diff options
author | Fabio Estevam <fabio.estevam@nxp.com> | 2016-10-17 22:29:14 -0200 |
---|---|---|
committer | Shawn Guo <shawnguo@kernel.org> | 2016-11-01 20:55:30 +0800 |
commit | 5d283b083800867dc329e6433576664bf0fc18d5 (patch) | |
tree | 363d90d404152bdf67e62b574647044036e85770 /drivers/clk/imx/clk-imx6q.c | |
parent | 03d576f202e8cd40d500aa4f7594ad702d861096 (diff) |
clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK
Due to incorrect placement of the clock gate cell in the ldb_di[x]_clk
tree, the glitchy parent mux of ldb_di[x]_clk can cause a glitch to
enter the ldb_di_ipu_div divider. If the divider gets locked up, no
ldb_di[x]_clk is generated, and the LVDS display will hang when the
ipu_di_clk is sourced from ldb_di_clk.
To fix the problem, both the new and current parent of the ldb_di_clk
should be disabled before the switch. This patch ensures that correct
steps are followed when ldb_di_clk parent is switched in the beginning
of boot. The glitchy muxes are then registered as read-only. The clock
parent can be selected using the assigned-clocks and
assigned-clock-parents properties of the ccm device tree node:
&clks {
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
assigned-clock-parents = <&clks IMX6QDL_CLK_MMDC_CH1_AXI>,
<&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
};
The issue is explained in detail in EB821 ("LDB Clock Switch Procedure &
i.MX6 Asynchronous Clock Switching Guidelines") [1].
[1] http://www.nxp.com/files/32bit/doc/eng_bulletin/EB821.pdf
Signed-off-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@nxp.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Akshay Bhat <akshay.bhat@timesys.com>
Tested-by Joshua Clayton <stillcompiling@gmail.com>
Tested-by: Charles Kang <Charles.Kang@advantech.com.tw>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'drivers/clk/imx/clk-imx6q.c')
-rw-r--r-- | drivers/clk/imx/clk-imx6q.c | 264 |
1 files changed, 259 insertions, 5 deletions
diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c index a4f4de5c9cb2..42ffc1c92bab 100644 --- a/drivers/clk/imx/clk-imx6q.c +++ b/drivers/clk/imx/clk-imx6q.c @@ -156,9 +156,90 @@ static struct clk ** const uart_clks[] __initconst = { NULL }; +static int ldb_di_sel_by_clock_id(int clock_id) +{ + switch (clock_id) { + case IMX6QDL_CLK_PLL5_VIDEO_DIV: + if (clk_on_imx6q() && + imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) + return -ENOENT; + return 0; + case IMX6QDL_CLK_PLL2_PFD0_352M: + return 1; + case IMX6QDL_CLK_PLL2_PFD2_396M: + return 2; + case IMX6QDL_CLK_MMDC_CH1_AXI: + return 3; + case IMX6QDL_CLK_PLL3_USB_OTG: + return 4; + default: + return -ENOENT; + } +} + +static void of_assigned_ldb_sels(struct device_node *node, + unsigned int *ldb_di0_sel, + unsigned int *ldb_di1_sel) +{ + struct of_phandle_args clkspec; + int index, rc, num_parents; + int parent, child, sel; + + num_parents = of_count_phandle_with_args(node, "assigned-clock-parents", + "#clock-cells"); + for (index = 0; index < num_parents; index++) { + rc = of_parse_phandle_with_args(node, "assigned-clock-parents", + "#clock-cells", index, &clkspec); + if (rc < 0) { + /* skip empty (null) phandles */ + if (rc == -ENOENT) + continue; + else + return; + } + if (clkspec.np != node || clkspec.args[0] >= IMX6QDL_CLK_END) { + pr_err("ccm: parent clock %d not in ccm\n", index); + return; + } + parent = clkspec.args[0]; + + rc = of_parse_phandle_with_args(node, "assigned-clocks", + "#clock-cells", index, &clkspec); + if (rc < 0) + return; + if (clkspec.np != node || clkspec.args[0] >= IMX6QDL_CLK_END) { + pr_err("ccm: child clock %d not in ccm\n", index); + return; + } + child = clkspec.args[0]; + + if (child != IMX6QDL_CLK_LDB_DI0_SEL && + child != IMX6QDL_CLK_LDB_DI1_SEL) + continue; + + sel = ldb_di_sel_by_clock_id(parent); + if (sel < 0) { + pr_err("ccm: invalid ldb_di%d parent clock: %d\n", + child == IMX6QDL_CLK_LDB_DI1_SEL, parent); + continue; + } + + if (child == IMX6QDL_CLK_LDB_DI0_SEL) + *ldb_di0_sel = sel; + if (child == IMX6QDL_CLK_LDB_DI1_SEL) + *ldb_di1_sel = sel; + } +} + #define CCM_CCDR 0x04 +#define CCM_CCSR 0x0c +#define CCM_CS2CDR 0x2c + +#define CCDR_MMDC_CH1_MASK BIT(16) +#define CCSR_PLL3_SW_CLK_SEL BIT(0) -#define CCDR_MMDC_CH1_MASK BIT(16) +#define CS2CDR_LDB_DI0_CLK_SEL_SHIFT 9 +#define CS2CDR_LDB_DI1_CLK_SEL_SHIFT 12 static void __init imx6q_mmdc_ch1_mask_handshake(void __iomem *ccm_base) { @@ -169,10 +250,173 @@ static void __init imx6q_mmdc_ch1_mask_handshake(void __iomem *ccm_base) writel_relaxed(reg, ccm_base + CCM_CCDR); } +/* + * The only way to disable the MMDC_CH1 clock is to move it to pll3_sw_clk + * via periph2_clk2_sel and then to disable pll3_sw_clk by selecting the + * bypass clock source, since there is no CG bit for mmdc_ch1. + */ +static void mmdc_ch1_disable(void __iomem *ccm_base) +{ + unsigned int reg; + + clk_set_parent(clk[IMX6QDL_CLK_PERIPH2_CLK2_SEL], + clk[IMX6QDL_CLK_PLL3_USB_OTG]); + + /* + * Handshake with mmdc_ch1 module must be masked when changing + * periph2_clk_sel. + */ + clk_set_parent(clk[IMX6QDL_CLK_PERIPH2], clk[IMX6QDL_CLK_PERIPH2_CLK2]); + + /* Disable pll3_sw_clk by selecting the bypass clock source */ + reg = readl_relaxed(ccm_base + CCM_CCSR); + reg |= CCSR_PLL3_SW_CLK_SEL; + writel_relaxed(reg, ccm_base + CCM_CCSR); +} + +static void mmdc_ch1_reenable(void __iomem *ccm_base) +{ + unsigned int reg; + + /* Enable pll3_sw_clk by disabling the bypass */ + reg = readl_relaxed(ccm_base + CCM_CCSR); + reg &= ~CCSR_PLL3_SW_CLK_SEL; + writel_relaxed(reg, ccm_base + CCM_CCSR); + + clk_set_parent(clk[IMX6QDL_CLK_PERIPH2], clk[IMX6QDL_CLK_PERIPH2_PRE]); +} + +/* + * We have to follow a strict procedure when changing the LDB clock source, + * otherwise we risk introducing a glitch that can lock up the LDB divider. + * Things to keep in mind: + * + * 1. The current and new parent clock inputs to the mux must be disabled. + * 2. The default clock input for ldb_di0/1_clk_sel is mmdc_ch1_axi, which + * has no CG bit. + * 3. pll2_pfd2_396m can not be gated if it is used as memory clock. + * 4. In the RTL implementation of the LDB_DI_CLK_SEL muxes the top four + * options are in one mux and the PLL3 option along with three unused + * inputs is in a second mux. There is a third mux with two inputs used + * to decide between the first and second 4-port mux: + * + * pll5_video_div 0 --|\ + * pll2_pfd0_352m 1 --| |_ + * pll2_pfd2_396m 2 --| | `-|\ + * mmdc_ch1_axi 3 --|/ | | + * | |-- + * pll3_usb_otg 4 --|\ | | + * 5 --| |_,-|/ + * 6 --| | + * 7 --|/ + * + * The ldb_di0/1_clk_sel[1:0] bits control both 4-port muxes at the same time. + * The ldb_di0/1_clk_sel[2] bit controls the 2-port mux. The code below + * switches the parent to the bottom mux first and then manipulates the top + * mux to ensure that no glitch will enter the divider. + */ +static void init_ldb_clks(struct device_node *np, void __iomem *ccm_base) +{ + unsigned int reg; + unsigned int sel[2][4]; + int i; + + reg = readl_relaxed(ccm_base + CCM_CS2CDR); + sel[0][0] = (reg >> CS2CDR_LDB_DI0_CLK_SEL_SHIFT) & 7; + sel[1][0] = (reg >> CS2CDR_LDB_DI1_CLK_SEL_SHIFT) & 7; + + sel[0][3] = sel[0][2] = sel[0][1] = sel[0][0]; + sel[1][3] = sel[1][2] = sel[1][1] = sel[1][0]; + + of_assigned_ldb_sels(np, &sel[0][3], &sel[1][3]); + + for (i = 0; i < 2; i++) { + /* Warn if a glitch might have been introduced already */ + if (sel[i][0] != 3) { + pr_warn("ccm: ldb_di%d_sel already changed from reset value: %d\n", + i, sel[i][0]); + } + + if (sel[i][0] == sel[i][3]) + continue; + + /* Only switch to or from pll2_pfd2_396m if it is disabled */ + if ((sel[i][0] == 2 || sel[i][3] == 2) && + (clk_get_parent(clk[IMX6QDL_CLK_PERIPH_PRE]) == + clk[IMX6QDL_CLK_PLL2_PFD2_396M])) { + pr_err("ccm: ldb_di%d_sel: couldn't disable pll2_pfd2_396m\n", + i); + sel[i][3] = sel[i][2] = sel[i][1] = sel[i][0]; + continue; + } + + /* First switch to the bottom mux */ + sel[i][1] = sel[i][0] | 4; + + /* Then configure the top mux before switching back to it */ + sel[i][2] = sel[i][3] | 4; + + pr_debug("ccm: switching ldb_di%d_sel: %d->%d->%d->%d\n", i, + sel[i][0], sel[i][1], sel[i][2], sel[i][3]); + } + + if (sel[0][0] == sel[0][3] && sel[1][0] == sel[1][3]) + return; + + mmdc_ch1_disable(ccm_base); + + for (i = 1; i < 4; i++) { + reg = readl_relaxed(ccm_base + CCM_CS2CDR); + reg &= ~((7 << CS2CDR_LDB_DI0_CLK_SEL_SHIFT) | + (7 << CS2CDR_LDB_DI1_CLK_SEL_SHIFT)); + reg |= ((sel[0][i] << CS2CDR_LDB_DI0_CLK_SEL_SHIFT) | + (sel[1][i] << CS2CDR_LDB_DI1_CLK_SEL_SHIFT)); + writel_relaxed(reg, ccm_base + CCM_CS2CDR); + } + + mmdc_ch1_reenable(ccm_base); +} + +#define CCM_ANALOG_PLL_VIDEO 0xa0 +#define CCM_ANALOG_PFD_480 0xf0 +#define CCM_ANALOG_PFD_528 0x100 + +#define PLL_ENABLE BIT(13) + +#define PFD0_CLKGATE BIT(7) +#define PFD1_CLKGATE BIT(15) +#define PFD2_CLKGATE BIT(23) +#define PFD3_CLKGATE BIT(31) + +static void disable_anatop_clocks(void __iomem *anatop_base) +{ + unsigned int reg; + + /* Make sure PLL2 PFDs 0-2 are gated */ + reg = readl_relaxed(anatop_base + CCM_ANALOG_PFD_528); + /* Cannot gate PFD2 if pll2_pfd2_396m is the parent of MMDC clock */ + if (clk_get_parent(clk[IMX6QDL_CLK_PERIPH_PRE]) == + clk[IMX6QDL_CLK_PLL2_PFD2_396M]) + reg |= PFD0_CLKGATE | PFD1_CLKGATE; + else + reg |= PFD0_CLKGATE | PFD1_CLKGATE | PFD2_CLKGATE; + writel_relaxed(reg, anatop_base + CCM_ANALOG_PFD_528); + + /* Make sure PLL3 PFDs 0-3 are gated */ + reg = readl_relaxed(anatop_base + CCM_ANALOG_PFD_480); + reg |= PFD0_CLKGATE | PFD1_CLKGATE | PFD2_CLKGATE | PFD3_CLKGATE; + writel_relaxed(reg, anatop_base + CCM_ANALOG_PFD_480); + + /* Make sure PLL5 is disabled */ + reg = readl_relaxed(anatop_base + CCM_ANALOG_PLL_VIDEO); + reg &= ~PLL_ENABLE; + writel_relaxed(reg, anatop_base + CCM_ANALOG_PLL_VIDEO); +} + static void __init imx6q_clocks_init(struct device_node *ccm_node) { struct device_node *np; - void __iomem *base; + void __iomem *anatop_base, *base; int i; int ret; @@ -185,7 +429,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_ANACLK2] = imx_obtain_fixed_clock("anaclk2", 0); np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); - base = of_iomap(np, 0); + anatop_base = base = of_iomap(np, 0); WARN_ON(!base); /* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */ @@ -310,8 +554,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) base = of_iomap(np, 0); WARN_ON(!base); - imx6q_mmdc_ch1_mask_handshake(base); - /* name reg shift width parent_names num_parents */ clk[IMX6QDL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); clk[IMX6QDL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); @@ -345,6 +587,18 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels)); clk[IMX6QDL_CLK_IPU1_SEL] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); clk[IMX6QDL_CLK_IPU2_SEL] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); + + disable_anatop_clocks(anatop_base); + + imx6q_mmdc_ch1_mask_handshake(base); + + /* + * The LDB_DI0/1_SEL muxes are registered read-only due to a hardware + * bug. Set the muxes to the requested values before registering the + * ldb_di_sel clocks. + */ + init_ldb_clks(np, base); + clk[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_mux_ldb("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels)); clk[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_mux_ldb("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels)); clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); |