diff options
author | Paul Kocialkowski <contact@paulk.fr> | 2018-11-07 19:18:38 +0100 |
---|---|---|
committer | Maxime Ripard <maxime.ripard@bootlin.com> | 2018-11-09 08:31:28 +0100 |
commit | 65bf2d54f062474d43834cebbf48ff03c4b00080 (patch) | |
tree | ba66971e44d5f57df6ba521f364cad34ddfb6bf9 /drivers/gpu/drm/sun4i/sun4i_tcon.c | |
parent | 4843c9a208c05662811cbd0e3a0fd3e43a0ae965 (diff) |
drm/sun4i: tcon: Support an active-low DE signal with RGB interface
Some panels need an active-low data enable (DE) signal for the RGB
interface. This requires flipping a bit in the TCON0 polarity register
when setting up the mode for the RGB interface.
Match the associated bus flag and use it to set the polarity inversion
bit for the DE signal when required.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-4-contact@paulk.fr
Diffstat (limited to 'drivers/gpu/drm/sun4i/sun4i_tcon.c')
-rw-r--r-- | drivers/gpu/drm/sun4i/sun4i_tcon.c | 7 |
1 files changed, 6 insertions, 1 deletions
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 262ffb6b0f82..0420f5c978b9 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -543,6 +543,9 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, if (mode->flags & DRM_MODE_FLAG_PVSYNC) val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE; + if (display_info.bus_flags & DRM_BUS_FLAG_DE_LOW) + val |= SUN4I_TCON0_IO_POL_DE_NEGATIVE; + /* * On A20 and similar SoCs, the only way to achieve Positive Edge * (Rising Edge), is setting dclk clock phase to 2/3(240°). @@ -565,7 +568,9 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, clk_set_phase(tcon->dclk, 0); regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG, - SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | SUN4I_TCON0_IO_POL_VSYNC_POSITIVE, + SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | + SUN4I_TCON0_IO_POL_VSYNC_POSITIVE | + SUN4I_TCON0_IO_POL_DE_NEGATIVE, val); /* Map output pins to channel 0 */ |