diff options
author | George Cherian <george.cherian@cavium.com> | 2017-02-07 14:51:13 +0000 |
---|---|---|
committer | Herbert Xu <herbert@gondor.apana.org.au> | 2017-02-11 17:52:31 +0800 |
commit | 9e2c7d99941d000a36f68a3594cec27a1bbea274 (patch) | |
tree | 9f2c553799bff57fe4961cedbf56004ba0b786b1 /drivers/crypto/cavium | |
parent | 87f3d0887c9cc63d7b8e7b0b7e5a48dca8cc8564 (diff) |
crypto: cavium - Add Support for Octeon-tx CPT Engine
Enable the Physical Function driver for the Cavium Crypto Engine (CPT)
found in Octeon-tx series of SoC's. CPT is the Cryptographic Accelaration
Unit. CPT includes microcoded GigaCypher symmetric engines (SEs) and
asymmetric engines (AEs).
Signed-off-by: George Cherian <george.cherian@cavium.com>
Reviewed-by: David Daney <david.daney@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Diffstat (limited to 'drivers/crypto/cavium')
-rw-r--r-- | drivers/crypto/cavium/cpt/Kconfig | 16 | ||||
-rw-r--r-- | drivers/crypto/cavium/cpt/Makefile | 2 | ||||
-rw-r--r-- | drivers/crypto/cavium/cpt/cpt_common.h | 158 | ||||
-rw-r--r-- | drivers/crypto/cavium/cpt/cpt_hw_types.h | 658 | ||||
-rw-r--r-- | drivers/crypto/cavium/cpt/cptpf.h | 69 | ||||
-rw-r--r-- | drivers/crypto/cavium/cpt/cptpf_main.c | 708 | ||||
-rw-r--r-- | drivers/crypto/cavium/cpt/cptpf_mbox.c | 163 |
7 files changed, 1774 insertions, 0 deletions
diff --git a/drivers/crypto/cavium/cpt/Kconfig b/drivers/crypto/cavium/cpt/Kconfig new file mode 100644 index 000000000000..247f1cbbefc1 --- /dev/null +++ b/drivers/crypto/cavium/cpt/Kconfig @@ -0,0 +1,16 @@ +# +# Cavium crypto device configuration +# + +config CRYPTO_DEV_CPT + tristate + +config CAVIUM_CPT + tristate "Cavium Cryptographic Accelerator driver" + depends on ARCH_THUNDER + select CRYPTO_DEV_CPT + help + Support for Cavium CPT block found in octeon-tx series of + processors. + + To compile this as a module, choose M here. diff --git a/drivers/crypto/cavium/cpt/Makefile b/drivers/crypto/cavium/cpt/Makefile new file mode 100644 index 000000000000..fe3d454a34a7 --- /dev/null +++ b/drivers/crypto/cavium/cpt/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_CAVIUM_CPT) += cptpf.o +cptpf-objs := cptpf_main.o cptpf_mbox.o diff --git a/drivers/crypto/cavium/cpt/cpt_common.h b/drivers/crypto/cavium/cpt/cpt_common.h new file mode 100644 index 000000000000..ede612f306d3 --- /dev/null +++ b/drivers/crypto/cavium/cpt/cpt_common.h @@ -0,0 +1,158 @@ +/* + * Copyright (C) 2016 Cavium, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + */ + +#ifndef __CPT_COMMON_H +#define __CPT_COMMON_H + +#include <asm/byteorder.h> +#include <linux/delay.h> +#include <linux/pci.h> + +#include "cpt_hw_types.h" + +/* Device ID */ +#define CPT_81XX_PCI_PF_DEVICE_ID 0xa040 +#define CPT_81XX_PCI_VF_DEVICE_ID 0xa041 + +/* flags to indicate the features supported */ +#define CPT_FLAG_MSIX_ENABLED BIT(0) +#define CPT_FLAG_SRIOV_ENABLED BIT(1) +#define CPT_FLAG_VF_DRIVER BIT(2) +#define CPT_FLAG_DEVICE_READY BIT(3) + +#define cpt_msix_enabled(cpt) ((cpt)->flags & CPT_FLAG_MSIX_ENABLED) +#define cpt_sriov_enabled(cpt) ((cpt)->flags & CPT_FLAG_SRIOV_ENABLED) +#define cpt_vf_driver(cpt) ((cpt)->flags & CPT_FLAG_VF_DRIVER) +#define cpt_device_ready(cpt) ((cpt)->flags & CPT_FLAG_DEVICE_READY) + +#define CPT_MBOX_MSG_TYPE_ACK 1 +#define CPT_MBOX_MSG_TYPE_NACK 2 +#define CPT_MBOX_MSG_TIMEOUT 2000 +#define VF_STATE_DOWN 0 +#define VF_STATE_UP 1 + +/* + * CPT Registers map for 81xx + */ + +/* PF registers */ +#define CPTX_PF_CONSTANTS(a) (0x0ll + ((u64)(a) << 36)) +#define CPTX_PF_RESET(a) (0x100ll + ((u64)(a) << 36)) +#define CPTX_PF_DIAG(a) (0x120ll + ((u64)(a) << 36)) +#define CPTX_PF_BIST_STATUS(a) (0x160ll + ((u64)(a) << 36)) +#define CPTX_PF_ECC0_CTL(a) (0x200ll + ((u64)(a) << 36)) +#define CPTX_PF_ECC0_FLIP(a) (0x210ll + ((u64)(a) << 36)) +#define CPTX_PF_ECC0_INT(a) (0x220ll + ((u64)(a) << 36)) +#define CPTX_PF_ECC0_INT_W1S(a) (0x230ll + ((u64)(a) << 36)) +#define CPTX_PF_ECC0_ENA_W1S(a) (0x240ll + ((u64)(a) << 36)) +#define CPTX_PF_ECC0_ENA_W1C(a) (0x250ll + ((u64)(a) << 36)) +#define CPTX_PF_MBOX_INTX(a, b) \ + (0x400ll + ((u64)(a) << 36) + ((b) << 3)) +#define CPTX_PF_MBOX_INT_W1SX(a, b) \ + (0x420ll + ((u64)(a) << 36) + ((b) << 3)) +#define CPTX_PF_MBOX_ENA_W1CX(a, b) \ + (0x440ll + ((u64)(a) << 36) + ((b) << 3)) +#define CPTX_PF_MBOX_ENA_W1SX(a, b) \ + (0x460ll + ((u64)(a) << 36) + ((b) << 3)) +#define CPTX_PF_EXEC_INT(a) (0x500ll + 0x1000000000ll * ((a) & 0x1)) +#define CPTX_PF_EXEC_INT_W1S(a) (0x520ll + ((u64)(a) << 36)) +#define CPTX_PF_EXEC_ENA_W1C(a) (0x540ll + ((u64)(a) << 36)) +#define CPTX_PF_EXEC_ENA_W1S(a) (0x560ll + ((u64)(a) << 36)) +#define CPTX_PF_GX_EN(a, b) \ + (0x600ll + ((u64)(a) << 36) + ((b) << 3)) +#define CPTX_PF_EXEC_INFO(a) (0x700ll + ((u64)(a) << 36)) +#define CPTX_PF_EXEC_BUSY(a) (0x800ll + ((u64)(a) << 36)) +#define CPTX_PF_EXEC_INFO0(a) (0x900ll + ((u64)(a) << 36)) +#define CPTX_PF_EXEC_INFO1(a) (0x910ll + ((u64)(a) << 36)) +#define CPTX_PF_INST_REQ_PC(a) (0x10000ll + ((u64)(a) << 36)) +#define CPTX_PF_INST_LATENCY_PC(a) \ + (0x10020ll + ((u64)(a) << 36)) +#define CPTX_PF_RD_REQ_PC(a) (0x10040ll + ((u64)(a) << 36)) +#define CPTX_PF_RD_LATENCY_PC(a) (0x10060ll + ((u64)(a) << 36)) +#define CPTX_PF_RD_UC_PC(a) (0x10080ll + ((u64)(a) << 36)) +#define CPTX_PF_ACTIVE_CYCLES_PC(a) (0x10100ll + ((u64)(a) << 36)) +#define CPTX_PF_EXE_CTL(a) (0x4000000ll + ((u64)(a) << 36)) +#define CPTX_PF_EXE_STATUS(a) (0x4000008ll + ((u64)(a) << 36)) +#define CPTX_PF_EXE_CLK(a) (0x4000010ll + ((u64)(a) << 36)) +#define CPTX_PF_EXE_DBG_CTL(a) (0x4000018ll + ((u64)(a) << 36)) +#define CPTX_PF_EXE_DBG_DATA(a) (0x4000020ll + ((u64)(a) << 36)) +#define CPTX_PF_EXE_BIST_STATUS(a) (0x4000028ll + ((u64)(a) << 36)) +#define CPTX_PF_EXE_REQ_TIMER(a) (0x4000030ll + ((u64)(a) << 36)) +#define CPTX_PF_EXE_MEM_CTL(a) (0x4000038ll + ((u64)(a) << 36)) +#define CPTX_PF_EXE_PERF_CTL(a) (0x4001000ll + ((u64)(a) << 36)) +#define CPTX_PF_EXE_DBG_CNTX(a, b) \ + (0x4001100ll + ((u64)(a) << 36) + ((b) << 3)) +#define CPTX_PF_EXE_PERF_EVENT_CNT(a) (0x4001180ll + ((u64)(a) << 36)) +#define CPTX_PF_EXE_EPCI_INBX_CNT(a, b) \ + (0x4001200ll + ((u64)(a) << 36) + ((b) << 3)) +#define CPTX_PF_EXE_EPCI_OUTBX_CNT(a, b) \ + (0x4001240ll + ((u64)(a) << 36) + ((b) << 3)) +#define CPTX_PF_ENGX_UCODE_BASE(a, b) \ + (0x4002000ll + ((u64)(a) << 36) + ((b) << 3)) +#define CPTX_PF_QX_CTL(a, b) \ + (0x8000000ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_PF_QX_GMCTL(a, b) \ + (0x8000020ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_PF_QX_CTL2(a, b) \ + (0x8000100ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_PF_VFX_MBOXX(a, b, c) \ + (0x8001000ll + ((u64)(a) << 36) + ((b) << 20) + ((c) << 8)) + +/* VF registers */ +#define CPTX_VQX_CTL(a, b) (0x100ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_VQX_SADDR(a, b) (0x200ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_VQX_DONE_WAIT(a, b) (0x400ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_VQX_INPROG(a, b) (0x410ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_VQX_DONE(a, b) (0x420ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_VQX_DONE_ACK(a, b) (0x440ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_VQX_DONE_INT_W1S(a, b) (0x460ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_VQX_DONE_INT_W1C(a, b) (0x468ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_VQX_DONE_ENA_W1S(a, b) (0x470ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_VQX_DONE_ENA_W1C(a, b) (0x478ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_VQX_MISC_INT(a, b) (0x500ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_VQX_MISC_INT_W1S(a, b) (0x508ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_VQX_MISC_ENA_W1S(a, b) (0x510ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_VQX_MISC_ENA_W1C(a, b) (0x518ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_VQX_DOORBELL(a, b) (0x600ll + ((u64)(a) << 36) + ((b) << 20)) +#define CPTX_VFX_PF_MBOXX(a, b, c) \ + (0x1000ll + ((u64)(a) << 36) + ((b) << 20) + ((c) << 3)) + +enum vftype { + AE_TYPES = 1, + SE_TYPES = 2, + BAD_CPT_TYPES, +}; + +/* Max CPT devices supported */ +enum cpt_mbox_opcode { + CPT_MSG_VF_UP = 1, + CPT_MSG_VF_DOWN, + CPT_MSG_READY, + CPT_MSG_QLEN, + CPT_MSG_QBIND_GRP, + CPT_MSG_VQ_PRIORITY, +}; + +/* CPT mailbox structure */ +struct cpt_mbox { + u64 msg; /* Message type MBOX[0] */ + u64 data;/* Data MBOX[1] */ +}; + +/* Register read/write APIs */ +static inline void cpt_write_csr64(u8 __iomem *hw_addr, u64 offset, + u64 val) +{ + writeq(val, hw_addr + offset); +} + +static inline u64 cpt_read_csr64(u8 __iomem *hw_addr, u64 offset) +{ + return readq(hw_addr + offset); +} +#endif /* __CPT_COMMON_H */ diff --git a/drivers/crypto/cavium/cpt/cpt_hw_types.h b/drivers/crypto/cavium/cpt/cpt_hw_types.h new file mode 100644 index 000000000000..279669494196 --- /dev/null +++ b/drivers/crypto/cavium/cpt/cpt_hw_types.h @@ -0,0 +1,658 @@ +/* + * Copyright (C) 2016 Cavium, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + */ + +#ifndef __CPT_HW_TYPES_H +#define __CPT_HW_TYPES_H + +#include "cpt_common.h" + +/** + * Enumeration cpt_comp_e + * + * CPT Completion Enumeration + * Enumerates the values of CPT_RES_S[COMPCODE]. + */ +enum cpt_comp_e { + CPT_COMP_E_NOTDONE = 0x00, + CPT_COMP_E_GOOD = 0x01, + CPT_COMP_E_FAULT = 0x02, + CPT_COMP_E_SWERR = 0x03, + CPT_COMP_E_LAST_ENTRY = 0xFF +}; + +/** + * Structure cpt_inst_s + * + * CPT Instruction Structure + * This structure specifies the instruction layout. Instructions are + * stored in memory as little-endian unless CPT()_PF_Q()_CTL[INST_BE] is set. + * cpt_inst_s_s + * Word 0 + * doneint:1 Done interrupt. + * 0 = No interrupts related to this instruction. + * 1 = When the instruction completes, CPT()_VQ()_DONE[DONE] will be + * incremented,and based on the rules described there an interrupt may + * occur. + * Word 1 + * res_addr [127: 64] Result IOVA. + * If nonzero, specifies where to write CPT_RES_S. + * If zero, no result structure will be written. + * Address must be 16-byte aligned. + * Bits <63:49> are ignored by hardware; software should use a + * sign-extended bit <48> for forward compatibility. + * Word 2 + * grp:10 [171:162] If [WQ_PTR] is nonzero, the SSO guest-group to use when + * CPT submits work SSO. + * For the SSO to not discard the add-work request, FPA_PF_MAP() must map + * [GRP] and CPT()_PF_Q()_GMCTL[GMID] as valid. + * tt:2 [161:160] If [WQ_PTR] is nonzero, the SSO tag type to use when CPT + * submits work to SSO + * tag:32 [159:128] If [WQ_PTR] is nonzero, the SSO tag to use when CPT + * submits work to SSO. + * Word 3 + * wq_ptr [255:192] If [WQ_PTR] is nonzero, it is a pointer to a + * work-queue entry that CPT submits work to SSO after all context, + * output data, and result write operations are visible to other + * CNXXXX units and the cores. Bits <2:0> must be zero. + * Bits <63:49> are ignored by hardware; software should + * use a sign-extended bit <48> for forward compatibility. + * Internal: + * Bits <63:49>, <2:0> are ignored by hardware, treated as always 0x0. + * Word 4 + * ei0; [319:256] Engine instruction word 0. Passed to the AE/SE. + * Word 5 + * ei1; [383:320] Engine instruction word 1. Passed to the AE/SE. + * Word 6 + * ei2; [447:384] Engine instruction word 1. Passed to the AE/SE. + * Word 7 + * ei3; [511:448] Engine instruction word 1. Passed to the AE/SE. + * + */ +union cpt_inst_s { + u64 u[8]; + struct cpt_inst_s_s { +#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */ + u64 reserved_17_63:47; + u64 doneint:1; + u64 reserved_0_1:16; +#else /* Word 0 - Little Endian */ + u64 reserved_0_15:16; + u64 doneint:1; + u64 reserved_17_63:47; +#endif /* Word 0 - End */ + u64 res_addr; +#if defined(__BIG_ENDIAN_BITFIELD) /* Word 2 - Big Endian */ + u64 reserved_172_19:20; + u64 grp:10; + u64 tt:2; + u64 tag:32; +#else /* Word 2 - Little Endian */ + u64 tag:32; + u64 tt:2; + u64 grp:10; + u64 reserved_172_191:20; +#endif /* Word 2 - End */ + u64 wq_ptr; + u64 ei0; + u64 ei1; + u64 ei2; + u64 ei3; + } s; +}; + +/** + * Structure cpt_res_s + * + * CPT Result Structure + * The CPT coprocessor writes the result structure after it completes a + * CPT_INST_S instruction. The result structure is exactly 16 bytes, and + * each instruction completion produces exactly one result structure. + * + * This structure is stored in memory as little-endian unless + * CPT()_PF_Q()_CTL[INST_BE] is set. + * cpt_res_s_s + * Word 0 + * doneint:1 [16:16] Done interrupt. This bit is copied from the + * corresponding instruction's CPT_INST_S[DONEINT]. + * compcode:8 [7:0] Indicates completion/error status of the CPT coprocessor + * for the associated instruction, as enumerated by CPT_COMP_E. + * Core software may write the memory location containing [COMPCODE] to + * 0x0 before ringing the doorbell, and then poll for completion by + * checking for a nonzero value. + * Once the core observes a nonzero [COMPCODE] value in this case,the CPT + * coprocessor will have also completed L2/DRAM write operations. + * Word 1 + * reserved + * + */ +union cpt_res_s { + u64 u[2]; + struct cpt_res_s_s { +#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */ + u64 reserved_17_63:47; + u64 doneint:1; + u64 reserved_8_15:8; + u64 compcode:8; +#else /* Word 0 - Little Endian */ + u64 compcode:8; + u64 reserved_8_15:8; + u64 doneint:1; + u64 reserved_17_63:47; +#endif /* Word 0 - End */ + u64 reserved_64_127; + } s; +}; + +/** + * Register (NCB) cpt#_pf_bist_status + * + * CPT PF Control Bist Status Register + * This register has the BIST status of memories. Each bit is the BIST result + * of an individual memory (per bit, 0 = pass and 1 = fail). + * cptx_pf_bist_status_s + * Word0 + * bstatus [29:0](RO/H) BIST status. One bit per memory, enumerated by + * CPT_RAMS_E. + */ +union cptx_pf_bist_status { + u64 u; + struct cptx_pf_bist_status_s { +#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */ + u64 reserved_30_63:34; + u64 bstatus:30; +#else /* Word 0 - Little Endian */ + u64 bstatus:30; + u64 reserved_30_63:34; +#endif /* Word 0 - End */ + } s; +}; + +/** + * Register (NCB) cpt#_pf_constants + * + * CPT PF Constants Register + * This register contains implementation-related parameters of CPT in CNXXXX. + * cptx_pf_constants_s + * Word 0 + * reserved_40_63:24 [63:40] Reserved. + * epcis:8 [39:32](RO) Number of EPCI busses. + * grps:8 [31:24](RO) Number of engine groups implemented. + * ae:8 [23:16](RO/H) Number of AEs. In CNXXXX, for CPT0 returns 0x0, + * for CPT1 returns 0x18, or less if there are fuse-disables. + * se:8 [15:8](RO/H) Number of SEs. In CNXXXX, for CPT0 returns 0x30, + * or less if there are fuse-disables, for CPT1 returns 0x0. + * vq:8 [7:0](RO) Number of VQs. + */ +union cptx_pf_constants { + u64 u; + struct cptx_pf_constants_s { +#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */ + u64 reserved_40_63:24; + u64 epcis:8; + u64 grps:8; + u64 ae:8; + u64 se:8; + u64 vq:8; +#else /* Word 0 - Little Endian */ + u64 vq:8; + u64 se:8; + u64 ae:8; + u64 grps:8; + u64 epcis:8; + u64 reserved_40_63:24; +#endif /* Word 0 - End */ + } s; +}; + +/** + * Register (NCB) cpt#_pf_exe_bist_status + * + * CPT PF Engine Bist Status Register + * This register has the BIST status of each engine. Each bit is the + * BIST result of an individual engine (per bit, 0 = pass and 1 = fail). + * cptx_pf_exe_bist_status_s + * Word0 + * reserved_48_63:16 [63:48] reserved + * bstatus:48 [47:0](RO/H) BIST status. One bit per engine. + * + */ +union cptx_pf_exe_bist_status { + u64 u; + struct cptx_pf_exe_bist_status_s { +#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */ + u64 reserved_48_63:16; + u64 bstatus:48; +#else /* Word 0 - Little Endian */ + u64 bstatus:48; + u64 reserved_48_63:16; +#endif /* Word 0 - End */ + } s; +}; + +/** + * Register (NCB) cpt#_pf_q#_ctl + * + * CPT Queue Control Register + * This register configures queues. This register should be changed only + * when quiescent (see CPT()_VQ()_INPROG[INFLIGHT]). + * cptx_pf_qx_ctl_s + * Word0 + * reserved_60_63:4 [63:60] reserved. + * aura:12; [59:48](R/W) Guest-aura for returning this queue's + * instruction-chunk buffers to FPA. Only used when [INST_FREE] is set. + * For the FPA to not discard the request, FPA_PF_MAP() must map + * [AURA] and CPT()_PF_Q()_GMCTL[GMID] as valid. + * reserved_45_47:3 [47:45] reserved. + * size:13 [44:32](R/W) Command-buffer size, in number of 64-bit words per + * command buffer segment. Must be 8*n + 1, where n is the number of + * instructions per buffer segment. + * reserved_11_31:21 [31:11] Reserved. + * cont_err:1 [10:10](R/W) Continue on error. + * 0 = When CPT()_VQ()_MISC_INT[NWRP], CPT()_VQ()_MISC_INT[IRDE] or + * CPT()_VQ()_MISC_INT[DOVF] are set by hardware or software via + * CPT()_VQ()_MISC_INT_W1S, then CPT()_VQ()_CTL[ENA] is cleared. Due to + * pipelining, additional instructions may have been processed between the + * instruction causing the error and the next instruction in the disabled + * queue (the instruction at CPT()_VQ()_SADDR). + * 1 = Ignore errors and continue processing instructions. + * For diagnostic use only. + * inst_free:1 [9:9](R/W) Instruction FPA free. When set, when CPT reaches the + * end of an instruction chunk, that chunk will be freed to the FPA. + * inst_be:1 [8:8](R/W) Instruction big-endian control. When set, instructions, + * instruction next chunk pointers, and result structures are stored in + * big-endian format in memory. + * iqb_ldwb:1 [7:7](R/W) Instruction load don't write back. + * 0 = The hardware issues NCB transient load (LDT) towards the cache, + * which if the line hits and is is dirty will cause the line to be + * written back before being replaced. + * 1 = The hardware issues NCB LDWB read-and-invalidate command towards + * the cache when fetching the last word of instructions; as a result the + * line will not be written back when replaced. This improves + * performance, but software must not read the instructions after they are + * posted to the hardware. Reads that do not consume the last word of a + * cache line always use LDI. + * reserved_4_6:3 [6:4] Reserved. + * grp:3; [3:1](R/W) Engine group. + * pri:1; [0:0](R/W) Queue priority. + * 1 = This queue has higher priority. Round-robin between higher + * priority queues. + * 0 = This queue has lower priority. Round-robin between lower + * priority queues. + */ +union cptx_pf_qx_ctl { + u64 u; + struct cptx_pf_qx_ctl_s { +#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */ + u64 reserved_60_63:4; + u64 aura:12; + u64 reserved_45_47:3; + u64 size:13; + u64 reserved_11_31:21; + u64 cont_err:1; + u64 inst_free:1; + u64 inst_be:1; + u64 iqb_ldwb:1; + u64 reserved_4_6:3; + u64 grp:3; + u64 pri:1; +#else /* Word 0 - Little Endian */ + u64 pri:1; + u64 grp:3; + u64 reserved_4_6:3; + u64 iqb_ldwb:1; + u64 inst_be:1; + u64 inst_free:1; + u64 cont_err:1; + u64 reserved_11_31:21; + u64 size:13; + u64 reserved_45_47:3; + u64 aura:12; + u64 reserved_60_63:4; +#endif /* Word 0 - End */ + } s; +}; + +/** + * Register (NCB) cpt#_vq#_saddr + * + * CPT Queue Starting Buffer Address Registers + * These registers set the instruction buffer starting address. + * cptx_vqx_saddr_s + * Word0 + * reserved_49_63:15 [63:49] Reserved. + * ptr:43 [48:6](R/W/H) Instruction buffer IOVA <48:6> (64-byte aligned). + * When written, it is the initial buffer starting address; when read, + * it is the next read pointer to be requested from L2C. The PTR field + * is overwritten with the next pointer each time that the command buffer + * segment is exhausted. New commands will then be read from the newly + * specified command buffer pointer. + * reserved_0_5:6 [5:0] Reserved. + * + */ +union cptx_vqx_saddr { + u64 u; + struct cptx_vqx_saddr_s { +#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */ + u64 reserved_49_63:15; + u64 ptr:43; + u64 reserved_0_5:6; +#else /* Word 0 - Little Endian */ + u64 reserved_0_5:6; + u64 ptr:43; + u64 reserved_49_63:15; +#endif /* Word 0 - End */ + } s; +}; + +/** + * Register (NCB) cpt#_vq#_misc_ena_w1s + * + * CPT Queue Misc Interrupt Enable Set Register + * This register sets interrupt enable bits. + * cptx_vqx_misc_ena_w1s_s + * Word0 + * reserved_5_63:59 [63:5] Reserved. + * swerr:1 [4:4](R/W1S/H) Reads or sets enable for + * CPT(0..1)_VQ(0..63)_MISC_INT[SWERR]. + * nwrp:1 [3:3](R/W1S/H) Reads or sets enable for + * CPT(0..1)_VQ(0..63)_MISC_INT[NWRP]. + * irde:1 [2:2](R/W1S/H) Reads or sets enable for + * CPT(0..1)_VQ(0..63)_MISC_INT[IRDE]. + * dovf:1 [1:1](R/W1S/H) Reads or sets enable for + * CPT(0..1)_VQ(0..63)_MISC_INT[DOVF]. + * mbox:1 [0:0](R/W1S/H) Reads or sets enable for + * CPT(0..1)_VQ(0..63)_MISC_INT[MBOX]. + * + */ +union cptx_vqx_misc_ena_w1s { + u64 u; + struct cptx_vqx_misc_ena_w1s_s { +#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */ + u64 reserved_5_63:59; + u64 swerr:1; + u64 nwrp:1; + u64 irde:1; + u64 dovf:1; + u64 mbox:1; +#else /* Word 0 - Little Endian */ + u64 mbox:1; + u64 dovf:1; + u64 irde:1; + u64 nwrp:1; + u64 swerr:1; + u64 reserved_5_63:59; +#endif /* Word 0 - End */ + } s; +}; + +/** + * Register (NCB) cpt#_vq#_doorbell + * + * CPT Queue Doorbell Registers + * Doorbells for the CPT instruction queues. + * cptx_vqx_doorbell_s + * Word0 + * reserved_20_63:44 [63:20] Reserved. + * dbell_cnt:20 [19:0](R/W/H) Number of instruction queue 64-bit words to add + * to the CPT instruction doorbell count. Readback value is the the + * current number of pending doorbell requests. If counter overflows + * CPT()_VQ()_MISC_INT[DBELL_DOVF] is set. To reset the count back to + * zero, write one to clear CPT()_VQ()_MISC_INT_ENA_W1C[DBELL_DOVF], + * then write a value of 2^20 minus the read [DBELL_CNT], then write one + * to CPT()_VQ()_MISC_INT_W1C[DBELL_DOVF] and + * CPT()_VQ()_MISC_INT_ENA_W1S[DBELL_DOVF]. Must be a multiple of 8. + * All CPT instructions are 8 words and require a doorbell count of + * multiple of 8. + */ +union cptx_vqx_doorbell { + u64 u; + struct cptx_vqx_doorbell_s { +#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */ + u64 reserved_20_63:44; + u64 dbell_cnt:20; +#else /* Word 0 - Little Endian */ + u64 dbell_cnt:20; + u64 reserved_20_63:44; +#endif /* Word 0 - End */ + } s; +}; + +/** + * Register (NCB) cpt#_vq#_inprog + * + * CPT Queue In Progress Count Registers + * These registers contain the per-queue instruction in flight registers. + * cptx_vqx_inprog_s + * Word0 + * reserved_8_63:56 [63:8] Reserved. + * inflight:8 [7:0](RO/H) Inflight count. Counts the number of instructions + * for the VF for which CPT is fetching, executing or responding to + * instructions. However this does not include any interrupts that are + * awaiting software handling (CPT()_VQ()_DONE[DONE] != 0x0). + * A queue may not be reconfigured until: + * 1. CPT()_VQ()_CTL[ENA] is cleared by software. + * 2. [INFLIGHT] is polled until equals to zero. + */ +union cptx_vqx_inprog { + u64 u; + struct cptx_vqx_inprog_s { +#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */ + u64 reserved_8_63:56; + u64 inflight:8; +#else /* Word 0 - Little Endian */ + u64 inflight:8; + u64 reserved_8_63:56; +#endif /* Word 0 - End */ + } s; +}; + +/** + * Register (NCB) cpt#_vq#_misc_int + * + * CPT Queue Misc Interrupt Register + * These registers contain the per-queue miscellaneous interrupts. + * cptx_vqx_misc_int_s + * Word 0 + * reserved_5_63:59 [63:5] Reserved. + * swerr:1 [4:4](R/W1C/H) Software error from engines. + * nwrp:1 [3:3](R/W1C/H) NCB result write response error. + * irde:1 [2:2](R/W1C/H) Instruction NCB read response error. + * dovf:1 [1:1](R/W1C/H) Doorbell overflow. + * mbox:1 [0:0](R/W1C/H) PF to VF mailbox interrupt. Set when + * CPT()_VF()_PF_MBOX(0) is written. + * + */ +union cptx_vqx_misc_int { + u64 u; + struct cptx_vqx_misc_int_s { +#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */ + u64 reserved_5_63:59; + u64 swerr:1; + u64 nwrp:1; + u64 irde:1; + u64 dovf:1; + u64 mbox:1; +#else /* Word 0 - Little Endian */ + u64 mbox:1; + u64 dovf:1; + u64 irde:1; + u64 nwrp:1; + u64 swerr:1; + u64 reserved_5_63:59; +#endif /* Word 0 - End */ + } s; +}; + +/** + * Register (NCB) cpt#_vq#_done_ack + * + * CPT Queue Done Count Ack Registers + * This register is written by software to acknowledge interrupts. + * cptx_vqx_done_ack_s + * Word0 + * reserved_20_63:44 [63:20] Reserved. + * done_ack:20 [19:0](R/W/H) Number of decrements to CPT()_VQ()_DONE[DONE]. + * Reads CPT()_VQ()_DONE[DONE]. Written by software to acknowledge + * interrupts. If CPT()_VQ()_DONE[DONE] is still nonzero the interrupt + * will be re-sent if the conditions described in CPT()_VQ()_DONE[DONE] + * are satisfied. + * + */ +union cptx_vqx_done_ack { + u64 u; + struct cptx_vqx_done_ack_s { +#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */ + u64 reserved_20_63:44; + u64 done_ack:20; +#else /* Word 0 - Little Endian */ + u64 done_ack:20; + u64 reserved_20_63:44; +#endif /* Word 0 - End */ + } s; +}; + +/** + * Register (NCB) cpt#_vq#_done + * + * CPT Queue Done Count Registers + * These registers contain the per-queue instruction done count. + * cptx_vqx_done_s + * Word0 + * reserved_20_63:44 [63:20] Reserved. + * done:20 [19:0](R/W/H) Done count. When CPT_INST_S[DONEINT] set and that + * instruction completes, CPT()_VQ()_DONE[DONE] is incremented when the + * instruction finishes. Write to this field are for diagnostic use only; + * instead software writes CPT()_VQ()_DONE_ACK with the number of + * decrements for this field. + * Interrupts are sent as follows: + * * When CPT()_VQ()_DONE[DONE] = 0, then no results are pending, the + * interrupt coalescing timer is held to zero, and an interrupt is not + * sent. + * * When CPT()_VQ()_DONE[DONE] != 0, then the interrupt coalescing timer + * counts. If the counter is >= CPT()_VQ()_DONE_WAIT[TIME_WAIT]*1024, or + * CPT()_VQ()_DONE[DONE] >= CPT()_VQ()_DONE_WAIT[NUM_WAIT], i.e. enough + * time has passed or enough results have arrived, then the interrupt is + * sent. + * * When CPT()_VQ()_DONE_ACK is written (or CPT()_VQ()_DONE is written + * but this is not typical), the interrupt coalescing timer restarts. + * Note after decrementing this interrupt equation is recomputed, + * for example if CPT()_VQ()_DONE[DONE] >= CPT()_VQ()_DONE_WAIT[NUM_WAIT] + * and because the timer is zero, the interrupt will be resent immediately. + * (This covers the race case between software acknowledging an interrupt + * and a result returning.) + * * When CPT()_VQ()_DONE_ENA_W1S[DONE] = 0, interrupts are not sent, + * but the counting described above still occurs. + * Since CPT instructions complete out-of-order, if software is using + * completion interrupts the suggested scheme is to request a DONEINT on + * each request, and when an interrupt arrives perform a "greedy" scan for + * completions; even if a later command is acknowledged first this will + * not result in missing a completion. + * Software is responsible for making sure [DONE] does not overflow; + * for example by insuring there are not more than 2^20-1 instructions in + * flight that may request interrupts. + * + */ +union cptx_vqx_done { + u64 u; + struct cptx_vqx_done_s { +#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */ + u64 reserved_20_63:44; + u64 done:20; +#else /* Word 0 - Little Endian */ + u64 done:20; + u64 reserved_20_63:44; +#endif /* Word 0 - End */ + } s; +}; + +/** + * Register (NCB) cpt#_vq#_done_wait + * + * CPT Queue Done Interrupt Coalescing Wait Registers + * Specifies the per queue interrupt coalescing settings. + * cptx_vqx_done_wait_s + * Word0 + * reserved_48_63:16 [63:48] Reserved. + * time_wait:16; [47:32](R/W) Time hold-off. When CPT()_VQ()_DONE[DONE] = 0 + * or CPT()_VQ()_DONE_ACK is written a timer is cleared. When the timer + * reaches [TIME_WAIT]*1024 then interrupt coalescing ends. + * see CPT()_VQ()_DONE[DONE]. If 0x0, time coalescing is disabled. + * reserved_20_31:12 [31:20] Reserved. + * num_wait:20 [19:0](R/W) Number of messages hold-off. + * When CPT()_VQ()_DONE[DONE] >= [NUM_WAIT] then interrupt coalescing ends + * see CPT()_VQ()_DONE[DONE]. If 0x0, same behavior as 0x1. + * + */ +union cptx_vqx_done_wait { + u64 u; + struct cptx_vqx_done_wait_s { +#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */ + u64 reserved_48_63:16; + u64 time_wait:16; + u64 reserved_20_31:12; + u64 num_wait:20; +#else /* Word 0 - Little Endian */ + u64 num_wait:20; + u64 reserved_20_31:12; + u64 time_wait:16; + u64 reserved_48_63:16; +#endif /* Word 0 - End */ + } s; +}; + +/** + * Register (NCB) cpt#_vq#_done_ena_w1s + * + * CPT Queue Done Interrupt Enable Set Registers + * Write 1 to these registers will enable the DONEINT interrupt for the queue. + * cptx_vqx_done_ena_w1s_s + * Word0 + * reserved_1_63:63 [63:1] Reserved. + * done:1 [0:0](R/W1S/H) Write 1 will enable DONEINT for this queue. + * Write 0 has no effect. Read will return the enable bit. + */ +union cptx_vqx_done_ena_w1s { + u64 u; + struct cptx_vqx_done_ena_w1s_s { +#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */ + u64 reserved_1_63:63; + u64 done:1; +#else /* Word 0 - Little Endian */ + u64 done:1; + u64 reserved_1_63:63; +#endif /* Word 0 - End */ + } s; +}; + +/** + * Register (NCB) cpt#_vq#_ctl + * + * CPT VF Queue Control Registers + * This register configures queues. This register should be changed (other than + * clearing [ENA]) only when quiescent (see CPT()_VQ()_INPROG[INFLIGHT]). + * cptx_vqx_ctl_s + * Word0 + * reserved_1_63:63 [63:1] Reserved. + * ena:1 [0:0](R/W/H) Enables the logical instruction queue. + * See also CPT()_PF_Q()_CTL[CONT_ERR] and CPT()_VQ()_INPROG[INFLIGHT]. + * 1 = Queue is enabled. + * 0 = Queue is disabled. + */ +union cptx_vqx_ctl { + u64 u; + struct cptx_vqx_ctl_s { +#if defined(__BIG_ENDIAN_BITFIELD) /* Word 0 - Big Endian */ + u64 reserved_1_63:63; + u64 ena:1; +#else /* Word 0 - Little Endian */ + u64 ena:1; + u64 reserved_1_63:63; +#endif /* Word 0 - End */ + } s; +}; +#endif /*__CPT_HW_TYPES_H*/ diff --git a/drivers/crypto/cavium/cpt/cptpf.h b/drivers/crypto/cavium/cpt/cptpf.h new file mode 100644 index 000000000000..8a2a8e538da4 --- /dev/null +++ b/drivers/crypto/cavium/cpt/cptpf.h @@ -0,0 +1,69 @@ +/* + * Copyright (C) 2016 Cavium, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + */ + +#ifndef __CPTPF_H +#define __CPTPF_H + +#include "cpt_common.h" + +#define CSR_DELAY 30 +#define CPT_MAX_CORE_GROUPS 8 +#define CPT_MAX_SE_CORES 10 +#define CPT_MAX_AE_CORES 6 +#define CPT_MAX_TOTAL_CORES (CPT_MAX_SE_CORES + CPT_MAX_AE_CORES) +#define CPT_MAX_VF_NUM 16 +#define CPT_PF_MSIX_VECTORS 3 +#define CPT_PF_INT_VEC_E_MBOXX(a) (0x02 + (a)) +#define CPT_UCODE_VERSION_SZ 32 +struct cpt_device; + +struct microcode { + u8 is_mc_valid; + u8 is_ae; + u8 group; + u8 num_cores; + u32 code_size; + u64 core_mask; + u8 version[CPT_UCODE_VERSION_SZ]; + /* Base info */ + dma_addr_t phys_base; + void *code; +}; + +struct cpt_vf_info { + u8 state; + u8 priority; + u8 id; + u32 qlen; +}; + +/** + * cpt device structure + */ +struct cpt_device { + u16 flags; /* Flags to hold device status bits */ + u8 num_vf_en; /* Number of VFs enabled (0...CPT_MAX_VF_NUM) */ + struct cpt_vf_info vfinfo[CPT_MAX_VF_NUM]; /* Per VF info */ + + void __iomem *reg_base; /* Register start address */ + /* MSI-X */ + u8 num_vec; + bool msix_enabled; + struct msix_entry msix_entries[CPT_PF_MSIX_VECTORS]; + bool irq_allocated[CPT_PF_MSIX_VECTORS]; + struct pci_dev *pdev; /* pci device handle */ + + struct microcode mcode[CPT_MAX_CORE_GROUPS]; + u8 next_mc_idx; /* next microcode index */ + u8 next_group; + u8 max_se_cores; + u8 max_ae_cores; +}; + +void cpt_mbox_intr_handler(struct cpt_device *cpt, int mbx); +#endif /* __CPTPF_H */ diff --git a/drivers/crypto/cavium/cpt/cptpf_main.c b/drivers/crypto/cavium/cpt/cptpf_main.c new file mode 100644 index 000000000000..682d57a11a75 --- /dev/null +++ b/drivers/crypto/cavium/cpt/cptpf_main.c @@ -0,0 +1,708 @@ +/* + * Copyright (C) 2016 Cavium, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + */ + +#include <linux/device.h> +#include <linux/firmware.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/pci.h> +#include <linux/printk.h> +#include <linux/version.h> + +#include "cptpf.h" + +#define DRV_NAME "thunder-cpt" +#define DRV_VERSION "1.0" + +static u32 num_vfs = 4; /* Default 4 VF enabled */ +module_param(num_vfs, uint, 0444); +MODULE_PARM_DESC(num_vfs, "Number of VFs to enable(1-16)"); + +/* + * Disable cores specified by coremask + */ +static void cpt_disable_cores(struct cpt_device *cpt, u64 coremask, + u8 type, u8 grp) +{ + u64 pf_exe_ctl; + u32 timeout = 100; + u64 grpmask = 0; + struct device *dev = &cpt->pdev->dev; + + if (type == AE_TYPES) + coremask = (coremask << cpt->max_se_cores); + + /* Disengage the cores from groups */ + grpmask = cpt_read_csr64(cpt->reg_base, CPTX_PF_GX_EN(0, grp)); + cpt_write_csr64(cpt->reg_base, CPTX_PF_GX_EN(0, grp), + (grpmask & ~coremask)); + udelay(CSR_DELAY); + grp = cpt_read_csr64(cpt->reg_base, CPTX_PF_EXEC_BUSY(0)); + while (grp & coremask) { + dev_err(dev, "Cores still busy %llx", coremask); + grp = cpt_read_csr64(cpt->reg_base, + CPTX_PF_EXEC_BUSY(0)); + if (timeout--) + break; + + udelay(CSR_DELAY); + } + + /* Disable the cores */ + pf_exe_ctl = cpt_read_csr64(cpt->reg_base, CPTX_PF_EXE_CTL(0)); + cpt_write_csr64(cpt->reg_base, CPTX_PF_EXE_CTL(0), + (pf_exe_ctl & ~coremask)); + udelay(CSR_DELAY); |