl_val pairs in speed map */
-	prop = of_find_property(node, "gpio-fan,speed-map", &i);
+	prop = of_find_property(np, "gpio-fan,speed-map", &i);
 	if (!prop) {
 		dev_err(dev, "gpio-fan,speed-map DT property missing");
 		return -ENODEV;
@@ -502,7 +464,7 @@ static int gpio_fan_get_of_pdata(struct device *dev,
 		dev_err(dev, "gpio-fan,speed-map contains zero/odd number of entries");
 		return -ENODEV;
 	}
-	pdata->num_speed = i / 2;
+	fan_data->num_speed = i / 2;
 
 	/*
 	 * Populate speed map
@@ -510,12 +472,12 @@ static int gpio_fan_get_of_pdata(struct device *dev,
 	 * this needs splitting into pairs to create gpio_fan_speed structs
 	 */
 	speed = devm_kzalloc(dev,
-			pdata->num_speed * sizeof(struct gpio_fan_speed),
+			fan_data->num_speed * sizeof(struct gpio_fan_speed),
 			GFP_KERNEL);
 	if (!speed)
 		return -ENOMEM;
 	p = NULL;
-	for (i = 0; i < pdata->num_speed; i++) {
+	for (i = 0; i < fan_data->num_speed; i++) {
 		p = of_prop_next_u32(prop, p, &u);
 		if (!p)
 			return -ENODEV;
@@ -525,7 +487,7 @@ static int gpio_fan_get_of_pdata(struct device *dev,
 			return -ENODEV;
 		speed[i].ctrl_val = u;
 	}
-	pdata->speed = speed;
+	fan_data->speed = speed;
 
 	return 0;
 }
@@ -535,76 +497,58 @@ static const struct of_device_id of_gpio_fan_match[] = {
 	{},
 };
 MODULE_DEVICE_TABLE(of, of_gpio_fan_match);
-#endif /* CONFIG_OF_GPIO */
 
 static int gpio_fan_probe(struct platform_device *pdev)
 {
 	int err;
 	struct gpio_fan_data *fan_data;
-	struct gpio_fan_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
 
-	fan_data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_fan_data),
+	fan_data = devm_kzalloc(dev, sizeof(struct gpio_fan_data),
 				GFP_KERNEL);
 	if (!fan_data)
 		return -ENOMEM;
 
-#ifdef CONFIG_OF_GPIO
-	if (!pdata) {
-		pdata = devm_kzalloc(&pdev->dev,
-					sizeof(struct gpio_fan_platform_data),
-					GFP_KERNEL);
-		if (!pdata)
-			return -ENOMEM;
-
-		err = gpio_fan_get_of_pdata(&pdev->dev, pdata);
-		if (err)
-			return err;
-	}
-#else /* CONFIG_OF_GPIO */
-	if (!pdata)
-		return -EINVAL;
-#endif /* CONFIG_OF_GPIO */
+	fan_data->dev = dev;
+	err = gpio_fan_get_of_data(fan_data);
+	if (err)
+		return err;
 
-	fan_data->pdev = pdev;
 	platform_set_drvdata(pdev, fan_data);
 	mutex_init(&fan_data->lock);
 
 	/* Configure alarm GPIO if available. */
-	if (pdata->alarm) {
-		err = fan_alarm_init(fan_data, pdata->alarm);
+	if (fan_data->alarm_gpio) {
+		err = fan_alarm_init(fan_data);
 		if (err)
 			return err;
 	}
 
 	/* Configure control GPIOs if available. */
-	if (pdata->ctrl && pdata->num_ctrl > 0) {
-		if (!pdata->speed || pdata->num_speed <= 1)
+	if (fan_data->gpios && fan_data->num_gpios > 0) {
+		if (!fan_data->speed || fan_data->num_speed <= 1)
 			return -EINVAL;
-		err = fan_ctrl_init(fan_data, pdata);
+		err = fan_ctrl_init(fan_data);
 		if (err)
 			return err;
 	}
 
 	/* Make this driver part of hwmon class. */
 	fan_data->hwmon_dev =
-		devm_hwmon_device_register_with_groups(&pdev->dev,
+		devm_hwmon_device_register_with_groups(dev,
 						       "gpio_fan", fan_data,
 						       gpio_fan_groups);
 	if (IS_ERR(fan_data->hwmon_dev))
 		return PTR_ERR(fan_data->hwmon_dev);
-#ifdef CONFIG_OF_GPIO
+
 	/* Optional cooling device register for Device tree platforms */
-	fan_data->cdev = thermal_of_cooling_device_register(pdev->dev.of_node,
+	fan_data->cdev = thermal_of_cooling_device_register(np,
 							    "gpio-fan",
 							    fan_data,
 							    &gpio_fan_cool_ops);
-#else /* CONFIG_OF_GPIO */
-	/* Optional cooling device register for non Device tree platforms */
-	fan_data->cdev = thermal_cooling_device_register("gpio-fan", fan_data,
-							 &gpio_fan_cool_ops);
-#endif /* CONFIG_OF_GPIO */
 
-	dev_info(&pdev->dev, "GPIO fan initialized\n");
+	dev_info(dev, "GPIO fan initialized\n");
 
 	return 0;
 }
@@ -616,7 +560,7 @@ static int gpio_fan_remove(struct platform_device *pdev)
 	if (!IS_ERR(fan_data->cdev))
 		thermal_cooling_device_unregister(fan_data->cdev);
 
-	if (fan_data->ctrl)
+	if (fan_data->gpios)
 		set_fan_speed(fan_data, 0);
 
 	return 0;
@@ -632,7 +576,7 @@ static int gpio_fan_suspend(struct device *dev)
 {
 	struct gpio_fan_data *fan_data = dev_get_drvdata(dev);
 
-	if (fan_data->ctrl) {
+	if (fan_data->gpios) {
 		fan_data->resume_speed = fan_data->speed_index;
 		set_fan_speed(fan_data, 0);
 	}
@@ -644,7 +588,7 @@ static int gpio_fan_resume(struct device *dev)
 {
 	struct gpio_fan_data *fan_data = dev_get_drvdata(dev);
 
-	if (fan_data->ctrl)
+	if (fan_data->gpios)
 		set_fan_speed(fan_data, fan_data->resume_speed);
 
 	return 0;
@@ -663,9 +607,7 @@ static struct platform_driver gpio_fan_driver = {
 	.driver	= {
 		.name	= "gpio-fan",
 		.pm	= GPIO_FAN_PM,
-#ifdef CONFIG_OF_GPIO
 		.of_match_table = of_match_ptr(of_gpio_fan_match),
-#endif
 	},
 };
 
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index ce3b91f22e30..46a54ed23410 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -36,6 +36,10 @@ MODULE_PARM_DESC(force, "force loading on processors with erratum 319");
 /* Provide lock for writing to NB_SMU_IND_ADDR */
 static DEFINE_MUTEX(nb_smu_ind_mutex);
 
+#ifndef PCI_DEVICE_ID_AMD_17H_DF_F3
+#define PCI_DEVICE_ID_AMD_17H_DF_F3	0x1463
+#endif
+
 /* CPUID function 0x80000001, ebx */
 #define CPUID_PKGTYPE_MASK	0xf0000000
 #define CPUID_PKGTYPE_F		0x00000000
@@ -61,31 +65,72 @@ static DEFINE_MUTEX(nb_smu_ind_mutex);
  */
 #define F15H_M60H_REPORTED_TEMP_CTRL_OFFSET	0xd8200ca4
 
-static void amd_nb_smu_index_read(struct pci_dev *pdev, unsigned int devfn,
-				  int offset, u32 *val)
+/* F17h M01h Access througn SMN */
+#define F17H_M01H_REPORTED_TEMP_CTRL_OFFSET	0x00059800
+
+struct k10temp_data {
+	struct pci_dev *pdev;
+	void (*read_tempreg)(struct pci_dev *pdev, u32 *regval);
+	int temp_offset;
+};
+
+struct tctl_offset {
+	u8 model;
+	char const *id;
+	int offset;
+};
+
+static const struct tctl_offset tctl_offset_table[] = {
+	{ 0x17, "AMD Ryzen 7 1600X", 20000 },
+	{ 0x17, "AMD Ryzen 7 1700X", 20000 },
+	{ 0x17, "AMD Ryzen 7 1800X", 20000 },
+	{ 0x17, "AMD Ryzen Threadripper 1950X", 27000 },
+	{ 0x17, "AMD Ryzen Threadripper 1920X", 27000 },
+	{ 0x17, "AMD Ryzen Threadripper 1950", 10000 },
+	{ 0x17, "AMD Ryzen Threadripper 1920", 10000 },
+	{ 0x17, "AMD Ryzen Threadripper 1910", 10000 },
+};
+
+static void read_tempreg_pci(struct pci_dev *pdev, u32 *regval)
+{
+	pci_read_config_dword(pdev, REG_REPORTED_TEMPERATURE, regval);
+}
+
+static void amd_nb_index_read(struct pci_dev *pdev, unsigned int devfn,
+			      unsigned int base, int offset, u32 *val)
 {
 	mutex_lock(&nb_smu_ind_mutex);
 	pci_bus_write_config_dword(pdev->bus, devfn,
-				   0xb8, offset);
+				   base, offset);
 	pci_bus_read_config_dword(pdev->bus, devfn,
-				  0xbc, val);
+				  base + 4, val);
 	mutex_unlock(&nb_smu_ind_mutex);
 }
 
+static void read_tempreg_nb_f15(struct pci_dev *pdev, u32 *regval)
+{
+	amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8,
+			  F15H_M60H_REPORTED_TEMP_CTRL_OFFSET, regval);
+}
+
+static void read_tempreg_nb_f17(struct pci_dev *pdev, u32 *regval)
+{
+	amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0x60,
+			  F17H_M01H_REPORTED_TEMP_CTRL_OFFSET, regval);
+}
+
 static ssize_t temp1_input_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
+	struct k10temp_data *data = dev_get_drvdata(dev);
 	u32 regval;
-	struct pci_dev *pdev = dev_get_drvdata(dev);
-
-	if (boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model == 0x60) {
-		amd_nb_smu_index_read(pdev, PCI_DEVFN(0, 0),
-				      F15H_M60H_REPORTED_TEMP_CTRL_OFFSET,
-				      &regval);
-	} else {
-		pci_read_config_dword(pdev, REG_REPORTED_TEMPERATURE, &regval);
-	}
-	return sprintf(buf, "%u\n", (regval >> 21) * 125);
+	unsigned int temp;
+
+	data->read_tempreg(data->pdev, &regval);
+	temp = (regval >> 21) * 125;
+	temp -= data->temp_offset;
+
+	return sprintf(buf, "%u\n", temp);
 }
 
 static ssize_t temp1_max_show(struct device *dev,
@@ -98,11 +143,12 @@ static ssize_t show_temp_crit(struct device *dev,
 			      struct device_attribute *devattr, char *buf)
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct k10temp_data *data = dev_get_drvdata(dev);
 	int show_hyst = attr->index;
 	u32 regval;
 	int value;
 
-	pci_read_config_dword(dev_get_drvdata(dev),
+	pci_read_config_dword(data->pdev,
 			      REG_HARDWARE_THERMAL_CONTROL, &regval);
 	value = ((regval >> 16) & 0x7f) * 500 + 52000;
 	if (show_hyst)
@@ -119,7 +165,8 @@ static umode_t k10temp_is_visible(struct kobject *kobj,
 				  struct attribute *attr, int index)
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
-	struct pci_dev *pdev = dev_get_drvdata(dev);
+	struct k10temp_data *data = dev_get_drvdata(dev);
+	struct pci_dev *pdev = data->pdev;
 
 	if (index >= 2) {
 		u32 reg_caps, reg_htc;
@@ -187,7 +234,9 @@ static int k10temp_probe(struct pci_dev *pdev,
 {
 	int unreliable = has_erratum_319(pdev);
 	struct device *dev = &pdev->dev;
+	struct k10temp_data *data;
 	struct device *hwmon_dev;
+	int i;
 
 	if (unreliable) {
 		if (!force) {
@@ -199,7 +248,31 @@ static int k10temp_probe(struct pci_dev *pdev,
 			 "unreliable CPU thermal sensor; check erratum 319\n");
 	}
 
-	hwmon_dev = devm_hwmon_device_register_with_groups(dev, "k10temp", pdev,
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->pdev = pdev;
+
+	if (boot_cpu_data.x86 == 0x15 && (boot_cpu_data.x86_model == 0x60 ||
+					  boot_cpu_data.x86_model == 0x70))
+		data->read_tempreg = read_tempreg_nb_f15;
+	else if (boot_cpu_data.x86 == 0x17)
+		data->read_tempreg = read_tempreg_nb_f17;
+	else
+		data->read_tempreg = read_tempreg_pci;
+
+	for (i = 0; i < ARRAY_SIZE(tctl_offset_table); i++) {
+		const struct tctl_offset *entry = &tctl_offset_table[i];
+
+		if (boot_cpu_data.x86 == entry->model &&
+		    strstr(boot_cpu_data.x86_model_id, entry->id)) {
+			data->temp_offset = entry->offset;
+			break;
+		}
+	}
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, "k10temp", data,
 							   k10temp_groups);
 	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
@@ -214,6 +287,7 @@ static const struct pci_device_id k10temp_id_table[] = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_DF_F3) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, k10temp_id_table);
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index a18278938494..76d966932941 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -303,10 +303,20 @@ static const struct i2c_device_id max1619_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, max1619_id);
 
+#ifdef CONFIG_OF
+static const struct of_device_id max1619_of_match[] = {
+	{ .compatible = "maxim,max1619", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, max1619_of_match);
+#endif
+
 static struct i2c_driver max1619_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "max1619",
+		.of_match_table = of_match_ptr(max1619_of_match),
 	},
 	.probe		= max1619_probe,
 	.id_table	= max1619_id,
diff --git a/drivers/hwmon/max6621.c b/drivers/hwmon/max6621.c
new file mode 100644
index 000000000000..35555f0eefb9
--- /dev/null
+++ b/drivers/hwmon/max6621.c
@@ -0,0 +1,593 @@
+/*
+ * Hardware monitoring driver for Maxim MAX6621
+ *
+ * Copyright (c) 2017 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2017 Vadim Pasternak <vadimp@mellanox.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#define MAX6621_DRV_NAME		"max6621"
+#define MAX6621_TEMP_INPUT_REG_NUM	9
+#define MAX6621_TEMP_INPUT_MIN		-127000
+#define MAX6621_TEMP_INPUT_MAX		128000
+#define MAX6621_TEMP_ALERT_CHAN_SHIFT	1
+
+#define MAX6621_TEMP_S0D0_REG		0x00
+#define MAX6621_TEMP_S0D1_REG		0x01
+#define MAX6621_TEMP_S1D0_REG		0x02
+#define MAX6621_TEMP_S1D1_REG		0x03
+#define MAX6621_TEMP_S2D0_REG		0x04
+#define MAX6621_TEMP_S2D1_REG		0x05
+#define MAX6621_TEMP_S3D0_REG		0x06
+#define MAX6621_TEMP_S3D1_REG		0x07
+#define MAX6621_TEMP_MAX_REG		0x08
+#define MAX6621_TEMP_MAX_ADDR_REG	0x0a
+#define MAX6621_TEMP_ALERT_CAUSE_REG	0x0b
+#define MAX6621_CONFIG0_REG		0x0c
+#define MAX6621_CONFIG1_REG		0x0d
+#define MAX6621_CONFIG2_REG		0x0e
+#define MAX6621_CONFIG3_REG		0x0f
+#define MAX6621_TEMP_S0_ALERT_REG	0x10
+#define MAX6621_TEMP_S1_ALERT_REG	0x11
+#define MAX6621_TEMP_S2_ALERT_REG	0x12
+#define MAX6621_TEMP_S3_ALERT_REG	0x13
+#define MAX6621_CLEAR_ALERT_REG		0x15
+#define MAX6621_REG_MAX			(MAX6621_CLEAR_ALERT_REG + 1)
+#define MAX6621_REG_TEMP_SHIFT		0x06
+
+#define MAX6621_ENABLE_TEMP_ALERTS_BIT	4
+#define MAX6621_ENABLE_I2C_CRC_BIT	5
+#define MAX6621_ENABLE_ALTERNATE_DATA	6
+#define MAX6621_ENABLE_LOCKUP_TO	7
+#define MAX6621_ENABLE_S0D0_BIT		8
+#define MAX6621_ENABLE_S3D1_BIT		15
+#define MAX6621_ENABLE_TEMP_ALL		GENMASK(MAX6621_ENABLE_S3D1_BIT, \
+						MAX6621_ENABLE_S0D0_BIT)
+#define MAX6621_POLL_DELAY_MASK		0x5
+#define MAX6621_CONFIG0_INIT		(MAX6621_ENABLE_TEMP_ALL | \
+					 BIT(MAX6621_ENABLE_LOCKUP_TO) | \
+					 BIT(MAX6621_ENABLE_I2C_CRC_BIT) | \
+					 MAX6621_POLL_DELAY_MASK)
+#define MAX6621_PECI_BIT_TIME		0x2
+#define MAX6621_PECI_RETRY_NUM		0x3
+#define MAX6621_CONFIG1_INIT		((MAX6621_PECI_BIT_TIME << 8) | \
+					 MAX6621_PECI_RETRY_NUM)
+
+/* Error codes */
+#define MAX6621_TRAN_FAILED	0x8100	/*
+					 * PECI transaction failed for more
+					 * than the configured number of
+					 * consecutive retries.
+					 */
+#define MAX6621_POOL_DIS	0x8101	/*
+					 * Polling disabled for requested
+					 * socket/domain.
+					 */
+#define MAX6621_POOL_UNCOMPLETE	0x8102	/*
+					 * First poll not yet completed for
+					 * requested socket/domain (on
+					 * startup).
+					 */
+#define MAX6621_SD_DIS		0x8103	/*
+					 * Read maximum temperature requested,
+					 * but no sockets/domains enabled or
+					 * all enabled sockets/domains have
+					 * errors; or read maximum temperature
+					 * address requested, but read maximum
+					 * temperature was not called.
+					 */
+#define MAX6621_ALERT_DIS	0x8104	/*
+					 * Get alert socket/domain requested,
+					 * but no alert active.
+					 */
+#define MAX6621_PECI_ERR_MIN	0x8000	/* Intel spec PECI error min value. */
+#define MAX6621_PECI_ERR_MAX	0x80ff	/* Intel spec PECI error max value. */
+
+static const u32 max6621_temp_regs[] = {
+	MAX6621_TEMP_MAX_REG, MAX6621_TEMP_S0D0_REG, MAX6621_TEMP_S1D0_REG,
+	MAX6621_TEMP_S2D0_REG, MAX6621_TEMP_S3D0_REG, MAX6621_TEMP_S0D1_REG,
+	MAX6621_TEMP_S1D1_REG, MAX6621_TEMP_S2D1_REG, MAX6621_TEMP_S3D1_REG,
+};
+
+static const char *const max6621_temp_labels[] = {
+	"maximum",
+	"socket0_0",
+	"socket1_0",
+	"socket2_0",
+	"socket3_0",
+	"socket0_1",
+	"socket1_1",
+	"socket2_1",
+	"socket3_1",
+};
+
+static const int max6621_temp_alert_chan2reg[] = {
+	MAX6621_TEMP_S0_ALERT_REG,
+	MAX6621_TEMP_S1_ALERT_REG,
+	MAX6621_TEMP_S2_ALERT_REG,
+	MAX6621_TEMP_S3_ALERT_REG,
+};
+
+/**
+ * struct max6621_data - private data:
+ *
+ * @client: I2C client;
+ * @regmap: register map handle;
+ * @input_chan2reg: mapping from channel to register;
+ */
+struct max6621_data {
+	struct i2c_client	*client;
+	struct regmap		*regmap;
+	int			input_chan2reg[MAX6621_TEMP_INPUT_REG_NUM + 1];
+};
+
+static long max6621_temp_mc2reg(long val)
+{
+	return (val / 1000L) << MAX6621_REG_TEMP_SHIFT;
+}
+
+static umode_t
+max6621_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr,
+		   int channel)
+{
+	/* Skip channels which are not physically conncted. */
+	if (((struct max6621_data *)data)->input_chan2reg[channel] < 0)
+		return 0;
+
+	switch (type) {
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_input:
+		case hwmon_temp_label:
+		case hwmon_temp_crit_alarm:
+			return 0444;
+		case hwmon_temp_offset:
+		case hwmon_temp_crit:
+			return 0644;
+		default:
+			break;
+		}
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int max6621_verify_reg_data(struct device *dev, int regval)
+{
+	if (regval >= MAX6621_PECI_ERR_MIN &&
+	    regval <= MAX6621_PECI_ERR_MAX) {
+		dev_dbg(dev, "PECI error code - err 0x%04x.\n",
+			regval);
+
+		return -EIO;
+	}<