diff options
author | Chanwoo Choi <cw00.choi@samsung.com> | 2015-11-23 23:58:17 +0900 |
---|---|---|
committer | MyungJoo Ham <myungjoo.ham@samsung.com> | 2016-05-03 11:20:09 +0900 |
commit | bfcd6204871cf63e6833b87cdcfe47d7d2da8a29 (patch) | |
tree | 1949b9180d4884ce28c4f73f71fa56fa7b15eafd /drivers/devfreq/exynos/exynos5_bus.c | |
parent | 38279cac36397477d14edf84eff77c8454bc259a (diff) |
PM / devfreq: exynos: Remove unused exynos4/5 busfreq driver
This patch removes the unused exynos4/5 busfreq driver. Instead,
generic exynos-bus frequency driver support the all Exynos SoCs.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Diffstat (limited to 'drivers/devfreq/exynos/exynos5_bus.c')
-rw-r--r-- | drivers/devfreq/exynos/exynos5_bus.c | 431 |
1 files changed, 0 insertions, 431 deletions
diff --git a/drivers/devfreq/exynos/exynos5_bus.c b/drivers/devfreq/exynos/exynos5_bus.c deleted file mode 100644 index 297ea30d4159..000000000000 --- a/drivers/devfreq/exynos/exynos5_bus.c +++ /dev/null @@ -1,431 +0,0 @@ -/* - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS5 INT clock frequency scaling support using DEVFREQ framework - * Based on work done by Jonghwan Choi <jhbird.choi@samsung.com> - * Support for only EXYNOS5250 is present. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/devfreq.h> -#include <linux/io.h> -#include <linux/pm_opp.h> -#include <linux/slab.h> -#include <linux/suspend.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/pm_qos.h> -#include <linux/regulator/consumer.h> -#include <linux/of_address.h> -#include <linux/of_platform.h> - -#include "exynos_ppmu.h" - -#define MAX_SAFEVOLT 1100000 /* 1.10V */ -/* Assume that the bus is saturated if the utilization is 25% */ -#define INT_BUS_SATURATION_RATIO 25 - -enum int_level_idx { - LV_0, - LV_1, - LV_2, - LV_3, - LV_4, - _LV_END -}; - -enum exynos_ppmu_list { - PPMU_RIGHT, - PPMU_END, -}; - -struct busfreq_data_int { - struct device *dev; - struct devfreq *devfreq; - struct regulator *vdd_int; - struct busfreq_ppmu_data ppmu_data; - unsigned long curr_freq; - bool disabled; - - struct notifier_block pm_notifier; - struct mutex lock; - struct pm_qos_request int_req; - struct clk *int_clk; -}; - -struct int_bus_opp_table { - unsigned int idx; - unsigned long clk; - unsigned long volt; -}; - -static struct int_bus_opp_table exynos5_int_opp_table[] = { - {LV_0, 266000, 1025000}, - {LV_1, 200000, 1025000}, - {LV_2, 160000, 1025000}, - {LV_3, 133000, 1025000}, - {LV_4, 100000, 1025000}, - {0, 0, 0}, -}; - -static int exynos5_int_setvolt(struct busfreq_data_int *data, - unsigned long volt) -{ - return regulator_set_voltage(data->vdd_int, volt, MAX_SAFEVOLT); -} - -static int exynos5_busfreq_int_target(struct device *dev, unsigned long *_freq, - u32 flags) -{ - int err = 0; - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct busfreq_data_int *data = platform_get_drvdata(pdev); - struct dev_pm_opp *opp; - unsigned long old_freq, freq; - unsigned long volt; - - rcu_read_lock(); - opp = devfreq_recommended_opp(dev, _freq, flags); - if (IS_ERR(opp)) { - rcu_read_unlock(); - dev_err(dev, "%s: Invalid OPP.\n", __func__); - return PTR_ERR(opp); - } - - freq = dev_pm_opp_get_freq(opp); - volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - - old_freq = data->curr_freq; - - if (old_freq == freq) - return 0; - - dev_dbg(dev, "targeting %lukHz %luuV\n", freq, volt); - - mutex_lock(&data->lock); - - if (data->disabled) - goto out; - - if (freq > exynos5_int_opp_table[0].clk) - pm_qos_update_request(&data->int_req, freq * 16 / 1000); - else - pm_qos_update_request(&data->int_req, -1); - - if (old_freq < freq) - err = exynos5_int_setvolt(data, volt); - if (err) - goto out; - - err = clk_set_rate(data->int_clk, freq * 1000); - - if (err) - goto out; - - if (old_freq > freq) - err = exynos5_int_setvolt(data, volt); - if (err) - goto out; - - data->curr_freq = freq; -out: - mutex_unlock(&data->lock); - return err; -} - -static int exynos5_int_get_dev_status(struct device *dev, - struct devfreq_dev_status *stat) -{ - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct busfreq_data_int *data = platform_get_drvdata(pdev); - struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data; - int busier_dmc; - - exynos_read_ppmu(ppmu_data); - busier_dmc = exynos_get_busier_ppmu(ppmu_data); - - stat->current_frequency = data->curr_freq; - - /* Number of cycles spent on memory access */ - stat->busy_time = ppmu_data->ppmu[busier_dmc].count[PPMU_PMNCNT3]; - stat->busy_time *= 100 / INT_BUS_SATURATION_RATIO; - stat->total_time = ppmu_data->ppmu[busier_dmc].ccnt; - - return 0; -} - -static struct devfreq_dev_profile exynos5_devfreq_int_profile = { - .initial_freq = 160000, - .polling_ms = 100, - .target = exynos5_busfreq_int_target, - .get_dev_status = exynos5_int_get_dev_status, -}; - -static int exynos5250_init_int_tables(struct busfreq_data_int *data) -{ - int i, err = 0; - - for (i = LV_0; i < _LV_END; i++) { - err = dev_pm_opp_add(data->dev, exynos5_int_opp_table[i].clk, - exynos5_int_opp_table[i].volt); - if (err) { - dev_err(data->dev, "Cannot add opp entries.\n"); - return err; - } - } - - return 0; -} - -static int exynos5_busfreq_int_pm_notifier_event(struct notifier_block *this, - unsigned long event, void *ptr) -{ - struct busfreq_data_int *data = container_of(this, - struct busfreq_data_int, pm_notifier); - struct dev_pm_opp *opp; - unsigned long maxfreq = ULONG_MAX; - unsigned long freq; - unsigned long volt; - int err = 0; - - switch (event) { - case PM_SUSPEND_PREPARE: - /* Set Fastest and Deactivate DVFS */ - mutex_lock(&data->lock); - - data->disabled = true; - - rcu_read_lock(); - opp = dev_pm_opp_find_freq_floor(data->dev, &maxfreq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - err = PTR_ERR(opp); - goto unlock; - } - freq = dev_pm_opp_get_freq(opp); - volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - - err = exynos5_int_setvolt(data, volt); - if (err) - goto unlock; - - err = clk_set_rate(data->int_clk, freq * 1000); - - if (err) - goto unlock; - - data->curr_freq = freq; -unlock: - mutex_unlock(&data->lock); - if (err) - return NOTIFY_BAD; - return NOTIFY_OK; - case PM_POST_RESTORE: - case PM_POST_SUSPEND: - /* Reactivate */ - mutex_lock(&data->lock); - data->disabled = false; - mutex_unlock(&data->lock); - return NOTIFY_OK; - } - - return NOTIFY_DONE; -} - -static int exynos5_busfreq_int_probe(struct platform_device *pdev) -{ - struct busfreq_data_int *data; - struct busfreq_ppmu_data *ppmu_data; - struct dev_pm_opp *opp; - struct device *dev = &pdev->dev; - struct device_node *np; - unsigned long initial_freq; - unsigned long initial_volt; - int err = 0; - int i; - - data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data_int), - GFP_KERNEL); - if (data == NULL) { - dev_err(dev, "Cannot allocate memory.\n"); - return -ENOMEM; - } - - ppmu_data = &data->ppmu_data; - ppmu_data->ppmu_end = PPMU_END; - ppmu_data->ppmu = devm_kzalloc(dev, - sizeof(struct exynos_ppmu) * PPMU_END, - GFP_KERNEL); - if (!ppmu_data->ppmu) { - dev_err(dev, "Failed to allocate memory for exynos_ppmu\n"); - return -ENOMEM; - } - - np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-ppmu"); - if (np == NULL) { - pr_err("Unable to find PPMU node\n"); - return -ENOENT; - } - - for (i = 0; i < ppmu_data->ppmu_end; i++) { - /* map PPMU memory region */ - ppmu_data->ppmu[i].hw_base = of_iomap(np, i); - if (ppmu_data->ppmu[i].hw_base == NULL) { - dev_err(&pdev->dev, "failed to map memory region\n"); - return -ENOMEM; - } - } - data->pm_notifier.notifier_call = exynos5_busfreq_int_pm_notifier_event; - data->dev = dev; - mutex_init(&data->lock); - - err = exynos5250_init_int_tables(data); - if (err) - return err; - - data->vdd_int = devm_regulator_get(dev, "vdd_int"); - if (IS_ERR(data->vdd_int)) { - dev_err(dev, "Cannot get the regulator \"vdd_int\"\n"); - return PTR_ERR(data->vdd_int); - } - - data->int_clk = devm_clk_get(dev, "int_clk"); - if (IS_ERR(data->int_clk)) { - dev_err(dev, "Cannot get clock \"int_clk\"\n"); - return PTR_ERR(data->int_clk); - } - - rcu_read_lock(); - opp = dev_pm_opp_find_freq_floor(dev, - &exynos5_devfreq_int_profile.initial_freq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - dev_err(dev, "Invalid initial frequency %lu kHz.\n", - exynos5_devfreq_int_profile.initial_freq); - return PTR_ERR(opp); - } - initial_freq = dev_pm_opp_get_freq(opp); - initial_volt = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - data->curr_freq = initial_freq; - - err = clk_set_rate(data->int_clk, initial_freq * 1000); - if (err) { - dev_err(dev, "Failed to set initial frequency\n"); - return err; - } - - err = exynos5_int_setvolt(data, initial_volt); - if (err) - return err; - - platform_set_drvdata(pdev, data); - - busfreq_mon_reset(ppmu_data); - - data->devfreq = devm_devfreq_add_device(dev, &exynos5_devfreq_int_profile, - "simple_ondemand", NULL); - if (IS_ERR(data->devfreq)) - return PTR_ERR(data->devfreq); - - err = devm_devfreq_register_opp_notifier(dev, data->devfreq); - if (err < 0) { - dev_err(dev, "Failed to register opp notifier\n"); - return err; - } - - err = register_pm_notifier(&data->pm_notifier); - if (err) { - dev_err(dev, "Failed to setup pm notifier\n"); - return err; - } - - /* TODO: Add a new QOS class for int/mif bus */ - pm_qos_add_request(&data->int_req, PM_QOS_NETWORK_THROUGHPUT, -1); - - return 0; -} - -static int exynos5_busfreq_int_remove(struct platform_device *pdev) -{ - struct busfreq_data_int *data = platform_get_drvdata(pdev); - - pm_qos_remove_request(&data->int_req); - unregister_pm_notifier(&data->pm_notifier); - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int exynos5_busfreq_int_resume(struct device *dev) -{ - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct busfreq_data_int *data = platform_get_drvdata(pdev); - struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data; - - busfreq_mon_reset(ppmu_data); - return 0; -} -static const struct dev_pm_ops exynos5_busfreq_int_pm = { - .resume = exynos5_busfreq_int_resume, -}; -#endif -static SIMPLE_DEV_PM_OPS(exynos5_busfreq_int_pm_ops, NULL, - exynos5_busfreq_int_resume); - -/* platform device pointer for exynos5 devfreq device. */ -static struct platform_device *exynos5_devfreq_pdev; - -static struct platform_driver exynos5_busfreq_int_driver = { - .probe = exynos5_busfreq_int_probe, - .remove = exynos5_busfreq_int_remove, - .driver = { - .name = "exynos5-bus-int", - .pm = &exynos5_busfreq_int_pm_ops, - }, -}; - -static int __init exynos5_busfreq_int_init(void) -{ - int ret; - - ret = platform_driver_register(&exynos5_busfreq_int_driver); - if (ret < 0) - goto out; - - exynos5_devfreq_pdev = - platform_device_register_simple("exynos5-bus-int", -1, NULL, 0); - if (IS_ERR(exynos5_devfreq_pdev)) { - ret = PTR_ERR(exynos5_devfreq_pdev); - goto out1; - } - - return 0; -out1: - platform_driver_unregister(&exynos5_busfreq_int_driver); -out: - return ret; -} -late_initcall(exynos5_busfreq_int_init); - -static void __exit exynos5_busfreq_int_exit(void) -{ - platform_device_unregister(exynos5_devfreq_pdev); - platform_driver_unregister(&exynos5_busfreq_int_driver); -} -module_exit(exynos5_busfreq_int_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("EXYNOS5 busfreq driver with devfreq framework"); |