Char: ip2, macros cleanup

- remove i2os.h -- there was only macro to macro renaming or useless
  stuff
- remove another uselless stuf (NULLFUNC, NULLPTR, YES, NO)
- use outb/inb directly
- use locking functions directly
- don't define another ROUNDUP, use roundup(x, 2) instead
- some comments and whitespace cleanup
- remove some commented crap
- prepend the rest by I2 prefix to not collide with rest of the world
  like in following output (pointed out by akpm)

In file included from drivers/char/ip2/ip2main.c:128:
drivers/char/ip2/i2ellis.h:608:1: warning: "COMPLETE" redefined
In file included from include/net/netns/ipv4.h:8,
                 from include/net/net_namespace.h:13,
                 from include/linux/seq_file.h:7,
                 from include/asm/machdep.h:12,
                 from include/asm/pci.h:17,
                 from include/linux/pci.h:951,
                 from drivers/char/ip2/ip2main.c:95:
include/net/inet_frag.h:28:1: warning: this is the location of the previous definition

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

6 files changed, 211 insertions, 383 deletions

diff --git a/drivers/char/ip2/i2ellis.c b/drivers/char/ip2/i2ellis.c
index 61ef013b8445..3601017f58cf 100644
--- a/drivers/char/ip2/i2ellis.c
+++ b/drivers/char/ip2/i2ellis.c
@@ -53,7 +53,7 @@ static int ii2Safe;         // Safe I/O address for delay routine
 
 static int iiDelayed;	// Set when the iiResetDelay function is
 							// called. Cleared when ANY board is reset.
-static rwlock_t Dl_spinlock;
+static DEFINE_RWLOCK(Dl_spinlock);
 
 //********
 //* Code *
@@ -82,7 +82,6 @@ static rwlock_t Dl_spinlock;
 static void
 iiEllisInit(void)
 {
-	LOCK_INIT(&Dl_spinlock);
 }
 
 //******************************************************************************
@@ -132,7 +131,7 @@ iiSetAddress( i2eBordStrPtr pB, int address, delayFunc_t delay )
 		|| (address & 0x7)
 		)
 	{
-		COMPLETE(pB,I2EE_BADADDR);
+		I2_COMPLETE(pB, I2EE_BADADDR);
 	}
 
 	// Initialize accelerators
@@ -152,7 +151,7 @@ iiSetAddress( i2eBordStrPtr pB, int address, delayFunc_t delay )
 	pB->i2eValid = I2E_MAGIC;
 	pB->i2eState = II_STATE_COLD;
 
-	COMPLETE(pB, I2EE_GOOD);
+	I2_COMPLETE(pB, I2EE_GOOD);
 }
 
 //******************************************************************************
@@ -177,12 +176,12 @@ iiReset(i2eBordStrPtr pB)
 	// Magic number should be set, else even the address is suspect
 	if (pB->i2eValid != I2E_MAGIC)
 	{
-		COMPLETE(pB, I2EE_BADMAGIC);
+		I2_COMPLETE(pB, I2EE_BADMAGIC);
 	}
 
-	OUTB(pB->i2eBase + FIFO_RESET, 0);  // Any data will do
+	outb(0, pB->i2eBase + FIFO_RESET);  /* Any data will do */
 	iiDelay(pB, 50);                    // Pause between resets
-	OUTB(pB->i2eBase + FIFO_RESET, 0);  // Second reset
+	outb(0, pB->i2eBase + FIFO_RESET);  /* Second reset */
 
 	// We must wait before even attempting to read anything from the FIFO: the
 	// board's P.O.S.T may actually attempt to read and write its end of the
@@ -203,7 +202,7 @@ iiReset(i2eBordStrPtr pB)
 	// Ensure anything which would have been of use to standard loadware is
 	// blanked out, since board has now forgotten everything!.
 
-	pB->i2eUsingIrq = IRQ_UNDEFINED; // Not set up to use an interrupt yet
+	pB->i2eUsingIrq = I2_IRQ_UNDEFINED; /* to not use an interrupt so far */
 	pB->i2eWaitingForEmptyFifo = 0;
 	pB->i2eOutMailWaiting = 0;
 	pB->i2eChannelPtr = NULL;
@@ -215,7 +214,7 @@ iiReset(i2eBordStrPtr pB)
 	pB->i2eFatalTrap = NULL;
 	pB->i2eFatal = 0;
 
-	COMPLETE(pB, I2EE_GOOD);
+	I2_COMPLETE(pB, I2EE_GOOD);
 }
 
 //******************************************************************************
@@ -235,14 +234,14 @@ static int
 iiResetDelay(i2eBordStrPtr pB)
 {
 	if (pB->i2eValid != I2E_MAGIC) {
-		COMPLETE(pB, I2EE_BADMAGIC);
+		I2_COMPLETE(pB, I2EE_BADMAGIC);
 	}
 	if (pB->i2eState != II_STATE_RESET) {
-		COMPLETE(pB, I2EE_BADSTATE);
+		I2_COMPLETE(pB, I2EE_BADSTATE);
 	}
 	iiDelay(pB,2000);       /* Now we wait for two seconds. */
 	iiDelayed = 1;          /* Delay has been called: ok to initialize */
-	COMPLETE(pB, I2EE_GOOD);
+	I2_COMPLETE(pB, I2EE_GOOD);
 }
 
 //******************************************************************************
@@ -273,12 +272,12 @@ iiInitialize(i2eBordStrPtr pB)
 
 	if (pB->i2eValid != I2E_MAGIC)
 	{
-		COMPLETE(pB, I2EE_BADMAGIC);
+		I2_COMPLETE(pB, I2EE_BADMAGIC);
 	}
 
 	if (pB->i2eState != II_STATE_RESET || !iiDelayed)
 	{
-		COMPLETE(pB, I2EE_BADSTATE);
+		I2_COMPLETE(pB, I2EE_BADSTATE);
 	}
 
 	// In case there is a failure short of our completely reading the power-up
@@ -291,13 +290,12 @@ iiInitialize(i2eBordStrPtr pB)
 	for (itemp = 0; itemp < sizeof(porStr); itemp++)
 	{
 		// We expect the entire message is ready.
-		if (HAS_NO_INPUT(pB))
-		{
+		if (!I2_HAS_INPUT(pB)) {
 			pB->i2ePomSize = itemp;
-			COMPLETE(pB, I2EE_PORM_SHORT);
+			I2_COMPLETE(pB, I2EE_PORM_SHORT);
 		}
 
-		pB->i2ePom.c[itemp] = c = BYTE_FROM(pB);
+		pB->i2ePom.c[itemp] = c = inb(pB->i2eData);
 
 		// We check the magic numbers as soon as they are supposed to be read
 		// (rather than after) to minimize effect of reading something we
@@ -306,22 +304,22 @@ iiInitialize(i2eBordStrPtr pB)
 				(itemp == POR_2_INDEX && c != POR_MAGIC_2))
 		{
 			pB->i2ePomSize = itemp+1;
-			COMPLETE(pB, I2EE_BADMAGIC);
+			I2_COMPLETE(pB, I2EE_BADMAGIC);
 		}
 	}
 
 	pB->i2ePomSize = itemp;
 
 	// Ensure that this was all the data...
-	if (HAS_INPUT(pB))
-		COMPLETE(pB, I2EE_PORM_LONG);
+	if (I2_HAS_INPUT(pB))
+		I2_COMPLETE(pB, I2EE_PORM_LONG);
 
 	// For now, we'll fail to initialize if P.O.S.T reports bad chip mapper:
 	// Implying we will not be able to download any code either:  That's ok: the
 	// condition is pretty explicit.
 	if (pB->i2ePom.e.porDiag1 & POR_BAD_MAPPER)
 	{
-		COMPLETE(pB, I2EE_POSTERR);
+		I2_COMPLETE(pB, I2EE_POSTERR);
 	}
 
 	// Determine anything which must be done differently depending on the family
@@ -332,7 +330,7 @@ iiInitialize(i2eBordStrPtr pB)
 
 		pB->i2eFifoStyle   = FIFO_II;
 		pB->i2eFifoSize    = 512;     // 512 bytes, always
-		pB->i2eDataWidth16 = NO;
+		pB->i2eDataWidth16 = false;
 
 		pB->i2eMaxIrq = 15;	// Because board cannot tell us it is in an 8-bit
 							// slot, we do allow it to be done (documentation!)
@@ -354,7 +352,7 @@ iiInitialize(i2eBordStrPtr pB)
 			// should always be consistent for IntelliPort-II.  Ditto below...
 			if (pB->i2ePom.e.porPorts1 != 4)
 			{
-				COMPLETE(pB, I2EE_INCONSIST);
+				I2_COMPLETE(pB, I2EE_INCONSIST);
 			}
 			break;
 
@@ -364,7 +362,7 @@ iiInitialize(i2eBordStrPtr pB)
 			pB->i2eChannelMap[0] = 0xff;  // Eight port
 			if (pB->i2ePom.e.porPorts1 != 8)
 			{
-				COMPLETE(pB, I2EE_INCONSIST);
+				I2_COMPLETE(pB, I2EE_INCONSIST);
 			}
 			break;
 
@@ -373,7 +371,7 @@ iiInitialize(i2eBordStrPtr pB)
 			pB->i2eChannelMap[0] = 0x3f;  // Six Port
 			if (pB->i2ePom.e.porPorts1 != 6)
 			{
-				COMPLETE(pB, I2EE_INCONSIST);
+				I2_COMPLETE(pB, I2EE_INCONSIST);
 			}
 			break;
 		}
@@ -402,7 +400,7 @@ iiInitialize(i2eBordStrPtr pB)
 
 		if (itemp < 8 || itemp > 15)
 		{
-			COMPLETE(pB, I2EE_INCONSIST);
+			I2_COMPLETE(pB, I2EE_INCONSIST);
 		}
 		pB->i2eFifoSize = (1 << itemp);
 
@@ -450,26 +448,26 @@ iiInitialize(i2eBordStrPtr pB)
 		switch (pB->i2ePom.e.porBus & (POR_BUS_SLOT16 | POR_BUS_DIP16) )
 		{
 		case POR_BUS_SLOT16 | POR_BUS_DIP16:
-			pB->i2eDataWidth16 = YES;
+			pB->i2eDataWidth16 = true;
 			pB->i2eMaxIrq = 15;
 			break;
 
 		case POR_BUS_SLOT16:
-			pB->i2eDataWidth16 = NO;
+			pB->i2eDataWidth16 = false;
 			pB->i2eMaxIrq = 15;
 			break;
 
 		case 0:
 		case POR_BUS_DIP16:     // In an 8-bit slot, DIP switch don't care.
 		default:
-			pB->i2eDataWidth16 = NO;
+			pB->i2eDataWidth16 = false;
 			pB->i2eMaxIrq = 7;
 			break;
 		}
 		break;   // POR_ID_FIIEX case
 
 	default:    // Unknown type of board
-		COMPLETE(pB, I2EE_BAD_FAMILY);
+		I2_COMPLETE(pB, I2EE_BAD_FAMILY);
 		break;
 	}  // End the switch based on family
 
@@ -483,17 +481,14 @@ iiInitialize(i2eBordStrPtr pB)
 	{
 	case POR_BUS_T_ISA:
 	case POR_BUS_T_UNK:  // If the type of bus is undeclared, assume ok.
-		pB->i2eChangeIrq = YES;
-		break;
 	case POR_BUS_T_MCA:
 	case POR_BUS_T_EISA:
-		pB->i2eChangeIrq = NO;
 		break;
 	default:
-		COMPLETE(pB, I2EE_BADBUS);
+		I2_COMPLETE(pB, I2EE_BADBUS);
 	}
 
-	if (pB->i2eDataWidth16 == YES)
+	if (pB->i2eDataWidth16)
 	{
 		pB->i2eWriteBuf  = iiWriteBuf16;
 		pB->i2eReadBuf   = iiReadBuf16;
@@ -529,7 +524,7 @@ iiInitialize(i2eBordStrPtr pB)
 		break;
 
 	default:
-		COMPLETE(pB, I2EE_INCONSIST);
+		I2_COMPLETE(pB, I2EE_INCONSIST);
 	}
 
 	// Initialize state information.
@@ -549,7 +544,7 @@ iiInitialize(i2eBordStrPtr pB)
 	// Everything is ok now, return with good status/
 
 	pB->i2eValid = I2E_MAGIC;
-	COMPLETE(pB, I2EE_GOOD);
+	I2_COMPLETE(pB, I2EE_GOOD);
 }
 
 //******************************************************************************
@@ -658,7 +653,7 @@ ii2DelayIO(unsigned int mseconds)
 	while(mseconds--) {
 		int i = ii2DelValue;
 		while ( i-- ) {
-			INB ( ii2Safe );
+			inb(ii2Safe);
 		}
 	}
 }
@@ -709,11 +704,11 @@ iiWriteBuf16(i2eBordStrPtr pB, unsigned char *address, int count)
 {
 	// Rudimentary sanity checking here.
 	if (pB->i2eValid != I2E_MAGIC)
-		COMPLETE(pB, I2EE_INVALID);
+		I2_COMPLETE(pB, I2EE_INVALID);
 
-	OUTSW ( pB->i2eData, address, count);
+	I2_OUTSW(pB->i2eData, address, count);
 
-	COMPLETE(pB, I2EE_GOOD);
+	I2_COMPLETE(pB, I2EE_GOOD);
 }
 
 //******************************************************************************
@@ -738,11 +733,11 @@ iiWriteBuf8(i2eBordStrPtr pB, unsigned char *address, int count)
 {
 	/* Rudimentary sanity checking here */
 	if (pB->i2eValid != I2E_MAGIC)
-		COMPLETE(pB, I2EE_INVALID);
+		I2_COMPLETE(pB, I2EE_INVALID);
 
-	OUTSB ( pB->i2eData, address, count );
+	I2_OUTSB(pB->i2eData, address, count);
 
-	COMPLETE(pB, I2EE_GOOD);
+	I2_COMPLETE(pB, I2EE_GOOD);
 }
 
 //******************************************************************************
@@ -767,11 +762,11 @@ iiReadBuf16(i2eBordStrPtr pB, unsigned char *address, int count)
 {
 	// Rudimentary sanity checking here.
 	if (pB->i2eValid != I2E_MAGIC)
-		COMPLETE(pB, I2EE_INVALID);
+		I2_COMPLETE(pB, I2EE_INVALID);
 
-	INSW ( pB->i2eData, address, count);
+	I2_INSW(pB->i2eData, address, count);
 
-	COMPLETE(pB, I2EE_GOOD);
+	I2_COMPLETE(pB, I2EE_GOOD);
 }
 
 //******************************************************************************
@@ -796,11 +791,11 @@ iiReadBuf8(i2eBordStrPtr pB, unsigned char *address, int count)
 {
 	// Rudimentary sanity checking here.
 	if (pB->i2eValid != I2E_MAGIC)
-		COMPLETE(pB, I2EE_INVALID);
+		I2_COMPLETE(pB, I2EE_INVALID);
 
-	INSB ( pB->i2eData, address, count);
+	I2_INSB(pB->i2eData, address, count);
 
-	COMPLETE(pB, I2EE_GOOD);
+	I2_COMPLETE(pB, I2EE_GOOD);
 }
 
 //******************************************************************************
@@ -820,7 +815,7 @@ iiReadBuf8(i2eBordStrPtr pB, unsigned char *address, int count)
 static unsigned short
 iiReadWord16(i2eBordStrPtr pB)
 {
-	return (unsigned short)( INW(pB->i2eData) );
+	return inw(pB->i2eData);
 }
 
 //******************************************************************************
@@ -842,9 +837,9 @@ iiReadWord8(i2eBordStrPtr pB)
 {
 	unsigned short urs;
 
-	urs = INB ( pB->i2eData );
+	urs = inb(pB->i2eData);
 
-	return ( ( INB ( pB->i2eData ) << 8 ) | urs );
+	return (inb(pB->i2eData) << 8) | urs;
 }
 
 //******************************************************************************
@@ -865,7 +860,7 @@ iiReadWord8(i2eBordStrPtr pB)
 static void
 iiWriteWord16(i2eBordStrPtr pB, unsigned short value)
 {
-	WORD_TO(pB, (int)value);
+	outw((int)value, pB->i2eData);
 }
 
 //******************************************************************************
@@ -886,8 +881,8 @@ iiWriteWord16(i2eBordStrPtr pB, unsigned short value)
 static void
 iiWriteWord8(i2eBordStrPtr pB, unsigned short value)
 {
-	BYTE_TO(pB, (char)value);
-	BYTE_TO(pB, (char)(value >> 8) );
+	outb((char)value, pB->i2eData);
+	outb((char)(value >> 8), pB->i2eData);
 }
 
 //******************************************************************************
@@ -939,30 +934,30 @@ iiWaitForTxEmptyII(i2eBordStrPtr pB, int mSdelay)
 		// interrupts of any kind.
 
 
-		WRITE_LOCK_IRQSAVE(&Dl_spinlock,flags)
-		OUTB(pB->i2ePointer, SEL_COMMAND);
-		OUTB(pB->i2ePointer, SEL_CMD_SH);
+		write_lock_irqsave(&Dl_spinlock, flags);
+		outb(SEL_COMMAND, pB->i2ePointer);
+		outb(SEL_CMD_SH, pB->i2ePointer);
 
-		itemp = INB(pB->i2eStatus);
+		itemp = inb(pB->i2eStatus);
 
-		OUTB(pB->i2ePointer, SEL_COMMAND);
-		OUTB(pB->i2ePointer, SEL_CMD_UNSH);
+		outb(SEL_COMMAND, pB->i2ePointer);
+		outb(SEL_CMD_UNSH, pB->i2ePointer);
 
 		if (itemp & ST_IN_EMPTY)
 		{
-			UPDATE_FIFO_ROOM(pB);
-			WRITE_UNLOCK_IRQRESTORE(&Dl_spinlock,flags)
-			COMPLETE(pB, I2EE_GOOD);
+			I2_UPDATE_FIFO_ROOM(pB);
+			write_unlock_irqrestore(&Dl_spinlock, flags);
+			I2_COMPLETE(pB, I2EE_GOOD);
 		}
 
-		WRITE_UNLOCK_IRQRESTORE(&Dl_spinlock,flags)
+		write_unlock_irqrestore(&Dl_spinlock, flags);
 
 		if (mSdelay-- == 0)
 			break;
 
 		iiDelay(pB, 1);      /* 1 mS granularity on checking condition */
 	}
-	COMPLETE(pB, I2EE_TXE_TIME);
+	I2_COMPLETE(pB, I2EE_TXE_TIME);
 }
 
 //******************************************************************************
@@ -1002,21 +997,21 @@ iiWaitForTxEmptyIIEX(i2eBordStrPtr pB, int mSdelay)
 		// you will generally not want to service interrupts or in any way
 		// disrupt the assumptions implicit in the larger context.
 
-		WRITE_LOCK_IRQSAVE(&Dl_spinlock,flags)
+		write_lock_irqsave(&Dl_spinlock, flags);
 
-		if (INB(pB->i2eStatus) & STE_OUT_MT) {
-			UPDATE_FIFO_ROOM(pB);
-			WRITE_UNLOCK_IRQRESTORE(&Dl_spinlock,flags)
-			COMPLETE(pB, I2EE_GOOD);
+		if (inb(pB->i2eStatus) & STE_OUT_MT) {
+			I2_UPDATE_FIFO_ROOM(pB);
+			write_unlock_irqrestore(&Dl_spinlock, flags);
+			I2_COMPLETE(pB, I2EE_GOOD);
 		}
-		WRITE_UNLOCK_IRQRESTORE(&Dl_spinlock,flags)
+		write_unlock_irqrestore(&Dl_spinlock, flags);
 
 		if (mSdelay-- == 0)
 			break;
 
 		iiDelay(pB, 1);      // 1 mS granularity on checking condition
 	}
-	COMPLETE(pB, I2EE_TXE_TIME);
+	I2_COMPLETE(pB, I2EE_TXE_TIME);
 }
 
 //******************************************************************************
@@ -1038,8 +1033,8 @@ static int
 iiTxMailEmptyII(i2eBordStrPtr pB)
 {
 	int port = pB->i2ePointer;
-	OUTB ( port, SEL_OUTMAIL );
-	return ( INB(port) == 0 );
+	outb(SEL_OUTMAIL, port);
+	return inb(port) == 0;
 }
 
 //******************************************************************************
@@ -1060,7 +1055,7 @@ iiTxMailEmptyII(i2eBordStrPtr pB)
 static int
 iiTxMailEmptyIIEX(i2eBordStrPtr pB)
 {
-	return !(INB(pB->i2eStatus) & STE_OUT_MAIL);
+	return !(inb(pB->i2eStatus) & STE_OUT_MAIL);
 }
 
 //******************************************************************************
@@ -1084,10 +1079,10 @@ iiTrySendMailII(i2eBordStrPtr pB, unsigned char mail)
 {
 	int port = pB->i2ePointer;
 
-	OUTB(port, SEL_OUTMAIL);
-	if (INB(port) == 0) {
-		OUTB(port, SEL_OUTMAIL);
-		OUTB(port, mail);
+	outb(SEL_OUTMAIL, port);
+	if (inb(port) == 0) {
+		outb(SEL_OUTMAIL, port);
+		outb(mail, port);
 		return 1;
 	}
 	return 0;
@@ -1112,10 +1107,9 @@ iiTrySendMailII(i2eBordStrPtr pB, unsigned char mail)
 static int
 iiTrySendMailIIEX(i2eBordStrPtr pB, unsigned char mail)
 {
-	if(INB(pB->i2eStatus) & STE_OUT_MAIL) {
+	if (inb(pB->i2eStatus) & STE_OUT_MAIL)
 		return 0;
-	}
-	OUTB(pB->i2eXMail, mail);
+	outb(mail, pB->i2eXMail);
 	return 1;
 }
 
@@ -1136,9 +1130,9 @@ iiTrySendMailIIEX(i2eBordStrPtr pB, unsigned char mail)
 static unsigned short
 iiGetMailII(i2eBordStrPtr pB)
 {
-	if (HAS_MAIL(pB)) {
-		OUTB(pB->i2ePointer, SEL_INMAIL);
-		return INB(pB->i2ePointer);
+	if (I2_HAS_MAIL(pB)) {
+		outb(SEL_INMAIL, pB->i2ePointer);
+		return inb(pB->i2ePointer);
 	} else {
 		return NO_MAIL_HERE;
 	}
@@ -1161,11 +1155,10 @@ iiGetMailII(i2eBordStrPtr pB)
 static unsigned short
 iiGetMailIIEX(i2eBordStrPtr pB)
 {
-	if (HAS_MAIL(pB)) {
-		return INB(pB->i2eXMail);
-	} else {
+	if (I2_HAS_MAIL(pB))
+		return inb(pB->i2eXMail);
+	else
 		return NO_MAIL_HERE;
-	}
 }
 
 //******************************************************************************
@@ -1184,8 +1177,8 @@ iiGetMailIIEX(i2eBordStrPtr pB)
 static void
 iiEnableMailIrqII(i2eBordStrPtr pB)
 {
-	OUTB(pB->i2ePointer, SEL_MASK);
-	OUTB(pB->i2ePointer, ST_IN_MAIL);
+	outb(SEL_MASK, pB->i2ePointer);
+	outb(ST_IN_MAIL, pB->i2ePointer);
 }
 
 //******************************************************************************
@@ -1204,7 +1197,7 @@ iiEnableMailIrqII(i2eBordStrPtr pB)
 static void
 iiEnableMailIrqIIEX(i2eBordStrPtr pB)
 {
-	OUTB(pB->i2eXMask, MX_IN_MAIL);
+	outb(MX_IN_MAIL, pB->i2eXMask);
 }
 
 //******************************************************************************
@@ -1223,8 +1216,8 @@ iiEnableMailIrqIIEX(i2eBordStrPtr pB)
 static void
 iiWriteMaskII(i2eBordStrPtr pB, unsigned char value)
 {
-	OUTB(pB->i2ePointer, SEL_MASK);
-	OUTB(pB->i2ePointer, value);
+	outb(SEL_MASK, pB->i2ePointer);
+	outb(value, pB->i2ePointer);
 }
 
 //******************************************************************************
@@ -1243,7 +1236,7 @@ iiWriteMaskII(i2eBordStrPtr pB, unsigned char value)
 static void
 iiWriteMaskIIEX(i2eBordStrPtr pB, unsigned char value)
 {
-	OUTB(pB->i2eXMask, value);
+	outb(value, pB->i2eXMask);
 }
 
 //******************************************************************************
@@ -1354,9 +1347,8 @@ iiDownloadBlock ( i2eBordStrPtr pB, loadHdrStrPtr pSource, int isStandard)
 	// immediately and be harmless, though not strictly necessary.
 	itemp = MAX_DLOAD_ACK_TIME/10;
 	while (--itemp) {
-		if (HAS_INPUT(pB)) {
-			switch(BYTE_FROM(pB))
-			{
+		if (I2_HAS_INPUT(pB)) {
+			switch (inb(pB->i2eData)) {
 			case LOADWARE_OK:
 				pB->i2eState =
 					isStandard ? II_STATE_STDLOADED :II_STATE_LOADED;
diff --git a/drivers/char/ip2/i2ellis.h b/drivers/char/ip2/i2ellis.h
index 433305062fb8..c88a64e527aa 100644
--- a/drivers/char/ip2/i2ellis.h
+++ b/drivers/char/ip2/i2ellis.h
@@ -185,10 +185,6 @@ typedef struct _i2eBordStr
 						// The highest allowable IRQ, based on the
 						// slot size.
 
-	unsigned char  i2eChangeIrq;
-						// Whether tis valid to change IRQ's
-						// ISA = ok, EISA, MicroChannel, no
-
 	// Accelerators for various addresses on the board
 	int            i2eBase;        // I/O Address of the Board
 	int            i2eData;        // From here data transfers happen
@@ -431,12 +427,6 @@ typedef struct _i2eBordStr
 // Manifests for i2eBordStr:
 //-------------------------------------------
 
-#define YES 1
-#define NO  0
-
-#define NULLFUNC (void (*)(void))0
-#define NULLPTR (void *)0
-
 typedef void (*delayFunc_t)(unsigned int);
 
 // i2eValid
@@ -494,8 +484,8 @@ typedef void (*delayFunc_t)(unsigned int);
 
 // i2eUsingIrq
 //
-#define IRQ_UNDEFINED   0x1352  // No valid irq (or polling = 0) can ever
-								// promote to this!
+#define I2_IRQ_UNDEFINED	0x1352  /* No valid irq (or polling = 0) can
+					 * ever promote to this! */
 //------------------------------------------
 // Handy Macros for i2ellis.c and others
 // Note these are common to -II and -IIEX
@@ -504,41 +494,14 @@ typedef void (*delayFunc_t)(unsigned int);
 // Given a pointer to the board structure, does the input FIFO have any data or
 // not?
 //
-#define HAS_INPUT(pB)      !(INB(pB->i2eStatus) & ST_IN_EMPTY)
-#define HAS_NO_INPUT(pB)   (INB(pB->i2eStatus) & ST_IN_EMPTY)
-
-// Given a pointer to board structure, read a byte or word from the fifo
-//
-#define BYTE_FROM(pB)      (unsigned char)INB(pB->i2eData)
-#define WORD_FROM(pB)      (unsigned short)INW(pB->i2eData)
-
-// Given a pointer to board structure, is there room for any data to be written
-// to the data fifo?
-//
-#define HAS_OUTROOM(pB)    !(INB(pB->i2eStatus) & ST_OUT_FULL)
-#define HAS_NO_OUTROOM(pB) (INB(pB->i2eStatus) & ST_OUT_FULL)
-
-// Given a pointer to board structure, write a single byte to the fifo
-// structure. Note that for 16-bit interfaces, the high order byte is undefined
-// and unknown.
-//
-#define BYTE_TO(pB, c)     OUTB(pB->i2eData,(c))
-
-// Write a word to the fifo structure. For 8-bit interfaces, this may have
-// unknown results.
-//
-#define WORD_TO(pB, c)     OUTW(pB->i2eData,(c))
+#define I2_HAS_INPUT(pB)	!(inb(pB->i2eStatus) & ST_IN_EMPTY)
 
 // Given a pointer to the board structure, is there anything in the incoming
 // mailbox?
 //
-#define HAS_MAIL(pB)       (INB(pB->i2eStatus) & ST_IN_MAIL)
+#define I2_HAS_MAIL(pB)		(inb(pB->i2eStatus) & ST_IN_MAIL)
 
-#define UPDATE_FIFO_ROOM(pB)  (pB)->i2eFifoRemains=(pB)->i2eFifoSize
-
-// Handy macro to round up a number (like the buffer write and read routines do)
-// 
-#define ROUNDUP(number)    (((number)+1) & (~1))
+#define I2_UPDATE_FIFO_ROOM(pB)	((pB)->i2eFifoRemains = (pB)->i2eFifoSize)
 
 //------------------------------------------
 // Function Declarations for i2ellis.c
@@ -593,20 +556,11 @@ static int iiDownloadBlock(i2eBordStrPtr, loadHdrStrPtr, int);
 //
 static int iiDownloadAll(i2eBordStrPtr, loadHdrStrPtr, int, int);
 
-// Called indirectly always.  Needed externally so the routine might be
-// SPECIFIED as an argument to iiReset()
-//
-//static void ii2DelayIO(unsigned int);		// N-millisecond delay using
-											//hardware spin
-//static void ii2DelayTimer(unsigned int);	// N-millisecond delay using Linux
-											//timer
-
 // Many functions defined here return True if good, False otherwise, with an
 // error code in i2eError field. Here is a handy macro for setting the error
 // code and returning.
 //
-#define COMPLETE(pB,code) \
-	do { \
+#define I2_COMPLETE(pB,code) do { \
 		 pB->i2eError = code; \
 		 return (code == I2EE_GOOD);\
 	} while (0)
diff --git a/drivers/char/ip2/i2hw.h b/drivers/char/ip2/i2hw.h
index 15fe04e748f4..8aa6e7ab8d5b 100644
--- a/drivers/char/ip2/i2hw.h
+++ b/drivers/char/ip2/i2hw.h
@@ -129,7 +129,6 @@ registers, use byte operations only.
 //------------------------------------------------
 //
 #include "ip2types.h"
-#include "i2os.h"    /* For any o.s., compiler, or host-related issues */
 
 //-------------------------------------------------------------------------
 // Manifests for the I/O map:
@@ -644,5 +643,10 @@ typedef union _loadHdrStr
 #define ABS_BIGGEST_BOX 16    // Absolute the most ports per box
 #define ABS_MOST_PORTS  (ABS_MAX_BOXES * ABS_BIGGEST_BOX)
 
+#define I2_OUTSW(port, addr, count)	outsw((port), (addr), (((count)+1)/2))
+#define I2_OUTSB(port, addr, count)	outsb((port), (addr), (((count)+1))&-2)
+#define I2_INSW(port, addr, count)	insw((port), (addr), (((count)+1)/2))
+#define I2_INSB(port, addr, count)	insb((port), (addr), (((count)+1))&-2)
+
 #endif   // I2HW_H
 
diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c
index 9c25320121ef..938879cc7bcc 100644
--- a/drivers/char/ip2/i2lib.c
+++ b/drivers/char/ip2/i2lib.c
@@ -227,17 +227,17 @@ i2InitChannels ( i2eBordStrPtr pB, int nChannels, i2ChanStrPtr pCh)
 	i2ChanStrPtr *ppCh;
 	
 	if (pB->i2eValid != I2E_MAGIC) {
-		COMPLETE(pB, I2EE_BADMAGIC);
+		I2_COMPLETE(pB, I2EE_BADMAGIC);
 	}
 	if (pB->i2eState != II_STATE_STDLOADED) {
-		COMPLETE(pB, I2EE_BADSTATE);
+		I2_COMPLETE(pB, I2EE_BADSTATE);
 	}
 
-	LOCK_INIT(&pB->read_fifo_spinlock);
-	LOCK_INIT(&pB->write_fifo_spinlock);
-	LOCK_INIT(&pB->Dbuf_spinlock);
-	LOCK_INIT(&pB->Bbuf_spinlock);
-	LOCK_INIT(&pB->Fbuf_spinlock);
+	rwlock_init(&pB->read_fifo_spinlock);
+	rwlock_init(&pB->write_fifo_spinlock);
+	rwlock_init(&pB->Dbuf_spinlock);
+	rwlock_init(&pB->Bbuf_spinlock);
+	rwlock_init(&pB->Fbuf_spinlock);
 	
 	// NO LOCK needed yet - this is init
 
@@ -259,10 +259,10 @@ i2InitChannels ( i2eBordStrPtr pB, int nChannels, i2ChanStrPtr pCh)
 		if ( !(pB->i2eChannelMap[index >> 4] & (1 << (index & 0xf)) ) ) {
 			continue;
 		}
-		LOCK_INIT(&pCh->Ibuf_spinlock);
-		LOCK_INIT(&pCh->Obuf_spinlock);
-		LOCK_INIT(&pCh->Cbuf_spinlock);
-		LOCK_INIT(&pCh->Pbuf_spinlock);
+		rwlock_init(&pCh->Ibuf_spinlock);
+		rwlock_init(&pCh->Obuf_spinlock);
+		rwlock_init(&pCh->Cbuf_spinlock);
+		rwlock_init(&pCh->Pbuf_spinlock);
 		// NO LOCK needed yet - this is init
 		// Set up validity flag according to support level
 		if (pB->i2eGoodMap[index >> 4] & (1 << (index & 0xf)) ) {
@@ -347,7 +347,7 @@ i2InitChannels ( i2eBordStrPtr pB, int nChannels, i2ChanStrPtr pCh)
 	}
 	// No need to check for wrap here; this is initialization.
 	pB->i2Fbuf_stuff = stuffIndex;
-	COMPLETE(pB, I2EE_GOOD);
+	I2_COMPLETE(pB, I2EE_GOOD);
 
 }
 
@@ -374,7 +374,7 @@ i2DeQueueNeeds(i2eBordStrPtr pB, int type)
 
 	case  NEED_INLINE:
 
-		WRITE_LOCK_IRQSAVE(&pB->Dbuf_spinlock,flags);
+		write_lock_irqsave(&pB->Dbuf_spinlock, flags);
 		if ( pB->i2Dbuf_stuff != pB->i2Dbuf_strip)
 		{
 			queueIndex = pB->i2Dbuf_strip;
@@ -386,12 +386,12 @@ i2DeQueueNeeds(i2eBordStrPtr pB, int type)
 			pB->i2Dbuf_strip = queueIndex;
 			pCh->channelNeeds &= ~NEED_INLINE;
 		}
-		WRITE_UNLOCK_IRQRESTORE(&pB->Dbuf_spinlock,flags); 
+		write_unlock_irqrestore(&pB->Dbuf_spinlock, flags);
 		break;
 
 	case NEED_BYPASS:
 
-		WRITE_LOCK_IRQSAVE(&pB->Bbuf_spinlock,flags);
+		write_lock_irqsave(&pB->Bbuf_spinlock, flags);
 		if (pB->i2Bbuf_stuff != pB->i2Bbuf_strip)
 		{
 			queueIndex = pB->i2Bbuf_strip;
@@ -403,12 +403,12 @@ i2DeQueueNeeds(i2eBordStrPtr pB, int type)
 			pB->i2Bbuf_strip = queueIndex;
 			pCh->channelNeeds &= ~NEED_BYPASS;
 		}
-		WRITE_UNLOCK_IRQRESTORE(&pB->Bbuf_spinlock,flags); 
+		write_unlock_irqrestore(&pB->Bbuf_spinlock, flags);
 		break;
 	
 	case NEED_FLOW:
 
-		WRITE_LOCK_IRQSAVE(&pB->Fbuf_spinlock,flags);
+		write_lock_irqsave(&pB->Fbuf_spinlock, flags);
 		if (pB->i2Fbuf_stuff != pB->i2Fbuf_strip)
 		{
 			queueIndex = pB->i2Fbuf_strip;
@@ -420,7 +420,7 @@ i2DeQueueNeeds(i2eBordStrPtr pB, int type)
 			pB->i2Fbuf_strip = queueIndex;
 			pCh->channelNeeds &= ~NEED_FLOW;
 		}
-		WRITE_UNLOCK_IRQRESTORE(&pB->Fbuf_spinlock,flags); 
+		write_unlock_irqrestore(&pB->Fbuf_spinlock, flags);
 		break;
 	default:
 		printk(KERN_ERR "i2DeQueueNeeds called with bad type:%x\n",type);
@@ -453,7 +453,7 @@ i2QueueNeeds(i2eBordStrPtr pB, i2ChanStrPtr pCh, int type)
 
 	case NEED_INLINE:
 
-		WRITE_LOCK_IRQSAVE(&pB->Dbuf_spinlock,flags);
+		write_lock_irqsave(&pB->Dbuf_spinlock, flags);
 		if ( !(pCh->channelNeeds & NEED_INLINE) )
 		{
 			pCh->channelNeeds |= NEED_INLINE;
@@ -463,12 +463,12 @@ i2QueueNeeds(i2eBordStrPtr pB, i2ChanStrPtr pCh, int type)
 				queueIndex = 0;
 			pB->i2Dbuf_stuff = queueIndex;
 		}
-		WRITE_UNLOCK_IRQRESTORE(&pB->Dbuf_spinlock,flags); 
+		write_unlock_irqrestore(&pB->Dbuf_spinlock, flags);
 		break;
 
 	case NEED_BYPASS:
 
-		WRITE_LOCK_IRQSAVE(&pB->Bbuf_spinlock,flags);
+		write_lock_irqsave(&pB->Bbuf_spinlock, flags);
 		if ((type & NEED_BYPASS) && !(pCh->channelNeeds & NEED_BYPASS))
 		{
 			pCh->channelNeeds |= NEED_BYPASS;
@@ -478,12 +478,12 @@ i2QueueNeeds(i2eBordStrPtr pB, i2ChanStrPtr pCh, int type)
 				queueIndex = 0;
 			pB->i2Bbuf_stuff = queueIndex;
 		} 
-		WRITE_UNLOCK_IRQRESTORE(&pB->Bbuf_spinlock,flags); 
+		write_unlock_irqrestore(&pB->Bbuf_spinlock, flags);
 		break;
 
 	case NEED_FLOW:
 
-		WRITE_LOCK_IRQSAVE(&pB->Fbuf_spinlock,flags);
+		write_lock_irqsave(&pB->Fbuf_spinlock, flags);
 		if ((type & NEED_FLOW) && !(pCh->channelNeeds & NEED_FLOW))
 		{
 			pCh->channelNeeds |= NEED_FLOW;
@@ -493,7 +493,7 @@ i2QueueNeeds(i2eBordStrPtr pB, i2ChanStrPtr pCh, int type)
 				queueIndex = 0;
 			pB->i2Fbuf_stuff = queueIndex;
 		}
-		WRITE_UNLOCK_IRQRESTORE(&pB->Fbuf_spinlock,flags); 
+		write_unlock_irqrestore(&pB->Fbuf_spinlock, flags);
 		break;
 
 	case NEED_CREDIT:
@@ -562,9 +562,8 @@ i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
 	pB = pCh->pMyBord;
 
 	// Board must also exist, and THE INTERRUPT COMMAND ALREADY SENT
-	if (pB->i2eValid != I2E_MAGIC || pB->i2eUsingIrq == IRQ_UNDEFINED) {
+	if (pB->i2eValid != I2E_MAGIC || pB->i2eUsingIrq == I2_IRQ_UNDEFINED)
 		return -2;
-	}
 	// If the board has gone fatal, return bad, and also hit the trap routine if
 	// it exists.
 	if (pB->i2eFatal) {
@@ -620,13 +619,13 @@ i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
 			switch(type) {
 			case PTYPE_INLINE:
 				lock_var_p = &pCh->Obuf_spinlock;
-				WRITE_LOCK_IRQSAVE(lock_var_p,flags);
+				write_lock_irqsave(lock_var_p, flags);
 				stuffIndex = pCh->Obuf_stuff;
 				bufroom = pCh->Obuf_strip - stuffIndex;
 				break;
 			case PTYPE_BYPASS:
 				lock_var_p = &pCh->Cbuf_spinlock;
-				WRITE_LOCK_IRQSAVE(lock_var_p,flags);
+				write_lock_irqsave(lock_var_p, flags);
 				stuffIndex = pCh->Cbuf_stuff;
 				bufroom = pCh->Cbuf_strip - stuffIndex;
 				break;
@@ -645,7 +644,7 @@ i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
 				break; /* from for()- Enough room: goto proceed */
 			}
 			ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
-			WRITE_UNLOCK_IRQRESTORE(lock_var_p, flags);
+			write_unlock_irqrestore(lock_var_p, flags);
 		} else
 			ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
 
@@ -747,7 +746,7 @@ i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
 	{
 	case PTYPE_INLINE:
 		pCh->Obuf_stuff = stuffIndex;  // Store buffer pointer
-		WRITE_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags); 
+		write_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
 
 		pB->debugInlineQueued++;
 		// Add the channel pointer to list of channels needing service (first
@@ -757,7 +756,7 @@ i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
 
 	case PTYPE_BYPASS:
 		pCh->Cbuf_stuff = stuffIndex;  // Store buffer pointer
-		WRITE_UNLOCK_IRQRESTORE(&pCh->Cbuf_spinlock,flags); 
+		write_unlock_irqrestore(&pCh->Cbuf_spinlock, flags);
 
 		pB->debugBypassQueued++;
 		// Add the channel pointer to list of channels needing service (first
@@ -840,7 +839,7 @@ i2Input(i2ChanStrPtr pCh)
 		count = -1;
 		goto i2Input_exit;
 	}
-	WRITE_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags);
+	write_lock_irqsave(&pCh->Ibuf_spinlock, flags);
 
 	// initialize some accelerators and private copies
 	stripIndex = pCh->Ibuf_strip;
@@ -850,7 +849,7 @@ i2Input(i2ChanStrPtr pCh)
 	// If buffer is empty or requested data count was 0, (trivial case) return
 	// without any further thought.
 	if ( count == 0 ) {
-		WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+		write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
 		goto i2Input_exit;
 	}
 	// Adjust for buffer wrap
@@ -891,10 +890,10 @@ i2Input(i2ChanStrPtr pCh)
 
 	if ((pCh->sinceLastFlow += count) >= pCh->whenSendFlow) {
 		pCh->sinceLastFlow -= pCh->whenSendFlow;
-		WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+		write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
 		i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW);
 	} else {
-		WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+		write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
 	}
 
 i2Input_exit:
@@ -926,7 +925,7 @@ i2InputFlush(i2ChanStrPtr pCh)
 
 	ip2trace (CHANN, ITRC_INPUT, 10, 0);
 
-	WRITE_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags);
+	write_lock_irqsave(&pCh->Ibuf_spinlock, flags);
 	count = pCh->Ibuf_stuff - pCh->Ibuf_strip;
 
 	// Adjust for buffer wrap
@@ -947,10 +946,10 @@ i2InputFlush(i2ChanStrPtr pCh)
 	if ( (pCh->sinceLastFlow += count) >= pCh->whenSendFlow )
 	{
 		pCh->sinceLastFlow -= pCh->whenSendFlow;
-		WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+		write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
 		i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW);
 	} else {
-		WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+		write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
 	}
 
 	ip2trace (CHANN, ITRC_INPUT, 19, 1, count);
@@ -979,9 +978,9 @@ i2InputAvailable(i2ChanStrPtr pCh)
 
 
 	// initialize some accelerators and private copies
-	READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags);
+	read_lock_irqsave(&pCh->Ibuf_spinlock, flags);
 	count = pCh->Ibuf_stuff - pCh->Ibuf_strip;
-	READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+	read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
 
 	// Adjust for buffer wrap
 	if (count < 0)
@@ -1045,9 +1044,9 @@ i2Output(i2ChanStrPtr pCh, const char *pSource, int count)
 	while ( count > 0 ) {
 
 		// How much room in output buffer is there?
-		READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
+		read_lock_irqsave(&pCh->Obuf_spinlock, flags);
 		amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1;
-		READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
+		read_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
 		if (amountToMove < 0) {
 			amountToMove += OBUF_SIZE;
 		}
@@ -1075,7 +1074,7 @@ i2Output(i2ChanStrPtr pCh, const char *pSource, int count)
 		if ( !(pCh->flush_flags && i2RetryFlushOutput(pCh) ) 
 				&& amountToMove > 0 )
 		{
-			WRITE_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
+			write_lock_irqsave(&pCh->Obuf_spinlock, flags);
 			stuffIndex = pCh->Obuf_stuff;
       
 			// Had room to move some data: don't know whether the block size,
@@ -1102,7 +1101,7 @@ i2Output(i2ChanStrPtr pCh, const char *pSource, int count)
 			}
 			pCh->Obuf_stuff = stuffIndex;
 
-			WRITE_UNL