Merge tag 'clk-for-linus-3.20' of git://git.linaro.org/people/mike.turquette/linux

Pull clock framework updates from Mike Turquette:
 "The clock framework changes contain the usual driver additions,
  enhancements and fixes mostly for ARM32, ARM64, MIPS and Power-based
  devices.

  Additionally the framework core underwent a bit of surgery with two
  major changes:

   - The boundary between the clock core and clock providers (e.g clock
     drivers) is now more well defined with dedicated provider helper
     functions.  struct clk no longer maps 1:1 with the hardware clock
     but is a true per-user cookie which helps us tracker users of
     hardware clocks and debug bad behavior.

   - The addition of rate constraints for clocks.  Rate ranges are now
     supported which are analogous to the voltage ranges in the
     regulator framework.

  Unfortunately these changes to the core created some breakeage.  We
  think we fixed it all up but for this reason there are lots of last
  minute commits trying to undo the damage"

* tag 'clk-for-linus-3.20' of git://git.linaro.org/people/mike.turquette/linux: (113 commits)
  clk: Only recalculate the rate if needed
  Revert "clk: mxs: Fix invalid 32-bit access to frac registers"
  clk: qoriq: Add support for the platform PLL
  powerpc/corenet: Enable CLK_QORIQ
  clk: Replace explicit clk assignment with __clk_hw_set_clk
  clk: Add __clk_hw_set_clk helper function
  clk: Don't dereference parent clock if is NULL
  MIPS: Alchemy: Remove bogus args from alchemy_clk_fgcs_detr
  clkdev: Always allocate a struct clk and call __clk_get() w/ CCF
  clk: shmobile: div6: Avoid division by zero in .round_rate()
  clk: mxs: Fix invalid 32-bit access to frac registers
  clk: omap: compile legacy omap3 clocks conditionally
  clkdev: Export clk_register_clkdev
  clk: Add rate constraints to clocks
  clk: remove clk-private.h
  pci: xgene: do not use clk-private.h
  arm: omap2+ remove dead clock code
  clk: Make clk API return per-user struct clk instances
  clk: tegra: Define PLLD_DSI and remove dsia(b)_mux
  clk: tegra: Add support for the Tegra132 CAR IP block
  ...

1 files changed, 85 insertions, 34 deletions

diff --git a/drivers/clk/sunxi/clk-sun9i-core.c b/drivers/clk/sunxi/clk-sun9i-core.c
index 3cb9036d91bb..d8da77d72861 100644
--- a/drivers/clk/sunxi/clk-sun9i-core.c
+++ b/drivers/clk/sunxi/clk-sun9i-core.c
@@ -24,50 +24,51 @@
 
 
 /**
- * sun9i_a80_get_pll4_factors() - calculates n, p, m factors for PLL1
+ * sun9i_a80_get_pll4_factors() - calculates n, p, m factors for PLL4
  * PLL4 rate is calculated as follows
  * rate = (parent_rate * n >> p) / (m + 1);
- * parent_rate is always 24Mhz
+ * parent_rate is always 24MHz
  *
  * p and m are named div1 and div2 in Allwinner's SDK
  */
 
 static void sun9i_a80_get_pll4_factors(u32 *freq, u32 parent_rate,
-				       u8 *n, u8 *k, u8 *m, u8 *p)
+				       u8 *n_ret, u8 *k, u8 *m_ret, u8 *p_ret)
 {
-	int div;
+	int n;
+	int m = 1;
+	int p = 1;
 
-	/* Normalize value to a 6M multiple */
-	div = DIV_ROUND_UP(*freq, 6000000);
+	/* Normalize value to a 6 MHz multiple (24 MHz / 4) */
+	n = DIV_ROUND_UP(*freq, 6000000);
 
-	/* divs above 256 cannot be odd */
-	if (div > 256)
-		div = round_up(div, 2);
+	/* If n is too large switch to steps of 12 MHz */
+	if (n > 255) {
+		m = 0;
+		n = (n + 1) / 2;
+	}
+
+	/* If n is still too large switch to steps of 24 MHz */
+	if (n > 255) {
+		p = 0;
+		n = (n + 1) / 2;
+	}
 
-	/* divs above 512 must be a multiple of 4 */
-	if (div > 512)
-		div = round_up(div, 4);
+	/* n must be between 12 and 255 */
+	if (n > 255)
+		n = 255;
+	else if (n < 12)
+		n = 12;
 
-	*freq = 6000000 * div;
+	*freq = ((24000000 * n) >> p) / (m + 1);
 
 	/* we were called to round the frequency, we can now return */
-	if (n == NULL)
+	if (n_ret == NULL)
 		return;
 
-	/* p will be 1 for divs under 512 */
-	if (div < 512)
-		*p = 1;
-	else
-		*p = 0;
-
-	/* m will be 1 if div is odd */
-	if (div & 1)
-		*m = 1;
-	else
-		*m = 0;
-
-	/* calculate a suitable n based on m and p */
-	*n = div / (*p + 1) / (*m + 1);
+	*n_ret = n;
+	*m_ret = m;
+	*p_ret = p;
 }
 
 static struct clk_factors_config sun9i_a80_pll4_config = {
@@ -89,7 +90,17 @@ static DEFINE_SPINLOCK(sun9i_a80_pll4_lock);
 
 static void __init sun9i_a80_pll4_setup(struct device_node *node)
 {
-	sunxi_factors_register(node, &sun9i_a80_pll4_data, &sun9i_a80_pll4_lock);
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (!reg) {
+		pr_err("Could not get registers for a80-pll4-clk: %s\n",
+		       node->name);
+		return;
+	}
+
+	sunxi_factors_register(node, &sun9i_a80_pll4_data,
+			       &sun9i_a80_pll4_lock, reg);
 }
 CLK_OF_DECLARE(sun9i_a80_pll4, "allwinner,sun9i-a80-pll4-clk", sun9i_a80_pll4_setup);
 
@@ -139,8 +150,18 @@ static DEFINE_SPINLOCK(sun9i_a80_gt_lock);
 
 static void __init sun9i_a80_gt_setup(struct device_node *node)
 {
-	struct clk *gt = sunxi_factors_register(node, &sun9i_a80_gt_data,
-						&sun9i_a80_gt_lock);
+	void __iomem *reg;
+	struct clk *gt;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (!reg) {
+		pr_err("Could not get registers for a80-gt-clk: %s\n",
+		       node->name);
+		return;
+	}
+
+	gt = sunxi_factors_register(node, &sun9i_a80_gt_data,
+				    &sun9i_a80_gt_lock, reg);
 
 	/* The GT bus clock needs to be always enabled */
 	__clk_get(gt);
@@ -194,7 +215,17 @@ static DEFINE_SPINLOCK(sun9i_a80_ahb_lock);
 
 static void __init sun9i_a80_ahb_setup(struct device_node *node)
 {
-	sunxi_factors_register(node, &sun9i_a80_ahb_data, &sun9i_a80_ahb_lock);
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (!reg) {
+		pr_err("Could not get registers for a80-ahb-clk: %s\n",
+		       node->name);
+		return;
+	}
+
+	sunxi_factors_register(node, &sun9i_a80_ahb_data,
+			       &sun9i_a80_ahb_lock, reg);
 }
 CLK_OF_DECLARE(sun9i_a80_ahb, "allwinner,sun9i-a80-ahb-clk", sun9i_a80_ahb_setup);
 
@@ -210,7 +241,17 @@ static DEFINE_SPINLOCK(sun9i_a80_apb0_lock);
 
 static void __init sun9i_a80_apb0_setup(struct device_node *node)
 {
-	sunxi_factors_register(node, &sun9i_a80_apb0_data, &sun9i_a80_apb0_lock);
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (!reg) {
+		pr_err("Could not get registers for a80-apb0-clk: %s\n",
+		       node->name);
+		return;
+	}
+
+	sunxi_factors_register(node, &sun9i_a80_apb0_data,
+			       &sun9i_a80_apb0_lock, reg);
 }
 CLK_OF_DECLARE(sun9i_a80_apb0, "allwinner,sun9i-a80-apb0-clk", sun9i_a80_apb0_setup);
 
@@ -266,6 +307,16 @@ static DEFINE_SPINLOCK(sun9i_a80_apb1_lock);
 
 static void __init sun9i_a80_apb1_setup(struct device_node *node)
 {
-	sunxi_factors_register(node, &sun9i_a80_apb1_data, &sun9i_a80_apb1_lock);
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (!reg) {
+		pr_err("Could not get registers for a80-apb1-clk: %s\n",
+		       node->name);
+		return;
+	}
+
+	sunxi_factors_register(node, &sun9i_a80_apb1_data,
+			       &sun9i_a80_apb1_lock, reg);
 }
 CLK_OF_DECLARE(sun9i_a80_apb1, "allwinner,sun9i-a80-apb1-clk", sun9i_a80_apb1_setup);