Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This time we have a good set of changes to the core framework that do
  some general cleanups, but nothing too major. The majority of the diff
  goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is
  introduced for Actions Semi so it takes up some lines to add all the
  different types, and the Qualcomm diff is there because we add support
  for two SoCs and it's quite a bit of data.

  Otherwise the big driver updates are on TI Davinci and Amlogic
  platforms. And then the long tail of driver updates for various fixes
  and stuff follows after that.

  Core:
   - debugfs cleanups removing error checking and an unused provider API
   - Removal of a clk init typedef that isn't used
   - Usage of match_string() to simplify parent string name matching
   - OF clk helpers moved to their own file (linux/of_clk.h)
   - Make clk warnings more readable across kernel versions

  New Drivers:
   - Qualcomm SDM845 GCC and Video clk controllers
   - Qualcomm MSM8998 GCC
   - Actions Semi S900 SoC support
   - Nuvoton npcm750 microcontroller clks
   - Amlogic axg AO clock controller

  Removed Drivers:
   - Deprecated Rockchip clk-gate driver

  Updates:
   - debugfs functions stopped checking return values
   - Support for the MSIOF module clocks on Rensas R-Car M3-N
   - Support for the new Rensas RZ/G1C and R-Car E3 SoCs
   - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs
   - Berlin and Amlogic SPDX tagging
   - Usage of of_clk_get_parent_count() in more places
   - Proper implementation of the CDEV1/2 clocks on Tegra20
   - Allwinner H6 PRCM clock support and R40 EMAC support
   - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet
   - Round closest support for meson's mpll driver
   - Support for meson8b nand clocks and gxbb video decoder clocks
   - Mediatek mali clks
   - STM32MP1 fixes
   - Uniphier LD11/LD20 stream demux system clock"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
  clk: qcom: Export clk_fabia_pll_configure()
  clk: bcm: Update and add Stingray clock entries
  dt-bindings: clk: Update Stingray binding doc
  clk-si544: Properly round requested frequency to nearest match
  clk: ingenic: jz4770: Add 150us delay after enabling VPU clock
  clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock
  clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle
  clk: ingenic: jz4770: Change OTG from custom to standard gated clock
  clk: ingenic: Support specifying "wait for clock stable" delay
  clk: ingenic: Add support for clocks whose gate bit is inverted
  clk: use match_string() helper
  clk: bcm2835: use match_string() helper
  clk: Return void from debug_init op
  clk: remove clk_debugfs_add_file()
  clk: tegra: no need to check return value of debugfs_create functions
  clk: davinci: no need to check return value of debugfs_create functions
  clk: bcm2835: no need to check return value of debugfs_create functions
  clk: no need to check return value of debugfs_create functions
  clk: imx6: add EPIT clock support
  clk: mvebu: use correct bit for 98DX3236 NAND
  ...

20 files changed, 586 insertions, 309 deletions

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index d5cbec522aec..815659eebea3 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -3,6 +3,12 @@ config COMMON_CLK_AMLOGIC
 	depends on OF
 	depends on ARCH_MESON || COMPILE_TEST
 
+config COMMON_CLK_MESON_AO
+	bool
+	depends on OF
+	depends on ARCH_MESON || COMPILE_TEST
+	select COMMON_CLK_REGMAP_MESON
+
 config COMMON_CLK_REGMAP_MESON
 	bool
 	select REGMAP
@@ -21,6 +27,7 @@ config COMMON_CLK_GXBB
 	bool
 	depends on COMMON_CLK_AMLOGIC
 	select RESET_CONTROLLER
+	select COMMON_CLK_MESON_AO
 	select COMMON_CLK_REGMAP_MESON
 	select MFD_SYSCON
 	help
@@ -31,6 +38,7 @@ config COMMON_CLK_AXG
 	bool
 	depends on COMMON_CLK_AMLOGIC
 	select RESET_CONTROLLER
+	select COMMON_CLK_MESON_AO
 	select COMMON_CLK_REGMAP_MESON
 	select MFD_SYSCON
 	help
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index ffee82e60b7a..d0d13aeb369a 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -3,7 +3,8 @@
 #
 
 obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o
+obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
 obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
-obj-$(CONFIG_COMMON_CLK_AXG)	 += axg.o
+obj-$(CONFIG_COMMON_CLK_AXG)	 += axg.o axg-aoclk.o
 obj-$(CONFIG_COMMON_CLK_REGMAP_MESON)	+= clk-regmap.o
diff --git a/drivers/clk/meson/axg-aoclk.c b/drivers/clk/meson/axg-aoclk.c
new file mode 100644
index 000000000000..29e088542387
--- /dev/null
+++ b/drivers/clk/meson/axg-aoclk.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson-AXG Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/mfd/syscon.h>
+#include "clk-regmap.h"
+#include "meson-aoclk.h"
+#include "axg-aoclk.h"
+
+#define AXG_AO_GATE(_name, _bit)					\
+static struct clk_regmap axg_aoclk_##_name = {				\
+	.data = &(struct clk_regmap_gate_data) {			\
+		.offset = (AO_RTI_GEN_CNTL_REG0),			\
+		.bit_idx = (_bit),					\
+	},								\
+	.hw.init = &(struct clk_init_data) {				\
+		.name =  "axg_ao_" #_name,				\
+		.ops = &clk_regmap_gate_ops,				\
+		.parent_names = (const char *[]){ "clk81" },		\
+		.num_parents = 1,					\
+		.flags = CLK_IGNORE_UNUSED,				\
+	},								\
+}
+
+AXG_AO_GATE(remote, 0);
+AXG_AO_GATE(i2c_master, 1);
+AXG_AO_GATE(i2c_slave, 2);
+AXG_AO_GATE(uart1, 3);
+AXG_AO_GATE(uart2, 5);
+AXG_AO_GATE(ir_blaster, 6);
+AXG_AO_GATE(saradc, 7);
+
+static struct clk_regmap axg_aoclk_clk81 = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = AO_RTI_PWR_CNTL_REG0,
+		.mask = 0x1,
+		.shift = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "axg_ao_clk81",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_names = (const char *[]){ "clk81", "ao_alt_xtal"},
+		.num_parents = 2,
+	},
+};
+
+static struct clk_regmap axg_aoclk_saradc_mux = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = AO_SAR_CLK,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "axg_ao_saradc_mux",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = (const char *[]){ "xtal", "axg_ao_clk81" },
+		.num_parents = 2,
+	},
+};
+
+static struct clk_regmap axg_aoclk_saradc_div = {
+	.data = &(struct clk_regmap_div_data) {
+		.offset = AO_SAR_CLK,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "axg_ao_saradc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "axg_ao_saradc_mux" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap axg_aoclk_saradc_gate = {
+	.data = &(struct clk_regmap_gate_data) {
+		.offset = AO_SAR_CLK,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "axg_ao_saradc_gate",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "axg_ao_saradc_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const unsigned int axg_aoclk_reset[] = {
+	[RESET_AO_REMOTE]	= 16,
+	[RESET_AO_I2C_MASTER]	= 18,
+	[RESET_AO_I2C_SLAVE]	= 19,
+	[RESET_AO_UART1]	= 17,
+	[RESET_AO_UART2]	= 22,
+	[RESET_AO_IR_BLASTER]	= 23,
+};
+
+static struct clk_regmap *axg_aoclk_regmap[] = {
+	[CLKID_AO_REMOTE]	= &axg_aoclk_remote,
+	[CLKID_AO_I2C_MASTER]	= &axg_aoclk_i2c_master,
+	[CLKID_AO_I2C_SLAVE]	= &axg_aoclk_i2c_slave,
+	[CLKID_AO_UART1]	= &axg_aoclk_uart1,
+	[CLKID_AO_UART2]	= &axg_aoclk_uart2,
+	[CLKID_AO_IR_BLASTER]	= &axg_aoclk_ir_blaster,
+	[CLKID_AO_SAR_ADC]	= &axg_aoclk_saradc,
+	[CLKID_AO_CLK81]	= &axg_aoclk_clk81,
+	[CLKID_AO_SAR_ADC_SEL]	= &axg_aoclk_saradc_mux,
+	[CLKID_AO_SAR_ADC_DIV]	= &axg_aoclk_saradc_div,
+	[CLKID_AO_SAR_ADC_CLK]	= &axg_aoclk_saradc_gate,
+};
+
+static const struct clk_hw_onecell_data axg_aoclk_onecell_data = {
+	.hws = {
+		[CLKID_AO_REMOTE]	= &axg_aoclk_remote.hw,
+		[CLKID_AO_I2C_MASTER]	= &axg_aoclk_i2c_master.hw,
+		[CLKID_AO_I2C_SLAVE]	= &axg_aoclk_i2c_slave.hw,
+		[CLKID_AO_UART1]	= &axg_aoclk_uart1.hw,
+		[CLKID_AO_UART2]	= &axg_aoclk_uart2.hw,
+		[CLKID_AO_IR_BLASTER]	= &axg_aoclk_ir_blaster.hw,
+		[CLKID_AO_SAR_ADC]	= &axg_aoclk_saradc.hw,
+		[CLKID_AO_CLK81]	= &axg_aoclk_clk81.hw,
+		[CLKID_AO_SAR_ADC_SEL]	= &axg_aoclk_saradc_mux.hw,
+		[CLKID_AO_SAR_ADC_DIV]	= &axg_aoclk_saradc_div.hw,
+		[CLKID_AO_SAR_ADC_CLK]	= &axg_aoclk_saradc_gate.hw,
+	},
+	.num = NR_CLKS,
+};
+
+static const struct meson_aoclk_data axg_aoclkc_data = {
+	.reset_reg	= AO_RTI_GEN_CNTL_REG0,
+	.num_reset	= ARRAY_SIZE(axg_aoclk_reset),
+	.reset		= axg_aoclk_reset,
+	.num_clks	= ARRAY_SIZE(axg_aoclk_regmap),
+	.clks		= axg_aoclk_regmap,
+	.hw_data	= &axg_aoclk_onecell_data,
+};
+
+static const struct of_device_id axg_aoclkc_match_table[] = {
+	{
+		.compatible	= "amlogic,meson-axg-aoclkc",
+		.data		= &axg_aoclkc_data,
+	},
+	{ }
+};
+
+static struct platform_driver axg_aoclkc_driver = {
+	.probe		= meson_aoclkc_probe,
+	.driver		= {
+		.name	= "axg-aoclkc",
+		.of_match_table = axg_aoclkc_match_table,
+	},
+};
+
+builtin_platform_driver(axg_aoclkc_driver);
diff --git a/drivers/clk/meson/axg-aoclk.h b/drivers/clk/meson/axg-aoclk.h
new file mode 100644
index 000000000000..91384d8dd844
--- /dev/null
+++ b/drivers/clk/meson/axg-aoclk.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#ifndef __AXG_AOCLKC_H
+#define __AXG_AOCLKC_H
+
+#define NR_CLKS	11
+/* AO Configuration Clock registers offsets
+ * Register offsets from the data sheet must be multiplied by 4.
+ */
+#define AO_RTI_PWR_CNTL_REG1	0x0C
+#define AO_RTI_PWR_CNTL_REG0	0x10
+#define AO_RTI_GEN_CNTL_REG0	0x40
+#define AO_OSCIN_CNTL		0x58
+#define AO_CRT_CLK_CNTL1	0x68
+#define AO_SAR_CLK		0x90
+#define AO_RTC_ALT_CLK_CNTL0	0x94
+#define AO_RTC_ALT_CLK_CNTL1	0x98
+
+#include <dt-bindings/clock/axg-aoclkc.h>
+#include <dt-bindings/reset/axg-aoclkc.h>
+
+#endif /* __AXG_AOCLKC_H */
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
index 5f5d468c1efe..bd4dbc696b88 100644
--- a/drivers/clk/meson/axg.c
+++ b/drivers/clk/meson/axg.c
@@ -461,6 +461,7 @@ static struct clk_regmap axg_mpll0_div = {
 			.width	 = 1,
 		},
 		.lock = &meson_clk_lock,
+		.flags = CLK_MESON_MPLL_ROUND_CLOSEST,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "mpll0_div",
@@ -507,6 +508,7 @@ static struct clk_regmap axg_mpll1_div = {
 			.width	 = 1,
 		},
 		.lock = &meson_clk_lock,
+		.flags = CLK_MESON_MPLL_ROUND_CLOSEST,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "mpll1_div",
@@ -553,6 +555,7 @@ static struct clk_regmap axg_mpll2_div = {
 			.width	 = 1,
 		},
 		.lock = &meson_clk_lock,
+		.flags = CLK_MESON_MPLL_ROUND_CLOSEST,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "mpll2_div",
@@ -599,6 +602,7 @@ static struct clk_regmap axg_mpll3_div = {
 			.width	 = 1,
 		},
 		.lock = &meson_clk_lock,
+		.flags = CLK_MESON_MPLL_ROUND_CLOSEST,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "mpll3_div",
diff --git a/drivers/clk/meson/clk-audio-divider.c b/drivers/clk/meson/clk-audio-divider.c
index f7ab5b1db342..58f546e04807 100644
--- a/drivers/clk/meson/clk-audio-divider.c
+++ b/drivers/clk/meson/clk-audio-divider.c
@@ -1,18 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2017 AmLogic, Inc.
  * Author: Jerome Brunet <jbrunet@baylibre.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 /*
diff --git a/drivers/clk/meson/clk-mpll.c b/drivers/clk/meson/clk-mpll.c
index 0df1227b65b3..650f75cc15a9 100644
--- a/drivers/clk/meson/clk-mpll.c
+++ b/drivers/clk/meson/clk-mpll.c
@@ -1,57 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /*
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright (c) 2016 AmLogic, Inc.
- * Author: Michael Turquette <mturquette@baylibre.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called COPYING
- *
- * BSD LICENSE
- *
  * Copyright (c) 2016 AmLogic, Inc.
  * Author: Michael Turquette <mturquette@baylibre.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
 /*
@@ -89,10 +39,23 @@ static long rate_from_params(unsigned long parent_rate,
 static void params_from_rate(unsigned long requested_rate,
 			     unsigned long parent_rate,
 			     unsigned int *sdm,
-			     unsigned int *n2)
+			     unsigned int *n2,
+			     u8 flags)
 {
 	uint64_t div = parent_rate;
-	unsigned long rem = do_div(div, requested_rate);
+	uint64_t frac = do_div(div, requested_rate);
+
+	frac *= SDM_DEN;
+
+	if (flags & CLK_MESON_MPLL_ROUND_CLOSEST)
+		*sdm = DIV_ROUND_CLOSEST_ULL(frac, requested_rate);
+	else
+		*sdm = DIV_ROUND_UP_ULL(frac, requested_rate);
+
+	if (*sdm == SDM_DEN) {
+		*sdm = 0;
+		div += 1;
+	}
 
 	if (div < N2_MIN) {
 		*n2 = N2_MIN;
@@ -102,7 +65,6 @@ static void params_from_rate(unsigned long requested_rate,
 		*sdm = SDM_DEN - 1;
 	} else {
 		*n2 = div;
-		*sdm = DIV_ROUND_UP_ULL((u64)rem * SDM_DEN, requested_rate);
 	}
 }
 
@@ -125,9 +87,11 @@ static long mpll_round_rate(struct clk_hw *hw,
 			    unsigned long rate,
 			    unsigned long *parent_rate)
 {
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_clk_mpll_data *mpll = meson_clk_mpll_data(clk);
 	unsigned int sdm, n2;
 
-	params_from_rate(rate, *parent_rate, &sdm, &n2);
+	params_from_rate(rate, *parent_rate, &sdm, &n2, mpll->flags);
 	return rate_from_params(*parent_rate, sdm, n2);
 }
 
@@ -140,7 +104,7 @@ static int mpll_set_rate(struct clk_hw *hw,
 	unsigned int sdm, n2;
 	unsigned long flags = 0;
 
-	params_from_rate(rate, parent_rate, &sdm, &n2);
+	params_from_rate(rate, parent_rate, &sdm, &n2, mpll->flags);
 
 	if (mpll->lock)
 		spin_lock_irqsave(mpll->lock, flags);
diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
index 65a7bd903551..3e04617ac47f 100644
--- a/drivers/clk/meson/clk-pll.c
+++ b/drivers/clk/meson/clk-pll.c
@@ -1,21 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2015 Endless Mobile, Inc.
  * Author: Carlo Caione <carlo@endlessm.com>
  *
  * Copyright (c) 2018 Baylibre, SAS.
  * Author: Jerome Brunet <jbrunet@baylibre.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 /*
diff --git a/drivers/clk/meson/clk-regmap.c b/drivers/clk/meson/clk-regmap.c
index ab7a3556f5b2..305ee307c003 100644
--- a/drivers/clk/meson/clk-regmap.c
+++ b/drivers/clk/meson/clk-regmap.c
@@ -1,6 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018 BayLibre, SAS.
-// Author: Jerome Brunet <jbrunet@baylibre.com>
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
 
 #include "clk-regmap.h"
 
diff --git a/drivers/clk/meson/clk-regmap.h b/drivers/clk/meson/clk-regmap.h
index 627c888026d7..ed2d4348dbe2 100644
--- a/drivers/clk/meson/clk-regmap.h
+++ b/drivers/clk/meson/clk-regmap.h
@@ -1,6 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018 BayLibre, SAS.
-// Author: Jerome Brunet <jbrunet@baylibre.com>
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
 
 #ifndef __CLK_REGMAP_H
 #define __CLK_REGMAP_H
diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
index 8fe73c4edca8..2fb084330ee9 100644
--- a/drivers/clk/meson/clkc.h
+++ b/drivers/clk/meson/clkc.h
@@ -1,18 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (c) 2015 Endless Mobile, Inc.
  * Author: Carlo Caione <carlo@endlessm.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 #ifndef __CLKC_H
@@ -97,8 +86,11 @@ struct meson_clk_mpll_data {
 	struct parm ssen;
 	struct parm misc;
 	spinlock_t *lock;
+	u8 flags;
 };
 
+#define CLK_MESON_MPLL_ROUND_CLOSEST	BIT(0)
+
 struct meson_clk_audio_div_data {
 	struct parm div;
 	u8 flags;
diff --git a/drivers/clk/meson/gxbb-aoclk-32k.c b/drivers/clk/meson/gxbb-aoclk-32k.c
index 491634dbc985..680467141a1d 100644
--- a/drivers/clk/meson/gxbb-aoclk-32k.c
+++ b/drivers/clk/meson/gxbb-aoclk-32k.c
@@ -1,8 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (c) 2017 BayLibre, SAS.
  * Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
  */
 
 #include <linux/clk-provider.h>
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index 9ec23ae9a219..42ed61d3c3fb 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -1,90 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /*
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
  * Copyright (c) 2016 BayLibre, SAS.
  * Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- * The full GNU General Public License is included in this distribution
- * in the file called COPYING.
- *
- * BSD LICENSE
- *
- * Copyright (c) 2016 BayLibre, SAS.
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
-#include <linux/clk-provider.h>
-#include <linux/of_address.h>
 #include <linux/platform_device.h>
-#include <linux/reset-controller.h>
 #include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <dt-bindings/clock/gxbb-aoclkc.h>
-#include <dt-bindings/reset/gxbb-aoclkc.h>
 #include "clk-regmap.h"
+#include "meson-aoclk.h"
 #include "gxbb-aoclk.h"
 
-struct gxbb_aoclk_reset_controller {
-	struct reset_controller_dev reset;
-	unsigned int *data;
-	struct regmap *regmap;
-};
-
-static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
-			       unsigned long id)
-{
-	struct gxbb_aoclk_reset_controller *reset =
-		container_of(rcdev, struct gxbb_aoclk_reset_controller, reset);
-
-	return regmap_write(reset->regmap, AO_RTI_GEN_CNTL_REG0,
-			    BIT(reset->data[id]));
-}
-
-static const struct reset_control_ops gxbb_aoclk_reset_ops = {
-	.reset = gxbb_aoclk_do_reset,
-};
-
 #define GXBB_AO_GATE(_name, _bit)					\
 static struct clk_regmap _name##_ao = {					\
 	.data = &(struct clk_regmap_gate_data) {			\
@@ -96,7 +20,7 @@ static struct clk_regmap _name##_ao = {					\
 		.ops = &clk_regmap_gate_ops,				\
 		.parent_names = (const char *[]){ "clk81" },		\
 		.num_parents = 1,					\
-		.flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED),	\
+		.flags = CLK_IGNORE_UNUSED,				\
 	},								\
 }
 
@@ -117,7 +41,7 @@ static struct aoclk_cec_32k cec_32k_ao = {
 	},
 };
 
-static unsigned int gxbb_aoclk_reset[] = {
+static const unsigned int gxbb_aoclk_reset[] = {
 	[RESET_AO_REMOTE] = 16,
 	[RESET_AO_I2C_MASTER] = 18,
 	[RESET_AO_I2C_SLAVE] = 19,
@@ -135,7 +59,7 @@ static struct clk_regmap *gxbb_aoclk_gate[] = {
 	[CLKID_AO_IR_BLASTER] = &ir_blaster_ao,
 };
 
-static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
+static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
 	.hws = {
 		[CLKID_AO_REMOTE] = &remote_ao.hw,
 		[CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw,
@@ -145,58 +69,55 @@ static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
 		[CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw,
 		[CLKID_AO_CEC_32K] = &cec_32k_ao.hw,
 	},
-	.num = 7,
+	.num = NR_CLKS,
 };
 
-static int gxbb_aoclkc_probe(struct platform_device *pdev)
+static int gxbb_register_cec_ao_32k(struct platform_device *pdev)
 {
-	struct gxbb_aoclk_reset_controller *rstc;
 	struct device *dev = &pdev->dev;
 	struct regmap *regmap;
-	int ret, clkid;
-
-	rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
-	if (!rstc)
-		return -ENOMEM;
+	int ret;
 
 	regmap = syscon_node_to_regmap(of_get_parent(dev->of_node));
 	if (IS_ERR(regmap)) {
 		dev_err(dev, "failed to get regmap\n");
-		return -ENODEV;
-	}
-
-	/* Reset Controller */
-	rstc->regmap = regmap;
-	rstc->data = gxbb_aoclk_reset;
-	rstc->reset.ops = &gxbb_aoclk_reset_ops;
-	rstc->reset.nr_resets = ARRAY_SIZE(gxbb_aoclk_reset);
-	rstc->reset.of_node = dev->of_node;
-	ret = devm_reset_controller_register(dev, &rstc->reset);
-
-	/*
-	 * Populate regmap and register all clks
-	 */
-	for (clkid = 0; clkid < ARRAY_SIZE(gxbb_aoclk_gate); clkid++) {
-		gxbb_aoclk_gate[clkid]->map = regmap;
-
-		ret = devm_clk_hw_register(dev,
-					   gxbb_aoclk_onecell_data.hws[clkid]);
-		if (ret)
-			return ret;
+		return PTR_ERR(regmap);
 	}
 
 	/* Specific clocks */
 	cec_32k_ao.regmap = regmap;
 	ret = devm_clk_hw_register(dev, &cec_32k_ao.hw);
+	if (ret) {
+		dev_err(&pdev->dev, "clk cec_32k_ao register failed.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct meson_aoclk_data gxbb_aoclkc_data = {
+	.reset_reg	= AO_RTI_GEN_CNTL_REG0,
+	.num_reset	= ARRAY_SIZE(gxbb_aoclk_reset),
+	.reset		= gxbb_aoclk_reset,
+	.num_clks	= ARRAY_SIZE(gxbb_aoclk_gate),
+	.clks		= gxbb_aoclk_gate,
+	.hw_data	= &gxbb_aoclk_onecell_data,
+};
+
+static int gxbb_aoclkc_probe(struct platform_device *pdev)
+{
+	int ret = gxbb_register_cec_ao_32k(pdev);
 	if (ret)
 		return ret;
 
-	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
-			&gxbb_aoclk_onecell_data);
+	return meson_aoclkc_probe(pdev);
 }
 
 static const struct of_device_id gxbb_aoclkc_match_table[] = {
-	{ .compatible = "amlogic,meson-gx-aoclkc" },
+	{
+		.compatible	= "amlogic,meson-gx-aoclkc",
+		.data		= &gxbb_aoclkc_data,
+	},
 	{ }
 };
 
diff --git a/drivers/clk/meson/gxbb-aoclk.h b/drivers/clk/meson/gxbb-aoclk.h
index badc4c22b4ee..c514493d989a 100644
--- a/drivers/clk/meson/gxbb-aoclk.h
+++ b/drivers/clk/meson/gxbb-aoclk.h
@@ -1,13 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (c) 2017 BayLibre, SAS
  * Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
  */
 
 #ifndef __GXBB_AOCLKC_H
 #define __GXBB_AOCLKC_H
 
+#define NR_CLKS	7
+
 /* AO Configuration Clock registers offsets */
 #define AO_RTI_PWR_CNTL_REG1	0x0c
 #define AO_RTI_PWR_CNTL_REG0	0x10
@@ -26,4 +27,7 @@ struct aoclk_cec_32k {
 
 extern const struct clk_ops meson_aoclk_cec_32k_ops;
 
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
+
 #endif /* __GXBB_AOCLKC_H */
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index b1e4d9557610..240658404367 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -1,20 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * AmLogic S905 / GXBB Clock Controller Driver
- *
  * Copyright (c) 2016 AmLogic, Inc.
  * Michael Turquette <mturquette@baylibre.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <linux/clk.h>
@@ -1543,6 +1530,102 @@ static struct clk_regmap gxbb_vapb = {
 	},
 };
 
+/* VDEC clocks */
+
+static const char * const gxbb_vdec_parent_names[] = {
+	"fclk_div4", "fclk_div3", "fclk_div5", "fclk_div7"
+};
+
+static struct clk_regmap gxbb_vdec_1_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_VDEC_CLK_CNTL,
+		.mask = 0x3,
+		.shift